diff options
Diffstat (limited to 'arch/ppc')
| -rw-r--r-- | arch/ppc/8xx_io/cs4218_tdm.c | 1 | ||||
| -rw-r--r-- | arch/ppc/Kconfig | 9 | ||||
| -rw-r--r-- | arch/ppc/boot/simple/Makefile | 4 | ||||
| -rw-r--r-- | arch/ppc/boot/simple/misc.c | 15 | ||||
| -rw-r--r-- | arch/ppc/configs/gemini_defconfig | 618 | ||||
| -rw-r--r-- | arch/ppc/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc/kernel/dma-mapping.c | 442 | ||||
| -rw-r--r-- | arch/ppc/kernel/head.S | 18 | ||||
| -rw-r--r-- | arch/ppc/kernel/ppc_ksyms.c | 1 | ||||
| -rw-r--r-- | arch/ppc/lib/rheap.c | 3 | ||||
| -rw-r--r-- | arch/ppc/mm/pgtable.c | 5 | ||||
| -rw-r--r-- | arch/ppc/platforms/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc/platforms/gemini.h | 165 | ||||
| -rw-r--r-- | arch/ppc/platforms/gemini_pci.c | 41 | ||||
| -rw-r--r-- | arch/ppc/platforms/gemini_prom.S | 90 | ||||
| -rw-r--r-- | arch/ppc/platforms/gemini_serial.h | 40 | ||||
| -rw-r--r-- | arch/ppc/platforms/gemini_setup.c | 577 | ||||
| -rw-r--r-- | arch/ppc/platforms/mpc866ads_setup.c | 2 | ||||
| -rw-r--r-- | arch/ppc/syslib/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc/syslib/m8260_pci_erratum9.c | 3 | ||||
| -rw-r--r-- | arch/ppc/syslib/m8xx_setup.c | 2 | ||||
| -rw-r--r-- | arch/ppc/syslib/ppc85xx_rio.c | 2 | ||||
| -rw-r--r-- | arch/ppc/xmon/ppc-opc.c | 7 | ||||
| -rw-r--r-- | arch/ppc/xmon/start.c | 5 |
24 files changed, 13 insertions, 2040 deletions
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index b7bb5f0b3c5f..684ed04eb8b8 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1379,7 +1379,6 @@ static void cs_nosound(unsigned long xx) } static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0); -}; static void cs_mksound(unsigned int hz, unsigned int ticks) { diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 8eb82efe05a1..c22e60619d9b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -670,15 +670,6 @@ config RADSTONE_PPC7D config PAL4 bool "SBS-Palomar4" -config GEMINI - bool "Synergy-Gemini" - depends on BROKEN - select PPC_INDIRECT_PCI - help - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - <http://www.synergymicro.com/PressRel/97_10_15.html>. - config EST8260 bool "EST8260" ---help--- diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 28be01b99c44..bcfb6cde70c4 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -116,10 +116,6 @@ zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o end-$(CONFIG_CHESTNUT) := chestnut - zimage-$(CONFIG_GEMINI) := zImage-STRIPELF -zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF - end-$(CONFIG_GEMINI) := gemini - extra.o-$(CONFIG_KATANA) := misc-katana.o end-$(CONFIG_KATANA) := katana cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index a5df08963695..c3d3305eb5ca 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -42,14 +42,11 @@ #endif /* Will / Can the user give input? - * Val Henson has requested that Gemini doesn't wait for the - * user to edit the cmdline or not. */ #if (defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_VGA_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE)) \ - && !defined(CONFIG_GEMINI) + || defined(CONFIG_SERIAL_MPSC_CONSOLE)) #define INTERACTIVE_CONSOLE 1 #endif @@ -178,16 +175,6 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) if (keyb_present) CRT_tstc(); /* Forces keyboard to be initialized */ -#ifdef CONFIG_GEMINI - /* - * If cmd_line is empty and cmd_preset is not, copy cmd_preset - * to cmd_line. This way we can override cmd_preset with the - * command line from Smon. - */ - - if ( (cmd_line[0] == '\0') && (cmd_preset[0] != '\0')) - memcpy (cmd_line, cmd_preset, sizeof(cmd_preset)); -#endif /* Display standard Linux/PPC boot prompt for kernel args */ puts("\nLinux/PPC load: "); diff --git a/arch/ppc/configs/gemini_defconfig b/arch/ppc/configs/gemini_defconfig deleted file mode 100644 index ebcd17b097f1..000000000000 --- a/arch/ppc/configs/gemini_defconfig +++ /dev/null @@ -1,618 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -CONFIG_GEMINI=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_ALTIVEC=y -CONFIG_TAU=y -# CONFIG_TAU_INT is not set -# CONFIG_TAU_AVERAGE is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_PPC601_SYNC_FIX is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C7xx is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 466437f4bcbb..6b4f022111e7 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -12,7 +12,6 @@ obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o obj-$(CONFIG_MODULES) += ppc_ksyms.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c deleted file mode 100644 index 10fec7363962..000000000000 --- a/arch/ppc/kernel/dma-mapping.c +++ /dev/null @@ -1,442 +0,0 @@ -/* - * PowerPC version derived from arch/arm/mm/consistent.c - * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) - * - * Copyright (C) 2000 Russell King - * - * Consistent memory allocators. Used for DMA devices that want to - * share uncached memory with the processor core. The function return - * is the virtual address and 'dma_handle' is the physical address. - * Mostly stolen from the ARM port, with some changes for PowerPC. - * -- Dan - * - * Reorganized to get rid of the arch-specific consistent_* functions - * and provide non-coherent implementations for the DMA API. -Matt - * - * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() - * implementation. This is pulled straight from ARM and barely - * modified. -Matt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/stddef.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/highmem.h> -#include <linux/dma-mapping.h> -#include <linux/hardirq.h> - -#include <asm/pgalloc.h> -#include <asm/prom.h> -#include <asm/io.h> -#include <asm/mmu_context.h> -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <asm/uaccess.h> -#include <asm/smp.h> -#include <asm/machdep.h> - -int map_page(unsigned long va, phys_addr_t pa, int flags); - -#include <asm/tlbflush.h> - -/* - * This address range defaults to a value that is safe for all - * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It - * can be further configured for specific applications under - * the "Advanced Setup" menu. -Matt - */ -#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) -#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) - -/* - * This is the page table (2MB) covering uncached, DMA consistent allocations - */ -static pte_t *consistent_pte; -static DEFINE_SPINLOCK(consistent_lock); - -/* - * VM region handling support. - * - * This should become something generic, handling VM region allocations for - * vmalloc and similar (ioremap, module space, etc). - * - * I envisage vmalloc()'s supporting vm_struct becoming: - * - * struct vm_struct { - * struct vm_region region; - * unsigned long flags; - * struct page **pages; - * unsigned int nr_pages; - * unsigned long phys_addr; - * }; - * - * get_vm_area() would then call vm_region_alloc with an appropriate - * struct vm_region head (eg): - * - * struct vm_region vmalloc_head = { - * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), - * .vm_start = VMALLOC_START, - * .vm_end = VMALLOC_END, - * }; - * - * However, vmalloc_head.vm_start is variable (typically, it is dependent on - * the amount of RAM found at boot time.) I would imagine that get_vm_area() - * would have to initialise this each time prior to calling vm_region_alloc(). - */ -struct vm_region { - struct list_head vm_list; - unsigned long vm_start; - unsigned long vm_end; -}; - -static struct vm_region consistent_head = { - .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_start = CONSISTENT_BASE, - .vm_end = CONSISTENT_END, -}; - -static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) -{ - unsigned long addr = head->vm_start, end = head->vm_end - size; - unsigned long flags; - struct vm_region *c, *new; - - new = kmalloc(sizeof(struct vm_region), gfp); - if (!new) - goto out; - - spin_lock_irqsave(&consistent_lock, flags); - - list_for_each_entry(c, &head->vm_list, vm_list) { - if ((addr + size) < addr) - goto nospc; - if ((addr + size) <= c->vm_start) - goto found; - addr = c->vm_end; - if (addr > end) - goto nospc; - } - - found: - /* - * Insert this entry _before_ the one we found. - */ - list_add_tail(&new->vm_list, &c->vm_list); - new->vm_start = addr; - new->vm_end = addr + size; - - spin_unlock_irqrestore(&consistent_lock, flags); - return new; - - nospc: - spin_unlock_irqrestore(&consistent_lock, flags); - kfree(new); - out: - return NULL; -} - -static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr) -{ - struct vm_region *c; - - list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_start == addr) - goto out; - } - c = NULL; - out: - return c; -} - -/* - * Allocate DMA-coherent memory space and return both the kernel remapped - * virtual and bus address for that space. - */ -void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) -{ - struct page *page; - struct vm_region *c; - unsigned long order; - u64 mask = 0x00ffffff, limit; /* ISA default */ - - if (!consistent_pte) { - printk(KERN_ERR "%s: not initialised\n", __func__); - dump_stack(); - return NULL; - } - - size = PAGE_ALIGN(size); - limit = (mask + 1) & ~mask; - if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { - printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", - size, mask); - return NULL; - } - - order = get_order(size); - - if (mask != 0xffffffff) - gfp |= GFP_DMA; - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - /* - * Invalidate any data that might be lurking in the - * kernel direct-mapped region for device DMA. - */ - { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - flush_dcache_range(kaddr, kaddr + size); - } - - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = vm_region_alloc(&consistent_head, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); - if (c) { - unsigned long vaddr = c->vm_start; - pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); - struct page *end = page + (1 << order); - - split_page(page, order); - - /* - * Set the "dma handle" - */ - *handle = page_to_bus(page); - - do { - BUG_ON(!pte_none(*pte)); - - SetPageReserved(page); - set_pte_at(&init_mm, vaddr, - pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); - page++; - pte++; - vaddr += PAGE_SIZE; - } while (size -= PAGE_SIZE); - - /* - * Free the otherwise unused pages. - */ - while (page < end) { - __free_page(page); - page++; - } - - return (void *)c->vm_start; - } - - if (page) - __free_pages(page, order); - no_page: - return NULL; -} -EXPORT_SYMBOL(__dma_alloc_coherent); - -/* - * free a page as defined by the above mapping. - */ -void __dma_free_coherent(size_t size, void *vaddr) -{ - struct vm_region *c; - unsigned long flags, addr; - pte_t *ptep; - - size = PAGE_ALIGN(size); - - spin_lock_irqsave(&consistent_lock, flags); - - c = vm_region_find(&consistent_head, (unsigned long)vaddr); - if (!c) - goto no_area; - - if ((c->vm_end - c->vm_start) != size) { - printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } - - ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); - addr = c->vm_start; - do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); - unsigned long pfn; - - ptep++; - addr += PAGE_SIZE; - - if (!pte_none(pte) && pte_present(pte)) { - pfn = pte_pfn(pte); - - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); - - __free_page(page); - continue; - } - } - - printk(KERN_CRIT "%s: bad page in kernel page table\n", - __func__); - } while (size -= PAGE_SIZE); - - flush_tlb_kernel_range(c->vm_start, c->vm_end); - - list_del(&c->vm_list); - - spin_unlock_irqrestore(&consistent_lock, flags); - - kfree(c); - return; - - no_area: - spin_unlock_irqrestore(&consistent_lock, flags); - printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", - __func__, vaddr); - dump_stack(); -} -EXPORT_SYMBOL(__dma_free_coherent); - -/* - * Initialise the consistent memory allocation. - */ -static int __init dma_alloc_init(void) -{ - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - int ret = 0; - - do { - pgd = pgd_offset(&init_mm, CONSISTENT_BASE); - pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE); - if (!pmd) { - printk(KERN_ERR "%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - WARN_ON(!pmd_none(*pmd)); - - pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); - if (!pte) { - printk(KERN_ERR "%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte = pte; - } while (0); - - return ret; -} - -core_initcall(dma_alloc_init); - -/* - * make an area consistent. - */ -void __dma_sync(void *vaddr, size_t size, int direction) -{ - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; - - switch (direction) { - case DMA_NONE: - BUG(); - case DMA_FROM_DEVICE: /* invalidate only */ - invalidate_dcache_range(start, end); - break; - case DMA_TO_DEVICE: /* writeback only */ - clean_dcache_range(start, end); - break; - case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - flush_dcache_range(start, end); - break; - } -} -EXPORT_SYMBOL(__dma_sync); - -#ifdef CONFIG_HIGHMEM -/* - * __dma_sync_page() implementation for systems using highmem. - * In this case, each page of a buffer must be kmapped/kunmapped - * in order to have a virtual address for __dma_sync(). This must - * not sleep so kmap_atomic()/kunmap_atomic() are used. - * - * Note: yes, it is possible and correct to have a buffer extend - * beyond the first page. - */ -static inline void __dma_sync_page_highmem(struct page *page, - unsigned long offset, size_t size, int direction) -{ - size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); - size_t cur_size = seg_size; - unsigned long flags, start, seg_offset = offset; - int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; - int seg_nr = 0; - - local_irq_save(flags); - - do { - start = (unsigned long)kmap_atomic(page + seg_nr, - KM_PPC_SYNC_PAGE) + seg_offset; - - /* Sync this buffer segment */ - __dma_sync((void *)start, seg_size, direction); - kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); - seg_nr++; - - /* Calculate next buffer segment size */ - seg_size = min((size_t)PAGE_SIZE, size - cur_size); - - /* Add the segment size to our running total */ - cur_size += seg_size; - seg_offset = 0; - } while (seg_nr < nr_segs); - - local_irq_restore(flags); -} -#endif /* CONFIG_HIGHMEM */ - -/* - * __dma_sync_page makes memory consistent. identical to __dma_sync, but - * takes a struct page instead of a virtual address - */ -void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction) -{ -#ifdef CONFIG_HIGHMEM - __dma_sync_page_highmem(page, offset, size, direction); -#else - unsigned long start = (unsigned long)page_address(page) + offset; - __dma_sync((void *)start, size, direction); -#endif -} -EXPORT_SYMBOL(__dma_sync_page); diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 100052aaea9a..c7cb9d5f24a3 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -310,12 +310,7 @@ i##n: \ /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ -#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP) - . = 0x100 - b __secondary_start_gemini -#else EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) -#endif /* Machine check */ . = 0x200 @@ -897,19 +892,6 @@ fix_mem_constants: #endif /* CONFIG_APUS */ #ifdef CONFIG_SMP -#ifdef CONFIG_GEMINI - .globl __secondary_start_gemini -__secondary_start_gemini: - mfspr r4,SPRN_HID0 - ori r4,r4,HID0_ICFI - li r3,0 - ori r3,r3,HID0_ICE - andc r4,r4,r3 - mtspr SPRN_HID0,r4 - sync - b __secondary_start -#endif /* CONFIG_GEMINI */ - .globl __secondary_start_pmac_0 __secondary_start_pmac_0: /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index c8b65ca8a350..1f49503317cb 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -43,6 +43,7 @@ #include <asm/div64.h> #include <asm/xmon.h> #include <asm/signal.h> +#include <asm/dcr.h> #ifdef CONFIG_8xx #include <asm/commproc.h> diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c index 31e511856dc5..d40700795a9c 100644 --- a/arch/ppc/lib/rheap.c +++ b/arch/ppc/lib/rheap.c @@ -14,6 +14,7 @@ */ #include <linux/types.h> #include <linux/errno.h> +#include <linux/kernel.h> #include <linux/mm.h> #include <linux/slab.h> @@ -654,7 +655,7 @@ void rh_dump(rh_info_t * info) int maxnr; int i, nr; - maxnr = sizeof(st) / sizeof(st[0]); + maxnr = ARRAY_SIZE(st); printk(KERN_INFO "info @0x%p (%d slots empty / %d max)\n", diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 354a9408f024..82b06a1ef95d 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -313,11 +313,8 @@ void __init mapin_ram(void) } } -/* is x a power of 2? */ -#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) - /* is x a power of 4? */ -#define is_power_of_4(x) ((x) != 0 && (((x) & (x-1)) == 0) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 90c622294423..e17fad470621 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_CHESTNUT) += chestnut.o -obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o diff --git a/arch/ppc/platforms/gemini.h b/arch/ppc/platforms/gemini.h deleted file mode 100644 index 5528fd0a1216..000000000000 --- a/arch/ppc/platforms/gemini.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Onboard registers and descriptions for Synergy Microsystems' - * "Gemini" boards. - * - */ -#ifdef __KERNEL__ -#ifndef __PPC_GEMINI_H -#define __PPC_GEMINI_H - -/* Registers */ - -#define GEMINI_SERIAL_B (0xffeffb00) -#define GEMINI_SERIAL_A (0xffeffb08) -#define GEMINI_USWITCH (0xffeffd00) -#define GEMINI_BREV (0xffeffe00) -#define GEMINI_BECO (0xffeffe08) -#define GEMINI_FEAT (0xffeffe10) -#define GEMINI_BSTAT (0xffeffe18) -#define GEMINI_CPUSTAT (0xffeffe20) -#define GEMINI_L2CFG (0xffeffe30) -#define GEMINI_MEMCFG (0xffeffe38) -#define GEMINI_FLROM (0xffeffe40) -#define GEMINI_P0PCI (0xffeffe48) -#define GEMINI_FLWIN (0xffeffe50) -#define GEMINI_P0INTMASK (0xffeffe60) -#define GEMINI_P0INTAP (0xffeffe68) -#define GEMINI_PCIERR (0xffeffe70) -#define GEMINI_LEDBASE (0xffeffe80) -#define GEMINI_RTC (0xffe9fff8) -#define GEMINI_LEDS 8 -#define GEMINI_SWITCHES 8 - - -/* Flash ROM bit definitions */ -#define GEMINI_FLS_WEN (1<<0) -#define GEMINI_FLS_JMP (1<<6) -#define GEMINI_FLS_BOOT (1<<7) - -/* Memory bit definitions */ -#define GEMINI_MEM_TYPE_MASK 0xc0 -#define GEMINI_MEM_SIZE_MASK 0x38 -#define GEMINI_MEM_BANK_MASK 0x07 - -/* L2 cache bit definitions */ -#define GEMINI_L2_SIZE_MASK 0xc0 -#define GEMINI_L2_RATIO_MASK 0x03 - -/* Timebase register bit definitons */ -#define GEMINI_TIMEB0_EN (1<<0) -#define GEMINI_TIMEB1_EN (1<<1) -#define GEMINI_TIMEB2_EN (1<<2) -#define GEMINI_TIMEB3_EN (1<<3) - -/* CPU status bit definitions */ -#define GEMINI_CPU_ID_MASK 0x03 -#define GEMINI_CPU_COUNT_MASK 0x0c -#define GEMINI_CPU0_HALTED (1<<4) -#define GEMINI_CPU1_HALTED (1<<5) -#define GEMINI_CPU2_HALTED (1<<6) -#define GEMINI_CPU3_HALTED (1<<7) - -/* Board status bit definitions */ -#define GEMINI_BRD_FAIL (1<<0) /* FAIL led is lit */ -#define GEMINI_BRD_BUS_MASK 0x0c /* PowerPC bus speed */ - -/* Board family/feature bit descriptions */ -#define GEMINI_FEAT_HAS_FLASH (1<<0) -#define GEMINI_FEAT_HAS_ETH (1<<1) -#define GEMINI_FEAT_HAS_SCSI (1<<2) -#define GEMINI_FEAT_HAS_P0 (1<<3) -#define GEMINI_FEAT_FAM_MASK 0xf0 - -/* Mod/ECO bit definitions */ -#define GEMINI_ECO_LEVEL_MASK 0x0f -#define GEMINI_MOD_MASK 0xf0 - -/* Type/revision bit definitions */ -#define GEMINI_REV_MASK 0x0f -#define GEMINI_TYPE_MASK 0xf0 - -/* User switch definitions */ -#define GEMINI_SWITCH_VERBOSE 1 /* adds "debug" to boot cmd line */ -#define GEMINI_SWITCH_SINGLE_USER 7 /* boots into "single-user" mode */ - -#define SGS_RTC_CONTROL 0 -#define SGS_RTC_SECONDS 1 -#define SGS_RTC_MINUTES 2 -#define SGS_RTC_HOURS 3 -#define SGS_RTC_DAY 4 -#define SGS_RTC_DAY_OF_MONTH 5 -#define SGS_RTC_MONTH 6 -#define SGS_RTC_YEAR 7 - -#define SGS_RTC_SET 0x80 -#define SGS_RTC_IS_STOPPED 0x80 - -#define GRACKLE_CONFIG_ADDR_ADDR (0xfec00000) -#define GRACKLE_CONFIG_DATA_ADDR (0xfee00000) - -#define GEMINI_BOOT_INIT (0xfff00100) - -#ifndef __ASSEMBLY__ - -static inline void grackle_write( unsigned long addr, unsigned long data ) -{ - __asm__ __volatile__( - " stwbrx %1, 0, %0\n \ - sync\n \ - stwbrx %3, 0, %2\n \ - sync " - : /* no output */ - : "r" (GRACKLE_CONFIG_ADDR_ADDR), "r" (addr), - "r" (GRACKLE_CONFIG_DATA_ADDR), "r" (data)); -} - -static inline unsigned long grackle_read( unsigned long addr ) -{ - unsigned long val; - - __asm__ __volatile__( - " stwbrx %1, 0, %2\n \ - sync\n \ - lwbrx %0, 0, %3\n \ - sync " - : "=r" (val) - : "r" (addr), "r" (GRACKLE_CONFIG_ADDR_ADDR), - "r" (GRACKLE_CONFIG_DATA_ADDR)); - - return val; -} - -static inline void gemini_led_on( int led ) -{ - if (led >= 0 && led < GEMINI_LEDS) - *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 1; -} - -static inline void gemini_led_off(int led) -{ - if (led >= 0 && led < GEMINI_LEDS) - *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 0; -} - -static inline int gemini_led_val(int led) -{ - int val = 0; - if (led >= 0 && led < GEMINI_LEDS) - val = *(unsigned char *)(GEMINI_LEDBASE + (led<<3)); - return (val & 0x1); -} - -/* returns processor id from the board */ -static inline int gemini_processor(void) -{ - unsigned char cpu = *(unsigned char *)(GEMINI_CPUSTAT); - return (int) ((cpu == 0) ? 4 : (cpu & GEMINI_CPU_ID_MASK)); -} - - -extern void _gemini_reboot(void); -extern void gemini_prom_init(void); -extern void gemini_init_l2(void); -#endif /* __ASSEMBLY__ */ -#endif -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/gemini_pci.c b/arch/ppc/platforms/gemini_pci.c deleted file mode 100644 index 95656091ba2b..000000000000 --- a/arch/ppc/platforms/gemini_pci.c +++ /dev/null @@ -1,41 +0,0 @@ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include <asm/machdep.h> -#include <platforms/gemini.h> -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pci-bridge.h> - -void __init gemini_pcibios_fixup(void) -{ - int i; - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) { - for(i = 0; i < 6; i++) { - if (dev->resource[i].flags & IORESOURCE_IO) { - dev->resource[i].start |= (0xfe << 24); - dev->resource[i].end |= (0xfe << 24); - } - } - } -} - - -/* The "bootloader" for Synergy boards does none of this for us, so we need to - lay it all out ourselves... --Dan */ -void __init gemini_find_bridges(void) -{ - struct pci_controller* hose; - - ppc_md.pcibios_fixup = gemini_pcibios_fixup; - - hose = pcibios_alloc_controller(); - if (!hose) - return; - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); -} diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S deleted file mode 100644 index e8c84d24f01f..000000000000 --- a/arch/ppc/platforms/gemini_prom.S +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Not really prom support code (yet), but sort of anti-prom code. The current - * bootloader does a number of things it shouldn't and doesn't do things that it - * should. The stuff in here is mainly a hodge-podge collection of setup code - * to get the board up and running. - * ---Dan - */ - -#include <asm/reg.h> -#include <asm/page.h> -#include <platforms/gemini.h> -#include <asm/ppc_asm.h> - -/* - * On 750's the MMU is on when Linux is booted, so we need to clear out the - * bootloader's BAT settings, make sure we're in supervisor state (gotcha!), - * and turn off the MMU. - * - */ - -_GLOBAL(gemini_prom_init) -#ifdef CONFIG_SMP - /* Since the MMU's on, get stuff in rom space that we'll need */ - lis r4,GEMINI_CPUSTAT@h - ori r4,r4,GEMINI_CPUSTAT@l - lbz r5,0(r4) - andi. r5,r5,3 - mr r24,r5 /* cpu # used later on */ -#endif - mfmsr r4 - li r3,MSR_PR /* ensure supervisor! */ - ori r3,r3,MSR_IR|MSR_DR - andc r4,r4,r3 - mtmsr r4 - isync -#if 0 - /* zero out the bats now that the MMU is off */ -prom_no_mmu: - li r3,0 - mtspr SPRN_IBAT0U,r3 - mtspr SPRN_IBAT0L,r3 - mtspr SPRN_IBAT1U,r3 - mtspr SPRN_IBAT1L,r3 - mtspr SPRN_IBAT2U,r3 - mtspr SPRN_IBAT2L,r3 - mtspr SPRN_IBAT3U,r3 - mtspr SPRN_IBAT3L,r3 - - mtspr SPRN_DBAT0U,r3 - mtspr SPRN_DBAT0L,r3 - mtspr SPRN_DBAT1U,r3 - mtspr SPRN_DBAT1L,r3 - mtspr SPRN_DBAT2U,r3 - mtspr SPRN_DBAT2L,r3 - mtspr SPRN_DBAT3U,r3 - mtspr SPRN_DBAT3L,r3 -#endif - - /* the bootloader (as far as I'm currently aware) doesn't mess with page - tables, but since we're already here, might as well zap these, too */ - li r4,0 - mtspr SPRN_SDR1,r4 - - li r4,16 - mtctr r4 - li r3,0 - li r4,0 -3: mtsrin r3,r4 - addi r3,r3,1 - bdnz 3b - -#ifdef CONFIG_SMP - /* The 750 book (and Mot/IBM support) says that this will "assist" snooping - when in SMP. Not sure yet whether this should stay or leave... */ - mfspr r4,SPRN_HID0 - ori r4,r4,HID0_ABE - mtspr SPRN_HID0,r4 - sync -#endif /* CONFIG_SMP */ - blr - -/* apparently, SMon doesn't pay attention to HID0[SRST]. Disable the MMU and - branch to 0xfff00100 */ -_GLOBAL(_gemini_reboot) - lis r5,GEMINI_BOOT_INIT@h - ori r5,r5,GEMINI_BOOT_INIT@l - li r6,MSR_IP - mtspr SPRN_SRR0,r5 - mtspr SPRN_SRR1,r6 - rfi diff --git a/arch/ppc/platforms/gemini_serial.h b/arch/ppc/platforms/gemini_serial.h deleted file mode 100644 index b915eff79fdb..000000000000 --- a/arch/ppc/platforms/gemini_serial.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASMPPC_GEMINI_SERIAL_H -#define __ASMPPC_GEMINI_SERIAL_H - -#include <platforms/gemini.h> - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 4 -#endif - -/* Rate for the 24.576 Mhz clock for the onboard serial chip */ -#define BASE_BAUD (24576000 / 16) - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF) -#endif - -#define STD_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, GEMINI_SERIAL_A, 15, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, GEMINI_SERIAL_B, 14, STD_COM_FLAGS }, /* ttyS1 */ \ - -#ifdef CONFIG_GEMINI_PU32 -#define PU32_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, NULL, 0, STD_COM_FLAGS }, -#else -#define PU32_SERIAL_PORT_DEFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - PU32_SERIAL_PORT_DEFNS - -#endif -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c deleted file mode 100644 index f48048f362a8..000000000000 --- a/arch/ppc/platforms/gemini_setup.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - * Synergy Microsystems board support by Dan Cox (dan@synergymicro.com) - * - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/time.h> -#include <linux/kdev_t.h> -#include <linux/types.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/bcd.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/m48t35.h> -#include <platforms/gemini.h> -#include <asm/time.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/machdep.h> - -void gemini_find_bridges(void); -static int gemini_get_clock_speed(void); -extern void gemini_pcibios_fixup(void); - -static char *gemini_board_families[] = { - "VGM", "VSS", "KGM", "VGR", "VCM", "VCS", "KCM", "VCR" -}; -static int gemini_board_count = sizeof(gemini_board_families) / - sizeof(gemini_board_families[0]); - -static unsigned int cpu_7xx[16] = { - 0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; -static unsigned int cpu_6xx[16] = { - 0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0 -}; - -/* - * prom_init is the Gemini version of prom.c:prom_init. We only need - * the BSS clearing code, so I copied that out of prom.c. This is a - * lot simpler than hacking prom.c so it will build with Gemini. -VAL - */ - -#define PTRRELOC(x) ((typeof(x))((unsigned long)(x) + offset)) - -unsigned long -prom_init(void) -{ - unsigned long offset = reloc_offset(); - unsigned long phys; - extern char __bss_start, _end; - - /* First zero the BSS -- use memset, some arches don't have - * caches on yet */ - memset_io(PTRRELOC(&__bss_start),0 , &_end - &__bss_start); - - /* Default */ - phys = offset + KERNELBASE; - - gemini_prom_init(); - - return phys; -} - -int -gemini_show_cpuinfo(struct seq_file *m) -{ - unsigned char reg, rev; - char *family; - unsigned int type; - - reg = readb(GEMINI_FEAT); - family = gemini_board_families[((reg>>4) & 0xf)]; - if (((reg>>4) & 0xf) > gemini_board_count) - printk(KERN_ERR "cpuinfo(): unable to determine board family\n"); - - reg = readb(GEMINI_BREV); - type = (reg>>4) & 0xf; - rev = reg & 0xf; - - reg = readb(GEMINI_BECO); - - seq_printf(m, "machine\t\t: Gemini %s%d, rev %c, eco %d\n", - family, type, (rev + 'A'), (reg & 0xf)); - - seq_printf(m, "board\t\t: Gemini %s", family); - if (type > 9) - seq_printf(m, "%c", (type - 10) + 'A'); - else - seq_printf(m, "%d", type); - - seq_printf(m, ", rev %c, eco %d\n", (rev + 'A'), (reg & 0xf)); - - seq_printf(m, "clock\t\t: %dMhz\n", gemini_get_clock_speed()); - - return 0; -} - -static u_char gemini_openpic_initsenses[] = { - 1, - 1, - 1, - 1, - 0, - 0, - 1, /* remainder are level-triggered */ -}; - -#define GEMINI_MPIC_ADDR (0xfcfc0000) -#define GEMINI_MPIC_PCI_CFG (0x80005800) - -void __init gemini_openpic_init(void) -{ - - OpenPIC_Addr = (volatile struct OpenPIC *) - grackle_read(GEMINI_MPIC_PCI_CFG + 0x10); - OpenPIC_InitSenses = gemini_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof( gemini_openpic_initsenses ); - - ioremap( GEMINI_MPIC_ADDR, OPENPIC_SIZE); -} - - -extern unsigned long loops_per_jiffy; -extern int root_mountflags; -extern char cmd_line[]; - -void -gemini_heartbeat(void) -{ - static unsigned long led = GEMINI_LEDBASE+(4*8); - static char direction = 8; - - - /* We only want to do this on 1 CPU */ - if (smp_processor_id()) - return; - *(char *)led = 0; - if ( (led + direction) > (GEMINI_LEDBASE+(7*8)) || - (led + direction) < (GEMINI_LEDBASE+(4*8)) ) - direction *= -1; - led += direction; - *(char *)led = 0xff; - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void __init gemini_setup_arch(void) -{ - extern char cmd_line[]; - - - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* bootable off CDROM */ - if (initrd_start) - ROOT_DEV = Root_SR0; - else -#endif - ROOT_DEV = Root_SDA1; - - /* nothing but serial consoles... */ - sprintf(cmd_line, "%s console=ttyS0", cmd_line); - - printk("Boot arguments: %s\n", cmd_line); - - ppc_md.heartbeat = gemini_heartbeat; - ppc_md.heartbeat_reset = HZ/8; - ppc_md.heartbeat_count = 1; - - /* Lookup PCI hosts */ - gemini_find_bridges(); - /* take special pains to map the MPIC, since it isn't mapped yet */ - gemini_openpic_init(); - /* start the L2 */ - gemini_init_l2(); -} - - -int -gemini_get_clock_speed(void) -{ - unsigned long hid1, pvr; - int clock; - - pvr = mfspr(SPRN_PVR); - hid1 = (mfspr(SPRN_HID1) >> 28) & 0xf; - if (PVR_VER(pvr) == 8 || - PVR_VER(pvr) == 12) - hid1 = cpu_7xx[hid1]; - else - hid1 = cpu_6xx[hid1]; - - switch((readb(GEMINI_BSTAT) & 0xc) >> 2) { - - case 0: - default: - clock = (hid1*100)/3; - break; - - case 1: - clock = (hid1*125)/3; - break; - - case 2: - clock = (hid1*50); - break; - } - - return clock; -} - -void __init gemini_init_l2(void) -{ - unsigned char reg, brev, fam, creg; - unsigned long cache; - unsigned long pvr; - - reg = readb(GEMINI_L2CFG); - brev = readb(GEMINI_BREV); - fam = readb(GEMINI_FEAT); - pvr = mfspr(SPRN_PVR); - - switch(PVR_VER(pvr)) { - - case 8: - if (reg & 0xc0) - cache = (((reg >> 6) & 0x3) << 28); - else - cache = 0x3 << 28; - -#ifdef CONFIG_SMP - /* Pre-3.0 processor revs had snooping errata. Leave - their L2's disabled with SMP. -- Dan */ - if (PVR_CFG(pvr) < 3) { - printk("Pre-3.0 750; L2 left disabled!\n"); - return; - } -#endif /* CONFIG_SMP */ - - /* Special case: VGM5-B's came before L2 ratios were set on - the board. Processor speed shouldn't be too high, so - set L2 ratio to 1:1.5. */ - if ((brev == 0x51) && ((fam & 0xa0) >> 4) == 0) - reg |= 1; - - /* determine best cache ratio based upon what the board - tells us (which sometimes _may_ not be true) and - the processor speed. */ - else { - if (gemini_get_clock_speed() > 250) - reg = 2; - } - break; - case 12: - { - static unsigned long l2_size_val = 0; - - if (!l2_size_val) - l2_size_val = _get_L2CR(); - cache = l2_size_val; - break; - } - case 4: - case 9: - creg = readb(GEMINI_CPUSTAT); - if (((creg & 0xc) >> 2) != 1) - printk("Dual-604 boards don't support the use of L2\n"); - else - writeb(1, GEMINI_L2CFG); - return; - default: - printk("Unknown processor; L2 left disabled\n"); - return; - } - - cache |= ((1<<reg) << 25); - cache |= (L2CR_L2RAM_MASK|L2CR_L2CTL|L2CR_L2DO); - _set_L2CR(0); - _set_L2CR(cache | L2CR_L2E); - -} - -void -gemini_restart(char *cmd) -{ - local_irq_disable(); - /* make a clean restart, not via the MPIC */ - _gemini_reboot(); - for(;;); -} - -void -gemini_power_off(void) -{ - for(;;); -} - -void -gemini_halt(void) -{ - gemini_restart(NULL); -} - -void __init gemini_init_IRQ(void) -{ - /* gemini has no 8259 */ - openpic_init(1, 0, 0, -1); -} - -#define gemini_rtc_read(x) (readb(GEMINI_RTC+(x))) -#define gemini_rtc_write(val,x) (writeb((val),(GEMINI_RTC+(x)))) - -/* ensure that the RTC is up and running */ -long __init gemini_time_init(void) -{ - unsigned char reg; - - reg = gemini_rtc_read(M48T35_RTC_CONTROL); - - if ( reg & M48T35_RTC_STOPPED ) { - printk(KERN_INFO "M48T35 real-time-clock was stopped. Now starting...\n"); - gemini_rtc_write((reg & ~(M48T35_RTC_STOPPED)), M48T35_RTC_CONTROL); - gemini_rtc_write((reg | M48T35_RTC_SET), M48T35_RTC_CONTROL); - } - return 0; -} - -#undef DEBUG_RTC - -unsigned long -gemini_get_rtc_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - unsigned char reg; - - reg = gemini_rtc_read(M48T35_RTC_CONTROL); - gemini_rtc_write((reg|M48T35_RTC_READ), M48T35_RTC_CONTROL); -#ifdef DEBUG_RTC - printk("get rtc: reg = %x\n", reg); -#endif - - do { - sec = gemini_rtc_read(M48T35_RTC_SECONDS); - min = gemini_rtc_read(M48T35_RTC_MINUTES); - hour = gemini_rtc_read(M48T35_RTC_HOURS); - day = gemini_rtc_read(M48T35_RTC_DOM); - mon = gemini_rtc_read(M48T35_RTC_MONTH); - year = gemini_rtc_read(M48T35_RTC_YEAR); - } while( sec != gemini_rtc_read(M48T35_RTC_SECONDS)); -#ifdef DEBUG_RTC - printk("get rtc: sec=%x, min=%x, hour=%x, day=%x, mon=%x, year=%x\n", - sec, min, hour, day, mon, year); -#endif - - gemini_rtc_write(reg, M48T35_RTC_CONTROL); - - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - - if ((year += 1900) < 1970) - year += 100; -#ifdef DEBUG_RTC - printk("get rtc: sec=%x, min=%x, hour=%x, day=%x, mon=%x, year=%x\n", - sec, min, hour, day, mon, year); -#endif - - return mktime( year, mon, day, hour, min, sec ); -} - - -int -gemini_set_rtc_time( unsigned long now ) -{ - unsigned char reg; - struct rtc_time tm; - - to_tm( now, &tm ); - - reg = gemini_rtc_read(M48T35_RTC_CONTROL); -#ifdef DEBUG_RTC - printk("set rtc: reg = %x\n", reg); -#endif - - gemini_rtc_write((reg|M48T35_RTC_SET), M48T35_RTC_CONTROL); -#ifdef DEBUG_RTC - printk("set rtc: tm vals - sec=%x, min=%x, hour=%x, mon=%x, mday=%x, year=%x\n", - tm.tm_sec, tm.tm_min, tm.tm_hour, tm.tm_mon, tm.tm_mday, tm.tm_year); -#endif - - tm.tm_year -= 1900; - BIN_TO_BCD(tm.tm_sec); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_mon); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_year); -#ifdef DEBUG_RTC - printk("set rtc: tm vals - sec=%x, min=%x, hour=%x, mon=%x, mday=%x, year=%x\n", - tm.tm_sec, tm.tm_min, tm.tm_hour, tm.tm_mon, tm.tm_mday, tm.tm_year); -#endif - - gemini_rtc_write(tm.tm_sec, M48T35_RTC_SECONDS); - gemini_rtc_write(tm.tm_min, M48T35_RTC_MINUTES); - gemini_rtc_write(tm.tm_hour, M48T35_RTC_HOURS); - gemini_rtc_write(tm.tm_mday, M48T35_RTC_DOM); - gemini_rtc_write(tm.tm_mon, M48T35_RTC_MONTH); - gemini_rtc_write(tm.tm_year, M48T35_RTC_YEAR); - - /* done writing */ - gemini_rtc_write(reg, M48T35_RTC_CONTROL); - - return 0; -} - -/* use the RTC to determine the decrementer count */ -void __init gemini_calibrate_decr(void) -{ - int freq, divisor; - unsigned char reg; - - /* determine processor bus speed */ - reg = readb(GEMINI_BSTAT); - - switch(((reg & 0x0c)>>2)&0x3) { - case 0: - default: - freq = 66667; - break; - case 1: - freq = 83000; - break; - case 2: - freq = 100000; - break; - } - - freq *= 1000; - divisor = 4; - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); -} - -unsigned long __init gemini_find_end_of_memory(void) -{ - unsigned long total; - unsigned char reg; - - reg = readb(GEMINI_MEMCFG); - total = ((1<<((reg & 0x7) - 1)) * - (8<<((reg >> 3) & 0x7))); - total *= (1024*1024); - return total; -} - -static void __init -gemini_map_io(void) -{ - io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO); - io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO); -} - -#ifdef CONFIG_SMP -static int -smp_gemini_probe(void) -{ - int i, nr; - - nr = (readb(GEMINI_CPUSTAT) & GEMINI_CPU_COUNT_MASK) >> 2; - if (nr == 0) - nr = 4; - - if (nr > 1) { - openpic_request_IPIs(); - for (i = 1; i < nr; ++i) - smp_hw_index[i] = i; - } - - return nr; -} - -static void -smp_gemini_kick_cpu(int nr) -{ - openpic_reset_processor_phys(1 << nr); - openpic_reset_processor_phys(0); -} - -static void -smp_gemini_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); - if (cpu_nr > 0) - gemini_init_l2(); -} - -static struct smp_ops_t gemini_smp_ops = { - smp_openpic_message_pass, - smp_gemini_probe, - smp_gemini_kick_cpu, - smp_gemini_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, -}; -#endif /* CONFIG_SMP */ - -void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - int i; - - /* Restore BATs for now */ - mtspr(SPRN_DBAT3U, 0xf0001fff); - mtspr(SPRN_DBAT3L, 0xf000002a); - - parse_bootinfo(find_bootinfo()); - - for(i = 0; i < GEMINI_LEDS; i++) - gemini_led_off(i); - - ISA_DMA_THRESHOLD = 0; - DMA_MODE_READ = 0; - DMA_MODE_WRITE = 0; - -#ifdef CONFIG_BLK_DEV_INITRD - if ( r4 ) - { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif - - ppc_md.setup_arch = gemini_setup_arch; - ppc_md.show_cpuinfo = gemini_show_cpuinfo; - ppc_md.init_IRQ = gemini_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - ppc_md.init = NULL; - - ppc_md.restart = gemini_restart; - ppc_md.power_off = gemini_power_off; - ppc_md.halt = gemini_halt; - - ppc_md.time_init = gemini_time_init; - ppc_md.set_rtc_time = gemini_set_rtc_time; - ppc_md.get_rtc_time = gemini_get_rtc_time; - ppc_md.calibrate_decr = gemini_calibrate_decr; - - ppc_md.find_end_of_memory = gemini_find_end_of_memory; - ppc_md.setup_io_mappings = gemini_map_io; - - ppc_md.pcibios_fixup_bus = gemini_pcibios_fixup; - -#ifdef CONFIG_SMP - smp_ops = &gemini_smp_ops; -#endif /* CONFIG_SMP */ -} diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index 8a0c07eb4449..5b05d4bd0df7 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -369,7 +369,7 @@ int __init mpc866ads_init(void) ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); #endif -#ifdef CONFIG_SERIAL_CPM_SMC +#ifdef CONFIG_SERIAL_CPM_SMC2 ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dca23f2ef851..d84f04666972 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o -obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 5475709ce07b..ebb8c8f8f30c 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -105,7 +105,8 @@ void idma_pci9_init(void) idma_reg[IDMA_CHAN].idmr = 0; /* mask all IDMA interrupts */ idma_reg[IDMA_CHAN].idsr = 0xff; /* clear all event flags */ - printk("<4>Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n", + printk(KERN_WARNING + "Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n", IDMA_CHAN + 1); return; diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index d8d299bd1a12..01e48d88f22d 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -77,7 +77,7 @@ static struct mtd_partition mpc8xxads_partitions[] = { } }; -#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0])) +#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions) #endif diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c index 05b0e9415085..2b097800cdd9 100644 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -59,8 +59,6 @@ #define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) #define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) -#define is_power_of_2(x) (((x) & ((x) - 1)) == 0) - struct rio_atmu_regs { u32 rowtar; u32 pad1; diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c index 533a6c9973d4..034313cef6e7 100644 --- a/arch/ppc/xmon/ppc-opc.c +++ b/arch/ppc/xmon/ppc-opc.c @@ -19,6 +19,7 @@ along with this file; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/posix_types.h> +#include <linux/kernel.h> #include "ansidecl.h" #include "ppc.h" @@ -2669,8 +2670,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { }; -const int powerpc_num_opcodes = - sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]); +const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes); /* The macro table. This is only used by the assembler. */ @@ -2717,5 +2717,4 @@ const struct powerpc_macro powerpc_macros[] = { }; -const int powerpc_num_macros = - sizeof (powerpc_macros) / sizeof (powerpc_macros[0]); +const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros); diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index d74a883e5bde..8f0b953179fa 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -58,10 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#if defined(CONFIG_GEMINI) - /* should already be mapped by the kernel boot */ - sccd = (volatile unsigned char *) 0xffeffb08; -#elif defined(CONFIG_405GP) +#if defined(CONFIG_405GP) sccd = (volatile unsigned char *)0xef600300; #elif defined(CONFIG_440EP) sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8); |