diff options
Diffstat (limited to 'arch/ppc/platforms/prep_pci.c')
| -rw-r--r-- | arch/ppc/platforms/prep_pci.c | 1339 |
1 files changed, 0 insertions, 1339 deletions
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c deleted file mode 100644 index 8ed433e2a5c7..000000000000 --- a/arch/ppc/platforms/prep_pci.c +++ /dev/null @@ -1,1339 +0,0 @@ -/* - * PReP pci functions. - * Originally by Gary Thomas - * rewritten and updated by Cort Dougan (cort@cs.nmt.edu) - * - * The motherboard routes/maps will disappear shortly. -- Cort - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/sections.h> -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/ptrace.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/residual.h> -#include <asm/irq.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> - -extern void (*setup_ibm_pci)(char *irq_lo, char *irq_hi); - -/* Which PCI interrupt line does a given device [slot] use? */ -/* Note: This really should be two dimensional based in slot/pin used */ -static unsigned char *Motherboard_map; -unsigned char *Motherboard_map_name; - -/* How is the 82378 PIRQ mapping setup? */ -static unsigned char *Motherboard_routes; - -static void (*Motherboard_non0)(struct pci_dev *); - -static void Powerplus_Map_Non0(struct pci_dev *); - -/* Used for Motorola to store system config register */ -static unsigned long *ProcInfo; - -/* Tables for known hardware */ - -/* Motorola PowerStackII - Utah */ -static char Utah_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 5, /* Slot 2 - SCSI - NCR825A */ - 0, /* Slot 3 - unused */ - 3, /* Slot 4 - Ethernet - DEC2114x */ - 0, /* Slot 5 - unused */ - 2, /* Slot 6 - PCI Card slot #1 */ - 3, /* Slot 7 - PCI Card slot #2 */ - 5, /* Slot 8 - PCI Card slot #3 */ - 5, /* Slot 9 - PCI Bridge */ - /* added here in case we ever support PCI bridges */ - /* Secondary PCI bus cards are at slot-9,6 & slot-9,7 */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 5, /* Slot 12 - SCSI - NCR825A */ - 0, /* Slot 13 - unused */ - 3, /* Slot 14 - enet */ - 0, /* Slot 15 - unused */ - 2, /* Slot 16 - unused */ - 3, /* Slot 17 - unused */ - 5, /* Slot 18 - unused */ - 0, /* Slot 19 - unused */ - 0, /* Slot 20 - unused */ - 0, /* Slot 21 - unused */ - 0, /* Slot 22 - unused */ -}; - -static char Utah_pci_IRQ_routes[] = -{ - 0, /* Line 0 - Unused */ - 9, /* Line 1 */ - 10, /* Line 2 */ - 11, /* Line 3 */ - 14, /* Line 4 */ - 15, /* Line 5 */ -}; - -/* Motorola PowerStackII - Omaha */ -/* no integrated SCSI or ethernet */ -static char Omaha_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 3, /* Slot 2 - Winbond EIDE */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 1, /* Slot 6 - PCI slot 1 */ - 2, /* Slot 7 - PCI slot 2 */ - 3, /* Slot 8 - PCI slot 3 */ - 4, /* Slot 9 - PCI slot 4 */ /* needs indirect access */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 0, /* Slot 12 - unused */ - 0, /* Slot 13 - unused */ - 0, /* Slot 14 - unused */ - 0, /* Slot 15 - unused */ - 1, /* Slot 16 - PCI slot 1 */ - 2, /* Slot 17 - PCI slot 2 */ - 3, /* Slot 18 - PCI slot 3 */ - 4, /* Slot 19 - PCI slot 4 */ /* needs indirect access */ - 0, - 0, - 0, -}; - -static char Omaha_pci_IRQ_routes[] = -{ - 0, /* Line 0 - Unused */ - 9, /* Line 1 */ - 11, /* Line 2 */ - 14, /* Line 3 */ - 15 /* Line 4 */ -}; - -/* Motorola PowerStack */ -static char Blackhawk_pci_IRQ_map[19] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI */ - 0, /* Slot 13 - unused */ - 1, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ - 1, /* Slot P7 */ - 2, /* Slot P6 */ - 3, /* Slot P5 */ -}; - -static char Blackhawk_pci_IRQ_routes[] = -{ - 0, /* Line 0 - Unused */ - 9, /* Line 1 */ - 11, /* Line 2 */ - 15, /* Line 3 */ - 15 /* Line 4 */ -}; - -/* Motorola Mesquite */ -static char Mesquite_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 0, /* Slot 12 - unused */ - 0, /* Slot 13 - unused */ - 2, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ - 3, /* Slot 16 - PMC */ - 0, /* Slot 17 - unused */ - 0, /* Slot 18 - unused */ - 0, /* Slot 19 - unused */ - 0, /* Slot 20 - unused */ - 0, /* Slot 21 - unused */ - 0, /* Slot 22 - unused */ -}; - -/* Motorola Sitka */ -static char Sitka_pci_IRQ_map[21] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 0, /* Slot 12 - unused */ - 0, /* Slot 13 - unused */ - 2, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ - 9, /* Slot 16 - PMC 1 */ - 12, /* Slot 17 - PMC 2 */ - 0, /* Slot 18 - unused */ - 0, /* Slot 19 - unused */ - 4, /* Slot 20 - NT P2P bridge */ -}; - -/* Motorola MTX */ -static char MTX_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI */ - 0, /* Slot 13 - unused */ - 2, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ - 9, /* Slot 16 - PCI/PMC slot 1 */ - 10, /* Slot 17 - PCI/PMC slot 2 */ - 11, /* Slot 18 - PCI slot 3 */ - 0, /* Slot 19 - unused */ - 0, /* Slot 20 - unused */ - 0, /* Slot 21 - unused */ - 0, /* Slot 22 - unused */ -}; - -/* Motorola MTX Plus */ -/* Secondary bus interrupt routing is not supported yet */ -static char MTXplus_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI */ - 0, /* Slot 13 - unused */ - 2, /* Slot 14 - Ethernet 1 */ - 0, /* Slot 15 - unused */ - 9, /* Slot 16 - PCI slot 1P */ - 10, /* Slot 17 - PCI slot 2P */ - 11, /* Slot 18 - PCI slot 3P */ - 10, /* Slot 19 - Ethernet 2 */ - 0, /* Slot 20 - P2P Bridge */ - 0, /* Slot 21 - unused */ - 0, /* Slot 22 - unused */ -}; - -static char Raven_pci_IRQ_routes[] = -{ - 0, /* This is a dummy structure */ -}; - -/* Motorola MVME16xx */ -static char Genesis_pci_IRQ_map[16] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI */ - 0, /* Slot 13 - unused */ - 1, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ -}; - -static char Genesis_pci_IRQ_routes[] = -{ - 0, /* Line 0 - Unused */ - 10, /* Line 1 */ - 11, /* Line 2 */ - 14, /* Line 3 */ - 15 /* Line 4 */ -}; - -static char Genesis2_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - IDE */ - 3, /* Slot 12 - SCSI */ - 5, /* Slot 13 - Universe PCI - VME Bridge */ - 2, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ - 9, /* Slot 16 - PMC 1 */ - 12, /* Slot 17 - pci */ - 11, /* Slot 18 - pci */ - 10, /* Slot 19 - pci */ - 0, /* Slot 20 - pci */ - 0, /* Slot 21 - unused */ - 0, /* Slot 22 - unused */ -}; - -/* Motorola Series-E */ -static char Comet_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI */ - 0, /* Slot 13 - unused */ - 1, /* Slot 14 - Ethernet */ - 0, /* Slot 15 - unused */ - 1, /* Slot 16 - PCI slot 1 */ - 2, /* Slot 17 - PCI slot 2 */ - 3, /* Slot 18 - PCI slot 3 */ - 4, /* Slot 19 - PCI bridge */ - 0, - 0, - 0, -}; - -static char Comet_pci_IRQ_routes[] = -{ - 0, /* Line 0 - Unused */ - 10, /* Line 1 */ - 11, /* Line 2 */ - 14, /* Line 3 */ - 15 /* Line 4 */ -}; - -/* Motorola Series-EX */ -static char Comet2_pci_IRQ_map[23] = -{ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 3, /* Slot 2 - SCSI - NCR825A */ - 0, /* Slot 3 - unused */ - 1, /* Slot 4 - Ethernet - DEC2104X */ - 0, /* Slot 5 - unused */ - 1, /* Slot 6 - PCI slot 1 */ - 2, /* Slot 7 - PCI slot 2 */ - 3, /* Slot 8 - PCI slot 3 */ - 4, /* Slot 9 - PCI bridge */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI - NCR825A */ - 0, /* Slot 13 - unused */ - 1, /* Slot 14 - Ethernet - DEC2104X */ - 0, /* Slot 15 - unused */ - 1, /* Slot 16 - PCI slot 1 */ - 2, /* Slot 17 - PCI slot 2 */ - 3, /* Slot 18 - PCI slot 3 */ - 4, /* Slot 19 - PCI bridge */ - 0, - 0, - 0, -}; - -static char Comet2_pci_IRQ_routes[] = -{ - 0, /* Line 0 - Unused */ - 10, /* Line 1 */ - 11, /* Line 2 */ - 14, /* Line 3 */ - 15, /* Line 4 */ -}; - -/* - * ibm 830 (and 850?). - * This is actually based on the Carolina motherboard - * -- Cort - */ -static char ibm8xx_pci_IRQ_map[23] = { - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - FireCoral */ - 4, /* Slot 12 - Ethernet PCIINTD# */ - 2, /* Slot 13 - PCI Slot #2 */ - 2, /* Slot 14 - S3 Video PCIINTD# */ - 0, /* Slot 15 - onboard SCSI (INDI) [1] */ - 3, /* Slot 16 - NCR58C810 RS6000 Only PCIINTC# */ - 0, /* Slot 17 - unused */ - 2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */ - 0, /* Slot 19 - unused */ - 0, /* Slot 20 - unused */ - 0, /* Slot 21 - unused */ - 2, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */ -}; - -static char ibm8xx_pci_IRQ_routes[] = { - 0, /* Line 0 - unused */ - 15, /* Line 1 */ - 15, /* Line 2 */ - 15, /* Line 3 */ - 15, /* Line 4 */ -}; - -/* - * a 6015 ibm board - * -- Cort - */ -static char ibm6015_pci_IRQ_map[23] = { - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - */ - 1, /* Slot 12 - SCSI */ - 2, /* Slot 13 - */ - 2, /* Slot 14 - */ - 1, /* Slot 15 - */ - 1, /* Slot 16 - */ - 0, /* Slot 17 - */ - 2, /* Slot 18 - */ - 0, /* Slot 19 - */ - 0, /* Slot 20 - */ - 0, /* Slot 21 - */ - 2, /* Slot 22 - */ -}; - -static char ibm6015_pci_IRQ_routes[] = { - 0, /* Line 0 - unused */ - 13, /* Line 1 */ - 15, /* Line 2 */ - 15, /* Line 3 */ - 15, /* Line 4 */ -}; - - -/* IBM Nobis and Thinkpad 850 */ -static char Nobis_pci_IRQ_map[23] ={ - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - unused */ - 3, /* Slot 12 - SCSI */ - 0, /* Slot 13 - unused */ - 0, /* Slot 14 - unused */ - 0, /* Slot 15 - unused */ -}; - -static char Nobis_pci_IRQ_routes[] = { - 0, /* Line 0 - Unused */ - 13, /* Line 1 */ - 13, /* Line 2 */ - 13, /* Line 3 */ - 13 /* Line 4 */ -}; - -/* - * IBM RS/6000 43p/140 -- paulus - * XXX we should get all this from the residual data - */ -static char ibm43p_pci_IRQ_map[23] = { - 0, /* Slot 0 - unused */ - 0, /* Slot 1 - unused */ - 0, /* Slot 2 - unused */ - 0, /* Slot 3 - unused */ - 0, /* Slot 4 - unused */ - 0, /* Slot 5 - unused */ - 0, /* Slot 6 - unused */ - 0, /* Slot 7 - unused */ - 0, /* Slot 8 - unused */ - 0, /* Slot 9 - unused */ - 0, /* Slot 10 - unused */ - 0, /* Slot 11 - FireCoral ISA bridge */ - 6, /* Slot 12 - Ethernet */ - 0, /* Slot 13 - openpic */ - 0, /* Slot 14 - unused */ - 0, /* Slot 15 - unused */ - 7, /* Slot 16 - NCR58C825a onboard scsi */ - 0, /* Slot 17 - unused */ - 2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */ - 0, /* Slot 19 - unused */ - 0, /* Slot 20 - unused */ - 0, /* Slot 21 - unused */ - 1, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */ -}; - -static char ibm43p_pci_IRQ_routes[] = { - 0, /* Line 0 - unused */ - 15, /* Line 1 */ - 15, /* Line 2 */ - 15, /* Line 3 */ - 15, /* Line 4 */ -}; - -/* Motorola PowerPlus architecture PCI IRQ tables */ -/* Interrupt line values for INTA-D on primary/secondary MPIC inputs */ - -struct powerplus_irq_list -{ - unsigned char primary[4]; /* INT A-D */ - unsigned char secondary[4]; /* INT A-D */ -}; - -/* - * For standard PowerPlus boards, bus 0 PCI INTs A-D are routed to - * OpenPIC inputs 9-12. PCI INTs A-D from the on board P2P bridge - * are routed to OpenPIC inputs 5-8. These values are offset by - * 16 in the table to reflect the Linux kernel interrupt value. - */ -struct powerplus_irq_list Powerplus_pci_IRQ_list = -{ - {25, 26, 27, 28}, - {21, 22, 23, 24} -}; - -/* - * For the MCP750 (system slot board), cPCI INTs A-D are routed to - * OpenPIC inputs 8-11 and the PMC INTs A-D are routed to OpenPIC - * input 3. On a hot swap MCP750, the companion card PCI INTs A-D - * are routed to OpenPIC inputs 12-15. These values are offset by - * 16 in the table to reflect the Linux kernel interrupt value. - */ -struct powerplus_irq_list Mesquite_pci_IRQ_list = -{ - {24, 25, 26, 27}, - {28, 29, 30, 31} -}; - -/* - * This table represents the standard PCI swizzle defined in the - * PCI bus specification. - */ -static unsigned char prep_pci_intpins[4][4] = -{ - { 1, 2, 3, 4}, /* Buses 0, 4, 8, ... */ - { 2, 3, 4, 1}, /* Buses 1, 5, 9, ... */ - { 3, 4, 1, 2}, /* Buses 2, 6, 10 ... */ - { 4, 1, 2, 3}, /* Buses 3, 7, 11 ... */ -}; - -/* We have to turn on LEVEL mode for changed IRQs */ -/* All PCI IRQs need to be level mode, so this should be something - * other than hard-coded as well... IRQs are individually mappable - * to either edge or level. - */ - -/* - * 8259 edge/level control definitions - */ -#define ISA8259_M_ELCR 0x4d0 -#define ISA8259_S_ELCR 0x4d1 - -#define ELCRS_INT15_LVL 0x80 -#define ELCRS_INT14_LVL 0x40 -#define ELCRS_INT12_LVL 0x10 -#define ELCRS_INT11_LVL 0x08 -#define ELCRS_INT10_LVL 0x04 -#define ELCRS_INT9_LVL 0x02 -#define ELCRS_INT8_LVL 0x01 -#define ELCRM_INT7_LVL 0x80 -#define ELCRM_INT5_LVL 0x20 - -#if 0 -/* - * PCI config space access. - */ -#define CFGADDR(dev) ((1<<(dev>>3)) | ((dev&7)<<8)) -#define DEVNO(dev) (dev>>3) - -#define MIN_DEVNR 11 -#define MAX_DEVNR 22 - -static int -prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = bus->sysdata; - volatile void __iomem *cfg_data; - - if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR - || DEVNO(devfn) > MAX_DEVNR) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + CFGADDR(devfn) + offset; - switch (len) { - case 1: - *val = in_8(cfg_data); - break; - case 2: - *val = in_le16(cfg_data); - break; - default: - *val = in_le32(cfg_data); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int -prep_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - volatile void __iomem *cfg_data; - - if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR - || DEVNO(devfn) > MAX_DEVNR) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + CFGADDR(devfn) + offset; - switch (len) { - case 1: - out_8(cfg_data, val); - break; - case 2: - out_le16(cfg_data, val); - break; - default: - out_le32(cfg_data, val); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops prep_pci_ops = -{ - prep_read_config, - prep_write_config -}; -#endif - -#define MOTOROLA_CPUTYPE_REG 0x800 -#define MOTOROLA_BASETYPE_REG 0x803 -#define MPIC_RAVEN_ID 0x48010000 -#define MPIC_HAWK_ID 0x48030000 -#define MOT_PROC2_BIT 0x800 - -static u_char prep_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_FALCN_ECC_ERR */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_ETHERNET */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_GRAPHICS */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */ -}; - -#define MOT_RAVEN_PRESENT 0x1 -#define MOT_HAWK_PRESENT 0x2 - -int mot_entry = -1; -int prep_keybd_present = 1; -int MotMPIC; -int mot_multi; - -int __init -raven_init(void) -{ - unsigned int devid; - unsigned int pci_membase; - unsigned char base_mod; - - /* Check to see if the Raven chip exists. */ - if ( _prep_type != _PREP_Motorola) { - OpenPIC_Addr = NULL; - return 0; - } - - /* Check to see if this board is a type that might have a Raven. */ - if ((inb(MOTOROLA_CPUTYPE_REG) & 0xF0) != 0xE0) { - OpenPIC_Addr = NULL; - return 0; - } - - /* Check the first PCI device to see if it is a Raven. */ - early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &devid); - - switch (devid & 0xffff0000) { - case MPIC_RAVEN_ID: - MotMPIC = MOT_RAVEN_PRESENT; - break; - case MPIC_HAWK_ID: - MotMPIC = MOT_HAWK_PRESENT; - break; - default: - OpenPIC_Addr = NULL; - return 0; - } - - - /* Read the memory base register. */ - early_read_config_dword(NULL, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); - - if (pci_membase == 0) { - OpenPIC_Addr = NULL; - return 0; - } - - /* Map the Raven MPIC registers to virtual memory. */ - OpenPIC_Addr = ioremap(pci_membase+0xC0000000, 0x22000); - - OpenPIC_InitSenses = prep_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses); - - ppc_md.get_irq = openpic_get_irq; - - /* If raven is present on Motorola store the system config register - * for later use. - */ - ProcInfo = (unsigned long *)ioremap(0xfef80400, 4); - - /* Indicate to system if this is a multiprocessor board */ - if (!(*ProcInfo & MOT_PROC2_BIT)) { - mot_multi = 1; - } - - /* This is a hack. If this is a 2300 or 2400 mot board then there is - * no keyboard controller and we have to indicate that. - */ - base_mod = inb(MOTOROLA_BASETYPE_REG); - if ((MotMPIC == MOT_HAWK_PRESENT) || (base_mod == 0xF9) || - (base_mod == 0xFA) || (base_mod == 0xE1)) - prep_keybd_present = 0; - - return 1; -} - -struct mot_info { - int cpu_type; /* 0x100 mask assumes for Raven and Hawk boards that the level/edge are set */ - /* 0x200 if this board has a Hawk chip. */ - int base_type; - int max_cpu; /* ored with 0x80 if this board should be checked for multi CPU */ - const char *name; - unsigned char *map; - unsigned char *routes; - void (*map_non0_bus)(struct pci_dev *); /* For boards with more than bus 0 devices. */ - struct powerplus_irq_list *pci_irq_list; /* List of PCI MPIC inputs */ - unsigned char secondary_bridge_devfn; /* devfn of secondary bus transparent bridge */ -} mot_info[] = { - {0x300, 0x00, 0x00, "MVME 2400", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x010, 0x00, 0x00, "Genesis", Genesis_pci_IRQ_map, Genesis_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, - {0x020, 0x00, 0x00, "Powerstack (Series E)", Comet_pci_IRQ_map, Comet_pci_IRQ_routes, NULL, NULL, 0x00}, - {0x040, 0x00, 0x00, "Blackhawk (Powerstack)", Blackhawk_pci_IRQ_map, Blackhawk_pci_IRQ_routes, NULL, NULL, 0x00}, - {0x050, 0x00, 0x00, "Omaha (PowerStack II Pro3000)", Omaha_pci_IRQ_map, Omaha_pci_IRQ_routes, NULL, NULL, 0x00}, - {0x060, 0x00, 0x00, "Utah (Powerstack II Pro4000)", Utah_pci_IRQ_map, Utah_pci_IRQ_routes, NULL, NULL, 0x00}, - {0x0A0, 0x00, 0x00, "Powerstack (Series EX)", Comet2_pci_IRQ_map, Comet2_pci_IRQ_routes, NULL, NULL, 0x00}, - {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", Mesquite_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xFF}, - {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", Sitka_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", Mesquite_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xC0}, - {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0}, - {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0}, - {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, - {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, - {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, - {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, - {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, - {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x1E0, 0xFF, 0x00, "MVME 1600-001 or 1600-011", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, - {0x000, 0x00, 0x00, "", NULL, NULL, NULL, NULL, 0x00} -}; - -void __init -ibm_prep_init(void) -{ - if (have_residual_data) { - u32 addr, real_addr, len, offset; - PPC_DEVICE *mpic; - PnP_TAG_PACKET *pkt; - - /* Use the PReP residual data to determine if an OpenPIC is - * present. If so, get the large vendor packet which will - * tell us the base address and length in memory. - * If we are successful, ioremap the memory area and set - * OpenPIC_Addr (this indicates that the OpenPIC was found). - */ - mpic = residual_find_device(-1, NULL, SystemPeripheral, - ProgrammableInterruptController, MPIC, 0); - if (!mpic) - return; - - pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap + - mpic->AllocatedOffset, 9, 0); - - if (!pkt) - return; - -#define p pkt->L4_Pack.L4_Data.L4_PPCPack - if (p.PPCData[1] == 32) { - switch (p.PPCData[0]) { - case 1: offset = PREP_ISA_IO_BASE; break; - case 2: offset = PREP_ISA_MEM_BASE; break; - default: return; /* Not I/O or memory?? */ - } - } - else - return; /* Not a 32-bit address */ - - real_addr = ld_le32((unsigned int *) (p.PPCData + 4)); - if (real_addr == 0xffffffff) - return; - - /* Adjust address to be as seen by CPU */ - addr = real_addr + offset; - - len = ld_le32((unsigned int *) (p.PPCData + 12)); - if (!len) - return; -#undef p - OpenPIC_Addr = ioremap(addr, len); - ppc_md.get_irq = openpic_get_irq; - - OpenPIC_InitSenses = prep_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses); - - printk(KERN_INFO "MPIC at 0x%08x (0x%08x), length 0x%08x " - "mapped to 0x%p\n", addr, real_addr, len, OpenPIC_Addr); - } -} - -static void __init -ibm43p_pci_map_non0(struct pci_dev *dev) -{ - unsigned char intpin; - static unsigned char bridge_intrs[4] = { 3, 4, 5, 8 }; - - if (dev == NULL) - return; - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin); - if (intpin < 1 || intpin > 4) - return; - intpin = (PCI_SLOT(dev->devfn) + intpin - 1) & 3; - dev->irq = openpic_to_irq(bridge_intrs[intpin]); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -} - -void __init -prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) -{ - if (have_residual_data) { - Motherboard_map_name = res->VitalProductData.PrintableModel; - Motherboard_map = NULL; - Motherboard_routes = NULL; - residual_irq_mask(irq_edge_mask_lo, irq_edge_mask_hi); - } -} - -void __init -prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) -{ - Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)"; - Motherboard_map = ibm6015_pci_IRQ_map; - Motherboard_routes = ibm6015_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ -} - -void __init -prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) -{ - Motherboard_map_name = "IBM Thinkpad 850/860"; - Motherboard_map = Nobis_pci_IRQ_map; - Motherboard_routes = Nobis_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ -} - -void __init -prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) -{ - Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)"; - Motherboard_map = ibm8xx_pci_IRQ_map; - Motherboard_routes = ibm8xx_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */ -} - -void __init -prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) -{ - Motherboard_map_name = "IBM 43P-140 (Tiger1)"; - Motherboard_map = ibm43p_pci_IRQ_map; - Motherboard_routes = ibm43p_pci_IRQ_routes; - Motherboard_non0 = ibm43p_pci_map_non0; - *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ -} - -void __init -prep_route_pci_interrupts(void) -{ - unsigned char *ibc_pirq = (unsigned char *)0x80800860; - unsigned char *ibc_pcicon = (unsigned char *)0x80800840; - int i; - - if ( _prep_type == _PREP_Motorola) - { - unsigned short irq_mode; - unsigned char cpu_type; - unsigned char base_mod; - int entry; - - cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0; - base_mod = inb(MOTOROLA_BASETYPE_REG); - - for (entry = 0; mot_info[entry].cpu_type != 0; entry++) { - if (mot_info[entry].cpu_type & 0x200) { /* Check for Hawk chip */ - if (!(MotMPIC & MOT_HAWK_PRESENT)) - continue; - } else { /* Check non hawk boards */ - if ((mot_info[entry].cpu_type & 0xff) != cpu_type) - continue; - - if (mot_info[entry].base_type == 0) { - mot_entry = entry; - break; - } - - if (mot_info[entry].base_type != base_mod) - continue; - } - - if (!(mot_info[entry].max_cpu & 0x80)) { - mot_entry = entry; - break; - } - - /* processor 1 not present and max processor zero indicated */ - if ((*ProcInfo & MOT_PROC2_BIT) && !(mot_info[entry].max_cpu & 0x7f)) { - mot_entry = entry; - break; - } - - /* processor 1 present and max processor zero indicated */ - if (!(*ProcInfo & MOT_PROC2_BIT) && (mot_info[entry].max_cpu & 0x7f)) { - mot_entry = entry; - break; - } - } - - if (mot_entry == -1) /* No particular cpu type found - assume Blackhawk */ - mot_entry = 3; - - Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name; - Motherboard_map = mot_info[mot_entry].map; - Motherboard_routes = mot_info[mot_entry].routes; - Motherboard_non0 = mot_info[mot_entry].map_non0_bus; - - if (!(mot_info[entry].cpu_type & 0x100)) { - /* AJF adjust level/edge control according to routes */ - irq_mode = 0; - for (i = 1; i <= 4; i++) - irq_mode |= ( 1 << Motherboard_routes[i] ); - outb( irq_mode & 0xff, 0x4d0 ); - outb( (irq_mode >> 8) & 0xff, 0x4d1 ); - } - } else if ( _prep_type == _PREP_IBM ) { - unsigned char irq_edge_mask_lo, irq_edge_mask_hi; - unsigned short irq_edge_mask; - int i; - - setup_ibm_pci(&irq_edge_mask_lo, &irq_edge_mask_hi); - - outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */ - outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */ - - irq_edge_mask = (irq_edge_mask_hi << 8) | irq_edge_mask_lo; - for (i = 0; i < 16; ++i, irq_edge_mask >>= 1) - if (irq_edge_mask & 1) - irq_desc[i].status |= IRQ_LEVEL; - } else { - printk("No known machine pci routing!\n"); - return; - } - - /* Set up mapping from slots */ - if (Motherboard_routes) { - for (i = 1; i <= 4; i++) - ibc_pirq[i-1] = Motherboard_routes[i]; - - /* Enable PCI interrupts */ - *ibc_pcicon |= 0x20; - } -} - -void __init -prep_pib_init(void) -{ - unsigned char reg; - unsigned short short_reg; - - struct pci_dev *dev = NULL; - - if (( _prep_type == _PREP_Motorola) && (OpenPIC_Addr)) { - /* - * Perform specific configuration for the Via Tech or - * or Winbond PCI-ISA-Bridge part. - */ - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, dev))) { - /* - * PPCBUG does not set the enable bits - * for the IDE device. Force them on here. - */ - pci_read_config_byte(dev, 0x40, ®); - - reg |= 0x03; /* IDE: Chip Enable Bits */ - pci_write_config_byte(dev, 0x40, reg); - } - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_2, - dev)) && (dev->devfn = 0x5a)) { - /* Force correct USB interrupt */ - dev->irq = 11; - pci_write_config_byte(dev, - PCI_INTERRUPT_LINE, - dev->irq); - } - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_83C553, dev))) { - /* Clear PCI Interrupt Routing Control Register. */ - short_reg = 0x0000; - pci_write_config_word(dev, 0x44, short_reg); - if (OpenPIC_Addr){ - /* Route IDE interrupts to IRQ 14 */ - reg = 0xEE; - pci_write_config_byte(dev, 0x43, reg); - } - } - } - - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_82C105, dev))){ - if (OpenPIC_Addr){ - /* - * Disable LEGIRQ mode so PCI INTS are routed - * directly to the 8259 and enable both channels - */ - pci_write_config_dword(dev, 0x40, 0x10ff0033); - - /* Force correct IDE interrupt */ - dev->irq = 14; - pci_write_config_byte(dev, - PCI_INTERRUPT_LINE, - dev->irq); - } else { - /* Enable LEGIRQ for PCI INT -> 8259 IRQ routing */ - pci_write_config_dword(dev, 0x40, 0x10ff08a1); - } - } - pci_dev_put(dev); -} - -static void __init -Powerplus_Map_Non0(struct pci_dev *dev) -{ - struct pci_bus *pbus; /* Parent bus structure pointer */ - struct pci_dev *tdev = dev; /* Temporary device structure */ - unsigned int devnum; /* Accumulated device number */ - unsigned char intline; /* Linux interrupt value */ - unsigned char intpin; /* PCI interrupt pin */ - - /* Check for valid PCI dev pointer */ - if (dev == NULL) return; - - /* Initialize bridge IDSEL variable */ - devnum = PCI_SLOT(tdev->devfn); - - /* Read the interrupt pin of the device and adjust for indexing */ - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin); - - /* If device doesn't request an interrupt, return */ - if ( (intpin < 1) || (intpin > 4) ) - return; - - intpin--; - - /* - * Walk up to bus 0, adjusting the interrupt pin for the standard - * PCI bus swizzle. - */ - do { - intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1; - pbus = tdev->bus; /* up one level */ - tdev = pbus->self; - devnum = PCI_SLOT(tdev->devfn); - } while(tdev->bus->number); - - /* Use the primary interrupt inputs by default */ - intline = mot_info[mot_entry].pci_irq_list->primary[intpin]; - - /* - * If the board has secondary interrupt inputs, walk the bus and - * note the devfn of the bridge from bus 0. If it is the same as - * the devfn of the bus bridge with secondary inputs, use those. - * Otherwise, assume it's a PMC site and get the interrupt line - * value from the interrupt routing table. - */ - if (mot_info[mot_entry].secondary_bridge_devfn) { - pbus = dev->bus; - - while (pbus->primary != 0) - pbus = pbus->parent; - - if ((pbus->self)->devfn != 0xA0) { - if ((pbus->self)->devfn == mot_info[mot_entry].secondary_bridge_devfn) - intline = mot_info[mot_entry].pci_irq_list->secondary[intpin]; - else { - if ((char *)(mot_info[mot_entry].map) == (char *)Mesquite_pci_IRQ_map) - intline = mot_info[mot_entry].map[((pbus->self)->devfn)/8] + 16; - else { - int i; - for (i=0;i<3;i++) - intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1; - intline = mot_info[mot_entry].pci_irq_list->primary[intpin]; - } - } - } - } - - /* Write calculated interrupt value to header and device list */ - dev->irq = intline; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, (u8)dev->irq); -} - -void __init -prep_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - int irq; - int have_openpic = (OpenPIC_Addr != NULL); - - prep_route_pci_interrupts(); - - printk("Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name); - - /* Iterate through all the PCI devices, setting the IRQ */ - for_each_pci_dev(dev) { - /* - * If we have residual data, then this is easy: query the - * residual data for the IRQ line allocated to the device. - * This works the same whether we have an OpenPic or not. - */ - if (have_residual_data) { - irq = residual_pcidev_irq(dev); - dev->irq = have_openpic ? openpic_to_irq(irq) : irq; - } - /* - * If we don't have residual data, then we need to use - * tables to determine the IRQ. The table organisation - * is different depending on whether there is an OpenPIC - * or not. The tables are only used for bus 0, so check - * this first. - */ - else if (dev->bus->number == 0) { - irq = Motherboard_map[PCI_SLOT(dev->devfn)]; - dev->irq = have_openpic ? openpic_to_irq(irq) - : Motherboard_routes[irq]; - } - /* - * Finally, if we don't have residual data and the bus is - * non-zero, use the callback (if provided) - */ - else { - if (Motherboard_non0 != NULL) - Motherboard_non0(dev); - - continue; - } - - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - - /* Setup the Winbond or Via PIB - prep_pib_init() is coded for - * the non-openpic case, but it breaks (at least) the Utah - * (Powerstack II Pro4000), so only call it if we have an - * openpic. - */ - if (have_openpic) - prep_pib_init(); -} - -static void __init -prep_pcibios_after_init(void) -{ -#if 0 - struct pci_dev *dev; - - /* If there is a WD 90C, reset the IO BAR to 0x0 (it started that - * way, but the PCI layer relocated it because it thought 0x0 was - * invalid for a BAR). - * If you don't do this, the card's VGA base will be <IO BAR>+0xc0000 - * instead of 0xc0000. vgacon.c (for example) is completely unaware of - * this little quirk. - */ - dev = pci_get_device(PCI_VENDOR_ID_WD, PCI_DEVICE_ID_WD_90C, NULL); - if (dev) { - dev->resource[1].end -= dev->resource[1].start; - dev->resource[1].start = 0; - /* tell the hardware */ - pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0x0); - pci_dev_put(dev); - } -#endif -} - -static void __init -prep_init_resource(struct resource *res, unsigned long start, - unsigned long end, int flags) -{ - res->flags = flags; - res->start = start; - res->end = end; - res->name = "PCI host bridge"; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; -} - -void __init -prep_find_bridges(void) -{ - struct pci_controller* hose; - - hose = pcibios_alloc_controller(); - if (!hose) - return; - - hose->first_busno = 0; - hose->last_busno = 0xff; - hose->pci_mem_offset = PREP_ISA_MEM_BASE; - hose->io_base_phys = PREP_ISA_IO_BASE; - hose->io_base_virt = ioremap(PREP_ISA_IO_BASE, 0x800000); - prep_init_resource(&hose->io_resource, 0, 0x007fffff, IORESOURCE_IO); - prep_init_resource(&hose->mem_resources[0], 0xc0000000, 0xfeffffff, - IORESOURCE_MEM); - setup_indirect_pci(hose, PREP_ISA_IO_BASE + 0xcf8, - PREP_ISA_IO_BASE + 0xcfc); - - printk("PReP architecture\n"); - - if (have_residual_data) { - PPC_DEVICE *hostbridge; - - hostbridge = residual_find_device(PROCESSORDEVICE, NULL, - BridgeController, PCIBridge, -1, 0); - if (hostbridge && - ((hostbridge->DeviceId.Interface == PCIBridgeIndirect) || - (hostbridge->DeviceId.Interface == PCIBridgeRS6K))) { - PnP_TAG_PACKET * pkt; - pkt = PnP_find_large_vendor_packet( - res->DevicePnPHeap+hostbridge->AllocatedOffset, - 3, 0); - if(pkt) { -#define p pkt->L4_Pack.L4_Data.L4_PPCPack - setup_indirect_pci(hose, - ld_le32((unsigned *) (p.PPCData)), - ld_le32((unsigned *) (p.PPCData+8))); -#undef p - } else - setup_indirect_pci(hose, 0x80000cf8, 0x80000cfc); - } - } - - ppc_md.pcibios_fixup = prep_pcibios_fixup; - ppc_md.pcibios_after_init = prep_pcibios_after_init; -} |