diff options
Diffstat (limited to 'drivers/clk/tegra')
| -rw-r--r-- | drivers/clk/tegra/clk-pll.c | 505 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra114.c | 156 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra124.c | 156 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra210.c | 182 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra30.c | 113 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk.h | 17 |
6 files changed, 531 insertions, 598 deletions
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 4e194ecc8d5e..b3855360d6bc 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -191,6 +191,53 @@ #define PLLSS_REF_SRC_SEL_SHIFT 25 #define PLLSS_REF_SRC_SEL_MASK (3 << PLLSS_REF_SRC_SEL_SHIFT) +#define UTMIP_PLL_CFG1 0x484 +#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) +#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) + +#define UTMIP_PLL_CFG2 0x488 +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) +#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25) +#define UTMIP_PLL_CFG2_PHY_XTAL_CLOCKEN BIT(30) + +#define UTMIPLL_HW_PWRDN_CFG0 0x52c +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) +#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) +#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) + +#define PLLU_HW_PWRDN_CFG0 0x530 +#define PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL BIT(0) +#define PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define PLLU_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) +#define PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT BIT(7) +#define PLLU_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) +#define PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE BIT(28) + +#define XUSB_PLL_CFG0 0x534 +#define XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY 0x3ff +#define XUSB_PLL_CFG0_PLLU_LOCK_DLY (0x3ff << 14) + +#define PLLU_BASE_CLKENABLE_USB BIT(21) +#define PLLU_BASE_OVERRIDE BIT(24) + #define pll_readl(offset, p) readl_relaxed(p->clk_base + offset) #define pll_readl_base(p) pll_readl(p->params->base_reg, p) #define pll_readl_misc(p) pll_readl(p->params->misc_reg, p) @@ -973,6 +1020,133 @@ const struct clk_ops tegra_clk_plle_ops = { .enable = clk_plle_enable, }; +/* + * Structure defining the fields for USB UTMI clocks Parameters. + */ +struct utmi_clk_param { + /* Oscillator Frequency in Hz */ + u32 osc_frequency; + /* UTMIP PLL Enable Delay Count */ + u8 enable_delay_count; + /* UTMIP PLL Stable count */ + u8 stable_count; + /* UTMIP PLL Active delay count */ + u8 active_delay_count; + /* UTMIP PLL Xtal frequency count */ + u8 xtal_freq_count; +}; + +static const struct utmi_clk_param utmi_parameters[] = { + { + .osc_frequency = 13000000, .enable_delay_count = 0x02, + .stable_count = 0x33, .active_delay_count = 0x05, + .xtal_freq_count = 0x7f + }, { + .osc_frequency = 19200000, .enable_delay_count = 0x03, + .stable_count = 0x4b, .active_delay_count = 0x06, + .xtal_freq_count = 0xbb + }, { + .osc_frequency = 12000000, .enable_delay_count = 0x02, + .stable_count = 0x2f, .active_delay_count = 0x04, + .xtal_freq_count = 0x76 + }, { + .osc_frequency = 26000000, .enable_delay_count = 0x04, + .stable_count = 0x66, .active_delay_count = 0x09, + .xtal_freq_count = 0xfe + }, { + .osc_frequency = 16800000, .enable_delay_count = 0x03, + .stable_count = 0x41, .active_delay_count = 0x0a, + .xtal_freq_count = 0xa4 + }, { + .osc_frequency = 38400000, .enable_delay_count = 0x0, + .stable_count = 0x0, .active_delay_count = 0x6, + .xtal_freq_count = 0x80 + }, +}; + +static int clk_pllu_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct clk_hw *pll_ref = clk_hw_get_parent(hw); + struct clk_hw *osc = clk_hw_get_parent(pll_ref); + const struct utmi_clk_param *params = NULL; + unsigned long flags = 0, input_rate; + unsigned int i; + int ret = 0; + u32 value; + + if (!osc) { + pr_err("%s: failed to get OSC clock\n", __func__); + return -EINVAL; + } + + input_rate = clk_hw_get_rate(osc); + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); + if (ret < 0) + goto out; + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (input_rate == utmi_parameters[i].osc_frequency) { + params = &utmi_parameters[i]; + break; + } + } + + if (!params) { + pr_err("%s: unexpected input rate %lu Hz\n", __func__, + input_rate); + ret = -EINVAL; + goto out; + } + + value = pll_readl_base(pll); + value &= ~PLLU_BASE_OVERRIDE; + pll_writel_base(value, pll); + + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2); + /* Program UTMIP PLL stable and active counts */ + value &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + value |= UTMIP_PLL_CFG2_STABLE_COUNT(params->stable_count); + value &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + value |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(params->active_delay_count); + /* Remove power downs from UTMIP PLL control bits */ + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2); + + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1); + /* Program UTMIP PLL delay and oscillator frequency counts */ + value &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + value |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(params->enable_delay_count); + value &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + value |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(params->xtal_freq_count); + /* Remove power downs from UTMIP PLL control bits */ + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; + value &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1); + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static const struct clk_ops tegra_clk_pllu_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pllu_enable, + .disable = clk_pll_disable, + .recalc_rate = clk_pll_recalc_rate, +}; + static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params, unsigned long parent_rate) { @@ -1505,6 +1679,112 @@ static void clk_plle_tegra114_disable(struct clk_hw *hw) if (pll->lock) spin_unlock_irqrestore(pll->lock, flags); } + +static int clk_pllu_tegra114_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + const struct utmi_clk_param *params = NULL; + struct clk *osc = __clk_lookup("osc"); + unsigned long flags = 0, input_rate; + unsigned int i; + int ret = 0; + u32 value; + + if (!osc) { + pr_err("%s: failed to get OSC clock\n", __func__); + return -EINVAL; + } + + input_rate = clk_hw_get_rate(__clk_get_hw(osc)); + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); + if (ret < 0) + goto out; + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (input_rate == utmi_parameters[i].osc_frequency) { + params = &utmi_parameters[i]; + break; + } + } + + if (!params) { + pr_err("%s: unexpected input rate %lu Hz\n", __func__, + input_rate); + ret = -EINVAL; + goto out; + } + + value = pll_readl_base(pll); + value &= ~PLLU_BASE_OVERRIDE; + pll_writel_base(value, pll); + + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2); + /* Program UTMIP PLL stable and active counts */ + value &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + value |= UTMIP_PLL_CFG2_STABLE_COUNT(params->stable_count); + value &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + value |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(params->active_delay_count); + /* Remove power downs from UTMIP PLL control bits */ + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2); + + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1); + /* Program UTMIP PLL delay and oscillator frequency counts */ + value &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + value |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(params->enable_delay_count); + value &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + value |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(params->xtal_freq_count); + /* Remove power downs from UTMIP PLL control bits */ + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; + value &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; + value &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1); + + /* Setup HW control of UTMIPLL */ + value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + value |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; + value &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; + value |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; + writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1); + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1); + + udelay(1); + + /* + * Setup SW override of UTMIPLL assuming USB2.0 ports are assigned + * to USB2 + */ + value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + value |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; + value &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; + writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + + udelay(1); + + /* Enable HW control of UTMIPLL */ + value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + value |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; + writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} #endif static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base, @@ -1614,6 +1894,27 @@ struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, return clk; } +struct clk *tegra_clk_register_pllu(const char *name, const char *parent_name, + void __iomem *clk_base, unsigned long flags, + struct tegra_clk_pll_params *pll_params, spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_params->flags |= TEGRA_PLLU; + + pll = _tegra_init_pll(clk_base, NULL, pll_params, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllu_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + #if defined(CONFIG_ARCH_TEGRA_114_SOC) || \ defined(CONFIG_ARCH_TEGRA_124_SOC) || \ defined(CONFIG_ARCH_TEGRA_132_SOC) || \ @@ -1652,6 +1953,12 @@ static const struct clk_ops tegra_clk_plle_tegra114_ops = { .recalc_rate = clk_pll_recalc_rate, }; +static const struct clk_ops tegra_clk_pllu_tegra114_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pllu_tegra114_enable, + .disable = clk_pll_disable, + .recalc_rate = clk_pll_recalc_rate, +}; struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, @@ -1919,6 +2226,29 @@ struct clk *tegra_clk_register_plle_tegra114(const char *name, return clk; } + +struct clk * +tegra_clk_register_pllu_tegra114(const char *name, const char *parent_name, + void __iomem *clk_base, unsigned long flags, + struct tegra_clk_pll_params *pll_params, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_params->flags |= TEGRA_PLLU; + + pll = _tegra_init_pll(clk_base, NULL, pll_params, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllu_tegra114_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} #endif #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC) @@ -2187,6 +2517,152 @@ static int clk_plle_tegra210_is_enabled(struct clk_hw *hw) return val & PLLE_BASE_ENABLE ? 1 : 0; } +static int clk_pllu_tegra210_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct clk_hw *pll_ref = clk_hw_get_parent(hw); + struct clk_hw *osc = clk_hw_get_parent(pll_ref); + const struct utmi_clk_param *params = NULL; + unsigned long flags = 0, input_rate; + unsigned int i; + int ret = 0; + u32 value; + + if (!osc) { + pr_err("%s: failed to get OSC clock\n", __func__); + return -EINVAL; + } + + input_rate = clk_hw_get_rate(osc); + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); + if (ret < 0) + goto out; + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (input_rate == utmi_parameters[i].osc_frequency) { + params = &utmi_parameters[i]; + break; + } + } + + if (!params) { + pr_err("%s: unexpected input rate %lu Hz\n", __func__, + input_rate); + ret = -EINVAL; + goto out; + } + + value = pll_readl_base(pll); + value &= ~PLLU_BASE_OVERRIDE; + pll_writel_base(value, pll); + + /* Put PLLU under HW control */ + value = readl_relaxed(pll->clk_base + PLLU_HW_PWRDN_CFG0); + value |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE | + PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT | + PLLU_HW_PWRDN_CFG0_USE_LOCKDET; + value &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL | + PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL); + writel_relaxed(value, pll->clk_base + PLLU_HW_PWRDN_CFG0); + + value = readl_relaxed(pll->clk_base + XUSB_PLL_CFG0); + value &= ~XUSB_PLL_CFG0_PLLU_LOCK_DLY; + writel_relaxed(value, pll->clk_base + XUSB_PLL_CFG0); + + udelay(1); + + value = readl_relaxed(pll->clk_base + PLLU_HW_PWRDN_CFG0); + value |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE; + writel_relaxed(value, pll->clk_base + PLLU_HW_PWRDN_CFG0); + + udelay(1); + + /* Disable PLLU clock branch to UTMIPLL since it uses OSC */ + value = pll_readl_base(pll); + value &= ~PLLU_BASE_CLKENABLE_USB; + pll_writel_base(value, pll); + + value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + if (value & UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE) { + pr_debug("UTMIPLL already enabled\n"); + goto out; + } + + value &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; + writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + + /* Program UTMIP PLL stable and active counts */ + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2); + value &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + value |= UTMIP_PLL_CFG2_STABLE_COUNT(params->stable_count); + value &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + value |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(params->active_delay_count); + value |= UTMIP_PLL_CFG2_PHY_XTAL_CLOCKEN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL delay and oscillator frequency counts */ + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1); + value &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + value |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(params->enable_delay_count); + value &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + value |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(params->xtal_freq_count); + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1); + + /* Remove power downs from UTMIP PLL control bits */ + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1); + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + value |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; + writel(value, pll->clk_base + UTMIP_PLL_CFG1); + + udelay(1); + + /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */ + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2); + value |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP; + value |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP; + value |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2); + + /* Setup HW control of UTMIPLL */ + value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1); + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; + value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1); + + value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + value |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; + value &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; + writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + + udelay(1); + + value = readl_relaxed(pll->clk_base + XUSB_PLL_CFG0); + value &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY; + writel_relaxed(value, pll->clk_base + XUSB_PLL_CFG0); + + udelay(1); + + /* Enable HW control of UTMIPLL */ + value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + value |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; + writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0); + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + static const struct clk_ops tegra_clk_plle_tegra210_ops = { .is_enabled = clk_plle_tegra210_is_enabled, .enable = clk_plle_tegra210_enable, @@ -2194,6 +2670,13 @@ static const struct clk_ops tegra_clk_plle_tegra210_ops = { .recalc_rate = clk_pll_recalc_rate, }; +static const struct clk_ops tegra_clk_pllu_tegra210_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pllu_tegra210_enable, + .disable = clk_pll_disable, + .recalc_rate = clk_pllre_recalc_rate, +}; + struct clk *tegra_clk_register_plle_tegra210(const char *name, const char *parent_name, void __iomem *clk_base, unsigned long flags, @@ -2434,4 +2917,26 @@ struct clk *tegra_clk_register_pllmb(const char *name, const char *parent_name, return clk; } + +struct clk *tegra_clk_register_pllu_tegra210(const char *name, + const char *parent_name, void __iomem *clk_base, + unsigned long flags, struct tegra_clk_pll_params *pll_params, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_params->flags |= TEGRA_PLLU; + + pll = _tegra_init_pll(clk_base, NULL, pll_params, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllu_tegra210_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} #endif diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index b78054fac0a8..64da7b79a6e4 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -113,32 +113,6 @@ #define CCLKG_BURST_POLICY 0x368 -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) - -#define UTMIPLL_HW_PWRDN_CFG0 0x52c -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) -#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) -#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) -#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) -#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) - #define CLK_SOURCE_CSITE 0x1d4 #define CLK_SOURCE_EMC 0x19c @@ -649,43 +623,6 @@ static unsigned long tegra114_input_freq[] = { #define MASK(x) (BIT(x) - 1) -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u8 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u8 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x04, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - /* peripheral mux definitions */ static const char *mux_plld_out0_plld2_out0[] = { @@ -986,92 +923,9 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base) } -static __init void tegra114_utmi_param_configure(void __iomem *clk_base) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (osc_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected oscillator freq %lu\n", __func__, - osc_freq); - return; - } - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. - active_delay_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. - enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. - xtal_freq_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - /* Setup HW control of UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - udelay(1); - - /* Setup SW override of UTMIPLL assuming USB2.0 - ports are assigned to USB2 */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(1); - - /* Enable HW control UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); -} - static void __init tegra114_pll_init(void __iomem *clk_base, void __iomem *pmc) { - u32 val; struct clk *clk; /* PLLC */ @@ -1118,16 +972,10 @@ static void __init tegra114_pll_init(void __iomem *clk_base, CLK_SET_RATE_PARENT, 1, 1); /* PLLU */ - val = readl(clk_base + pll_u_params.base_reg); - val &= ~BIT(24); /* disable PLLU_OVERRIDE */ - writel(val, clk_base + pll_u_params.base_reg); - - clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0, - &pll_u_params, &pll_u_lock); + clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0, + &pll_u_params, &pll_u_lock); clks[TEGRA114_CLK_PLL_U] = clk; - tegra114_utmi_param_configure(clk_base); - /* PLLU_480M */ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u", CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index f4fbbf16a056..a112d3d2bff1 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -99,32 +99,6 @@ #define CCLKG_BURST_POLICY 0x368 -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) - -#define UTMIPLL_HW_PWRDN_CFG0 0x52c -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) -#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) -#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) -#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) -#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) -#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) - /* Tegra CPU clock and reset control regs */ #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 @@ -764,43 +738,6 @@ static struct tegra_clk_pll_params pll_u_params = { TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, }; -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u8 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u8 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x04, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true }, [tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true }, @@ -1063,88 +1000,6 @@ static struct tegra_devclk devclks[] __initdata = { static struct clk **clks; -static void tegra124_utmi_param_configure(void __iomem *clk_base) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (osc_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected oscillator freq %lu\n", __func__, - osc_freq); - return; - } - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. - active_delay_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. - enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. - xtal_freq_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - /* Setup HW control of UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - udelay(1); - - /* Setup SW override of UTMIPLL assuming USB2.0 - ports are assigned to USB2 */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(1); - - /* Enable HW control UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); -} - static __init void tegra124_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { @@ -1195,7 +1050,6 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base, static void __init tegra124_pll_init(void __iomem *clk_base, void __iomem *pmc) { - u32 val; struct clk *clk; /* PLLC */ @@ -1256,17 +1110,11 @@ static void __init tegra124_pll_init(void __iomem *clk_base, clks[TEGRA124_CLK_PLL_M_UD] = clk; /* PLLU */ - val = readl(clk_base + pll_u_params.base_reg); - val &= ~BIT(24); /* disable PLLU_OVERRIDE */ - writel(val, clk_base + pll_u_params.base_reg); - - clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0, - &pll_u_params, &pll_u_lock); + clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0, + &pll_u_params, &pll_u_lock); clk_register_clkdev(clk, "pll_u", NULL); clks[TEGRA124_CLK_PLL_U] = clk; - tegra124_utmi_param_configure(clk_base); - /* PLLU_480M */ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u", CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c index b4df5c46642f..2896d2e783ce 100644 --- a/drivers/clk/tegra/clk-tegra210.c +++ b/drivers/clk/tegra/clk-tegra210.c @@ -155,27 +155,6 @@ #define PMC_PLLM_WB0_OVERRIDE 0x1dc #define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) - #define SATA_PLL_CFG0 0x490 #define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) #define SATA_PLL_CFG0_PADPLL_USE_LOCKDET BIT(2) @@ -2038,47 +2017,6 @@ static struct tegra_clk_pll_params pll_u_vco_params = { .calc_rate = tegra210_pll_fixed_mdiv_cfg, }; -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u16 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u16 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 38400000, .enable_delay_count = 0x0, - .stable_count = 0x0, .active_delay_count = 0x6, - .xtal_freq_count = 0x80 - }, { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x08, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = { [tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true }, [tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true }, @@ -2348,114 +2286,6 @@ static struct tegra_audio_clk_info tegra210_audio_plls[] = { static struct clk **clks; -static void tegra210_utmi_param_configure(void __iomem *clk_base) -{ - u32 reg; - int i; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (osc_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected oscillator freq %lu\n", __func__, - osc_freq); - return; - } - - reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0); - reg |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE | - PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT | - PLLU_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL | - PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL); - writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0); - - reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0); - reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0); - udelay(1); - - reg = readl_relaxed(clk_base + PLLU_BASE); - reg &= ~PLLU_BASE_CLKENABLE_USB; - writel_relaxed(reg, clk_base + PLLU_BASE); - - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(10); - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. - active_delay_count); - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. - enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. - xtal_freq_count); - - reg |= UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - /* Remove power downs from UTMIP PLL control bits */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - udelay(1); - - /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP; - reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP; - reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Setup HW control of UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(1); - - reg = readl_relaxed(clk_base + XUSB_PLL_CFG0); - reg &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY; - writel_relaxed(reg, clk_base + XUSB_PLL_CFG0); - - udelay(1); - - /* Enable HW control UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); -} - static __init void tegra210_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { @@ -2523,7 +2353,6 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base, static void __init tegra210_pll_init(void __iomem *clk_base, void __iomem *pmc) { - u32 val; struct clk *clk; /* PLLC */ @@ -2583,12 +2412,9 @@ static void __init tegra210_pll_init(void __iomem *clk_base, clks[TEGRA210_CLK_PLL_M_UD] = clk; /* PLLU_VCO */ - val = readl(clk_base + pll_u_vco_params.base_reg); - val &= ~PLLU_BASE_OVERRIDE; /* disable PLLU_OVERRIDE */ - writel(val, clk_base + pll_u_vco_params.base_reg); - - clk = tegra_clk_register_pllre("pll_u_vco", "pll_ref", clk_base, pmc, - 0, &pll_u_vco_params, &pll_u_lock, pll_ref_freq); + clk = tegra_clk_register_pllu_tegra210("pll_u_vco", "pll_ref", + clk_base, 0, &pll_u_vco_params, + &pll_u_lock); clk_register_clkdev(clk, "pll_u_vco", NULL); clks[TEGRA210_CLK_PLL_U] = clk; @@ -2621,8 +2447,6 @@ static void __init tegra210_pll_init(void __iomem *clk_base, clk_register_clkdev(clk, "pll_u_out2", NULL); clks[TEGRA210_CLK_PLL_U_OUT2] = clk; - tegra210_utmi_param_configure(clk_base); - /* PLLU_480M */ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u_vco", CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 9396f4930da7..8e2db5ead8da 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -118,20 +118,6 @@ #define AUDIO_SYNC_DOUBLER 0x49c -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) - /* Tegra CPU clock and reset control regs */ #define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c #define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340 @@ -207,46 +193,6 @@ static DEFINE_SPINLOCK(emc_lock); static struct clk **clks; -/* - * Structure defining the fields for USB UTMI clocks Parameters. - */ -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u8 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u8 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x04, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { { 12000000, 1040000000, 520, 6, 1, 8 }, { 13000000, 1040000000, 480, 6, 1, 8 }, @@ -873,59 +819,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = { [tegra_clk_pll_a_out0] = { .dt_id = TEGRA30_CLK_PLL_A_OUT0, .present = true }, }; -static void tegra30_utmi_param_configure(void) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (input_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected input rate %lu\n", __func__, input_freq); - return; - } - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT( - utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT( - utmi_parameters[i].active_delay_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT( - utmi_parameters[i].enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT( - utmi_parameters[i].xtal_freq_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); -} - static const char *pll_e_parents[] = { "pll_ref", "pll_p" }; static void __init tegra30_pll_init(void) @@ -972,12 +865,10 @@ static void __init tegra30_pll_init(void) clks[TEGRA30_CLK_PLL_X_OUT0] = clk; /* PLLU */ - clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0, - &pll_u_params, NULL); + clk = tegra_clk_register_pllu("pll_u", "pll_ref", clk_base, 0, + &pll_u_params, NULL); clks[TEGRA30_CLK_PLL_U] = clk; - tegra30_utmi_param_configure(); - /* PLLD */ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0, &pll_d_params, &pll_d_lock); diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 9421f0310999..6ba82ecffd4d 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -427,6 +427,23 @@ struct clk *tegra_clk_register_pllmb(const char *name, const char *parent_name, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); +struct clk *tegra_clk_register_pllu(const char *name, const char *parent_name, + void __iomem *clk_base, unsigned long flags, + struct tegra_clk_pll_params *pll_params, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllu_tegra114(const char *name, + const char *parent_name, + void __iomem *clk_base, unsigned long flags, + struct tegra_clk_pll_params *pll_params, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllu_tegra210(const char *name, + const char *parent_name, + void __iomem *clk_base, unsigned long flags, + struct tegra_clk_pll_params *pll_params, + spinlock_t *lock); + /** * struct tegra_clk_pll_out - PLL divider down clock * |