diff options
Diffstat (limited to 'drivers/edac')
| -rw-r--r-- | drivers/edac/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/edac/Makefile | 1 | ||||
| -rw-r--r-- | drivers/edac/tile_edac.c | 254 |
3 files changed, 264 insertions, 1 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index fe70a341bd8b..fac1a2002e67 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -7,7 +7,7 @@ menuconfig EDAC bool "EDAC (Error Detection And Correction) reporting" depends on HAS_IOMEM - depends on X86 || PPC + depends on X86 || PPC || TILE help EDAC is designed to report errors in the core system. These are low-level errors that are reported in the CPU or @@ -282,4 +282,12 @@ config EDAC_CPC925 a companion chip to the PowerPC 970 family of processors. +config EDAC_TILE + tristate "Tilera Memory Controller" + depends on EDAC_MM_EDAC && TILE + default y + help + Support for error detection and correction on the + Tilera memory controller. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index ba2898b3639b..3e239133e29e 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o +obj-$(CONFIG_EDAC_TILE) += tile_edac.o diff --git a/drivers/edac/tile_edac.c b/drivers/edac/tile_edac.c new file mode 100644 index 000000000000..1d5cf06f6c6b --- /dev/null +++ b/drivers/edac/tile_edac.c @@ -0,0 +1,254 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Tilera-specific EDAC driver. + * + * This source code is derived from the following driver: + * + * Cell MIC driver for ECC counting + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/edac.h> +#include <hv/hypervisor.h> +#include <hv/drv_mshim_intf.h> + +#include "edac_core.h" + +#define DRV_NAME "tile-edac" + +/* Number of cs_rows needed per memory controller on TILEPro. */ +#define TILE_EDAC_NR_CSROWS 1 + +/* Number of channels per memory controller on TILEPro. */ +#define TILE_EDAC_NR_CHANS 1 + +/* Granularity of reported error in bytes on TILEPro. */ +#define TILE_EDAC_ERROR_GRAIN 8 + +/* TILE processor has multiple independent memory controllers. */ +struct platform_device *mshim_pdev[TILE_MAX_MSHIMS]; + +struct tile_edac_priv { + int hv_devhdl; /* Hypervisor device handle. */ + int node; /* Memory controller instance #. */ + unsigned int ce_count; /* + * Correctable-error counter + * kept by the driver. + */ +}; + +static void tile_edac_check(struct mem_ctl_info *mci) +{ + struct tile_edac_priv *priv = mci->pvt_info; + struct mshim_mem_error mem_error; + + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_error, + sizeof(struct mshim_mem_error), MSHIM_MEM_ERROR_OFF) != + sizeof(struct mshim_mem_error)) { + pr_err(DRV_NAME ": MSHIM_MEM_ERROR_OFF pread failure.\n"); + return; + } + + /* Check if the current error count is different from the saved one. */ + if (mem_error.sbe_count != priv->ce_count) { + dev_dbg(mci->dev, "ECC CE err on node %d\n", priv->node); + priv->ce_count = mem_error.sbe_count; + edac_mc_handle_ce(mci, 0, 0, 0, 0, 0, mci->ctl_name); + } +} + +/* + * Initialize the 'csrows' table within the mci control structure with the + * addressing of memory. + */ +static int __devinit tile_edac_init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow = &mci->csrows[0]; + struct tile_edac_priv *priv = mci->pvt_info; + struct mshim_mem_info mem_info; + + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_info, + sizeof(struct mshim_mem_info), MSHIM_MEM_INFO_OFF) != + sizeof(struct mshim_mem_info)) { + pr_err(DRV_NAME ": MSHIM_MEM_INFO_OFF pread failure.\n"); + return -1; + } + + if (mem_info.mem_ecc) + csrow->edac_mode = EDAC_SECDED; + else + csrow->edac_mode = EDAC_NONE; + switch (mem_info.mem_type) { + case DDR2: + csrow->mtype = MEM_DDR2; + break; + + case DDR3: + csrow->mtype = MEM_DDR3; + break; + + default: + return -1; + } + + csrow->first_page = 0; + csrow->nr_pages = mem_info.mem_size >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + csrow->nr_pages - 1; + csrow->grain = TILE_EDAC_ERROR_GRAIN; + csrow->dtype = DEV_UNKNOWN; + + return 0; +} + +static int __devinit tile_edac_mc_probe(struct platform_device *pdev) +{ + char hv_file[32]; + int hv_devhdl; + struct mem_ctl_info *mci; + struct tile_edac_priv *priv; + int rc; + + sprintf(hv_file, "mshim/%d", pdev->id); + hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0); + if (hv_devhdl < 0) + return -EINVAL; + + /* A TILE MC has a single channel and one chip-select row. */ + mci = edac_mc_alloc(sizeof(struct tile_edac_priv), + TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id); + if (mci == NULL) + return -ENOMEM; + priv = mci->pvt_info; + priv->node = pdev->id; + priv->hv_devhdl = hv_devhdl; + + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + + mci->mod_name = DRV_NAME; + mci->ctl_name = "TILEPro_Memory_Controller"; + mci->dev_name = dev_name(&pdev->dev); + mci->edac_check = tile_edac_check; + + /* + * Initialize the MC control structure 'csrows' table + * with the mapping and control information. + */ + if (tile_edac_init_csrows(mci)) { + /* No csrows found. */ + mci->edac_cap = EDAC_FLAG_NONE; + } else { + mci->edac_cap = EDAC_FLAG_SECDED; + } + + platform_set_drvdata(pdev, mci); + + /* Register with EDAC core */ + rc = edac_mc_add_mc(mci); + if (rc) { + dev_err(&pdev->dev, "failed to register with EDAC core\n"); + edac_mc_free(mci); + return rc; + } + + return 0; +} + +static int __devexit tile_edac_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + if (mci) + edac_mc_free(mci); + return 0; +} + +static struct platform_driver tile_edac_mc_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = tile_edac_mc_probe, + .remove = __devexit_p(tile_edac_mc_remove), +}; + +/* + * Driver init routine. + */ +static int __init tile_edac_init(void) +{ + char hv_file[32]; + struct platform_device *pdev; + int i, err, num = 0; + + /* Only support POLL mode. */ + edac_op_state = EDAC_OPSTATE_POLL; + + err = platform_driver_register(&tile_edac_mc_driver); + if (err) + return err; + + for (i = 0; i < TILE_MAX_MSHIMS; i++) { + /* + * Not all memory controllers are configured such as in the + * case of a simulator. So we register only those mshims + * that are configured by the hypervisor. + */ + sprintf(hv_file, "mshim/%d", i); + if (hv_dev_open((HV_VirtAddr)hv_file, 0) < 0) + continue; + + pdev = platform_device_register_simple(DRV_NAME, i, NULL, 0); + if (IS_ERR(pdev)) + continue; + mshim_pdev[i] = pdev; + num++; + } + + if (num == 0) { + platform_driver_unregister(&tile_edac_mc_driver); + return -ENODEV; + } + return 0; +} + +/* + * Driver cleanup routine. + */ +static void __exit tile_edac_exit(void) +{ + int i; + + for (i = 0; i < TILE_MAX_MSHIMS; i++) { + struct platform_device *pdev = mshim_pdev[i]; + if (!pdev) + continue; + + platform_set_drvdata(pdev, NULL); + platform_device_unregister(pdev); + } + platform_driver_unregister(&tile_edac_mc_driver); +} + +module_init(tile_edac_init); +module_exit(tile_edac_exit); |