diff options
Diffstat (limited to 'arch/x86/include/asm/tlbflush.h')
| -rw-r--r-- | arch/x86/include/asm/tlbflush.h | 441 |
1 files changed, 41 insertions, 400 deletions
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index 6f66d841262d..8c87a2e0b660 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -13,140 +13,51 @@ #include <asm/pti.h> #include <asm/processor-flags.h> -/* - * The x86 feature is called PCID (Process Context IDentifier). It is similar - * to what is traditionally called ASID on the RISC processors. - * - * We don't use the traditional ASID implementation, where each process/mm gets - * its own ASID and flush/restart when we run out of ASID space. - * - * Instead we have a small per-cpu array of ASIDs and cache the last few mm's - * that came by on this CPU, allowing cheaper switch_mm between processes on - * this CPU. - * - * We end up with different spaces for different things. To avoid confusion we - * use different names for each of them: - * - * ASID - [0, TLB_NR_DYN_ASIDS-1] - * the canonical identifier for an mm - * - * kPCID - [1, TLB_NR_DYN_ASIDS] - * the value we write into the PCID part of CR3; corresponds to the - * ASID+1, because PCID 0 is special. - * - * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS] - * for KPTI each mm has two address spaces and thus needs two - * PCID values, but we can still do with a single ASID denomination - * for each mm. Corresponds to kPCID + 2048. - * - */ - -/* There are 12 bits of space for ASIDS in CR3 */ -#define CR3_HW_ASID_BITS 12 - -/* - * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for - * user/kernel switches - */ -#ifdef CONFIG_PAGE_TABLE_ISOLATION -# define PTI_CONSUMED_PCID_BITS 1 -#else -# define PTI_CONSUMED_PCID_BITS 0 -#endif +void __flush_tlb_all(void); -#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS) +#define TLB_FLUSH_ALL -1UL -/* - * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account - * for them being zero-based. Another -1 is because PCID 0 is reserved for - * use by non-PCID-aware users. - */ -#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2) +void cr4_update_irqsoff(unsigned long set, unsigned long clear); +unsigned long cr4_read_shadow(void); -/* - * 6 because 6 should be plenty and struct tlb_state will fit in two cache - * lines. - */ -#define TLB_NR_DYN_ASIDS 6 - -/* - * Given @asid, compute kPCID - */ -static inline u16 kern_pcid(u16 asid) +/* Set in this cpu's CR4. */ +static inline void cr4_set_bits_irqsoff(unsigned long mask) { - VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); - -#ifdef CONFIG_PAGE_TABLE_ISOLATION - /* - * Make sure that the dynamic ASID space does not confict with the - * bit we are using to switch between user and kernel ASIDs. - */ - BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT)); - - /* - * The ASID being passed in here should have respected the - * MAX_ASID_AVAILABLE and thus never have the switch bit set. - */ - VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT)); -#endif - /* - * The dynamically-assigned ASIDs that get passed in are small - * (<TLB_NR_DYN_ASIDS). They never have the high switch bit set, - * so do not bother to clear it. - * - * If PCID is on, ASID-aware code paths put the ASID+1 into the - * PCID bits. This serves two purposes. It prevents a nasty - * situation in which PCID-unaware code saves CR3, loads some other - * value (with PCID == 0), and then restores CR3, thus corrupting - * the TLB for ASID 0 if the saved ASID was nonzero. It also means - * that any bugs involving loading a PCID-enabled CR3 with - * CR4.PCIDE off will trigger deterministically. - */ - return asid + 1; + cr4_update_irqsoff(mask, 0); } -/* - * Given @asid, compute uPCID - */ -static inline u16 user_pcid(u16 asid) +/* Clear in this cpu's CR4. */ +static inline void cr4_clear_bits_irqsoff(unsigned long mask) { - u16 ret = kern_pcid(asid); -#ifdef CONFIG_PAGE_TABLE_ISOLATION - ret |= 1 << X86_CR3_PTI_PCID_USER_BIT; -#endif - return ret; + cr4_update_irqsoff(0, mask); } -struct pgd_t; -static inline unsigned long build_cr3(pgd_t *pgd, u16 asid) +/* Set in this cpu's CR4. */ +static inline void cr4_set_bits(unsigned long mask) { - if (static_cpu_has(X86_FEATURE_PCID)) { - return __sme_pa(pgd) | kern_pcid(asid); - } else { - VM_WARN_ON_ONCE(asid != 0); - return __sme_pa(pgd); - } + unsigned long flags; + + local_irq_save(flags); + cr4_set_bits_irqsoff(mask); + local_irq_restore(flags); } -static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid) +/* Clear in this cpu's CR4. */ +static inline void cr4_clear_bits(unsigned long mask) { - VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); - /* - * Use boot_cpu_has() instead of this_cpu_has() as this function - * might be called during early boot. This should work even after - * boot because all CPU's the have same capabilities: - */ - VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID)); - return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH; + unsigned long flags; + + local_irq_save(flags); + cr4_clear_bits_irqsoff(mask); + local_irq_restore(flags); } -#ifdef CONFIG_PARAVIRT -#include <asm/paravirt.h> -#else -#define __flush_tlb() __native_flush_tlb() -#define __flush_tlb_global() __native_flush_tlb_global() -#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr) -#endif +#ifndef MODULE +/* + * 6 because 6 should be plenty and struct tlb_state will fit in two cache + * lines. + */ +#define TLB_NR_DYN_ASIDS 6 struct tlb_context { u64 ctx_id; @@ -242,38 +153,7 @@ struct tlb_state { }; DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); -/* - * Blindly accessing user memory from NMI context can be dangerous - * if we're in the middle of switching the current user task or - * switching the loaded mm. It can also be dangerous if we - * interrupted some kernel code that was temporarily using a - * different mm. - */ -static inline bool nmi_uaccess_okay(void) -{ - struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); - struct mm_struct *current_mm = current->mm; - - VM_WARN_ON_ONCE(!loaded_mm); - - /* - * The condition we want to check is - * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though, - * if we're running in a VM with shadow paging, and nmi_uaccess_okay() - * is supposed to be reasonably fast. - * - * Instead, we check the almost equivalent but somewhat conservative - * condition below, and we rely on the fact that switch_mm_irqs_off() - * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3. - */ - if (loaded_mm != current_mm) - return false; - - VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa())); - - return true; -} - +bool nmi_uaccess_okay(void); #define nmi_uaccess_okay nmi_uaccess_okay /* Initialize cr4 shadow for this CPU. */ @@ -282,250 +162,12 @@ static inline void cr4_init_shadow(void) this_cpu_write(cpu_tlbstate.cr4, __read_cr4()); } -static inline void __cr4_set(unsigned long cr4) -{ - lockdep_assert_irqs_disabled(); - this_cpu_write(cpu_tlbstate.cr4, cr4); - __write_cr4(cr4); -} - -/* Set in this cpu's CR4. */ -static inline void cr4_set_bits_irqsoff(unsigned long mask) -{ - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); - if ((cr4 | mask) != cr4) - __cr4_set(cr4 | mask); -} - -/* Clear in this cpu's CR4. */ -static inline void cr4_clear_bits_irqsoff(unsigned long mask) -{ - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); - if ((cr4 & ~mask) != cr4) - __cr4_set(cr4 & ~mask); -} - -/* Set in this cpu's CR4. */ -static inline void cr4_set_bits(unsigned long mask) -{ - unsigned long flags; - - local_irq_save(flags); - cr4_set_bits_irqsoff(mask); - local_irq_restore(flags); -} - -/* Clear in this cpu's CR4. */ -static inline void cr4_clear_bits(unsigned long mask) -{ - unsigned long flags; - - local_irq_save(flags); - cr4_clear_bits_irqsoff(mask); - local_irq_restore(flags); -} - -static inline void cr4_toggle_bits_irqsoff(unsigned long mask) -{ - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); - __cr4_set(cr4 ^ mask); -} - -/* Read the CR4 shadow. */ -static inline unsigned long cr4_read_shadow(void) -{ - return this_cpu_read(cpu_tlbstate.cr4); -} - -/* - * Mark all other ASIDs as invalid, preserves the current. - */ -static inline void invalidate_other_asid(void) -{ - this_cpu_write(cpu_tlbstate.invalidate_other, true); -} - -/* - * Save some of cr4 feature set we're using (e.g. Pentium 4MB - * enable and PPro Global page enable), so that any CPU's that boot - * up after us can get the correct flags. This should only be used - * during boot on the boot cpu. - */ extern unsigned long mmu_cr4_features; extern u32 *trampoline_cr4_features; -static inline void cr4_set_bits_and_update_boot(unsigned long mask) -{ - mmu_cr4_features |= mask; - if (trampoline_cr4_features) - *trampoline_cr4_features = mmu_cr4_features; - cr4_set_bits(mask); -} - extern void initialize_tlbstate_and_flush(void); /* - * Given an ASID, flush the corresponding user ASID. We can delay this - * until the next time we switch to it. - * - * See SWITCH_TO_USER_CR3. - */ -static inline void invalidate_user_asid(u16 asid) -{ - /* There is no user ASID if address space separation is off */ - if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION)) - return; - - /* - * We only have a single ASID if PCID is off and the CR3 - * write will have flushed it. - */ - if (!cpu_feature_enabled(X86_FEATURE_PCID)) - return; - - if (!static_cpu_has(X86_FEATURE_PTI)) - return; - - __set_bit(kern_pcid(asid), - (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask)); -} - -/* - * flush the entire current user mapping - */ -static inline void __native_flush_tlb(void) -{ - /* - * Preemption or interrupts must be disabled to protect the access - * to the per CPU variable and to prevent being preempted between - * read_cr3() and write_cr3(). - */ - WARN_ON_ONCE(preemptible()); - - invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); - - /* If current->mm == NULL then the read_cr3() "borrows" an mm */ - native_write_cr3(__native_read_cr3()); -} - -/* - * flush everything - */ -static inline void __native_flush_tlb_global(void) -{ - unsigned long cr4, flags; - - if (static_cpu_has(X86_FEATURE_INVPCID)) { - /* - * Using INVPCID is considerably faster than a pair of writes - * to CR4 sandwiched inside an IRQ flag save/restore. - * - * Note, this works with CR4.PCIDE=0 or 1. - */ - invpcid_flush_all(); - return; - } - - /* - * Read-modify-write to CR4 - protect it from preemption and - * from interrupts. (Use the raw variant because this code can - * be called from deep inside debugging code.) - */ - raw_local_irq_save(flags); - - cr4 = this_cpu_read(cpu_tlbstate.cr4); - /* toggle PGE */ - native_write_cr4(cr4 ^ X86_CR4_PGE); - /* write old PGE again and flush TLBs */ - native_write_cr4(cr4); - - raw_local_irq_restore(flags); -} - -/* - * flush one page in the user mapping - */ -static inline void __native_flush_tlb_one_user(unsigned long addr) -{ - u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); - - asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); - - if (!static_cpu_has(X86_FEATURE_PTI)) - return; - - /* - * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1. - * Just use invalidate_user_asid() in case we are called early. - */ - if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) - invalidate_user_asid(loaded_mm_asid); - else - invpcid_flush_one(user_pcid(loaded_mm_asid), addr); -} - -/* - * flush everything - */ -static inline void __flush_tlb_all(void) -{ - /* - * This is to catch users with enabled preemption and the PGE feature - * and don't trigger the warning in __native_flush_tlb(). - */ - VM_WARN_ON_ONCE(preemptible()); - - if (boot_cpu_has(X86_FEATURE_PGE)) { - __flush_tlb_global(); - } else { - /* - * !PGE -> !PCID (setup_pcid()), thus every flush is total. - */ - __flush_tlb(); - } -} - -/* - * flush one page in the kernel mapping - */ -static inline void __flush_tlb_one_kernel(unsigned long addr) -{ - count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); - - /* - * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its - * paravirt equivalent. Even with PCID, this is sufficient: we only - * use PCID if we also use global PTEs for the kernel mapping, and - * INVLPG flushes global translations across all address spaces. - * - * If PTI is on, then the kernel is mapped with non-global PTEs, and - * __flush_tlb_one_user() will flush the given address for the current - * kernel address space and for its usermode counterpart, but it does - * not flush it for other address spaces. - */ - __flush_tlb_one_user(addr); - - if (!static_cpu_has(X86_FEATURE_PTI)) - return; - - /* - * See above. We need to propagate the flush to all other address - * spaces. In principle, we only need to propagate it to kernelmode - * address spaces, but the extra bookkeeping we would need is not - * worth it. - */ - invalidate_other_asid(); -} - -#define TLB_FLUSH_ALL -1UL - -/* * TLB flushing: * * - flush_tlb_all() flushes all processes TLBs @@ -563,7 +205,15 @@ struct flush_tlb_info { bool freed_tables; }; -#define local_flush_tlb() __flush_tlb() +void flush_tlb_local(void); +void flush_tlb_one_user(unsigned long addr); +void flush_tlb_one_kernel(unsigned long addr); +void flush_tlb_others(const struct cpumask *cpumask, + const struct flush_tlb_info *info); + +#ifdef CONFIG_PARAVIRT +#include <asm/paravirt.h> +#endif #define flush_tlb_mm(mm) \ flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL, true) @@ -585,9 +235,6 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a) flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, PAGE_SHIFT, false); } -void native_flush_tlb_others(const struct cpumask *cpumask, - const struct flush_tlb_info *info); - static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) { /* @@ -608,12 +255,6 @@ static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch, extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch); -#ifndef CONFIG_PARAVIRT -#define flush_tlb_others(mask, info) \ - native_flush_tlb_others(mask, info) - -#define paravirt_tlb_remove_table(tlb, page) \ - tlb_remove_page(tlb, (void *)(page)) -#endif +#endif /* !MODULE */ #endif /* _ASM_X86_TLBFLUSH_H */ |