diff options
Diffstat (limited to 'arch')
46 files changed, 707 insertions, 210 deletions
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h index 89f195656be7..7085bd51668b 100644 --- a/arch/m68k/include/asm/cacheflush_no.h +++ b/arch/m68k/include/asm/cacheflush_no.h @@ -29,7 +29,7 @@ static inline void __flush_cache_all(void) { -#ifdef CONFIG_M5407 +#if defined(CONFIG_M5407) || defined(CONFIG_M548x) /* * Use cpushl to push and invalidate all cache lines. * Gas doesn't seem to know how to generate the ColdFire diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h index 83a9fa4e618a..3b0a34d0fe33 100644 --- a/arch/m68k/include/asm/coldfire.h +++ b/arch/m68k/include/asm/coldfire.h @@ -32,7 +32,9 @@ */ #define MCF_MBAR 0x10000000 #define MCF_MBAR2 0x80000000 -#if defined(CONFIG_M520x) +#if defined(CONFIG_M548x) +#define MCF_IPSBAR MCF_MBAR +#elif defined(CONFIG_M520x) #define MCF_IPSBAR 0xFC000000 #else #define MCF_IPSBAR 0x40000000 diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index 283214dc65a7..1b57adbafad5 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -36,7 +36,8 @@ */ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ - defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M548x) /* These parts have GPIO organized by 8 bit ports */ @@ -136,6 +137,8 @@ static inline u32 __mcf_gpio_ppdr(unsigned gpio) #endif else return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; #endif } @@ -173,6 +176,8 @@ static inline u32 __mcf_gpio_podr(unsigned gpio) #endif else return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; #endif } diff --git a/arch/m68k/include/asm/m548xgpt.h b/arch/m68k/include/asm/m548xgpt.h new file mode 100644 index 000000000000..c8ef158a1c4e --- /dev/null +++ b/arch/m68k/include/asm/m548xgpt.h @@ -0,0 +1,88 @@ +/* + * File: m548xgpt.h + * Purpose: Register and bit definitions for the MCF548X + * + * Notes: + * + */ + +#ifndef m548xgpt_h +#define m548xgpt_h + +/********************************************************************* +* +* General Purpose Timers (GPT) +* +*********************************************************************/ + +/* Register read/write macros */ +#define MCF_GPT_GMS0 0x000800 +#define MCF_GPT_GCIR0 0x000804 +#define MCF_GPT_GPWM0 0x000808 +#define MCF_GPT_GSR0 0x00080C +#define MCF_GPT_GMS1 0x000810 +#define MCF_GPT_GCIR1 0x000814 +#define MCF_GPT_GPWM1 0x000818 +#define MCF_GPT_GSR1 0x00081C +#define MCF_GPT_GMS2 0x000820 +#define MCF_GPT_GCIR2 0x000824 +#define MCF_GPT_GPWM2 0x000828 +#define MCF_GPT_GSR2 0x00082C +#define MCF_GPT_GMS3 0x000830 +#define MCF_GPT_GCIR3 0x000834 +#define MCF_GPT_GPWM3 0x000838 +#define MCF_GPT_GSR3 0x00083C +#define MCF_GPT_GMS(x) (0x000800+((x)*0x010)) +#define MCF_GPT_GCIR(x) (0x000804+((x)*0x010)) +#define MCF_GPT_GPWM(x) (0x000808+((x)*0x010)) +#define MCF_GPT_GSR(x) (0x00080C+((x)*0x010)) + +/* Bit definitions and macros for MCF_GPT_GMS */ +#define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0) +#define MCF_GPT_GMS_GPIO(x) (((x)&0x00000003)<<4) +#define MCF_GPT_GMS_IEN (0x00000100) +#define MCF_GPT_GMS_OD (0x00000200) +#define MCF_GPT_GMS_SC (0x00000400) +#define MCF_GPT_GMS_CE (0x00001000) +#define MCF_GPT_GMS_WDEN (0x00008000) +#define MCF_GPT_GMS_ICT(x) (((x)&0x00000003)<<16) +#define MCF_GPT_GMS_OCT(x) (((x)&0x00000003)<<20) +#define MCF_GPT_GMS_OCPW(x) (((x)&0x000000FF)<<24) +#define MCF_GPT_GMS_OCT_FRCLOW (0x00000000) +#define MCF_GPT_GMS_OCT_PULSEHI (0x00100000) +#define MCF_GPT_GMS_OCT_PULSELO (0x00200000) +#define MCF_GPT_GMS_OCT_TOGGLE (0x00300000) +#define MCF_GPT_GMS_ICT_ANY (0x00000000) +#define MCF_GPT_GMS_ICT_RISE (0x00010000) +#define MCF_GPT_GMS_ICT_FALL (0x00020000) +#define MCF_GPT_GMS_ICT_PULSE (0x00030000) +#define MCF_GPT_GMS_GPIO_INPUT (0x00000000) +#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020) +#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030) +#define MCF_GPT_GMS_TMS_DISABLE (0x00000000) +#define MCF_GPT_GMS_TMS_INCAPT (0x00000001) +#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002) +#define MCF_GPT_GMS_TMS_PWM (0x00000003) +#define MCF_GPT_GMS_TMS_GPIO (0x00000004) + +/* Bit definitions and macros for MCF_GPT_GCIR */ +#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0) +#define MCF_GPT_GCIR_PRE(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for MCF_GPT_GPWM */ +#define MCF_GPT_GPWM_LOAD (0x00000001) +#define MCF_GPT_GPWM_PWMOP (0x00000100) +#define MCF_GPT_GPWM_WIDTH(x) (((x)&0x0000FFFF)<<16) + +/* Bit definitions and macros for MCF_GPT_GSR */ +#define MCF_GPT_GSR_CAPT (0x00000001) +#define MCF_GPT_GSR_COMP (0x00000002) +#define MCF_GPT_GSR_PWMP (0x00000004) +#define MCF_GPT_GSR_TEXP (0x00000008) +#define MCF_GPT_GSR_PIN (0x00000100) +#define MCF_GPT_GSR_OVF(x) (((x)&0x00000007)<<12) +#define MCF_GPT_GSR_CAPTURE(x) (((x)&0x0000FFFF)<<16) + +/********************************************************************/ + +#endif /* m548xgpt_h */ diff --git a/arch/m68k/include/asm/m548xsim.h b/arch/m68k/include/asm/m548xsim.h new file mode 100644 index 000000000000..149135ef30d2 --- /dev/null +++ b/arch/m68k/include/asm/m548xsim.h @@ -0,0 +1,55 @@ +/* + * m548xsim.h -- ColdFire 547x/548x System Integration Unit support. + */ + +#ifndef m548xsim_h +#define m548xsim_h + +#define MCFINT_VECBASE 64 + +/* + * Interrupt Controller Registers + */ +#define MCFICM_INTC0 0x0700 /* Base for Interrupt Ctrl 0 */ +#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ +#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ +#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ +#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ +#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ +#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_IRLR 0x18 /* */ +#define MCFINTC_IACKL 0x19 /* */ +#define MCFINTC_ICR0 0x40 /* Base ICR register */ + +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ +#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */ + +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */ +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 + +/* + * Some PSC related definitions + */ +#define MCF_PAR_PSC(x) (0x000A4F-((x)&0x3)) +#define MCF_PAR_SDA (0x0008) +#define MCF_PAR_SCL (0x0004) +#define MCF_PAR_PSC_TXD (0x04) +#define MCF_PAR_PSC_RXD (0x08) +#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4) +#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6) +#define MCF_PAR_PSC_CTS_GPIO (0x00) +#define MCF_PAR_PSC_CTS_BCLK (0x80) +#define MCF_PAR_PSC_CTS_CTS (0xC0) +#define MCF_PAR_PSC_RTS_GPIO (0x00) +#define MCF_PAR_PSC_RTS_FSYNC (0x20) +#define MCF_PAR_PSC_RTS_RTS (0x30) +#define MCF_PAR_PSC_CANRX (0x40) + +#endif /* m548xsim_h */ diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h index c042634fadaa..f49dfc09f70a 100644 --- a/arch/m68k/include/asm/mcfcache.h +++ b/arch/m68k/include/asm/mcfcache.h @@ -107,7 +107,7 @@ .endm #endif /* CONFIG_M532x */ -#if defined(CONFIG_M5407) +#if defined(CONFIG_M5407) || defined(CONFIG_M548x) /* * Version 4 cores have a true harvard style separate instruction * and data cache. Invalidate and enable cache, also enable write diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h index 9c70a67bf85f..6901fd68165b 100644 --- a/arch/m68k/include/asm/mcfsim.h +++ b/arch/m68k/include/asm/mcfsim.h @@ -41,6 +41,8 @@ #elif defined(CONFIG_M5407) #include <asm/m5407sim.h> #include <asm/mcfintc.h> +#elif defined(CONFIG_M548x) +#include <asm/m548xsim.h> #endif /****************************************************************************/ diff --git a/arch/m68k/include/asm/mcfslt.h b/arch/m68k/include/asm/mcfslt.h new file mode 100644 index 000000000000..d0d0ecba5333 --- /dev/null +++ b/arch/m68k/include/asm/mcfslt.h @@ -0,0 +1,44 @@ +/****************************************************************************/ + +/* + * mcfslt.h -- ColdFire internal Slice (SLT) timer support defines. + * + * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2009, Philippe De Muyter (phdm@macqel.be) + */ + +/****************************************************************************/ +#ifndef mcfslt_h +#define mcfslt_h +/****************************************************************************/ + +/* + * Get address specific defines for the 547x. + */ +#define MCFSLT_TIMER0 0x900 /* Base address of TIMER0 */ +#define MCFSLT_TIMER1 0x910 /* Base address of TIMER1 */ + + +/* + * Define the SLT timer register set addresses. + */ +#define MCFSLT_STCNT 0x00 /* Terminal count */ +#define MCFSLT_SCR 0x04 /* Control */ +#define MCFSLT_SCNT 0x08 /* Current count */ +#define MCFSLT_SSR 0x0C /* Status */ + +/* + * Bit definitions for the SCR control register. + */ +#define MCFSLT_SCR_RUN 0x04000000 /* Run mode (continuous) */ +#define MCFSLT_SCR_IEN 0x02000000 /* Interrupt enable */ +#define MCFSLT_SCR_TEN 0x01000000 /* Timer enable */ + +/* + * Bit definitions for the SSR status register. + */ +#define MCFSLT_SSR_BE 0x02000000 /* Bus error condition */ +#define MCFSLT_SSR_TE 0x01000000 /* Timeout condition */ + +/****************************************************************************/ +#endif /* mcfslt_h */ diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h index 01a8716c5fc5..db72e2b889ca 100644 --- a/arch/m68k/include/asm/mcfuart.h +++ b/arch/m68k/include/asm/mcfuart.h @@ -47,6 +47,11 @@ #define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ #define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ #define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ +#elif defined(CONFIG_M548x) +#define MCFUART_BASE1 0x8600 /* on M548x */ +#define MCFUART_BASE2 0x8700 /* on M548x */ +#define MCFUART_BASE3 0x8800 /* on M548x */ +#define MCFUART_BASE4 0x8900 /* on M548x */ #endif @@ -212,7 +217,9 @@ struct mcf_platform_uart { #define MCFUART_URF_RXS 0xc0 /* Receiver status */ #endif -#if defined(CONFIG_M5272) +#if defined(CONFIG_M548x) +#define MCFUART_TXFIFOSIZE 512 +#elif defined(CONFIG_M5272) #define MCFUART_TXFIFOSIZE 25 #else #define MCFUART_TXFIFOSIZE 1 diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index 73e5e581245b..78e59b82ebc3 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -22,13 +22,9 @@ int main(void) { /* offsets into the task struct */ - DEFINE(TASK_STATE, offsetof(struct task_struct, state)); - DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); - DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); DEFINE(TASK_MM, offsetof(struct task_struct, mm)); - DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); #ifdef CONFIG_MMU DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info)); #endif @@ -64,14 +60,6 @@ int main(void) /* bitfields are a bit difficult */ DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); - /* offsets into the irq_handler struct */ - DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler)); - DEFINE(IRQ_DEVID, offsetof(struct irq_node, dev_id)); - DEFINE(IRQ_NEXT, offsetof(struct irq_node, next)); - - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* offsets into the irq_cpustat_t struct */ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 2609c394e1df..9287150e5fb0 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -59,6 +59,10 @@ config GENERIC_HARDIRQS bool default y +config GENERIC_HARDIRQS_NO__DO_IRQ + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -171,6 +175,11 @@ config M5407 help Motorola ColdFire 5407 processor support. +config M548x + bool "MCF548x" + help + Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. + endchoice config M527x @@ -181,7 +190,7 @@ config M527x config COLDFIRE bool - depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407) + depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M548x) select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB default y diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index 14042574ac21..026ef16fa68e 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -25,6 +25,7 @@ platform-$(CONFIG_M528x) := 528x platform-$(CONFIG_M5307) := 5307 platform-$(CONFIG_M532x) := 532x platform-$(CONFIG_M5407) := 5407 +platform-$(CONFIG_M548x) := 548x PLATFORM := $(platform-y) board-$(CONFIG_PILOT) := pilot @@ -73,6 +74,7 @@ cpuclass-$(CONFIG_M528x) := coldfire cpuclass-$(CONFIG_M5307) := coldfire cpuclass-$(CONFIG_M532x) := coldfire cpuclass-$(CONFIG_M5407) := coldfire +cpuclass-$(CONFIG_M548x) := coldfire cpuclass-$(CONFIG_M68328) := 68328 cpuclass-$(CONFIG_M68EZ328) := 68328 cpuclass-$(CONFIG_M68VZ328) := 68328 @@ -100,6 +102,7 @@ cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307) cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200) cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) cflags-$(CONFIG_M5407) := $(call cc-option,-m5407,-m5200) +cflags-$(CONFIG_M548x) := $(call cc-option,-m5407,-m5200) cflags-$(CONFIG_M68328) := -m68000 cflags-$(CONFIG_M68EZ328) := -m68000 cflags-$(CONFIG_M68VZ328) := -m68000 diff --git a/arch/m68knommu/kernel/.gitignore b/arch/m68knommu/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/m68knommu/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index 24335022fa2c..ffe02f41ad46 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -21,14 +21,8 @@ int main(void) { /* offsets into the task struct */ - DEFINE(TASK_STATE, offsetof(struct task_struct, state)); - DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); - DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); - DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked)); DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); - DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack)); DEFINE(TASK_MM, offsetof(struct task_struct, mm)); - DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); /* offsets into the irq_cpustat_t struct */ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); @@ -63,7 +57,7 @@ int main(void) DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2); #else /* bitfields are a bit difficult */ - DEFINE(PT_OFF_VECTOR, offsetof(struct pt_regs, pc) + 4); + DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); #endif /* signal defines */ @@ -75,11 +69,8 @@ int main(void) DEFINE(PT_PTRACED, PT_PTRACED); /* Offsets in thread_info structure */ - DEFINE(TI_TASK, offsetof(struct thread_info, task)); - DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); return 0; } diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c index f6be1248d216..6fe7c38cd556 100644 --- a/arch/m68knommu/kernel/ptrace.c +++ b/arch/m68knommu/kernel/ptrace.c @@ -18,6 +18,7 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/tracehook.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -134,14 +135,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) tmp >>= 16; } else if (addr >= 21 && addr < 49) { tmp = child->thread.fp[addr - 21]; -#ifdef CONFIG_M68KFPU_EMU - /* Convert internal fpu reg representation - * into long double format - */ - if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) - tmp = ((tmp & 0xffff0000) << 15) | - ((tmp & 0x0000ffff) << 16); -#endif } else if (addr == 49) { tmp = child->mm->start_code; } else if (addr == 50) { @@ -175,16 +168,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } if (addr >= 21 && addr < 48) { -#ifdef CONFIG_M68KFPU_EMU - /* Convert long double format - * into internal fpu reg representation - */ - if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) { - data = (unsigned long)data << 15; - data = (data & 0xffff0000) | - ((data & 0x0000ffff) >> 1); - } -#endif child->thread.fp[addr - 21] = data; ret = 0; } @@ -259,21 +242,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void syscall_trace(void) +asmlinkage int syscall_trace_enter(void) { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + int ret = 0; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + ret = tracehook_report_syscall_entry(task_pt_regs(current)); + return ret; +} + +asmlinkage void syscall_trace_leave(void) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(task_pt_regs(current), 0); } diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index ba92b90d5fbc..c684adf5dc40 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -54,9 +54,6 @@ void (*mach_reset)(void); void (*mach_halt)(void); void (*mach_power_off)(void); -#ifdef CONFIG_M68000 - #define CPU "MC68000" -#endif #ifdef CONFIG_M68328 #define CPU "MC68328" #endif diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 7089dd9d843b..d6ac2a43453c 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -60,13 +60,16 @@ static unsigned long read_rtc_mmss(void) { unsigned int year, mon, day, hour, min, sec; - if (mach_gettod) + if (mach_gettod) { mach_gettod(&year, &mon, &day, &hour, &min, &sec); - else - year = mon = day = hour = min = sec = 0; + if ((year += 1900) < 1970) + year += 100; + } else { + year = 1970; + mon = day = 1; + hour = min = sec = 0; + } - if ((year += 1900) < 1970) - year += 100; return mktime(year, mon, day, hour, min, sec); } diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index 3739c8f657d7..a768008dfd06 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -179,14 +179,16 @@ static void __show_stack(struct task_struct *task, unsigned long *stack) void bad_super_trap(struct frame *fp) { + int vector = (fp->ptregs.vector >> 2) & 0xff; + console_verbose(); - if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names)) + if (vector < ARRAY_SIZE(vec_names)) printk (KERN_WARNING "*** %s *** FORMAT=%X\n", - vec_names[(fp->ptregs.vector) >> 2], + vec_names[vector], fp->ptregs.format); else printk (KERN_WARNING "*** Exception %d *** FORMAT=%X\n", - (fp->ptregs.vector) >> 2, + vector, fp->ptregs.format); printk (KERN_WARNING "Current process id is %d\n", current->pid); die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); @@ -195,10 +197,11 @@ void bad_super_trap(struct frame *fp) asmlinkage void trap_c(struct frame *fp) { int sig; + int vector = (fp->ptregs.vector >> 2) & 0xff; siginfo_t info; if (fp->ptregs.sr & PS_S) { - if ((fp->ptregs.vector >> 2) == VEC_TRACE) { + if (vector == VEC_TRACE) { /* traced a trapping instruction */ } else bad_super_trap(fp); @@ -206,7 +209,7 @@ asmlinkage void trap_c(struct frame *fp) } /* send the appropriate signal to the user program */ - switch ((fp->ptregs.vector) >> 2) { + switch (vector) { case VEC_ADDRERR: info.si_code = BUS_ADRALN; sig = SIGBUS; @@ -360,16 +363,3 @@ void show_stack(struct task_struct *task, unsigned long *stack) else __show_stack(task, stack); } - -#ifdef CONFIG_M68KFPU_EMU -asmlinkage void fpemu_signal(int signal, int code, void *addr) -{ - siginfo_t info; - - info.si_signo = signal; - info.si_errno = 0; - info.si_code = code; - info.si_addr = addr; - force_sig_info(signal, &info, current); -} -#endif diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile index 113c33390064..b5db05625cfa 100644 --- a/arch/m68knommu/platform/5206/Makefile +++ b/arch/m68knommu/platform/5206/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile index 113c33390064..b5db05625cfa 100644 --- a/arch/m68knommu/platform/5206e/Makefile +++ b/arch/m68knommu/platform/5206e/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile index 435ab3483dc1..ad3f4e5a57ce 100644 --- a/arch/m68knommu/platform/520x/Makefile +++ b/arch/m68knommu/platform/520x/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile index b8f9b45440c2..c04b8f71c88c 100644 --- a/arch/m68knommu/platform/523x/Makefile +++ b/arch/m68knommu/platform/523x/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile index f56225d1582f..4bed30fd0073 100644 --- a/arch/m68knommu/platform/5249/Makefile +++ b/arch/m68knommu/platform/5249/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile index 93673ef8e2c1..34110fc14301 100644 --- a/arch/m68knommu/platform/5272/Makefile +++ b/arch/m68knommu/platform/5272/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index 59278c0887d0..65bb582734e1 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -13,6 +13,8 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> @@ -148,9 +150,23 @@ void __init config_BSP(char *commandp, int size) /***************************************************************************/ +/* + * Some 5272 based boards have the FEC ethernet diectly connected to + * an ethernet switch. In this case we need to use the fixed phy type, + * and we need to declare it early in boot. + */ +static struct fixed_phy_status nettel_fixed_phy_status __initdata = { + .link = 1, + .speed = 100, + .duplex = 0, +}; + +/***************************************************************************/ + static int __init init_BSP(void) { m5272_uarts_init(); + fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status); platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices)); return 0; } diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c index 7081e0a9720e..3cf681c177aa 100644 --- a/arch/m68knommu/platform/5272/intc.c +++ b/arch/m68knommu/platform/5272/intc.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/kernel_stat.h> #include <linux/irq.h> #include <linux/io.h> #include <asm/coldfire.h> @@ -29,6 +30,10 @@ * via a set of 4 "Interrupt Controller Registers" (ICR). There is a * loose mapping of vector number to register and internal bits, but * a table is the easiest and quickest way to map them. + * + * Note that the external interrupts are edge triggered (unlike the + * internal interrupt sources which are level triggered). Which means + * they also need acknowledgeing via acknowledge bits. */ struct irqmap { unsigned char icr; @@ -68,6 +73,11 @@ static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = { /*MCF_IRQ_SWTO*/ { .icr = MCFSIM_ICR4, .index = 16, .ack = 0, }, }; +/* + * The act of masking the interrupt also has a side effect of 'ack'ing + * an interrupt on this irq (for the external irqs). So this mask function + * is also an ack_mask function. + */ static void intc_irq_mask(unsigned int irq) { if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) { @@ -95,7 +105,9 @@ static void intc_irq_ack(unsigned int irq) irq -= MCFINT_VECBASE; if (intc_irqmap[irq].ack) { u32 v; - v = 0xd << intc_irqmap[irq].index; + v = readl(MCF_MBAR + intc_irqmap[irq].icr); + v &= (0x7 << intc_irqmap[irq].index); + v |= (0x8 << intc_irqmap[irq].index); writel(v, MCF_MBAR + intc_irqmap[irq].icr); } } @@ -103,21 +115,47 @@ static void intc_irq_ack(unsigned int irq) static int intc_irq_set_type(unsigned int irq, unsigned int type) { - /* We can set the edge type here for external interrupts */ + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) { + irq -= MCFINT_VECBASE; + if (intc_irqmap[irq].ack) { + u32 v; + v = readl(MCF_MBAR + MCFSIM_PITR); + if (type == IRQ_TYPE_EDGE_FALLING) + v &= ~(0x1 << (32 - irq)); + else + v |= (0x1 << (32 - irq)); + writel(v, MCF_MBAR + MCFSIM_PITR); + } + } return 0; } +/* + * Simple flow handler to deal with the external edge triggered interrupts. + * We need to be careful with the masking/acking due to the side effects + * of masking an interrupt. + */ +static void intc_external_irq(unsigned int irq, struct irq_desc *desc) +{ + kstat_incr_irqs_this_cpu(irq, desc); + desc->status |= IRQ_INPROGRESS; + desc->chip->ack(irq); + handle_IRQ_event(irq, desc->action); + desc->status &= ~IRQ_INPROGRESS; +} + static struct irq_chip intc_irq_chip = { .name = "CF-INTC", .mask = intc_irq_mask, .unmask = intc_irq_unmask, + .mask_ack = intc_irq_mask, .ack = intc_irq_ack, .set_type = intc_irq_set_type, }; void __init init_IRQ(void) { - int irq; + int irq, edge; init_vectors(); @@ -128,11 +166,17 @@ void __init init_IRQ(void) writel(0x88888888, MCF_MBAR + MCFSIM_ICR4); for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; - intc_irq_set_type(irq, 0); + set_irq_chip(irq, &intc_irq_chip); + edge = 0; + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) + edge = intc_irqmap[irq - MCFINT_VECBASE].ack; + if (edge) { + set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + set_irq_handler(irq, intc_external_irq); + } else { + set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + set_irq_handler(irq, handle_level_irq); + } } } diff --git a/arch/m68knommu/platform/527x/Makefile b/arch/m68knommu/platform/527x/Makefile index 3d90e6d92459..6ac4b57370ea 100644 --- a/arch/m68knommu/platform/527x/Makefile +++ b/arch/m68knommu/platform/527x/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile index 3d90e6d92459..6ac4b57370ea 100644 --- a/arch/m68knommu/platform/528x/Makefile +++ b/arch/m68knommu/platform/528x/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 6de526976828..d4293b791f2e 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/532x/Makefile b/arch/m68knommu/platform/532x/Makefile index 4cc23245bcd1..ce01669399c6 100644 --- a/arch/m68knommu/platform/532x/Makefile +++ b/arch/m68knommu/platform/532x/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/5407/Makefile b/arch/m68knommu/platform/5407/Makefile index dee62c5dbaa6..e83fe148eddc 100644 --- a/arch/m68knommu/platform/5407/Makefile +++ b/arch/m68knommu/platform/5407/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 diff --git a/arch/m68knommu/platform/548x/Makefile b/arch/m68knommu/platform/548x/Makefile new file mode 100644 index 000000000000..e6035e7a2d3f --- /dev/null +++ b/arch/m68knommu/platform/548x/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the m68knommu linux kernel. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 + +obj-y := config.o + diff --git a/arch/m68knommu/platform/548x/config.c b/arch/m68knommu/platform/548x/config.c new file mode 100644 index 000000000000..9888846bd1cf --- /dev/null +++ b/arch/m68knommu/platform/548x/config.c @@ -0,0 +1,115 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/548x/config.c + * + * Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be> + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/m548xsim.h> +#include <asm/mcfuart.h> +#include <asm/m548xgpt.h> + +/***************************************************************************/ + +static struct mcf_platform_uart m548x_uart_platform[] = { + { + .mapbase = MCF_MBAR + MCFUART_BASE1, + .irq = 64 + 35, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE2, + .irq = 64 + 34, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE3, + .irq = 64 + 33, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE4, + .irq = 64 + 32, + }, +}; + +static struct platform_device m548x_uart = { + .name = "mcfuart", + .id = 0, + .dev.platform_data = m548x_uart_platform, +}; + +static struct platform_device *m548x_devices[] __initdata = { + &m548x_uart, +}; + + +/***************************************************************************/ + +static void __init m548x_uart_init_line(int line, int irq) +{ + int rts_cts; + + /* enable io pins */ + switch (line) { + case 0: + rts_cts = 0; break; + case 1: + rts_cts = MCF_PAR_PSC_RTS_RTS; break; + case 2: + rts_cts = MCF_PAR_PSC_RTS_RTS | MCF_PAR_PSC_CTS_CTS; break; + case 3: + rts_cts = 0; break; + } + __raw_writeb(MCF_PAR_PSC_TXD | rts_cts | MCF_PAR_PSC_RXD, + MCF_MBAR + MCF_PAR_PSC(line)); +} + +static void __init m548x_uarts_init(void) +{ + const int nrlines = ARRAY_SIZE(m548x_uart_platform); + int line; + + for (line = 0; (line < nrlines); line++) + m548x_uart_init_line(line, m548x_uart_platform[line].irq); +} + +/***************************************************************************/ + +static void mcf548x_reset(void) +{ + /* disable interrupts and enable the watchdog */ + asm("movew #0x2700, %sr\n"); + __raw_writel(0, MCF_MBAR + MCF_GPT_GMS0); + __raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0); + __raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4), + MCF_MBAR + MCF_GPT_GMS0); +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ + mach_reset = mcf548x_reset; + m548x_uarts_init(); +} + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + + platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices)); + return 0; +} + +arch_initcall(init_BSP); + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S index 9d80d2c42866..27241e16a526 100644 --- a/arch/m68knommu/platform/68328/entry.S +++ b/arch/m68knommu/platform/68328/entry.S @@ -43,10 +43,10 @@ badsys: jra ret_from_exception do_trace: - movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/ + movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/ subql #4,%sp SAVE_SWITCH_STACK - jbsr syscall_trace + jbsr syscall_trace_enter RESTORE_SWITCH_STACK addql #4,%sp movel %sp@(PT_OFF_ORIG_D0),%d1 @@ -57,10 +57,10 @@ do_trace: lea sys_call_table, %a0 jbsr %a0@(%d1) -1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */ +1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */ subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK - jbsr syscall_trace + jbsr syscall_trace_leave ret_from_signal: RESTORE_SWITCH_STACK @@ -71,16 +71,16 @@ ENTRY(system_call) SAVE_ALL /* save top of frame*/ - pea %sp@ - jbsr set_esp0 - addql #4,%sp + pea %sp@ + jbsr set_esp0 + addql #4,%sp movel %sp@(PT_OFF_ORIG_D0),%d0 movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 movel %d1,%a2 - btst #TIF_SYSCALL_TRACE,%a2@(TI_FLAGS) + btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) jne do_trace cmpl #NR_syscalls,%d0 jcc badsys @@ -88,10 +88,10 @@ ENTRY(system_call) lea sys_call_table,%a0 movel %a0@(%d0), %a0 jbsr %a0@ - movel %d0,%sp@(PT_OFF_D0) /* save the return value*/ + movel %d0,%sp@(PT_OFF_D0) /* save the return value*/ ret_from_exception: - btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/ + btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/ jeq Luser_return /* if so, skip resched, signals*/ Lkernel_return: @@ -133,7 +133,7 @@ Lreturn: */ inthandler1: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -144,7 +144,7 @@ inthandler1: inthandler2: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -155,7 +155,7 @@ inthandler2: inthandler3: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -166,7 +166,7 @@ inthandler3: inthandler4: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -177,7 +177,7 @@ inthandler4: inthandler5: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -188,7 +188,7 @@ inthandler5: inthandler6: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -199,7 +199,7 @@ inthandler6: inthandler7: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- @@ -210,7 +210,7 @@ inthandler7: inthandler: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 movel %sp,%sp@- diff --git a/arch/m68knommu/platform/68328/head-de2.S b/arch/m68knommu/platform/68328/head-de2.S index 92d96456d363..f632fdcb93e9 100644 --- a/arch/m68knommu/platform/68328/head-de2.S +++ b/arch/m68knommu/platform/68328/head-de2.S @@ -1,11 +1,5 @@ -#if defined(CONFIG_RAM32MB) -#define MEM_END 0x02000000 /* Memory size 32Mb */ -#elif defined(CONFIG_RAM16MB) -#define MEM_END 0x01000000 /* Memory size 16Mb */ -#else #define MEM_END 0x00800000 /* Memory size 8Mb */ -#endif #undef CRT_DEBUG diff --git a/arch/m68knommu/platform/68328/head-ram.S b/arch/m68knommu/platform/68328/head-ram.S index 252b80b02038..7f1aeeacb219 100644 --- a/arch/m68knommu/platform/68328/head-ram.S +++ b/arch/m68knommu/platform/68328/head-ram.S @@ -67,33 +67,6 @@ pclp1: beq pclp1 #endif /* DEBUG */ -#ifdef CONFIG_RELOCATE - /* Copy me to RAM */ - moveal #__rom_start, %a0 - moveal #_stext, %a1 - moveal #_edata, %a2 - - /* Copy %a0 to %a1 until %a1 == %a2 */ -LD1: - movel %a0@+, %d0 - movel %d0, %a1@+ - cmpal %a1, %a2 - bhi LD1 - -#ifdef DEBUG - moveq #74, %d7 /* 'J' */ - moveb %d7,0xfffff907 /* No absolute addresses */ -pclp2: - movew 0xfffff906, %d7 - andw #0x2000, %d7 - beq pclp2 -#endif /* DEBUG */ - /* jump into the RAM copy */ - jmp ram_jump -ram_jump: - -#endif /* CONFIG_RELOCATE */ - #ifdef DEBUG moveq #82, %d7 /* 'R' */ moveb %d7,0xfffff907 /* No absolute addresses */ diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c index b91ee85d4b5d..865852806a17 100644 --- a/arch/m68knommu/platform/68328/ints.c +++ b/arch/m68knommu/platform/68328/ints.c @@ -179,10 +179,8 @@ void __init init_IRQ(void) IMR = ~0; for (i = 0; (i < NR_IRQS); i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &intc_irq_chip; + set_irq_chip(irq, &intc_irq_chip); + set_irq_handler(irq, handle_level_irq); } } diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S index 6d3460a39cac..c131c6e1d92d 100644 --- a/arch/m68knommu/platform/68360/entry.S +++ b/arch/m68knommu/platform/68360/entry.S @@ -42,7 +42,7 @@ do_trace: movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/ subql #4,%sp SAVE_SWITCH_STACK - jbsr syscall_trace + jbsr syscall_trace_enter RESTORE_SWITCH_STACK addql #4,%sp movel %sp@(PT_OFF_ORIG_D0),%d1 @@ -56,7 +56,7 @@ do_trace: 1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */ subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK - jbsr syscall_trace + jbsr syscall_trace_leave ret_from_signal: RESTORE_SWITCH_STACK @@ -71,7 +71,12 @@ ENTRY(system_call) jbsr set_esp0 addql #4,%sp - btst #PF_TRACESYS_BIT,%a2@(TASK_FLAGS+PF_TRACESYS_OFF) + movel %sp@(PT_OFF_ORIG_D0),%d0 + + movel %sp,%d1 /* get thread_info pointer */ + andl #-THREAD_SIZE,%d1 + movel %d1,%a2 + btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) jne do_trace cmpl #NR_syscalls,%d0 jcc badsys @@ -124,7 +129,7 @@ Lreturn: */ inthandler: SAVE_ALL - movew %sp@(PT_OFF_VECTOR), %d0 + movew %sp@(PT_OFF_FORMATVEC), %d0 and.l #0x3ff, %d0 lsr.l #0x02, %d0 diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c index 6f22970d8c20..ad96ab1051f0 100644 --- a/arch/m68knommu/platform/68360/ints.c +++ b/arch/m68knommu/platform/68360/ints.c @@ -132,10 +132,8 @@ void init_IRQ(void) pquicc->intr_cimr = 0x00000000; for (i = 0; (i < NR_IRQS); i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &intc_irq_chip; + set_irq_chip(irq, &intc_irq_chip); + set_irq_handler(irq, handle_level_irq); } } diff --git a/arch/m68knommu/platform/68VZ328/config.c b/arch/m68knommu/platform/68VZ328/config.c index fc5c63054e98..eabaabe8af36 100644 --- a/arch/m68knommu/platform/68VZ328/config.c +++ b/arch/m68knommu/platform/68VZ328/config.c @@ -90,11 +90,6 @@ static void init_hardware(char *command, int size) PDIQEG &= ~PD(1); PDIRQEN |= PD(1); /* IRQ enabled */ -#ifdef CONFIG_68328_SERIAL_UART2 - /* Enable RXD TXD port bits to enable UART2 */ - PJSEL &= ~(PJ(5) | PJ(4)); -#endif - #ifdef CONFIG_INIT_LCD /* initialize LCD controller */ LSSA = (long) screen_bits; diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile index f72a0e5d9996..45f501fa4525 100644 --- a/arch/m68knommu/platform/coldfire/Makefile +++ b/arch/m68knommu/platform/coldfire/Makefile @@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 @@ -26,6 +26,7 @@ obj-$(CONFIG_M528x) += pit.o intc-2.o obj-$(CONFIG_M5307) += timers.o intc.o obj-$(CONFIG_M532x) += timers.o intc-simr.o obj-$(CONFIG_M5407) += timers.o intc.o +obj-$(CONFIG_M548x) += sltimers.o intc-2.o obj-y += pinmux.o gpio.o extra-y := head.o diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S index cd79d7e92ce6..5e92bed94b7e 100644 --- a/arch/m68knommu/platform/coldfire/entry.S +++ b/arch/m68knommu/platform/coldfire/entry.S @@ -88,7 +88,7 @@ ENTRY(system_call) movel %d2,PT_OFF_D0(%sp) /* on syscall entry */ subql #4,%sp SAVE_SWITCH_STACK - jbsr syscall_trace + jbsr syscall_trace_enter RESTORE_SWITCH_STACK addql #4,%sp movel %d3,%a0 @@ -96,7 +96,7 @@ ENTRY(system_call) movel %d0,%sp@(PT_OFF_D0) /* save the return value */ subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK - jbsr syscall_trace + jbsr syscall_trace_leave ret_from_signal: RESTORE_SWITCH_STACK diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c index 5598c8b8661f..85daa2b3001a 100644 --- a/arch/m68knommu/platform/coldfire/intc-2.c +++ b/arch/m68knommu/platform/coldfire/intc-2.c @@ -1,5 +1,11 @@ /* - * intc-1.c + * intc-2.c + * + * General interrupt controller code for the many ColdFire cores that use + * interrupt controllers with 63 interrupt sources, organized as 56 fully- + * programmable + 7 fixed-level interrupt sources. This includes the 523x + * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such + * controllers, and the 547x and 548x families which have only one of them. * * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> * @@ -19,21 +25,37 @@ #include <asm/traps.h> /* - * Each vector needs a unique priority and level asscoiated with it. + * Bit definitions for the ICR family of registers. + */ +#define MCFSIM_ICR_LEVEL(l) ((l)<<3) /* Level l intr */ +#define MCFSIM_ICR_PRI(p) (p) /* Priority p intr */ + +/* + * Each vector needs a unique priority and level associated with it. * We don't really care so much what they are, we don't rely on the - * tranditional priority interrupt scheme of the m68k/ColdFire. + * traditional priority interrupt scheme of the m68k/ColdFire. */ -static u8 intc_intpri = 0x36; +static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6); + +#ifdef MCFICM_INTC1 +#define NR_VECS 128 +#else +#define NR_VECS 64 +#endif static void intc_irq_mask(unsigned int irq) { - if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) { + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) { unsigned long imraddr; u32 val, imrbit; irq -= MCFINT_VECBASE; imraddr = MCF_IPSBAR; +#ifdef MCFICM_INTC1 imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0; +#else + imraddr += MCFICM_INTC0; +#endif imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL; imrbit = 0x1 << (irq & 0x1f); @@ -44,13 +66,17 @@ static void intc_irq_mask(unsigned int irq) static void intc_irq_unmask(unsigned int irq) { - if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) { + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + NR_VECS)) { unsigned long intaddr, imraddr, icraddr; u32 val, imrbit; irq -= MCFINT_VECBASE; intaddr = MCF_IPSBAR; +#ifdef MCFICM_INTC1 intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0; +#else + intaddr += MCFICM_INTC0; +#endif imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL); icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f); imrbit = 0x1 << (irq & 0x1f); @@ -67,10 +93,16 @@ static void intc_irq_unmask(unsigned int irq) } } +static int intc_irq_set_type(unsigned int irq, unsigned int type) +{ + return 0; +} + static struct irq_chip intc_irq_chip = { .name = "CF-INTC", .mask = intc_irq_mask, .unmask = intc_irq_unmask, + .set_type = intc_irq_set_type, }; void __init init_IRQ(void) @@ -81,13 +113,14 @@ void __init init_IRQ(void) /* Mask all interrupt sources */ __raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); +#ifdef MCFICM_INTC1 __raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL); +#endif for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; + set_irq_chip(irq, &intc_irq_chip); + set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + set_irq_handler(irq, handle_level_irq); } } diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c index 1b01e79c2f63..bb7048636140 100644 --- a/arch/m68knommu/platform/coldfire/intc-simr.c +++ b/arch/m68knommu/platform/coldfire/intc-simr.c @@ -1,6 +1,8 @@ /* * intc-simr.c * + * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts. + * * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> * * This file is subject to the terms and conditions of the GNU General Public @@ -68,11 +70,9 @@ void __init init_IRQ(void) __raw_writeb(0xff, MCFINTC1_SIMR); for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; - intc_irq_set_type(irq, 0); + set_irq_chip(irq, &intc_irq_chip); + set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + set_irq_handler(irq, handle_level_irq); } } diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c index a4560c86db71..60d2fcbe182b 100644 --- a/arch/m68knommu/platform/coldfire/intc.c +++ b/arch/m68knommu/platform/coldfire/intc.c @@ -143,11 +143,9 @@ void __init init_IRQ(void) mcf_maskimr(0xffffffff); for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; - intc_irq_set_type(irq, 0); + set_irq_chip(irq, &intc_irq_chip); + set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + set_irq_handler(irq, handle_level_irq); } } diff --git a/arch/m68knommu/platform/coldfire/sltimers.c b/arch/m68knommu/platform/coldfire/sltimers.c new file mode 100644 index 000000000000..0a1b937c3e18 --- /dev/null +++ b/arch/m68knommu/platform/coldfire/sltimers.c @@ -0,0 +1,145 @@ +/***************************************************************************/ + +/* + * sltimers.c -- generic ColdFire slice timer support. + * + * Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be> + * based on + * timers.c -- generic ColdFire hardware timer support. + * Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com> + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/profile.h> +#include <linux/clocksource.h> +#include <asm/io.h> +#include <asm/traps.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfslt.h> +#include <asm/mcfsim.h> + +/***************************************************************************/ + +#ifdef CONFIG_HIGHPROFILE + +/* + * By default use Slice Timer 1 as the profiler clock timer. + */ +#define PA(a) (MCF_MBAR + MCFSLT_TIMER1 + (a)) + +/* + * Choose a reasonably fast profile timer. Make it an odd value to + * try and get good coverage of kernel operations. + */ +#define PROFILEHZ 1013 + +irqreturn_t mcfslt_profile_tick(int irq, void *dummy) +{ + /* Reset Slice Timer 1 */ + __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR)); + if (current->pid) + profile_tick(CPU_PROFILING); + return IRQ_HANDLED; +} + +static struct irqaction mcfslt_profile_irq = { + .name = "profile timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = mcfslt_profile_tick, +}; + +void mcfslt_profile_init(void) +{ + printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n", + PROFILEHZ); + + setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq); + + /* Set up TIMER 2 as high speed profile clock */ + __raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT)); + __raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN, + PA(MCFSLT_SCR)); + +} + +#endif /* CONFIG_HIGHPROFILE */ + +/***************************************************************************/ + +/* + * By default use Slice Timer 0 as the system clock timer. + */ +#define TA(a) (MCF_MBAR + MCFSLT_TIMER0 + (a)) + +static u32 mcfslt_cycles_per_jiffy; +static u32 mcfslt_cnt; + +static irqreturn_t mcfslt_tick(int irq, void *dummy) +{ + /* Reset Slice Timer 0 */ + __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR)); + mcfslt_cnt += mcfslt_cycles_per_jiffy; + return arch_timer_interrupt(irq, dummy); +} + +static struct irqaction mcfslt_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = mcfslt_tick, +}; + +static cycle_t mcfslt_read_clk(struct clocksource *cs) +{ + unsigned long flags; + u32 cycles; + u16 scnt; + + local_irq_save(flags); + scnt = __raw_readl(TA(MCFSLT_SCNT)); + cycles = mcfslt_cnt; + local_irq_restore(flags); + + /* substract because slice timers count down */ + return cycles - scnt; +} + +static struct clocksource mcfslt_clk = { + .name = "slt", + .rating = 250, + .read = mcfslt_read_clk, + .shift = 20, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void hw_timer_init(void) +{ + mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ; + /* + * The coldfire slice timer (SLT) runs from STCNT to 0 included, + * then STCNT again and so on. It counts thus actually + * STCNT + 1 steps for 1 tick, not STCNT. So if you want + * n cycles, initialize STCNT with n - 1. + */ + __raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT)); + __raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN, + TA(MCFSLT_SCR)); + /* initialize mcfslt_cnt knowing that slice timers count down */ + mcfslt_cnt = mcfslt_cycles_per_jiffy; + + setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq); + + mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift); + clocksource_register(&mcfslt_clk); + +#ifdef CONFIG_HIGHPROFILE + mcfslt_profile_init(); +#endif +} |