diff options
Diffstat (limited to 'drivers/extcon')
| -rw-r--r-- | drivers/extcon/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-arizona.c | 1816 |
3 files changed, 0 insertions, 1825 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index af58ebca2bf6..e3db936becfd 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -21,14 +21,6 @@ config EXTCON_ADC_JACK help Say Y here to enable extcon device driver based on ADC values. -config EXTCON_ARIZONA - tristate "Wolfson Arizona EXTCON support" - depends on MFD_ARIZONA && INPUT && SND_SOC - help - Say Y here to enable support for external accessory detection - with Wolfson Arizona devices. These are audio CODECs with - advanced audio accessory detection support. - config EXTCON_AXP288 tristate "X-Power AXP288 EXTCON support" depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index fe10a1b7d18b..1b390d934ca9 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_EXTCON) += extcon-core.o extcon-core-objs += extcon.o devres.o obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o -obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_FSA9480) += extcon-fsa9480.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c deleted file mode 100644 index aae82db542a5..000000000000 --- a/drivers/extcon/extcon-arizona.c +++ /dev/null @@ -1,1816 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * extcon-arizona.c - Extcon driver Wolfson Arizona devices - * - * Copyright (C) 2012-2014 Wolfson Microelectronics plc - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/gpio/consumer.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/property.h> -#include <linux/regulator/consumer.h> -#include <linux/extcon-provider.h> - -#include <sound/soc.h> - -#include <linux/mfd/arizona/core.h> -#include <linux/mfd/arizona/pdata.h> -#include <linux/mfd/arizona/registers.h> -#include <dt-bindings/mfd/arizona.h> - -#define ARIZONA_MAX_MICD_RANGE 8 - -#define ARIZONA_MICD_CLAMP_MODE_JDL 0x4 -#define ARIZONA_MICD_CLAMP_MODE_JDH 0x5 -#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9 -#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb - -#define ARIZONA_TST_CAP_DEFAULT 0x3 -#define ARIZONA_TST_CAP_CLAMP 0x1 - -#define ARIZONA_HPDET_MAX 10000 - -#define HPDET_DEBOUNCE 500 -#define DEFAULT_MICD_TIMEOUT 2000 - -#define ARIZONA_HPDET_WAIT_COUNT 15 -#define ARIZONA_HPDET_WAIT_DELAY_MS 20 - -#define QUICK_HEADPHONE_MAX_OHM 3 -#define MICROPHONE_MIN_OHM 1257 -#define MICROPHONE_MAX_OHM 30000 - -#define MICD_DBTIME_TWO_READINGS 2 -#define MICD_DBTIME_FOUR_READINGS 4 - -#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \ - ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \ - ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \ - ARIZONA_MICD_LVL_7) - -#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7) - -#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8) - -struct arizona_extcon_info { - struct device *dev; - struct arizona *arizona; - struct mutex lock; - struct regulator *micvdd; - struct input_dev *input; - - u16 last_jackdet; - - int micd_mode; - const struct arizona_micd_config *micd_modes; - int micd_num_modes; - - const struct arizona_micd_range *micd_ranges; - int num_micd_ranges; - - bool micd_reva; - bool micd_clamp; - - struct delayed_work hpdet_work; - struct delayed_work micd_detect_work; - struct delayed_work micd_timeout_work; - - bool hpdet_active; - bool hpdet_done; - bool hpdet_retried; - - int num_hpdet_res; - unsigned int hpdet_res[3]; - - bool mic; - bool detecting; - int jack_flips; - - int hpdet_ip_version; - - struct extcon_dev *edev; - - struct gpio_desc *micd_pol_gpio; -}; - -static const struct arizona_micd_config micd_default_modes[] = { - { ARIZONA_ACCDET_SRC, 1, 0 }, - { 0, 2, 1 }, -}; - -static const struct arizona_micd_range micd_default_ranges[] = { - { .max = 11, .key = BTN_0 }, - { .max = 28, .key = BTN_1 }, - { .max = 54, .key = BTN_2 }, - { .max = 100, .key = BTN_3 }, - { .max = 186, .key = BTN_4 }, - { .max = 430, .key = BTN_5 }, -}; - -/* The number of levels in arizona_micd_levels valid for button thresholds */ -#define ARIZONA_NUM_MICD_BUTTON_LEVELS 64 - -static const int arizona_micd_levels[] = { - 3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46, - 49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100, - 105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245, - 270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071, - 1257, 30000, -}; - -static const unsigned int arizona_cable[] = { - EXTCON_MECHANICAL, - EXTCON_JACK_MICROPHONE, - EXTCON_JACK_HEADPHONE, - EXTCON_JACK_LINE_OUT, - EXTCON_NONE, -}; - -static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info); - -static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info, - bool clamp) -{ - struct arizona *arizona = info->arizona; - unsigned int mask = 0, val = 0; - unsigned int cap_sel = 0; - int ret; - - switch (arizona->type) { - case WM8998: - case WM1814: - mask = 0; - break; - case WM5110: - case WM8280: - mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR | - ARIZONA_HP1L_SHRTI; - if (clamp) { - val = ARIZONA_HP1L_SHRTO; - cap_sel = ARIZONA_TST_CAP_CLAMP; - } else { - val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI; - cap_sel = ARIZONA_TST_CAP_DEFAULT; - } - - ret = regmap_update_bits(arizona->regmap, - ARIZONA_HP_TEST_CTRL_1, - ARIZONA_HP1_TST_CAP_SEL_MASK, - cap_sel); - if (ret != 0) - dev_warn(arizona->dev, - "Failed to set TST_CAP_SEL: %d\n", ret); - break; - default: - mask = ARIZONA_RMV_SHRT_HP1L; - if (clamp) - val = ARIZONA_RMV_SHRT_HP1L; - break; - } - - snd_soc_dapm_mutex_lock(arizona->dapm); - - arizona->hpdet_clamp = clamp; - - /* Keep the HP output stages disabled while doing the clamp */ - if (clamp) { - ret = regmap_update_bits(arizona->regmap, - ARIZONA_OUTPUT_ENABLES_1, - ARIZONA_OUT1L_ENA | - ARIZONA_OUT1R_ENA, 0); - if (ret != 0) - dev_warn(arizona->dev, - "Failed to disable headphone outputs: %d\n", - ret); - } - - if (mask) { - ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L, - mask, val); - if (ret != 0) - dev_warn(arizona->dev, "Failed to do clamp: %d\n", - ret); - - ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R, - mask, val); - if (ret != 0) - dev_warn(arizona->dev, "Failed to do clamp: %d\n", - ret); - } - - /* Restore the desired state while not doing the clamp */ - if (!clamp) { - ret = regmap_update_bits(arizona->regmap, - ARIZONA_OUTPUT_ENABLES_1, - ARIZONA_OUT1L_ENA | - ARIZONA_OUT1R_ENA, arizona->hp_ena); - if (ret != 0) - dev_warn(arizona->dev, - "Failed to restore headphone outputs: %d\n", - ret); - } - - snd_soc_dapm_mutex_unlock(arizona->dapm); -} - -static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) -{ - struct arizona *arizona = info->arizona; - - mode %= info->micd_num_modes; - - gpiod_set_value_cansleep(info->micd_pol_gpio, - info->micd_modes[mode].gpio); - - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_BIAS_SRC_MASK, - info->micd_modes[mode].bias << - ARIZONA_MICD_BIAS_SRC_SHIFT); - regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, - ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); - - info->micd_mode = mode; - - dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); -} - -static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) -{ - switch (info->micd_modes[0].bias) { - case 1: - return "MICBIAS1"; - case 2: - return "MICBIAS2"; - case 3: - return "MICBIAS3"; - default: - return "MICVDD"; - } -} - -static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - const char *widget = arizona_extcon_get_micbias(info); - struct snd_soc_dapm_context *dapm = arizona->dapm; - struct snd_soc_component *component = snd_soc_dapm_to_component(dapm); - int ret; - - ret = snd_soc_component_force_enable_pin(component, widget); - if (ret != 0) - dev_warn(arizona->dev, "Failed to enable %s: %d\n", - widget, ret); - - snd_soc_dapm_sync(dapm); - - if (!arizona->pdata.micd_force_micbias) { - ret = snd_soc_component_disable_pin(component, widget); - if (ret != 0) - dev_warn(arizona->dev, "Failed to disable %s: %d\n", - widget, ret); - - snd_soc_dapm_sync(dapm); - } -} - -static void arizona_start_mic(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - bool change; - int ret; - unsigned int mode; - - /* Microphone detection can't use idle mode */ - pm_runtime_get(info->dev); - - if (info->detecting) { - ret = regulator_allow_bypass(info->micvdd, false); - if (ret != 0) { - dev_err(arizona->dev, - "Failed to regulate MICVDD: %d\n", - ret); - } - } - - ret = regulator_enable(info->micvdd); - if (ret != 0) { - dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", - ret); - } - - if (info->micd_reva) { - const struct reg_sequence reva[] = { - { 0x80, 0x3 }, - { 0x294, 0x0 }, - { 0x80, 0x0 }, - }; - - regmap_multi_reg_write(arizona->regmap, reva, ARRAY_SIZE(reva)); - } - - if (info->detecting && arizona->pdata.micd_software_compare) - mode = ARIZONA_ACCDET_MODE_ADC; - else - mode = ARIZONA_ACCDET_MODE_MIC; - - regmap_update_bits(arizona->regmap, - ARIZONA_ACCESSORY_DETECT_MODE_1, - ARIZONA_ACCDET_MODE_MASK, mode); - - arizona_extcon_pulse_micbias(info); - - ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, - &change); - if (ret < 0) { - dev_err(arizona->dev, "Failed to enable micd: %d\n", ret); - } else if (!change) { - regulator_disable(info->micvdd); - pm_runtime_put_autosuspend(info->dev); - } -} - -static void arizona_stop_mic(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - const char *widget = arizona_extcon_get_micbias(info); - struct snd_soc_dapm_context *dapm = arizona->dapm; - struct snd_soc_component *component = snd_soc_dapm_to_component(dapm); - bool change = false; - int ret; - - ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_ENA, 0, - &change); - if (ret < 0) - dev_err(arizona->dev, "Failed to disable micd: %d\n", ret); - - ret = snd_soc_component_disable_pin(component, widget); - if (ret != 0) - dev_warn(arizona->dev, - "Failed to disable %s: %d\n", - widget, ret); - - snd_soc_dapm_sync(dapm); - - if (info->micd_reva) { - const struct reg_sequence reva[] = { - { 0x80, 0x3 }, - { 0x294, 0x2 }, - { 0x80, 0x0 }, - }; - - regmap_multi_reg_write(arizona->regmap, reva, ARRAY_SIZE(reva)); - } - - ret = regulator_allow_bypass(info->micvdd, true); - if (ret != 0) { - dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", - ret); - } - - if (change) { - regulator_disable(info->micvdd); - pm_runtime_mark_last_busy(info->dev); - pm_runtime_put_autosuspend(info->dev); - } -} - -static struct { - unsigned int threshold; - unsigned int factor_a; - unsigned int factor_b; -} arizona_hpdet_b_ranges[] = { - { 100, 5528, 362464 }, - { 169, 11084, 6186851 }, - { 169, 11065, 65460395 }, -}; - -#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb - -static struct { - int min; - int max; -} arizona_hpdet_c_ranges[] = { - { 0, 30 }, - { 8, 100 }, - { 100, 1000 }, - { 1000, 10000 }, -}; - -static int arizona_hpdet_read(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - unsigned int val, range; - int ret; - - ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); - if (ret != 0) { - dev_err(arizona->dev, "Failed to read HPDET status: %d\n", - ret); - return ret; - } - - switch (info->hpdet_ip_version) { - case 0: - if (!(val & ARIZONA_HP_DONE)) { - dev_err(arizona->dev, "HPDET did not complete: %x\n", - val); - return -EAGAIN; - } - - val &= ARIZONA_HP_LVL_MASK; - break; - - case 1: - if (!(val & ARIZONA_HP_DONE_B)) { - dev_err(arizona->dev, "HPDET did not complete: %x\n", - val); - return -EAGAIN; - } - - ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); - if (ret != 0) { - dev_err(arizona->dev, "Failed to read HP value: %d\n", - ret); - return -EAGAIN; - } - - regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, - &range); - range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) - >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; - - if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && - (val < arizona_hpdet_b_ranges[range].threshold || - val >= ARIZONA_HPDET_B_RANGE_MAX)) { - range++; - dev_dbg(arizona->dev, "Moving to HPDET range %d\n", - range); - regmap_update_bits(arizona->regmap, - ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_IMPEDANCE_RANGE_MASK, - range << - ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); - return -EAGAIN; - } - - /* If we go out of range report top of range */ - if (val < arizona_hpdet_b_ranges[range].threshold || - val >= ARIZONA_HPDET_B_RANGE_MAX) { - dev_dbg(arizona->dev, "Measurement out of range\n"); - return ARIZONA_HPDET_MAX; - } - - dev_dbg(arizona->dev, "HPDET read %d in range %d\n", - val, range); - - val = arizona_hpdet_b_ranges[range].factor_b - / ((val * 100) - - arizona_hpdet_b_ranges[range].factor_a); - break; - - case 2: - if (!(val & ARIZONA_HP_DONE_B)) { - dev_err(arizona->dev, "HPDET did not complete: %x\n", - val); - return -EAGAIN; - } - - val &= ARIZONA_HP_LVL_B_MASK; - /* Convert to ohms, the value is in 0.5 ohm increments */ - val /= 2; - - regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, - &range); - range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) - >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; - - /* Skip up a range, or report? */ - if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && - (val >= arizona_hpdet_c_ranges[range].max)) { - range++; - dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", - arizona_hpdet_c_ranges[range].min, - arizona_hpdet_c_ranges[range].max); - regmap_update_bits(arizona->regmap, - ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_IMPEDANCE_RANGE_MASK, - range << - ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); - return -EAGAIN; - } - - if (range && (val < arizona_hpdet_c_ranges[range].min)) { - dev_dbg(arizona->dev, "Reporting range boundary %d\n", - arizona_hpdet_c_ranges[range].min); - val = arizona_hpdet_c_ranges[range].min; - } - break; - - default: - dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", - info->hpdet_ip_version); - return -EINVAL; - } - - dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); - return val; -} - -static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading, - bool *mic) -{ - struct arizona *arizona = info->arizona; - int id_gpio = arizona->pdata.hpdet_id_gpio; - - if (!arizona->pdata.hpdet_acc_id) - return 0; - - /* - * If we're using HPDET for accessory identification we need - * to take multiple measurements, step through them in sequence. - */ - info->hpdet_res[info->num_hpdet_res++] = *reading; - - /* Only check the mic directly if we didn't already ID it */ - if (id_gpio && info->num_hpdet_res == 1) { - dev_dbg(arizona->dev, "Measuring mic\n"); - - regmap_update_bits(arizona->regmap, - ARIZONA_ACCESSORY_DETECT_MODE_1, - ARIZONA_ACCDET_MODE_MASK | - ARIZONA_ACCDET_SRC, - ARIZONA_ACCDET_MODE_HPR | - info->micd_modes[0].src); - - gpio_set_value_cansleep(id_gpio, 1); - - regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_POLL, ARIZONA_HP_POLL); - return -EAGAIN; - } - - /* OK, got both. Now, compare... */ - dev_dbg(arizona->dev, "HPDET measured %d %d\n", - info->hpdet_res[0], info->hpdet_res[1]); - - /* Take the headphone impedance for the main report */ - *reading = info->hpdet_res[0]; - - /* Sometimes we get false readings due to slow insert */ - if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) { - dev_dbg(arizona->dev, "Retrying high impedance\n"); - info->num_hpdet_res = 0; - info->hpdet_retried = true; - arizona_start_hpdet_acc_id(info); - pm_runtime_put(info->dev); - return -EAGAIN; - } - - /* - * If we measure the mic as high impedance - */ - if (!id_gpio || info->hpdet_res[1] > 50) { - dev_dbg(arizona->dev, "Detected mic\n"); - *mic = true; - info->detecting = true; - } else { - dev_dbg(arizona->dev, "Detected headphone\n"); - } - - /* Make sure everything is reset back to the real polarity */ - regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, - ARIZONA_ACCDET_SRC, info->micd_modes[0].src); - - return 0; -} - -static irqreturn_t arizona_hpdet_irq(int irq, void *data) -{ - struct arizona_extcon_info *info = data; - struct arizona *arizona = info->arizona; - int id_gpio = arizona->pdata.hpdet_id_gpio; - unsigned int report = EXTCON_JACK_HEADPHONE; - int ret, reading; - bool mic = false; - - mutex_lock(&info->lock); - - /* If we got a spurious IRQ for some reason then ignore it */ - if (!info->hpdet_active) { - dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); - mutex_unlock(&info->lock); - return IRQ_NONE; - } - - /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); - if (ret < 0) { - dev_err(arizona->dev, "Failed to check cable state: %d\n", - ret); - goto out; - } else if (!ret) { - dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); - goto done; - } - - ret = arizona_hpdet_read(info); - if (ret == -EAGAIN) - goto out; - else if (ret < 0) - goto done; - reading = ret; - - /* Reset back to starting range */ - regmap_update_bits(arizona->regmap, - ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, - 0); - - ret = arizona_hpdet_do_id(info, &reading, &mic); - if (ret == -EAGAIN) - goto out; - else if (ret < 0) - goto done; - - /* Report high impedence cables as line outputs */ - if (reading >= 5000) - report = EXTCON_JACK_LINE_OUT; - else - report = EXTCON_JACK_HEADPHONE; - - ret = extcon_set_state_sync(info->edev, report, true); - if (ret != 0) - dev_err(arizona->dev, "Failed to report HP/line: %d\n", - ret); - -done: - /* Reset back to starting range */ - regmap_update_bits(arizona->regmap, - ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, - 0); - - arizona_extcon_hp_clamp(info, false); - - if (id_gpio) - gpio_set_value_cansleep(id_gpio, 0); - - /* If we have a mic then reenable MICDET */ - if (mic || info->mic) - arizona_start_mic(info); - - if (info->hpdet_active) { - pm_runtime_put_autosuspend(info->dev); - info->hpdet_active = false; - } - - info->hpdet_done = true; - -out: - mutex_unlock(&info->lock); - - return IRQ_HANDLED; -} - -static void arizona_identify_headphone(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - int ret; - - if (info->hpdet_done) - return; - - dev_dbg(arizona->dev, "Starting HPDET\n"); - - /* Make sure we keep the device enabled during the measurement */ - pm_runtime_get(info->dev); - - info->hpdet_active = true; - - arizona_stop_mic(info); - - arizona_extcon_hp_clamp(info, true); - - ret = regmap_update_bits(arizona->regmap, - ARIZONA_ACCESSORY_DETECT_MODE_1, - ARIZONA_ACCDET_MODE_MASK, - arizona->pdata.hpdet_channel); - if (ret != 0) { - dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); - goto err; - } - - ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_POLL, ARIZONA_HP_POLL); - if (ret != 0) { - dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", - ret); - goto err; - } - - return; - -err: - arizona_extcon_hp_clamp(info, false); - pm_runtime_put_autosuspend(info->dev); - - /* Just report headphone */ - ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); - if (ret != 0) - dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); - - if (info->mic) - arizona_start_mic(info); - - info->hpdet_active = false; -} - -static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - int hp_reading = 32; - bool mic; - int ret; - - dev_dbg(arizona->dev, "Starting identification via HPDET\n"); - - /* Make sure we keep the device enabled during the measurement */ - pm_runtime_get_sync(info->dev); - - info->hpdet_active = true; - - arizona_extcon_hp_clamp(info, true); - - ret = regmap_update_bits(arizona->regmap, - ARIZONA_ACCESSORY_DETECT_MODE_1, - ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, - info->micd_modes[0].src | - arizona->pdata.hpdet_channel); - if (ret != 0) { - dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); - goto err; - } - - if (arizona->pdata.hpdet_acc_id_line) { - ret = regmap_update_bits(arizona->regmap, - ARIZONA_HEADPHONE_DETECT_1, - ARIZONA_HP_POLL, ARIZONA_HP_POLL); - if (ret != 0) { - dev_err(arizona->dev, - "Can't start HPDETL measurement: %d\n", - ret); - goto err; - } - } else { - arizona_hpdet_do_id(info, &hp_reading, &mic); - } - - return; - -err: - /* Just report headphone */ - ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); - if (ret != 0) - dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); - - info->hpdet_active = false; -} - -static void arizona_micd_timeout_work(struct work_struct *work) -{ - struct arizona_extcon_info *info = container_of(work, - struct arizona_extcon_info, - micd_timeout_work.work); - - mutex_lock(&info->lock); - - dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n"); - - info->detecting = false; - - arizona_identify_headphone(info); - - mutex_unlock(&info->lock); -} - -static int arizona_micd_adc_read(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - unsigned int val; - int ret; - - /* Must disable MICD before we read the ADCVAL */ - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_ENA, 0); - - ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_4, &val); - if (ret != 0) { - dev_err(arizona->dev, - "Failed to read MICDET_ADCVAL: %d\n", ret); - return ret; - } - - dev_dbg(arizona->dev, "MICDET_ADCVAL: %x\n", val); - - val &= ARIZONA_MICDET_ADCVAL_MASK; - if (val < ARRAY_SIZE(arizona_micd_levels)) - val = arizona_micd_levels[val]; - else - val = INT_MAX; - - if (val <= QUICK_HEADPHONE_MAX_OHM) - val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_0; - else if (val <= MICROPHONE_MIN_OHM) - val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_1; - else if (val <= MICROPHONE_MAX_OHM) - val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_8; - else - val = ARIZONA_MICD_LVL_8; - - return val; -} - -static int arizona_micd_read(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - unsigned int val = 0; - int ret, i; - - for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) { - ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); - if (ret != 0) { - dev_err(arizona->dev, - "Failed to read MICDET: %d\n", ret); - return ret; - } - - dev_dbg(arizona->dev, "MICDET: %x\n", val); - - if (!(val & ARIZONA_MICD_VALID)) { - dev_warn(arizona->dev, - "Microphone detection state invalid\n"); - return -EINVAL; - } - } - - if (i == 10 && !(val & MICD_LVL_0_TO_8)) { - dev_err(arizona->dev, "Failed to get valid MICDET value\n"); - return -EINVAL; - } - - return val; -} - -static int arizona_micdet_reading(void *priv) -{ - struct arizona_extcon_info *info = priv; - struct arizona *arizona = info->arizona; - int ret, val; - - if (info->detecting && arizona->pdata.micd_software_compare) - ret = arizona_micd_adc_read(info); - else - ret = arizona_micd_read(info); - if (ret < 0) - return ret; - - val = ret; - - /* Due to jack detect this should never happen */ - if (!(val & ARIZONA_MICD_STS)) { - dev_warn(arizona->dev, "Detected open circuit\n"); - info->mic = false; - info->detecting = false; - arizona_identify_headphone(info); - return 0; - } - - /* If we got a high impedence we should have a headset, report it. */ - if (val & ARIZONA_MICD_LVL_8) { - info->mic = true; - info->detecting = false; - - arizona_identify_headphone(info); - - ret = extcon_set_state_sync(info->edev, - EXTCON_JACK_MICROPHONE, true); - if (ret != 0) - dev_err(arizona->dev, "Headset report failed: %d\n", - ret); - - /* Don't need to regulate for button detection */ - ret = regulator_allow_bypass(info->micvdd, true); - if (ret != 0) { - dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", - ret); - } - - return 0; - } - - /* If we detected a lower impedence during initial startup - * then we probably have the wrong polarity, flip it. Don't - * do this for the lowest impedences to speed up detection of - * plain headphones. If both polarities report a low - * impedence then give up and report headphones. - */ - if (val & MICD_LVL_1_TO_7) { - if (info->jack_flips >= info->micd_num_modes * 10) { - dev_dbg(arizona->dev, "Detected HP/line\n"); - - info->detecting = false; - - arizona_identify_headphone(info); - } else { - info->micd_mode++; - if (info->micd_mode == info->micd_num_modes) - info->micd_mode = 0; - arizona_extcon_set_mode(info, info->micd_mode); - - info->jack_flips++; - - if (arizona->pdata.micd_software_compare) - regmap_update_bits(arizona->regmap, - ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_ENA, - ARIZONA_MICD_ENA); - - queue_delayed_work(system_power_efficient_wq, - &info->micd_timeout_work, - msecs_to_jiffies(arizona->pdata.micd_timeout)); - } - - return 0; - } - - /* - * If we're still detecting and we detect a short then we've - * got a headphone. - */ - dev_dbg(arizona->dev, "Headphone detected\n"); - info->detecting = false; - - arizona_identify_headphone(info); - - return 0; -} - -static int arizona_button_reading(void *priv) -{ - struct arizona_extcon_info *info = priv; - struct arizona *arizona = info->arizona; - int val, key, lvl, i; - - val = arizona_micd_read(info); - if (val < 0) - return val; - - /* - * If we're still detecting and we detect a short then we've - * got a headphone. Otherwise it's a button press. - */ - if (val & MICD_LVL_0_TO_7) { - if (info->mic) { - dev_dbg(arizona->dev, "Mic button detected\n"); - - lvl = val & ARIZONA_MICD_LVL_MASK; - lvl >>= ARIZONA_MICD_LVL_SHIFT; - - for (i = 0; i < info->num_micd_ranges; i++) - input_report_key(info->input, - info->micd_ranges[i].key, 0); - - if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) { - key = info->micd_ranges[ffs(lvl) - 1].key; - input_report_key(info->input, key, 1); - input_sync(info->input); - } else { - dev_err(arizona->dev, "Button out of range\n"); - } - } else { - dev_warn(arizona->dev, "Button with no mic: %x\n", - val); - } - } else { - dev_dbg(arizona->dev, "Mic button released\n"); - for (i = 0; i < info->num_micd_ranges; i++) - input_report_key(info->input, - info->micd_ranges[i].key, 0); - input_sync(info->input); - arizona_extcon_pulse_micbias(info); - } - - return 0; -} - -static void arizona_micd_detect(struct work_struct *work) -{ - struct arizona_extcon_info *info = container_of(work, - struct arizona_extcon_info, - micd_detect_work.work); - struct arizona *arizona = info->arizona; - int ret; - - cancel_delayed_work_sync(&info->micd_timeout_work); - - mutex_lock(&info->lock); - - /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); - if (ret < 0) { - dev_err(arizona->dev, "Failed to check cable state: %d\n", - ret); - mutex_unlock(&info->lock); - return; - } else if (!ret) { - dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n"); - mutex_unlock(&info->lock); - return; - } - - if (info->detecting) - arizona_micdet_reading(info); - else - arizona_button_reading(info); - - pm_runtime_mark_last_busy(info->dev); - mutex_unlock(&info->lock); -} - -static irqreturn_t arizona_micdet(int irq, void *data) -{ - struct arizona_extcon_info *info = data; - struct arizona *arizona = info->arizona; - int debounce = arizona->pdata.micd_detect_debounce; - - cancel_delayed_work_sync(&info->micd_detect_work); - cancel_delayed_work_sync(&info->micd_timeout_work); - - mutex_lock(&info->lock); - if (!info->detecting) - debounce = 0; - mutex_unlock(&info->lock); - - if (debounce) - queue_delayed_work(system_power_efficient_wq, - &info->micd_detect_work, - msecs_to_jiffies(debounce)); - else - arizona_micd_detect(&info->micd_detect_work.work); - - return IRQ_HANDLED; -} - -static void arizona_hpdet_work(struct work_struct *work) -{ - struct arizona_extcon_info *info = container_of(work, - struct arizona_extcon_info, - hpdet_work.work); - - mutex_lock(&info->lock); - arizona_start_hpdet_acc_id(info); - mutex_unlock(&info->lock); -} - -static int arizona_hpdet_wait(struct arizona_extcon_info *info) -{ - struct arizona *arizona = info->arizona; - unsigned int val; - int i, ret; - - for (i = 0; i < ARIZONA_HPDET_WAIT_COUNT; i++) { - ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, - &val); - if (ret) { - dev_err(arizona->dev, - "Failed to read HPDET state: %d\n", ret); - return ret; - } - - switch (info->hpdet_ip_version) { - case 0: - if (val & ARIZONA_HP_DONE) - return 0; - break; - default: - if (val & ARIZONA_HP_DONE_B) - return 0; - break; - } - - msleep(ARIZONA_HPDET_WAIT_DELAY_MS); - } - - dev_warn(arizona->dev, "HPDET did not appear to complete\n"); - - return -ETIMEDOUT; -} - -static irqreturn_t arizona_jackdet(int irq, void *data) -{ - struct arizona_extcon_info *info = data; - struct arizona *arizona = info->arizona; - unsigned int val, present, mask; - bool cancelled_hp, cancelled_mic; - int ret, i; - - cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work); - cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work); - - pm_runtime_get_sync(info->dev); - - mutex_lock(&info->lock); - - if (info->micd_clamp) { - mask = ARIZONA_MICD_CLAMP_STS; - present = 0; - } else { - mask = ARIZONA_JD1_STS; - if (arizona->pdata.jd_invert) - present = 0; - else - present = ARIZONA_JD1_STS; - } - - ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); - if (ret != 0) { - dev_err(arizona->dev, "Failed to read jackdet status: %d\n", - ret); - mutex_unlock(&info->lock); - pm_runtime_put_autosuspend(info->dev); - return IRQ_NONE; - } - - val &= mask; - if (val == info->last_jackdet) { - dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n"); - if (cancelled_hp) - queue_delayed_work(system_power_efficient_wq, - &info->hpdet_work, - msecs_to_jiffies(HPDET_DEBOUNCE)); - - if (cancelled_mic) { - int micd_timeout = arizona->pdata.micd_timeout; - - queue_delayed_work(system_power_efficient_wq, - &info->micd_timeout_work, - msecs_to_jiffies(micd_timeout)); - } - - goto out; - } - info->last_jackdet = val; - - if (info->last_jackdet == present) { - dev_dbg(arizona->dev, "Detected jack\n"); - ret = extcon_set_state_sync(info->edev, - EXTCON_MECHANICAL, true); - - if (ret != 0) - dev_err(arizona->dev, "Mechanical report failed: %d\n", - ret); - - info->detecting = true; - info->mic = false; - info->jack_flips = 0; - - if (!arizona->pdata.hpdet_acc_id) { - arizona_start_mic(info); - } else { - queue_delayed_work(system_power_efficient_wq, - &info->hpdet_work, - msecs_to_jiffies(HPDET_DEBOUNCE)); - } - - if (info->micd_clamp || !arizona->pdata.jd_invert) - regmap_update_bits(arizona->regmap, - ARIZONA_JACK_DETECT_DEBOUNCE, - ARIZONA_MICD_CLAMP_DB | - ARIZONA_JD1_DB, 0); - } else { - dev_dbg(arizona->dev, "Detected jack removal\n"); - - arizona_stop_mic(info); - - info->num_hpdet_res = 0; - for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) - info->hpdet_res[i] = 0; - info->mic = false; - info->hpdet_done = false; - info->hpdet_retried = false; - - for (i = 0; i < info->num_micd_ranges; i++) - input_report_key(info->input, - info->micd_ranges[i].key, 0); - input_sync(info->input); - - for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) { - ret = extcon_set_state_sync(info->edev, - arizona_cable[i], false); - if (ret != 0) - dev_err(arizona->dev, - "Removal report failed: %d\n", ret); - } - - /* - * If the jack was removed during a headphone detection we - * need to wait for the headphone detection to finish, as - * it can not be aborted. We don't want to be able to start - * a new headphone detection from a fresh insert until this - * one is finished. - */ - arizona_hpdet_wait(info); - - regmap_update_bits(arizona->regmap, - ARIZONA_JACK_DETECT_DEBOUNCE, - ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, - ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); - } - -out: - /* Clear trig_sts to make sure DCVDD is not forced up */ - regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, - ARIZONA_MICD_CLAMP_FALL_TRIG_STS | - ARIZONA_MICD_CLAMP_RISE_TRIG_STS | - ARIZONA_JD1_FALL_TRIG_STS | - ARIZONA_JD1_RISE_TRIG_STS); - - mutex_unlock(&info->lock); - - pm_runtime_mark_last_busy(info->dev); - pm_runtime_put_autosuspend(info->dev); - - return IRQ_HANDLED; -} - -/* Map a level onto a slot in the register bank */ -static void arizona_micd_set_level(struct arizona *arizona, int index, - unsigned int level) -{ - int reg; - unsigned int mask; - - reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2); - - if (!(index % 2)) { - mask = 0x3f00; - level <<= 8; - } else { - mask = 0x3f; - } - - /* Program the level itself */ - regmap_update_bits(arizona->regmap, reg, mask, level); -} - -static int arizona_extcon_get_micd_configs(struct device *dev, - struct arizona *arizona) -{ - const char * const prop = "wlf,micd-configs"; - const int entries_per_config = 3; - struct arizona_micd_config *micd_configs; - int nconfs, ret; - int i, j; - u32 *vals; - - nconfs = device_property_count_u32(arizona->dev, prop); - if (nconfs <= 0) - return 0; - - vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL); - if (!vals) - return -ENOMEM; - - ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs); - if (ret < 0) - goto out; - - nconfs /= entries_per_config; - micd_configs = devm_kcalloc(dev, nconfs, sizeof(*micd_configs), - GFP_KERNEL); - if (!micd_configs) { - ret = -ENOMEM; - goto out; - } - - for (i = 0, j = 0; i < nconfs; ++i) { - micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0; - micd_configs[i].bias = vals[j++]; - micd_configs[i].gpio = vals[j++]; - } - - arizona->pdata.micd_configs = micd_configs; - arizona->pdata.num_micd_configs = nconfs; - -out: - kfree(vals); - return ret; -} - -static int arizona_extcon_device_get_pdata(struct device *dev, - struct arizona *arizona) -{ - struct arizona_pdata *pdata = &arizona->pdata; - unsigned int val = ARIZONA_ACCDET_MODE_HPL; - int ret; - - device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val); - switch (val) { - case ARIZONA_ACCDET_MODE_HPL: - case ARIZONA_ACCDET_MODE_HPR: - pdata->hpdet_channel = val; - break; - default: - dev_err(arizona->dev, - "Wrong wlf,hpdet-channel DT value %d\n", val); - pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL; - } - - device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce", - &pdata->micd_detect_debounce); - - device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time", - &pdata->micd_bias_start_time); - - device_property_read_u32(arizona->dev, "wlf,micd-rate", - &pdata->micd_rate); - - device_property_read_u32(arizona->dev, "wlf,micd-dbtime", - &pdata->micd_dbtime); - - device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms", - &pdata->micd_timeout); - - pdata->micd_force_micbias = device_property_read_bool(arizona->dev, - "wlf,micd-force-micbias"); - - pdata->micd_software_compare = device_property_read_bool(arizona->dev, - "wlf,micd-software-compare"); - - pdata->jd_invert = device_property_read_bool(arizona->dev, - "wlf,jd-invert"); - - device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); - - pdata->jd_gpio5 = device_property_read_bool(arizona->dev, - "wlf,use-jd2"); - pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, - "wlf,use-jd2-nopull"); - - ret = arizona_extcon_get_micd_configs(dev, arizona); - if (ret < 0) - dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret); - - return 0; -} - -static int arizona_extcon_probe(struct platform_device *pdev) -{ - struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); - struct arizona_pdata *pdata = &arizona->pdata; - struct arizona_extcon_info *info; - unsigned int val; - unsigned int clamp_mode; - int jack_irq_fall, jack_irq_rise; - int ret, mode, i, j; - - if (!arizona->dapm || !arizona->dapm->card) - return -EPROBE_DEFER; - - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - if (!dev_get_platdata(arizona->dev)) - arizona_extcon_device_get_pdata(&pdev->dev, arizona); - - info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD"); - if (IS_ERR(info->micvdd)) { - ret = PTR_ERR(info->micvdd); - dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); - return ret; - } - - mutex_init(&info->lock); - info->arizona = arizona; - info->dev = &pdev->dev; - info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS); - INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); - INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect); - INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work); - platform_set_drvdata(pdev, info); - - switch (arizona->type) { - case WM5102: - switch (arizona->rev) { - case 0: - info->micd_reva = true; - break; - default: - info->micd_clamp = true; - info->hpdet_ip_version = 1; - break; - } - break; - case WM5110: - case WM8280: - switch (arizona->rev) { - case 0 ... 2: - break; - default: - info->micd_clamp = true; - info->hpdet_ip_version = 2; - break; - } - break; - case WM8998: - case WM1814: - info->micd_clamp = true; - info->hpdet_ip_version = 2; - break; - default: - break; - } - - info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable); - if (IS_ERR(info->edev)) { - dev_err(&pdev->dev, "failed to allocate extcon device\n"); - return -ENOMEM; - } - - ret = devm_extcon_dev_register(&pdev->dev, info->edev); - if (ret < 0) { - dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", - ret); - return ret; - } - - info->input = devm_input_allocate_device(&pdev->dev); - if (!info->input) { - dev_err(arizona->dev, "Can't allocate input dev\n"); - ret = -ENOMEM; - return ret; - } - - info->input->name = "Headset"; - info->input->phys = "arizona/extcon"; - - if (!pdata->micd_timeout) - pdata->micd_timeout = DEFAULT_MICD_TIMEOUT; - - if (pdata->num_micd_configs) { - info->micd_modes = pdata->micd_configs; - info->micd_num_modes = pdata->num_micd_configs; - } else { - info->micd_modes = micd_default_modes; - info->micd_num_modes = ARRAY_SIZE(micd_default_modes); - } - - if (arizona->pdata.gpsw > 0) - regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1, - ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw); - - if (pdata->micd_pol_gpio > 0) { - if (info->micd_modes[0].gpio) - mode = GPIOF_OUT_INIT_HIGH; - else - mode = GPIOF_OUT_INIT_LOW; - - ret = devm_gpio_request_one(&pdev->dev, pdata->micd_pol_gpio, - mode, "MICD polarity"); - if (ret != 0) { - dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", - pdata->micd_pol_gpio, ret); - return ret; - } - - info->micd_pol_gpio = gpio_to_desc(pdata->micd_pol_gpio); - } else { - if (info->micd_modes[0].gpio) - mode = GPIOD_OUT_HIGH; - else - mode = GPIOD_OUT_LOW; - - /* We can't use devm here because we need to do the get - * against the MFD device, as that is where the of_node - * will reside, but if we devm against that the GPIO - * will not be freed if the extcon driver is unloaded. - */ - info->micd_pol_gpio = gpiod_get_optional(arizona->dev, - "wlf,micd-pol", - GPIOD_OUT_LOW); - if (IS_ERR(info->micd_pol_gpio)) { - ret = PTR_ERR(info->micd_pol_gpio); - dev_err(arizona->dev, - "Failed to get microphone polarity GPIO: %d\n", - ret); - return ret; - } - } - - if (arizona->pdata.hpdet_id_gpio > 0) { - ret = devm_gpio_request_one(&pdev->dev, - arizona->pdata.hpdet_id_gpio, - GPIOF_OUT_INIT_LOW, - "HPDET"); - if (ret != 0) { - dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", - arizona->pdata.hpdet_id_gpio, ret); - goto err_gpio; - } - } - - if (arizona->pdata.micd_bias_start_time) - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_BIAS_STARTTIME_MASK, - arizona->pdata.micd_bias_start_time - << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); - - if (arizona->pdata.micd_rate) - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_RATE_MASK, - arizona->pdata.micd_rate - << ARIZONA_MICD_RATE_SHIFT); - - switch (arizona->pdata.micd_dbtime) { - case MICD_DBTIME_FOUR_READINGS: - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_DBTIME_MASK, - ARIZONA_MICD_DBTIME); - break; - case MICD_DBTIME_TWO_READINGS: - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_DBTIME_MASK, 0); - break; - default: - break; - } - - BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) < - ARIZONA_NUM_MICD_BUTTON_LEVELS); - - if (arizona->pdata.num_micd_ranges) { - info->micd_ranges = pdata->micd_ranges; - info->num_micd_ranges = pdata->num_micd_ranges; - } else { - info->micd_ranges = micd_default_ranges; - info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges); - } - - if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) { - dev_err(arizona->dev, "Too many MICD ranges: %d\n", - arizona->pdata.num_micd_ranges); - } - - if (info->num_micd_ranges > 1) { - for (i = 1; i < info->num_micd_ranges; i++) { - if (info->micd_ranges[i - 1].max > - info->micd_ranges[i].max) { - dev_err(arizona->dev, - "MICD ranges must be sorted\n"); - ret = -EINVAL; - goto err_gpio; - } - } - } - - /* Disable all buttons by default */ - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, - ARIZONA_MICD_LVL_SEL_MASK, 0x81); - - /* Set up all the buttons the user specified */ - for (i = 0; i < info->num_micd_ranges; i++) { - for (j = 0; j < ARIZONA_NUM_MICD_BUTTON_LEVELS; j++) - if (arizona_micd_levels[j] >= info->micd_ranges[i].max) - break; - - if (j == ARIZONA_NUM_MICD_BUTTON_LEVELS) { - dev_err(arizona->dev, "Unsupported MICD level %d\n", - info->micd_ranges[i].max); - ret = -EINVAL; - goto err_gpio; - } - - dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n", - arizona_micd_levels[j], i); - - arizona_micd_set_level(arizona, i, j); - input_set_capability(info->input, EV_KEY, - info->micd_ranges[i].key); - - /* Enable reporting of that range */ - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, - 1 << i, 1 << i); - } - - /* Set all the remaining keys to a maximum */ - for (; i < ARIZONA_MAX_MICD_RANGE; i++) - arizona_micd_set_level(arizona, i, 0x3f); - - /* - * If we have a clamp use it, activating in conjunction with - * GPIO5 if that is connected for jack detect operation. - */ - if (info->micd_clamp) { - if (arizona->pdata.jd_gpio5) { - /* Put the GPIO into input mode with optional pull */ - val = 0xc101; - if (arizona->pdata.jd_gpio5_nopull) - val &= ~ARIZONA_GPN_PU; - - regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, - val); - - if (arizona->pdata.jd_invert) - clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H; - else - clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H; - } else { - if (arizona->pdata.jd_invert) - clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH; - else - clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL; - } - - regmap_update_bits(arizona->regmap, - ARIZONA_MICD_CLAMP_CONTROL, - ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode); - - regmap_update_bits(arizona->regmap, - ARIZONA_JACK_DETECT_DEBOUNCE, - ARIZONA_MICD_CLAMP_DB, - ARIZONA_MICD_CLAMP_DB); - } - - arizona_extcon_set_mode(info, 0); - - pm_runtime_enable(&pdev->dev); - pm_runtime_idle(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - - if (info->micd_clamp) { - jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; - jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; - } else { - jack_irq_rise = ARIZONA_IRQ_JD_RISE; - jack_irq_fall = ARIZONA_IRQ_JD_FALL; - } - - ret = arizona_request_irq(arizona, jack_irq_rise, - "JACKDET rise", arizona_jackdet, info); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", - ret); - goto err_pm; - } - - ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", - ret); - goto err_rise; - } - - ret = arizona_request_irq(arizona, jack_irq_fall, - "JACKDET fall", arizona_jackdet, info); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); - goto err_rise_wake; - } - - ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", - ret); - goto err_fall; - } - - ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, - "MICDET", arizona_micdet, info); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); - goto err_fall_wake; - } - - ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, - "HPDET", arizona_hpdet_irq, info); - if (ret != 0) { - dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); - goto err_micdet; - } - - arizona_clk32k_enable(arizona); - regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, - ARIZONA_JD1_DB, ARIZONA_JD1_DB); - regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, - ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); - - ret = regulator_allow_bypass(info->micvdd, true); - if (ret != 0) - dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", - ret); - - ret = input_register_device(info->input); - if (ret) { - dev_err(&pdev->dev, "Can't register input device: %d\n", ret); - goto err_hpdet; - } - - pm_runtime_put(&pdev->dev); - - return 0; - -err_hpdet: - arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); -err_micdet: - arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); -err_fall_wake: - arizona_set_irq_wake(arizona, jack_irq_fall, 0); -err_fall: - arizona_free_irq(arizona, jack_irq_fall, info); -err_rise_wake: - arizona_set_irq_wake(arizona, jack_irq_rise, 0); -err_rise: - arizona_free_irq(arizona, jack_irq_rise, info); -err_pm: - pm_runtime_put(&pdev->dev); - pm_runtime_disable(&pdev->dev); -err_gpio: - gpiod_put(info->micd_pol_gpio); - return ret; -} - -static int arizona_extcon_remove(struct platform_device *pdev) -{ - struct arizona_extcon_info *info = platform_get_drvdata(pdev); - struct arizona *arizona = info->arizona; - int jack_irq_rise, jack_irq_fall; - bool change; - int ret; - - ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_ENA, 0, - &change); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n", - ret); - } else if (change) { - regulator_disable(info->micvdd); - pm_runtime_put(info->dev); - } - - gpiod_put(info->micd_pol_gpio); - - pm_runtime_disable(&pdev->dev); - - regmap_update_bits(arizona->regmap, - ARIZONA_MICD_CLAMP_CONTROL, - ARIZONA_MICD_CLAMP_MODE_MASK, 0); - - if (info->micd_clamp) { - jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; - jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; - } else { - jack_irq_rise = ARIZONA_IRQ_JD_RISE; - jack_irq_fall = ARIZONA_IRQ_JD_FALL; - } - - arizona_set_irq_wake(arizona, jack_irq_rise, 0); - arizona_set_irq_wake(arizona, jack_irq_fall, 0); - arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); - arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); - arizona_free_irq(arizona, jack_irq_rise, info); - arizona_free_irq(arizona, jack_irq_fall, info); - cancel_delayed_work_sync(&info->hpdet_work); - regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, - ARIZONA_JD1_ENA, 0); - arizona_clk32k_disable(arizona); - - return 0; -} - -static struct platform_driver arizona_extcon_driver = { - .driver = { - .name = "arizona-extcon", - }, - .probe = arizona_extcon_probe, - .remove = arizona_extcon_remove, -}; - -module_platform_driver(arizona_extcon_driver); - -MODULE_DESCRIPTION("Arizona Extcon driver"); -MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:extcon-arizona"); |