diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 244 |
2 files changed, 246 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9159fa2cea90..65213b526518 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -336,7 +336,8 @@ dtb-$(CONFIG_MACH_MESON8) += \ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ - mmp2-brownstone.dtb + mmp2-brownstone.dtb \ + mmp2-olpc-xo-1-75.dtb dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an385.dtb \ mps2-an399.dtb diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts new file mode 100644 index 000000000000..6cfa0d4a1884 --- /dev/null +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * OLPC XO 1.75 Laptop. + * + * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +/dts-v1/; +#include "mmp2.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "OLPC XO-1.75"; + compatible = "olpc,xo-1.75", "mrvl,mmp2"; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@1fc00000 { + compatible = "simple-framebuffer"; + reg = <0x1fc00000 (1200 * 900 * 2)>; + width = <1200>; + height = <900>; + stride = <(1200 * 2)>; + format = "r5g6b5"; + clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>, + <&soc_clocks MMP2_CLK_DISP0>; + }; + }; + + memory { + linux,usable-memory = <0x0 0x1f800000>; + available = <0xcf000 0x1ef31000 0x1000 0xbf000>; + reg = <0x0 0x20000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio 129 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + }; + + tablet_mode { + label = "E-Book Mode"; + gpios = <&gpio 128 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + + microphone_insert { + label = "Microphone Plug"; + gpios = <&gpio 96 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_MICROPHONE_INSERT>; + debounce-interval = <100>; + wakeup-source; + }; + + headphone_insert { + label = "Headphone Plug"; + gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_HEADPHONE_INSERT>; + debounce-interval = <100>; + wakeup-source; + }; + }; + + camera_i2c { + compatible = "i2c-gpio"; + gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>, + <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + i2c-gpio,timeout-ms = <1000>; + status = "okay"; + + camera@21 { + compatible = "ovti,ov7670"; + reg = <0x21>; + reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>; + clocks = <&camera0>; + clock-names = "xclk"; + + port { + ov7670_0: endpoint { + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&camera0_0>; + }; + }; + }; + }; + + battery { + compatible = "olpc,xo1.5-battery", "olpc,xo1-battery"; + }; + + wlan_reg: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "wlan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 34 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wlan_pwrseq: pwrseq0 { + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + }; + + soc { + axi@d4200000 { + ap-sp@d4290000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "olpc,ap-sp"; + interrupts = <40>; + reg = <0xd4290000 0x1000>; + data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + }; + }; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_otg0 { + status = "okay"; +}; + +&mmc1 { + clock-frequency = <50000000>; + no-1-8-v; + mrvl,clk-delay-cycles = <31>; + broken-cd; + status = "okay"; +}; + +&mmc2 { + clock-frequency = <50000000>; + no-1-8-v; + bus-width = <4>; + non-removable; + broken-cd; + wakeup-source; + keep-power-in-suspend; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&wlan_reg>; + status = "okay"; +}; + +&mmc3 { + clock-frequency = <50000000>; + no-1-8-v; + bus-width = <8>; + non-removable; + broken-cd; + mrvl,clk-delay-cycles = <31>; + status = "okay"; +}; + +&twsi1 { + status = "okay"; + + audio-codec@1a { + compatible = "realtek,alc5631"; + reg = <0x1a>; + status = "okay"; + }; +}; + +&twsi2 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + status = "okay"; + }; +}; + +&twsi6 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x1d>; + status = "okay"; + }; +}; + +&ssp3 { + #address-cells = <0>; + spi-slave; + status = "okay"; + ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; + + slave { + compatible = "olpc,xo1.75-ec"; + spi-cpha; + cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>; + }; +}; + +&camera0 { + status = "okay"; + + port { + camera0_0: endpoint { + remote-endpoint = <&ov7670_0>; + }; + }; +}; |