diff options
Diffstat (limited to 'arch/ppc/syslib/qspan_pci.c')
| -rw-r--r-- | arch/ppc/syslib/qspan_pci.c | 380 |
1 files changed, 0 insertions, 380 deletions
diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c deleted file mode 100644 index 7a97c7440b30..000000000000 --- a/arch/ppc/syslib/qspan_pci.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * QSpan pci routines. - * Most 8xx boards use the QSpan PCI bridge. The config address register - * is located 0x500 from the base of the bridge control/status registers. - * The data register is located at 0x504. - * This is a two step operation. First, the address register is written, - * then the data register is read/written as required. - * I don't know what to do about interrupts (yet). - * - * The RPX Classic implementation shares a chip select for normal - * PCI access and QSpan control register addresses. The selection is - * further selected by a bit setting in a board control register. - * Although it should happen, we disable interrupts during this operation - * to make sure some driver doesn't accidentally access the PCI while - * we have switched the chip select. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/mpc8xx.h> -#include <asm/system.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> - - -/* - * This blows...... - * When reading the configuration space, if something does not respond - * the bus times out and we get a machine check interrupt. So, the - * good ol' exception tables come to mind to trap it and return some - * value. - * - * On an error we just return a -1, since that is what the caller wants - * returned if nothing is present. I copied this from __get_user_asm, - * with the only difference of returning -1 instead of EFAULT. - * There is an associated hack in the machine check trap code. - * - * The QSPAN is also a big endian device, that is it makes the PCI - * look big endian to us. This presents a problem for the Linux PCI - * functions, which assume little endian. For example, we see the - * first 32-bit word like this: - * ------------------------ - * | Device ID | Vendor ID | - * ------------------------ - * If we read/write as a double word, that's OK. But in our world, - * when read as a word, device ID is at location 0, not location 2 as - * the little endian PCI would believe. We have to switch bits in - * the PCI addresses given to us to get the data to/from the correct - * byte lanes. - * - * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5. - * It always forces the MS bit to zero. Therefore, dev_fn values - * greater than 128 are returned as "no device found" errors. - * - * The QSPAN can only perform long word (32-bit) configuration cycles. - * The "offset" must have the two LS bits set to zero. Read operations - * require we read the entire word and then sort out what should be - * returned. Write operations other than long word require that we - * read the long word, update the proper word or byte, then write the - * entire long word back. - * - * PCI Bridge hack. We assume (correctly) that bus 0 is the primary - * PCI bus from the QSPAN. If we are called with a bus number other - * than zero, we create a Type 1 configuration access that a downstream - * PCI bridge will interpret. - */ - -#define __get_qspan_pci_config(x, addr, op) \ - __asm__ __volatile__( \ - "1: "op" %0,0(%1)\n" \ - " eieio\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r"(x) : "r"(addr) : " %0") - -#define QS_CONFIG_ADDR ((volatile uint *)(PCI_CSR_ADDR + 0x500)) -#define QS_CONFIG_DATA ((volatile uint *)(PCI_CSR_ADDR + 0x504)) - -#define mk_config_addr(bus, dev, offset) \ - (((bus)<<16) | ((dev)<<8) | (offset & 0xfc)) - -#define mk_config_type1(bus, dev, offset) \ - mk_config_addr(bus, dev, offset) | 1; - -static DEFINE_SPINLOCK(pcibios_lock); - -int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val) -{ - uint temp; - u_char *cp; -#ifdef CONFIG_RPXCLASSIC - unsigned long flags; -#endif - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - -#ifdef CONFIG_RPXCLASSIC - /* disable interrupts */ - spin_lock_irqsave(&pcibios_lock, flags); - *((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL; - eieio(); -#endif - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz"); - -#ifdef CONFIG_RPXCLASSIC - *((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL; - eieio(); - spin_unlock_irqrestore(&pcibios_lock, flags); -#endif - - offset ^= 0x03; - cp = ((u_char *)&temp) + (offset & 0x03); - *val = *cp; - return PCIBIOS_SUCCESSFUL; -} - -int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val) -{ - uint temp; - ushort *sp; -#ifdef CONFIG_RPXCLASSIC - unsigned long flags; -#endif - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - -#ifdef CONFIG_RPXCLASSIC - /* disable interrupts */ - spin_lock_irqsave(&pcibios_lock, flags); - *((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL; - eieio(); -#endif - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz"); - offset ^= 0x02; - -#ifdef CONFIG_RPXCLASSIC - *((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL; - eieio(); - spin_unlock_irqrestore(&pcibios_lock, flags); -#endif - - sp = ((ushort *)&temp) + ((offset >> 1) & 1); - *val = *sp; - return PCIBIOS_SUCCESSFUL; -} - -int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val) -{ -#ifdef CONFIG_RPXCLASSIC - unsigned long flags; -#endif - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - -#ifdef CONFIG_RPXCLASSIC - /* disable interrupts */ - spin_lock_irqsave(&pcibios_lock, flags); - *((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL; - eieio(); -#endif - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz"); - -#ifdef CONFIG_RPXCLASSIC - *((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL; - eieio(); - spin_unlock_irqrestore(&pcibios_lock, flags); -#endif - - return PCIBIOS_SUCCESSFUL; -} - -int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val) -{ - uint temp; - u_char *cp; -#ifdef CONFIG_RPXCLASSIC - unsigned long flags; -#endif - - if ((bus > 7) || (dev_fn > 127)) - return PCIBIOS_DEVICE_NOT_FOUND; - - qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp); - - offset ^= 0x03; - cp = ((u_char *)&temp) + (offset & 0x03); - *cp = val; - -#ifdef CONFIG_RPXCLASSIC - /* disable interrupts */ - spin_lock_irqsave(&pcibios_lock, flags); - *((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL; - eieio(); -#endif - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *QS_CONFIG_DATA = temp; - -#ifdef CONFIG_RPXCLASSIC - *((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL; - eieio(); - spin_unlock_irqrestore(&pcibios_lock, flags); -#endif - - return PCIBIOS_SUCCESSFUL; -} - -int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val) -{ - uint temp; - ushort *sp; -#ifdef CONFIG_RPXCLASSIC - unsigned long flags; -#endif - - if ((bus > 7) || (dev_fn > 127)) - return PCIBIOS_DEVICE_NOT_FOUND; - - qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp); - - offset ^= 0x02; - sp = ((ushort *)&temp) + ((offset >> 1) & 1); - *sp = val; - -#ifdef CONFIG_RPXCLASSIC - /* disable interrupts */ - spin_lock_irqsave(&pcibios_lock, flags); - *((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL; - eieio(); -#endif - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *QS_CONFIG_DATA = temp; - -#ifdef CONFIG_RPXCLASSIC - *((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL; - eieio(); - spin_unlock_irqrestore(&pcibios_lock, flags); -#endif - - return PCIBIOS_SUCCESSFUL; -} - -int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val) -{ -#ifdef CONFIG_RPXCLASSIC - unsigned long flags; -#endif - - if ((bus > 7) || (dev_fn > 127)) - return PCIBIOS_DEVICE_NOT_FOUND; - -#ifdef CONFIG_RPXCLASSIC - /* disable interrupts */ - spin_lock_irqsave(&pcibios_lock, flags); - *((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL; - eieio(); -#endif - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *(unsigned int *)QS_CONFIG_DATA = val; - -#ifdef CONFIG_RPXCLASSIC - *((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL; - eieio(); - spin_unlock_irqrestore(&pcibios_lock, flags); -#endif - - return PCIBIOS_SUCCESSFUL; -} - -int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id, - unsigned short index, unsigned char *bus_ptr, - unsigned char *dev_fn_ptr) -{ - int num, devfn; - unsigned int x, vendev; - - if (vendor == 0xffff) - return PCIBIOS_BAD_VENDOR_ID; - vendev = (dev_id << 16) + vendor; - num = 0; - for (devfn = 0; devfn < 32; devfn++) { - qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x); - if (x == vendev) { - if (index == num) { - *bus_ptr = 0; - *dev_fn_ptr = devfn<<3; - return PCIBIOS_SUCCESSFUL; - } - ++num; - } - } - return PCIBIOS_DEVICE_NOT_FOUND; -} - -int qspan_pcibios_find_class(unsigned int class_code, unsigned short index, - unsigned char *bus_ptr, unsigned char *dev_fn_ptr) -{ - int devnr, x, num; - - num = 0; - for (devnr = 0; devnr < 32; devnr++) { - qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x); - if ((x>>8) == class_code) { - if (index == num) { - *bus_ptr = 0; - *dev_fn_ptr = devnr<<3; - return PCIBIOS_SUCCESSFUL; - } - ++num; - } - } - return PCIBIOS_DEVICE_NOT_FOUND; -} - -void __init -m8xx_pcibios_fixup(void) -{ - /* Lots to do here, all board and configuration specific. */ -} - -void __init -m8xx_setup_pci_ptrs(void) -{ - set_config_access_method(qspan); - - ppc_md.pcibios_fixup = m8xx_pcibios_fixup; -} - |