summaryrefslogtreecommitdiff
path: root/drivers/clk/bcm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk/bcm')
-rw-r--r--drivers/clk/bcm/clk-bcm2835-aux.c4
-rw-r--r--drivers/clk/bcm/clk-bcm2835.c47
-rw-r--r--drivers/clk/bcm/clk-cygnus.c59
-rw-r--r--drivers/clk/bcm/clk-iproc-pll.c41
-rw-r--r--drivers/clk/bcm/clk-iproc.h43
5 files changed, 154 insertions, 40 deletions
diff --git a/drivers/clk/bcm/clk-bcm2835-aux.c b/drivers/clk/bcm/clk-bcm2835-aux.c
index e4f89e28b5ec..3a177ade6e6c 100644
--- a/drivers/clk/bcm/clk-bcm2835-aux.c
+++ b/drivers/clk/bcm/clk-bcm2835-aux.c
@@ -38,8 +38,8 @@ static int bcm2835_aux_clk_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(dev, res);
- if (!reg)
- return -ENODEV;
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
onecell = devm_kmalloc(dev, sizeof(*onecell), GFP_KERNEL);
if (!onecell)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 015e687ffabe..c74ed3fd496d 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -88,10 +88,23 @@
#define CM_HSMDIV 0x08c
#define CM_OTPCTL 0x090
#define CM_OTPDIV 0x094
+#define CM_PCMCTL 0x098
+#define CM_PCMDIV 0x09c
#define CM_PWMCTL 0x0a0
#define CM_PWMDIV 0x0a4
+#define CM_SLIMCTL 0x0a8
+#define CM_SLIMDIV 0x0ac
#define CM_SMICTL 0x0b0
#define CM_SMIDIV 0x0b4
+/* no definition for 0x0b8 and 0x0bc */
+#define CM_TCNTCTL 0x0c0
+#define CM_TCNTDIV 0x0c4
+#define CM_TECCTL 0x0c8
+#define CM_TECDIV 0x0cc
+#define CM_TD0CTL 0x0d0
+#define CM_TD0DIV 0x0d4
+#define CM_TD1CTL 0x0d8
+#define CM_TD1DIV 0x0dc
#define CM_TSENSCTL 0x0e0
#define CM_TSENSDIV 0x0e4
#define CM_TIMERCTL 0x0e8
@@ -311,21 +324,18 @@ void __init bcm2835_init_clocks(void)
struct clk *clk;
int ret;
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
- 126000000);
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, 0, 126000000);
if (IS_ERR(clk))
pr_err("apb_pclk not registered\n");
- clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
- 3000000);
+ clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, 0, 3000000);
if (IS_ERR(clk))
pr_err("uart0_pclk not registered\n");
ret = clk_register_clkdev(clk, NULL, "20201000.uart");
if (ret)
pr_err("uart0_pclk alias not registered\n");
- clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
- 125000000);
+ clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, 0, 125000000);
if (IS_ERR(clk))
pr_err("uart1_pclk not registered\n");
ret = clk_register_clkdev(clk, NULL, "20215000.uart");
@@ -1060,16 +1070,7 @@ static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
- struct bcm2835_cprman *cprman = divider->cprman;
- const struct bcm2835_pll_divider_data *data = divider->data;
- u32 div = cprman_read(cprman, data->a2w_reg);
-
- div &= (1 << A2W_PLL_DIV_BITS) - 1;
- if (div == 0)
- div = 256;
-
- return parent_rate / div;
+ return clk_divider_ops.recalc_rate(hw, parent_rate);
}
static void bcm2835_pll_divider_off(struct clk_hw *hw)
@@ -1107,13 +1108,15 @@ static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
struct bcm2835_cprman *cprman = divider->cprman;
const struct bcm2835_pll_divider_data *data = divider->data;
- u32 cm;
- int ret;
+ u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS;
- ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
- if (ret)
- return ret;
+ div = DIV_ROUND_UP_ULL(parent_rate, rate);
+
+ div = min(div, max_div);
+ if (div == max_div)
+ div = 0;
+ cprman_write(cprman, data->a2w_reg, div);
cm = cprman_read(cprman, data->cm_reg);
cprman_write(cprman, data->cm_reg, cm | data->load_mask);
cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
@@ -1428,7 +1431,7 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
divider->div.reg = cprman->regs + data->a2w_reg;
divider->div.shift = A2W_PLL_DIV_SHIFT;
divider->div.width = A2W_PLL_DIV_BITS;
- divider->div.flags = 0;
+ divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO;
divider->div.lock = &cprman->regs_lock;
divider->div.hw.init = &init;
divider->div.table = NULL;
diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c
index 3a228b6d4fee..464fdc4bc66b 100644
--- a/drivers/clk/bcm/clk-cygnus.c
+++ b/drivers/clk/bcm/clk-cygnus.c
@@ -268,3 +268,62 @@ static void __init cygnus_asiu_init(struct device_node *node)
iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
}
CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
+
+/*
+ * AUDIO PLL VCO frequency parameter table
+ *
+ * PLL output frequency = ((ndiv_int + ndiv_frac / 2^20) *
+ * (parent clock rate / pdiv)
+ *
+ * On Cygnus, parent is the 25MHz oscillator
+ */
+static const struct iproc_pll_vco_param audiopll_vco_params[] = {
+ /* rate (Hz) ndiv_int ndiv_frac pdiv */
+ { 1354750204UL, 54, 199238, 1 },
+ { 1769470191UL, 70, 816639, 1 },
+};
+
+static const struct iproc_pll_ctrl audiopll = {
+ .flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW,
+ .reset = RESET_VAL(0x5c, 0, 1),
+ .dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 0),
+ .ndiv_int = REG_VAL(0x8, 0, 10),
+ .ndiv_frac = REG_VAL(0x8, 10, 20),
+ .pdiv = REG_VAL(0x44, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10),
+ .status = REG_VAL(0x54, 0, 1),
+ .macro_mode = REG_VAL(0x0, 0, 3),
+};
+
+static const struct iproc_clk_ctrl audiopll_clk[] = {
+ [BCM_CYGNUS_AUDIOPLL_CH0] = {
+ .channel = BCM_CYGNUS_AUDIOPLL_CH0,
+ .flags = IPROC_CLK_AON |
+ IPROC_CLK_MCLK_DIV_BY_2,
+ .enable = ENABLE_VAL(0x14, 8, 10, 9),
+ .mdiv = REG_VAL(0x14, 0, 8),
+ },
+ [BCM_CYGNUS_AUDIOPLL_CH1] = {
+ .channel = BCM_CYGNUS_AUDIOPLL_CH1,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x18, 8, 10, 9),
+ .mdiv = REG_VAL(0x18, 0, 8),
+ },
+ [BCM_CYGNUS_AUDIOPLL_CH2] = {
+ .channel = BCM_CYGNUS_AUDIOPLL_CH2,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x1c, 8, 10, 9),
+ .mdiv = REG_VAL(0x1c, 0, 8),
+ },
+};
+
+static void __init cygnus_audiopll_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &audiopll, audiopll_vco_params,
+ ARRAY_SIZE(audiopll_vco_params), audiopll_clk,
+ ARRAY_SIZE(audiopll_clk));
+}
+CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
+ cygnus_audiopll_clk_init);
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
index afd5891ac9e6..fd492a5dad12 100644
--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -25,6 +25,12 @@
#define PLL_VCO_HIGH_SHIFT 19
#define PLL_VCO_LOW_SHIFT 30
+/*
+ * PLL MACRO_SELECT modes 0 to 5 choose pre-calculated PLL output frequencies
+ * from a look-up table. Mode 7 allows user to manipulate PLL clock dividers
+ */
+#define PLL_USER_MODE 7
+
/* number of delay loops waiting for PLL to lock */
#define LOCK_DELAY 100
@@ -215,7 +221,10 @@ static void __pll_put_in_reset(struct iproc_pll *pll)
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
val = readl(pll->control_base + reset->offset);
- val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
+ if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW)
+ val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift);
+ else
+ val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift));
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
@@ -236,7 +245,10 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
val = readl(pll->control_base + reset->offset);
- val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
+ if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW)
+ val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift));
+ else
+ val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift);
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
@@ -292,6 +304,16 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
/* put PLL in reset */
__pll_put_in_reset(pll);
+ /* set PLL in user mode before modifying PLL controls */
+ if (ctrl->flags & IPROC_CLK_PLL_USER_MODE_ON) {
+ val = readl(pll->control_base + ctrl->macro_mode.offset);
+ val &= ~(bit_mask(ctrl->macro_mode.width) <<
+ ctrl->macro_mode.shift);
+ val |= PLL_USER_MODE << ctrl->macro_mode.shift;
+ iproc_pll_write(pll, pll->control_base,
+ ctrl->macro_mode.offset, val);
+ }
+
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
@@ -505,7 +527,10 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
if (mdiv == 0)
mdiv = 256;
- clk->rate = parent_rate / mdiv;
+ if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+ clk->rate = parent_rate / (mdiv * 2);
+ else
+ clk->rate = parent_rate / mdiv;
return clk->rate;
}
@@ -543,7 +568,10 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
if (rate == 0 || parent_rate == 0)
return -EINVAL;
- div = DIV_ROUND_UP(parent_rate, rate);
+ if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+ div = DIV_ROUND_UP(parent_rate, rate * 2);
+ else
+ div = DIV_ROUND_UP(parent_rate, rate);
if (div > 256)
return -EINVAL;
@@ -555,7 +583,10 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
val |= div << ctrl->mdiv.shift;
}
iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
- clk->rate = parent_rate / div;
+ if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+ clk->rate = parent_rate / (div * 2);
+ else
+ clk->rate = parent_rate / div;
return 0;
}
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
index 8988de70a98c..2148b4ea9f28 100644
--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -61,6 +61,26 @@
#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
/*
+ * Some PLLs have an additional divide by 2 in master clock calculation;
+ * MCLK = VCO_freq / (Mdiv * 2). Identify this to let the driver know
+ * of modified calculations
+ */
+#define IPROC_CLK_MCLK_DIV_BY_2 BIT(7)
+
+/*
+ * Some PLLs provide a look up table for the leaf clock frequencies and
+ * auto calculates VCO frequency parameters based on the provided leaf
+ * clock frequencies. They have a user mode that allows the divider
+ * controls to be determined by the user
+ */
+#define IPROC_CLK_PLL_USER_MODE_ON BIT(8)
+
+/*
+ * Some PLLs have an active low reset
+ */
+#define IPROC_CLK_PLL_RESET_ACTIVE_LOW BIT(9)
+
+/*
* Parameters for VCO frequency configuration
*
* VCO frequency =
@@ -149,6 +169,7 @@ struct iproc_pll_ctrl {
struct iproc_clk_reg_op pdiv;
struct iproc_pll_vco_ctrl vco_ctrl;
struct iproc_clk_reg_op status;
+ struct iproc_clk_reg_op macro_mode;
};
/*
@@ -183,16 +204,16 @@ struct iproc_asiu_div {
unsigned int low_width;
};
-void __init iproc_armpll_setup(struct device_node *node);
-void __init iproc_pll_clk_setup(struct device_node *node,
- const struct iproc_pll_ctrl *pll_ctrl,
- const struct iproc_pll_vco_param *vco,
- unsigned int num_vco_entries,
- const struct iproc_clk_ctrl *clk_ctrl,
- unsigned int num_clks);
-void __init iproc_asiu_setup(struct device_node *node,
- const struct iproc_asiu_div *div,
- const struct iproc_asiu_gate *gate,
- unsigned int num_clks);
+void iproc_armpll_setup(struct device_node *node);
+void iproc_pll_clk_setup(struct device_node *node,
+ const struct iproc_pll_ctrl *pll_ctrl,
+ const struct iproc_pll_vco_param *vco,
+ unsigned int num_vco_entries,
+ const struct iproc_clk_ctrl *clk_ctrl,
+ unsigned int num_clks);
+void iproc_asiu_setup(struct device_node *node,
+ const struct iproc_asiu_div *div,
+ const struct iproc_asiu_gate *gate,
+ unsigned int num_clks);
#endif /* _CLK_IPROC_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 17:30:07 +0000