21 files changed, 152 insertions, 1009 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1e6230bea09d..088dd2afcfe4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -118,28 +118,31 @@ config PPC
 	# Please keep this list sorted alphabetically.
 	#
 	select ARCH_32BIT_OFF_T if PPC32
+	select ARCH_ENABLE_MEMORY_HOTPLUG
+	select ARCH_ENABLE_MEMORY_HOTREMOVE
+	select ARCH_HAS_COPY_MC			if PPC64
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
+	select ARCH_HAS_DMA_MAP_DIRECT 		if PPC_PSERIES
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
-	select ARCH_HAS_KCOV
 	select ARCH_HAS_HUGEPD			if HUGETLB_PAGE
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_MEMBARRIER_CALLBACKS
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_MEMREMAP_COMPAT_ALIGN
 	select ARCH_HAS_MMIOWB			if PPC64
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_PMEM_API
-	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP		if PPC_BOOK3S_64
 	select ARCH_HAS_PTE_SPECIAL
-	select ARCH_HAS_MEMBARRIER_CALLBACKS
-	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_SCALED_CPUTIME		if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
 	select ARCH_HAS_STRICT_KERNEL_RWX	if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION)
 	select ARCH_HAS_TICK_BROADCAST		if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UACCESS_FLUSHCACHE
-	select ARCH_HAS_COPY_MC			if PPC64
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_KEEP_MEMBLOCK
@@ -162,9 +165,8 @@ config PPC
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select DCACHE_WORD_ACCESS		if PPC64 && CPU_LITTLE_ENDIAN
-	select DMA_OPS				if PPC64
 	select DMA_OPS_BYPASS			if PPC64
-	select ARCH_HAS_DMA_MAP_DIRECT 		if PPC64 && PPC_PSERIES
+	select DMA_OPS				if PPC64
 	select DYNAMIC_FTRACE			if FUNCTION_TRACER
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
@@ -184,23 +186,22 @@ config PPC
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_VDSO_TIME_NS
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_HUGE_VMALLOC		if HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_HUGE_VMAP		if PPC_BOOK3S_64 && PPC_RADIX_MMU
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KASAN			if PPC32 && PPC_PAGE_SHIFT <= 14
 	select HAVE_ARCH_KASAN_VMALLOC		if PPC32 && PPC_PAGE_SHIFT <= 14
-	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_KFENCE			if PPC32
+	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT
 	select HAVE_ARCH_NVRAM_OPS
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_C_RECORDMCOUNT
-	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
-	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
 	select HAVE_CONTEXT_TRACKING		if PPC64
+	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DYNAMIC_FTRACE
@@ -214,10 +215,13 @@ config PPC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_GCC_PLUGINS			if GCC_VERSION >= 50200   # plugin support on gcc <= 5.1 is buggy on PPC
 	select HAVE_GENERIC_VDSO
+	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
+	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA			if DEFAULT_UIMAGE
 	select HAVE_KERNEL_LZO			if DEFAULT_UIMAGE
@@ -229,25 +233,25 @@ config PPC
 	select HAVE_LIVEPATCH			if HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
-	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC64 && PPC_BOOK3S && SMP
 	select HAVE_OPTPROBES
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI		if PPC64
-	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select MMU_GATHER_RCU_TABLE_FREE
-	select MMU_GATHER_PAGE_SIZE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE
+	select HAVE_RSEQ
 	select HAVE_SOFTIRQ_ON_OWN_STACK
+	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
+	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select HAVE_IRQ_TIME_ACCOUNTING
-	select HAVE_RSEQ
+	select HUGETLB_PAGE_SIZE_VARIABLE	if PPC_BOOK3S_64 && HUGETLB_PAGE
 	select IOMMU_HELPER			if PPC64
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
+	select MMU_GATHER_PAGE_SIZE
+	select MMU_GATHER_RCU_TABLE_FREE
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE		if PPC64 || NOT_COHERENT_CACHE
 	select NEED_SG_DMA_LENGTH
@@ -420,11 +424,6 @@ config HIGHMEM
 
 source "kernel/Kconfig.hz"
 
-config HUGETLB_PAGE_SIZE_VARIABLE
-	bool
-	depends on HUGETLB_PAGE && PPC_BOOK3S_64
-	default y
-
 config MATH_EMULATION
 	bool "Math emulation"
 	depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE
@@ -520,12 +519,6 @@ config ARCH_CPU_PROBE_RELEASE
 	def_bool y
 	depends on HOTPLUG_CPU
 
-config ARCH_ENABLE_MEMORY_HOTPLUG
-	def_bool y
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
-	def_bool y
-
 config PPC64_SUPPORTS_MEMORY_FAILURE
 	bool "Add support for memory hwpoison"
 	depends on PPC_BOOK3S_64
@@ -705,9 +698,6 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
 	depends on PPC_BOOK3S_64
 
-config SYS_SUPPORTS_HUGETLBFS
-	bool
-
 config ILLEGAL_POINTER_VALUE
 	hex
 	# This is roughly half way between the top of user space and the bottom
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 41fa0a8715e3..cdb796b76e2e 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -191,7 +191,7 @@ if [ -z "$kernel" ]; then
     kernel=vmlinux
 fi
 
-LANG=C elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
+LC_ALL=C elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
 case "$elfformat" in
     elf64-powerpcle)	format=elf64lppc	;;
     elf64-powerpc)	format=elf32ppc	;;
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index bc76970b6ee5..debe8c4f7062 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -12,7 +12,7 @@
 
 #ifdef __ASSEMBLY__
 
-/* Based off of objdump optput from glibc */
+/* Based off of objdump output from glibc */
 
 #define MCOUNT_SAVE_FRAME			\
 	stwu	r1,-48(r1);			\
@@ -52,7 +52,7 @@ extern void _mcount(void);
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
-       /* reloction of mcount call site is the same as the address */
+       /* relocation of mcount call site is the same as the address */
        return addr;
 }
 
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 273edd208ec5..f130783c8301 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -663,11 +663,6 @@ static inline void name at					\
 #define xlate_dev_mem_ptr(p)	__va(p)
 
 /*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
  * We don't do relaxed operations yet, at least not with this semantic
  */
 #define readb_relaxed(addr)	readb(addr)
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index c76157237e22..6ea9001de9a9 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -28,9 +28,6 @@ extern struct device_node *opal_node;
 
 /* API functions */
 int64_t opal_invalid_call(void);
-int64_t opal_npu_destroy_context(uint64_t phb_id, uint64_t pid, uint64_t bdf);
-int64_t opal_npu_init_context(uint64_t phb_id, int pasid, uint64_t msr,
-			uint64_t bdf);
 int64_t opal_npu_map_lpar(uint64_t phb_id, uint64_t bdf, uint64_t lparid,
 			uint64_t lpcr);
 int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t bdfn,
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index d2a2a14e56f9..74424c14515c 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -126,7 +126,6 @@ struct pci_controller {
 #endif	/* CONFIG_PPC64 */
 
 	void *private_data;
-	struct npu *npu;
 };
 
 /* These are used for config access before all the PCI probing
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 6436f0b41539..d1f53260725c 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -119,11 +119,4 @@ extern void pcibios_scan_phb(struct pci_controller *hose);
 
 #endif	/* __KERNEL__ */
 
-extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
-extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
-extern int pnv_npu2_init(struct pci_controller *hose);
-extern int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
-		unsigned long msr);
-extern int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev);
-
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index fab84024650c..3f35c8d20be7 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -8,6 +8,7 @@
 #include <linux/moduleloader.h>
 #include <linux/err.h>
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/bug.h>
 #include <asm/module.h>
 #include <linux/uaccess.h>
@@ -88,17 +89,22 @@ int module_finalize(const Elf_Ehdr *hdr,
 	return 0;
 }
 
-#ifdef MODULES_VADDR
 static __always_inline void *
 __module_alloc(unsigned long size, unsigned long start, unsigned long end)
 {
-	return __vmalloc_node_range(size, 1, start, end, GFP_KERNEL,
-				    PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS, NUMA_NO_NODE,
-				    __builtin_return_address(0));
+	/*
+	 * Don't do huge page allocations for modules yet until more testing
+	 * is done. STRICT_MODULE_RWX may require extra work to support this
+	 * too.
+	 */
+	return __vmalloc_node_range(size, 1, start, end, GFP_KERNEL, PAGE_KERNEL_EXEC,
+				    VM_FLUSH_RESET_PERMS | VM_NO_HUGE_VMAP,
+				    NUMA_NO_NODE, __builtin_return_address(0));
 }
 
 void *module_alloc(unsigned long size)
 {
+#ifdef MODULES_VADDR
 	unsigned long limit = (unsigned long)_etext - SZ_32M;
 	void *ptr = NULL;
 
@@ -112,5 +118,7 @@ void *module_alloc(unsigned long size)
 		ptr = __module_alloc(size, MODULES_VADDR, MODULES_END);
 
 	return ptr;
-}
+#else
+	return __module_alloc(size, VMALLOC_START, VMALLOC_END);
 #endif
+}
diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index f9eb49e23ec8..5056e175ca2c 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -951,6 +951,93 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
 }
 
 /**
+ * add_node_props - Reads node properties from device node structure and add
+ *                  them to fdt.
+ * @fdt:            Flattened device tree of the kernel
+ * @node_offset:    offset of the node to add a property at
+ * @dn:             device node pointer
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
+{
+	int ret = 0;
+	struct property *pp;
+
+	if (!dn)
+		return -EINVAL;
+
+	for_each_property_of_node(dn, pp) {
+		ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
+		if (ret < 0) {
+			pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * update_cpus_node - Update cpus node of flattened device tree using of_root
+ *                    device node.
+ * @fdt:              Flattened device tree of the kernel.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int update_cpus_node(void *fdt)
+{
+	struct device_node *cpus_node, *dn;
+	int cpus_offset, cpus_subnode_offset, ret = 0;
+
+	cpus_offset = fdt_path_offset(fdt, "/cpus");
+	if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
+		pr_err("Malformed device tree: error reading /cpus node: %s\n",
+		       fdt_strerror(cpus_offset));
+		return cpus_offset;
+	}
+
+	if (cpus_offset > 0) {
+		ret = fdt_del_node(fdt, cpus_offset);
+		if (ret < 0) {
+			pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
+			return -EINVAL;
+		}
+	}
+
+	/* Add cpus node to fdt */
+	cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
+	if (cpus_offset < 0) {
+		pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
+		return -EINVAL;
+	}
+
+	/* Add cpus node properties */
+	cpus_node = of_find_node_by_path("/cpus");
+	ret = add_node_props(fdt, cpus_offset, cpus_node);
+	of_node_put(cpus_node);
+	if (ret < 0)
+		return ret;
+
+	/* Loop through all subnodes of cpus and add them to fdt */
+	for_each_node_by_type(dn, "cpu") {
+		cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
+		if (cpus_subnode_offset < 0) {
+			pr_err("Unable to add %s subnode: %s\n", dn->full_name,
+			       fdt_strerror(cpus_subnode_offset));
+			ret = cpus_subnode_offset;
+			goto out;
+		}
+
+		ret = add_node_props(fdt, cpus_subnode_offset, dn);
+		if (ret < 0)
+			goto out;
+	}
+out:
+	of_node_put(dn);
+	return ret;
+}
+
+/**
  * setup_new_fdt_ppc64 - Update the flattend device-tree of the kernel
  *                       being loaded.
  * @image:               kexec image being loaded.
@@ -1006,6 +1093,11 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
 		}
 	}
 
+	/* Update cpus nodes information to account hotplug CPUs. */
+	ret =  update_cpus_node(fdt);
+	if (ret < 0)
+		goto out;
+
 	/* Update memory reserve map */
 	ret = get_reserved_memory_ranges(&rmem);
 	if (ret)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index f2c690ee75d1..cc1a8a0f311e 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -5,6 +5,9 @@
 
 ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_TOC)
 
+CFLAGS_code-patching.o += -fno-stack-protector
+CFLAGS_feature-fixups.o += -fno-stack-protector
+
 CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index d142b76d507d..9a75ba078e1b 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -106,7 +106,8 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
  * At this point we do the placement change only for BOOK3S 64. This would
  * possibly work on other subarchs.
  */
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
+pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
+		      unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
 	p4d_t *p4;
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e4b05667686e..f998e655b570 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -40,8 +40,8 @@ config PPC_85xx
 
 config PPC_8xx
 	bool "Freescale 8xx"
+	select ARCH_SUPPORTS_HUGETLBFS
 	select FSL_SOC
-	select SYS_SUPPORTS_HUGETLBFS
 	select PPC_HAVE_KUEP
 	select PPC_HAVE_KUAP
 	select HAVE_ARCH_VMAP_STACK
@@ -95,9 +95,11 @@ config PPC_BOOK3S_64
 	bool "Server processors"
 	select PPC_FPU
 	select PPC_HAVE_PMU_SUPPORT
-	select SYS_SUPPORTS_HUGETLBFS
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
+	select ARCH_ENABLE_PMD_SPLIT_PTLOCK
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
+	select ARCH_SUPPORTS_HUGETLBFS
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select IRQ_WORK
 	select PPC_MM_SLICES
@@ -280,9 +282,9 @@ config FSL_BOOKE
 # this is for common code between PPC32 & PPC64 FSL BOOKE
 config PPC_FSL_BOOK3E
 	bool
+	select ARCH_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
 	select FSL_EMB_PERFMON
 	select PPC_SMP_MUXED_IPI
-	select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
 	select PPC_DOORBELL
 	default y if FSL_BOOKE
 
@@ -358,10 +360,6 @@ config SPE
 
 	  If in doubt, say Y here.
 
-config ARCH_ENABLE_SPLIT_PMD_PTLOCK
-	def_bool y
-	depends on PPC_BOOK3S_64
-
 config PPC_RADIX_MMU
 	bool "Radix MMU Support"
 	depends on PPC_BOOK3S_64
@@ -421,10 +419,6 @@ config PPC_PKEY
 	depends on PPC_BOOK3S_64
 	depends on PPC_MEM_KEYS || PPC_KUAP || PPC_KUEP
 
-config ARCH_ENABLE_HUGEPAGE_MIGRATION
-	def_bool y
-	depends on PPC_BOOK3S_64 && HUGETLB_PAGE && MIGRATION
-
 
 config PPC_MMU_NOHASH
 	def_bool y
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 2eb6ae150d1f..be2546b96816 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_FA_DUMP)	+= opal-fadump.o
 obj-$(CONFIG_PRESERVE_FA_DUMP)	+= opal-fadump.o
 obj-$(CONFIG_OPAL_CORE)	+= opal-core.o
-obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
+obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o pci-ioda-tce.o
 obj-$(CONFIG_PCI_IOV)   += pci-sriov.o
 obj-$(CONFIG_CXL_BASE)	+= pci-cxl.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
diff --git a/arch/powerpc/platforms/powernv/memtrace.c b/arch/powerpc/platforms/powernv/memtrace.c
index 71c1262589fe..537a4daed614 100644
--- a/arch/powerpc/platforms/powernv/memtrace.c
+++ b/arch/powerpc/platforms/powernv/memtrace.c
@@ -104,8 +104,8 @@ static void memtrace_clear_range(unsigned long start_pfn,
 	 * Before we go ahead and use this range as cache inhibited range
 	 * flush the cache.
 	 */
-	flush_dcache_range_chunked(PFN_PHYS(start_pfn),
-				   PFN_PHYS(start_pfn + nr_pages),
+	flush_dcache_range_chunked((unsigned long)pfn_to_kaddr(start_pfn),
+				   (unsigned long)pfn_to_kaddr(start_pfn + nr_pages),
 				   FLUSH_CHUNK_SIZE);
 }
 
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
deleted file mode 100644
index b711dc3262a3..000000000000
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ /dev/null
@@ -1,705 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * This file implements the DMA operations for NVLink devices. The NPU
- * devices all point to the same iommu table as the parent PCI device.
- *
- * Copyright Alistair Popple, IBM Corporation 2015.
- */
-
-#include <linux/mmu_notifier.h>
-#include <linux/mmu_context.h>
-#include <linux/of.h>
-#include <linux/pci.h>
-#include <linux/memblock.h>
-#include <linux/sizes.h>
-
-#include <asm/debugfs.h>
-#include <asm/powernv.h>
-#include <asm/ppc-pci.h>
-#include <asm/opal.h>
-
-#include "pci.h"
-
-static struct pci_dev *get_pci_dev(struct device_node *dn)
-{
-	struct pci_dn *pdn = PCI_DN(dn);
-	struct pci_dev *pdev;
-
-	pdev = pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
-					   pdn->busno, pdn->devfn);
-
-	/*
-	 * pci_get_domain_bus_and_slot() increased the reference count of
-	 * the PCI device, but callers don't need that actually as the PE
-	 * already holds a reference to the device. Since callers aren't
-	 * aware of the reference count change, call pci_dev_put() now to
-	 * avoid leaks.
-	 */
-	if (pdev)
-		pci_dev_put(pdev);
-
-	return pdev;
-}
-
-/* Given a NPU device get the associated PCI device. */
-struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
-{
-	struct device_node *dn;
-	struct pci_dev *gpdev;
-
-	if (WARN_ON(!npdev))
-		return NULL;
-
-	if (WARN_ON(!npdev->dev.of_node))
-		return NULL;
-
-	/* Get assoicated PCI device */
-	dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
-	if (!dn)
-		return NULL;
-
-	gpdev = get_pci_dev(dn);
-	of_node_put(dn);
-
-	return gpdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_gpu_dev);
-
-/* Given the real PCI device get a linked NPU device. */
-struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
-{
-	struct device_node *dn;
-	struct pci_dev *npdev;
-
-	if (WARN_ON(!gpdev))
-		return NULL;
-
-	/* Not all PCI devices have device-tree nodes */
-	if (!gpdev->dev.of_node)
-		return NULL;
-
-	/* Get assoicated PCI device */
-	dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
-	if (!dn)
-		return NULL;
-
-	npdev = get_pci_dev(dn);
-	of_node_put(dn);
-
-	return npdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_npu_dev);
-
-#ifdef CONFIG_IOMMU_API
-/*
- * Returns the PE assoicated with the PCI device of the given
- * NPU. Returns the linked pci device if pci_dev != NULL.
- */
-static struct pnv_ioda_pe *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
-						  struct pci_dev **gpdev)
-{
-	struct pnv_phb *phb;
-	struct pci_controller *hose;
-	struct pci_dev *pdev;
-	struct pnv_ioda_pe *pe;
-	struct pci_dn *pdn;
-
-	pdev = pnv_pci_get_gpu_dev(npe->pdev);
-	if (!pdev)
-		return NULL;
-
-	pdn = pci_get_pdn(pdev);
-	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-		return NULL;
-
-	hose = pci_bus_to_host(pdev->bus);
-	phb = hose->private_data;
-	pe = &phb->ioda.pe_array[pdn->pe_number];
-
-	if (gpdev)
-		*gpdev = pdev;
-
-	return pe;
-}
-
-static long pnv_npu_unset_window(struct iommu_table_group *table_group,
-		int num);
-
-static long pnv_npu_set_window(struct iommu_table_group *table_group, int num,
-		struct iommu_table *tbl)
-{
-	struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
-			table_group);
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-	const unsigned long size = tbl->it_indirect_levels ?
-		tbl->it_level_size : tbl->it_size;
-	const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
-	const __u64 win_size = tbl->it_size << tbl->it_page_shift;
-	int num2 = (num == 0) ? 1 : 0;
-
-	/* NPU has just one TVE so if there is another table, remove it first */
-	if (npe->table_group.tables[num2])
-		pnv_npu_unset_window(&npe->table_group, num2);
-
-	pe_info(npe, "Setting up window %llx..%llx pg=%lx\n",
-			start_addr, start_addr + win_size - 1,
-			IOMMU_PAGE_SIZE(tbl));
-
-	rc = opal_pci_map_pe_dma_window(phb->opal_id,
-			npe->pe_number,
-			npe->pe_number,
-			tbl->it_indirect_levels + 1,
-			__pa(tbl->it_base),
-			size << 3,
-			IOMMU_PAGE_SIZE(tbl));
-	if (rc) {
-		pe_err(npe, "Failed to configure TCE table, err %lld\n", rc);
-		return rc;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	/* Add the table to the list so its TCE cache will get invalidated */
-	pnv_pci_link_table_and_group(phb->hose->node, num,
-			tbl, &npe->table_group);
-
-	return 0;
-}
-
-static long pnv_npu_unset_window(struct iommu_table_group *table_group, int num)
-{
-	struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
-			table_group);
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-
-	if (!npe->table_group.tables[num])
-		return 0;
-
-	pe_info(npe, "Removing DMA window\n");
-
-	rc = opal_pci_map_pe_dma_window(phb->opal_id, npe->pe_number,
-			npe->pe_number,
-			0/* levels */, 0/* table address */,
-			0/* table size */, 0/* page size */);
-	if (rc) {
-		pe_err(npe, "Unmapping failed, ret = %lld\n", rc);
-		return rc;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	pnv_pci_unlink_table_and_group(npe->table_group.tables[num],
-			&npe->table_group);
-
-	return 0;
-}
-
-/* Switch ownership from platform code to external user (e.g. VFIO) */
-static void pnv_npu_take_ownership(struct iommu_table_group *table_group)
-{
-	struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
-			table_group);
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-	struct pci_dev *gpdev = NULL;
-
-	/*
-	 * Note: NPU has just a single TVE in the hardware which means that
-	 * while used by the kernel, it can have either 32bit window or
-	 * DMA bypass but never both. So we deconfigure 32bit window only
-	 * if it was enabled at the moment of ownership change.
-	 */
-	if (npe->table_group.tables[0]) {
-		pnv_npu_unset_window(&npe->table_group, 0);
-		return;
-	}
-
-	/* Disable bypass */
-	rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
-			npe->pe_number, npe->pe_number,
-			0 /* bypass base */, 0);
-	if (rc) {
-		pe_err(npe, "Failed to disable bypass, err %lld\n", rc);
-		return;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(npe->phb, false);
-
-	get_gpu_pci_dev_and_pe(npe, &gpdev);
-	if (gpdev)
-		pnv_npu2_unmap_lpar_dev(gpdev);
-}
-
-static void pnv_npu_release_ownership(struct iommu_table_group *table_group)
-{
-	struct pnv_ioda_pe *npe = container_of(table_group, struct pnv_ioda_pe,
-			table_group);
-	struct pci_dev *gpdev = NULL;
-
-	get_gpu_pci_dev_and_pe(npe, &gpdev);
-	if (gpdev)
-		pnv_npu2_map_lpar_dev(gpdev, 0, MSR_DR | MSR_PR | MSR_HV);
-}
-
-static struct iommu_table_group_ops pnv_pci_npu_ops = {
-	.set_window = pnv_npu_set_window,
-	.unset_window = pnv_npu_unset_window,
-	.take_ownership = pnv_npu_take_ownership,
-	.release_ownership = pnv_npu_release_ownership,
-};
-#endif /* !CONFIG_IOMMU_API */
-
-/*
- * NPU2 ATS
- */
-/* Maximum possible number of ATSD MMIO registers per NPU */
-#define NV_NMMU_ATSD_REGS 8
-#define NV_NPU_MAX_PE_NUM	16
-
-/*
- * A compound NPU IOMMU group which might consist of 1 GPU + 2xNPUs (POWER8) or
- * up to 3 x (GPU + 2xNPUs) (POWER9).
- */
-struct npu_comp {
-	struct iommu_table_group table_group;
-	int pe_num;
-	struct pnv_ioda_pe *pe[NV_NPU_MAX_PE_NUM];
-};
-
-/* An NPU descriptor, valid for POWER9 only */
-struct npu {
-	int index;
-	struct npu_comp npucomp;
-};
-
-#ifdef CONFIG_IOMMU_API
-static long pnv_npu_peers_create_table_userspace(
-		struct iommu_table_group *table_group,
-		int num, __u32 page_shift, __u64 window_size, __u32 levels,
-		struct iommu_table **ptbl)
-{
-	struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
-			table_group);
-
-	if (!npucomp->pe_num || !npucomp->pe[0] ||
-			!npucomp->pe[0]->table_group.ops ||
-			!npucomp->pe[0]->table_group.ops->create_table)
-		return -EFAULT;
-
-	return npucomp->pe[0]->table_group.ops->create_table(
-			&npucomp->pe[0]->table_group, num, page_shift,
-			window_size, levels, ptbl);
-}
-
-static long pnv_npu_peers_set_window(struct iommu_table_group *table_group,
-		int num, struct iommu_table *tbl)
-{
-	int i, j;
-	long ret = 0;
-	struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
-			table_group);
-
-	for (i = 0; i < npucomp->pe_num; ++i) {
-		struct pnv_ioda_pe *pe = npucomp->pe[i];
-
-		if (!pe->table_group.ops->set_window)
-			continue;
-
-		ret = pe->table_group.ops->set_window(&pe->table_group,
-				num, tbl);
-		if (ret)
-			break;
-	}
-
-	if (ret) {
-		for (j = 0; j < i; ++j) {
-			struct pnv_ioda_pe *pe = npucomp->pe[j];
-
-			if (!pe->table_group.ops->unset_window)
-				continue;
-
-			ret = pe->table_group.ops->unset_window(
-					&pe->table_group, num);
-			if (ret)
-				break;
-		}
-	} else {
-		table_group->tables[num] = iommu_tce_table_get(tbl);
-	}
-
-	return ret;
-}
-
-static long pnv_npu_peers_unset_window(struct iommu_table_group *table_group,
-		int num)
-{
-	int i, j;
-	long ret = 0;
-	struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
-			table_group);
-
-	for (i = 0; i < npucomp->pe_num; ++i) {
-		struct pnv_ioda_pe *pe = npucomp->pe[i];
-
-		WARN_ON(npucomp->table_group.tables[num] !=
-				table_group->tables[num]);
-		if (!npucomp->table_group.tables[num])
-			continue;
-
-		if (!pe->table_group.ops->unset_window)
-			continue;
-
-		ret = pe->table_group.ops->unset_window(&pe->table_group, num);
-		if (ret)
-			break;
-	}
-
-	if (ret) {
-		for (j = 0; j < i; ++j) {
-			struct pnv_ioda_pe *pe = npucomp->pe[j];
-
-			if (!npucomp->table_group.tables[num])
-				continue;
-
-			if (!pe->table_group.ops->set_window)
-				continue;
-
-			ret = pe->table_group.ops->set_window(&pe->table_group,
-					num, table_group->tables[num]);
-			if (ret)
-				break;
-		}
-	} else if (table_group->tables[num]) {
-		iommu_tce_table_put(table_group->tables[num]);
-		table_group->tables[num] = NULL;
-	}
-
-	return ret;
-}
-
-static void pnv_npu_peers_take_ownership(struct iommu_table_group *table_group)
-{
-	int i;
-	struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
-			table_group);
-
-	for (i = 0; i < npucomp->pe_num; ++i) {
-		struct pnv_ioda_pe *pe = npucomp->pe[i];
-
-		if (!pe->table_group.ops ||
-		    !pe->table_group.ops->take_ownership)
-			continue;
-		pe->table_group.ops->take_ownership(&pe->table_group);
-	}
-}
-
-static void pnv_npu_peers_release_ownership(
-		struct iommu_table_group *table_group)
-{
-	int i;
-	struct npu_comp *npucomp = container_of(table_group, struct npu_comp,
-			table_group);
-
-	for (i = 0; i < npucomp->pe_num; ++i) {
-		struct pnv_ioda_pe *pe = npucomp->pe[i];
-
-		if (!pe->table_group.ops ||
-		    !pe->table_group.ops->release_ownership)
-			continue;
-		pe->table_group.ops->release_ownership(&pe->table_group);
-	}
-}
-
-static struct iommu_table_group_ops pnv_npu_peers_ops = {
-	.get_table_size = pnv_pci_ioda2_get_table_size,
-	.create_table = pnv_npu_peers_create_table_userspace,
-	.set_window = pnv_npu_peers_set_window,
-	.unset_window = pnv_npu_peers_unset_window,
-	.take_ownership = pnv_npu_peers_take_ownership,
-	.release_ownership = pnv_npu_peers_release_ownership,
-};
-
-static void pnv_comp_attach_table_group(struct npu_comp *npucomp,
-		struct pnv_ioda_pe *pe)
-{
-	if (WARN_ON(npucomp->pe_num == NV_NPU_MAX_PE_NUM))
-		return;
-
-	npucomp->pe[npucomp->pe_num] = pe;
-	++npucomp->pe_num;
-}
-
-static struct iommu_table_group *
-	pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
-{
-	struct iommu_table_group *compound_group;
-	struct npu_comp *npucomp;
-	struct pci_dev *gpdev = NULL;
-	struct pci_controller *hose;
-	struct pci_dev *npdev = NULL;
-
-	list_for_each_entry(gpdev, &pe->pbus->devices, bus_list) {
-		npdev = pnv_pci_get_npu_dev(gpdev, 0);
-		if (npdev)
-			break;
-	}
-
-	if (!npdev)
-		/* It is not an NPU attached device, skip */
-		return NULL;
-
-	hose = pci_bus_to_host(npdev->bus);
-
-	if (hose->npu) {
-		/* P9 case: compound group is per-NPU (all gpus, all links) */
-		npucomp = &hose->npu->npucomp;
-	} else {
-		/* P8 case: Compound group is per-GPU (1 gpu, 2 links) */
-		npucomp = pe->npucomp = kzalloc(sizeof(*npucomp), GFP_KERNEL);
-	}
-
-	compound_group = &npucomp->table_group;
-	if (!compound_group->group) {
-		compound_group->ops = &pnv_npu_peers_ops;
-		iommu_register_group(compound_group, hose->global_number,
-				pe->pe_number);
-
-		/* Steal capabilities from a GPU PE */
-		compound_group->max_dynamic_windows_supported =
-			pe->table_group.max_dynamic_windows_supported;
-		compound_group->tce32_start = pe->table_group.tce32_start;
-		compound_group->tce32_size = pe->table_group.tce32_size;
-		compound_group->max_levels = pe->table_group.max_levels;
-		if (!compound_group->pgsizes)
-			compound_group->pgsizes = pe->table_group.pgsizes;
-	}
-
-	/*
-	 * The gpu would have been added to the iommu group that's created
-	 * for the PE. Pull it out now.
-	 */
-	iommu_del_device(&gpdev->dev);
-
-       /*
-	* I'm not sure this is strictly required, but it's probably a good idea
-	* since the table_group for the PE is going to be attached to the
-	* compound table group. If we leave the PE's iommu group active then
-	* we might have the same table_group being modifiable via two sepeate
-	* iommu groups.
-	*/
-	iommu_group_put(pe->table_group.group);
-
-	/* now put the GPU into the compound group */
-	pnv_comp_attach_table_group(npucomp, pe);
-	iommu_add_device(compound_group, &gpdev->dev);
-
-	return compound_group;
-}
-
-static struct iommu_table_group *pnv_npu_compound_attach(struct pnv_ioda_pe *pe)
-{
-	struct iommu_table_group *table_group;
-	struct npu_comp *npucomp;
-	struct pci_dev *gpdev = NULL;
-	struct pci_dev *npdev;
-	struct pnv_ioda_pe *gpe = get_gpu_pci_dev_and_pe(pe, &gpdev);
-
-	WARN_ON(!(pe->flags & PNV_IODA_PE_DEV));
-	if (!gpe)
-		return NULL;
-
-	/*
-	 * IODA2 bridges get this set up from pci_controller_ops::setup_bridge
-	 * but NPU bridges do not have this hook defined so we do it here.
-	 * We do not setup other table group parameters as they won't be used
-	 * anyway - NVLink bridges are subordinate PEs.
-	 */
-	pe->table_group.ops = &pnv_pci_npu_ops;
-
-	table_group = iommu_group_get_iommudata(
-			iommu_group_get(&gpdev->dev));
-
-	/*
-	 * On P9 NPU PHB and PCI PHB support different page sizes,
-	 * keep only matching. We expect here that NVLink bridge PE pgsizes is
-	 * initialized by the caller.
-	 */
-	table_group->pgsizes &= pe->table_group.pgsizes;
-	npucomp = container_of(table_group, struct npu_comp, table_group);
-	pnv_comp_attach_table_group(npucomp, pe);
-
-	list_for_each_entry(npdev, &pe->phb->hose->bus->devices, bus_list) {
-		struct pci_dev *gpdevtmp = pnv_pci_get_gpu_dev(npdev);
-
-		if (gpdevtmp != gpdev)
-			continue;
-
-		iommu_add_device(table_group, &npdev->dev);
-	}
-
-	return table_group;
-}
-
-void pnv_pci_npu_setup_iommu_groups(void)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	struct pnv_ioda_pe *pe;
-
-	/*
-	 * For non-nvlink devices the IOMMU group is registered when the PE is
-	 * configured and devices are added to the group when the per-device
-	 * DMA setup is run. That's done in hose->ops.dma_dev_setup() which is
-	 * only initialise for "normal" IODA PHBs.
-	 *
-	 * For NVLink devices we need to ensure the NVLinks and the GPU end up
-	 * in the same IOMMU group, so that's handled here.
-	 */
-	list_for_each_entry(hose, &hose_list, list_node) {
-		phb = hose->private_data;
-
-		if (phb->type == PNV_PHB_IODA2)
-			list_for_each_entry(pe, &phb->ioda.pe_list, list)
-				pnv_try_setup_npu_table_group(pe);
-	}
-
-	/*
-	 * Now we have all PHBs discovered, time to add NPU devices to
-	 * the corresponding IOMMU groups.
-	 */
-	list_for_each_entry(hose, &hose_list, list_node) {
-		unsigned long  pgsizes;
-
-		phb = hose->private_data;
-
-		if (phb->type != PNV_PHB_NPU_NVLINK)
-			continue;
-
-		pgsizes = pnv_ioda_parse_tce_sizes(phb);
-		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-			/*
-			 * IODA2 bridges get this set up from
-			 * pci_controller_ops::setup_bridge but NPU bridges
-			 * do not have this hook defined so we do it here.
-			 */
-			pe->table_group.pgsizes = pgsizes;
-			pnv_npu_compound_attach(pe);
-		}
-	}
-}
-#endif /* CONFIG_IOMMU_API */
-
-int pnv_npu2_init(struct pci_controller *hose)
-{
-	static int npu_index;
-	struct npu *npu;
-	int ret;
-
-	npu = kzalloc(sizeof(*npu), GFP_KERNEL);
-	if (!npu)
-		return -ENOMEM;
-
-	npu_index++;
-	if (WARN_ON(npu_index >= NV_MAX_NPUS)) {
-		ret = -ENOSPC;
-		goto fail_exit;
-	}
-	npu->index = npu_index;
-	hose->npu = npu;
-
-	return 0;
-
-fail_exit:
-	kfree(npu);
-	return ret;
-}
-
-int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
-		unsigned long msr)
-{
-	int ret;
-	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-	struct pci_controller *hose;
-	struct pnv_phb *nphb;
-
-	if (!npdev)
-		return -ENODEV;
-
-	hose = pci_bus_to_host(npdev->bus);
-	if (hose->npu == NULL) {
-		dev_info_once(&npdev->dev, "Nvlink1 does not support contexts");
-		return 0;
-	}
-
-	nphb = hose->private_data;
-
-	dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=%u\n",
-			nphb->opal_id, lparid);
-	/*
-	 * Currently we only support radix and non-zero LPCR only makes sense
-	 * for hash tables so skiboot expects the LPCR parameter to be a zero.
-	 */
-	ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), lparid,
-				0 /* LPCR bits */);
-	if (ret) {
-		dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
-		return ret;
-	}
-
-	dev_dbg(&gpdev->dev, "init context opalid=%llu msr=%lx\n",
-			nphb->opal_id, msr);
-	ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr,
-				    pci_dev_id(gpdev));
-	if (ret < 0)
-		dev_err(&gpdev->dev, "Failed to init context: %d\n", ret);
-	else
-		ret = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pnv_npu2_map_lpar_dev);
-
-void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr)
-{
-	struct pci_dev *gpdev;
-
-	list_for_each_entry(gpdev, &gpe->pbus->devices, bus_list)
-		pnv_npu2_map_lpar_dev(gpdev, 0, msr);
-}
-
-int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev)
-{
-	int ret;
-	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-	struct pci_controller *hose;
-	struct pnv_phb *nphb;
-
-	if (!npdev)
-		return -ENODEV;
-
-	hose = pci_bus_to_host(npdev->bus);
-	if (hose->npu == NULL) {
-		dev_info_once(&npdev->dev, "Nvlink1 does not support contexts");
-		return 0;
-	}
-
-	nphb = hose->private_data;
-
-	dev_dbg(&gpdev->dev, "destroy context opalid=%llu\n",
-			nphb->opal_id);
-	ret = opal_npu_destroy_context(nphb->opal_id, 0/*__unused*/,
-				       pci_dev_id(gpdev));
-	if (ret < 0) {
-		dev_err(&gpdev->dev, "Failed to destroy context: %d\n", ret);
-		return ret;
-	}
-
-	/* Set LPID to 0 anyway, just to be safe */
-	dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=0\n", nphb->opal_id);
-	ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), 0 /*LPID*/,
-				0 /* LPCR bits */);
-	if (ret)
-		dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pnv_npu2_unmap_lpar_dev);
diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c
index 5cd0f52d258f..01401e3da7ca 100644
--- a/arch/powerpc/platforms/powernv/opal-call.c
+++ b/arch/powerpc/platforms/powernv/opal-call.c
@@ -267,8 +267,6 @@ OPAL_CALL(opal_xive_get_queue_state,		OPAL_XIVE_GET_QUEUE_STATE);
 OPAL_CALL(opal_xive_set_queue_state,		OPAL_XIVE_SET_QUEUE_STATE);
 OPAL_CALL(opal_xive_get_vp_state,		OPAL_XIVE_GET_VP_STATE);
 OPAL_CALL(opal_signal_system_reset,		OPAL_SIGNAL_SYSTEM_RESET);
-OPAL_CALL(opal_npu_init_context,		OPAL_NPU_INIT_CONTEXT);
-OPAL_CALL(opal_npu_destroy_context,		OPAL_NPU_DESTROY_CONTEXT);
 OPAL_CALL(opal_npu_map_lpar,			OPAL_NPU_MAP_LPAR);
 OPAL_CALL(opal_imc_counters_init,		OPAL_IMC_COUNTERS_INIT);
 OPAL_CALL(opal_imc_counters_start,		OPAL_IMC_COUNTERS_START);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 66c3c3337334..7de464679292 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -47,8 +47,7 @@
 #define PNV_IODA1_M64_SEGS	8	/* Segments per M64 BAR	*/
 #define PNV_IODA1_DMA32_SEGSIZE	0x10000000
 
-static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_NVLINK",
-					      "NPU_OCAPI" };
+static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_OCAPI" };
 
 static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable);
 static void pnv_pci_configure_bus(struct pci_bus *bus);
@@ -192,8 +191,6 @@ void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
 	unsigned int pe_num = pe->pe_number;
 
 	WARN_ON(pe->pdev);
-	WARN_ON(pe->npucomp); /* NPUs for nvlink are not supposed to be freed */
-	kfree(pe->npucomp);
 	memset(pe, 0, sizeof(struct pnv_ioda_pe));
 
 	mutex_lock(&phb->ioda.pe_alloc_mutex);
@@ -875,7 +872,7 @@ int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 	 * Release from all parents PELT-V. NPUs don't have a PELTV
 	 * table
 	 */
-	if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+	if (phb->type != PNV_PHB_NPU_OCAPI)
 		pnv_ioda_unset_peltv(phb, pe, parent);
 
 	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
@@ -946,7 +943,7 @@ int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 	 * Configure PELTV. NPUs don't have a PELTV table so skip
 	 * configuration on them.
 	 */
-	if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+	if (phb->type != PNV_PHB_NPU_OCAPI)
 		pnv_ioda_set_peltv(phb, pe, true);
 
 	/* Setup reverse map */
@@ -1002,8 +999,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 
 	/* NOTE: We don't get a reference for the pointer in the PE
 	 * data structure, both the device and PE structures should be
-	 * destroyed at the same time. However, removing nvlink
-	 * devices will need some work.
+	 * destroyed at the same time.
 	 *
 	 * At some point we want to remove the PDN completely anyways
 	 */
@@ -1099,113 +1095,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 	return pe;
 }
 
-static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
-{
-	int pe_num, found_pe = false, rc;
-	long rid;
-	struct pnv_ioda_pe *pe;
-	struct pci_dev *gpu_pdev;
-	struct pci_dn *npu_pdn;
-	struct pnv_phb *phb = pci_bus_to_pnvhb(npu_pdev->bus);
-
-	/*
-	 * Intentionally leak a reference on the npu device (for
-	 * nvlink only; this is not an opencapi path) to make sure it
-	 * never goes away, as it's been the case all along and some
-	 * work is needed otherwise.
-	 */
-	pci_dev_get(npu_pdev);
-
-	/*
-	 * Due to a hardware errata PE#0 on the NPU is reserved for
-	 * error handling. This means we only have three PEs remaining
-	 * which need to be assigned to four links, implying some
-	 * links must share PEs.
-	 *
-	 * To achieve this we assign PEs such that NPUs linking the
-	 * same GPU get assigned the same PE.
-	 */
-	gpu_pdev = pnv_pci_get_gpu_dev(npu_pdev);
-	for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
-		pe = &phb->ioda.pe_array[pe_num];
-		if (!pe->pdev)
-			continue;
-
-		if (pnv_pci_get_gpu_dev(pe->pdev) == gpu_pdev) {
-			/*
-			 * This device has the same peer GPU so should
-			 * be assigned the same PE as the existing
-			 * peer NPU.
-			 */
-			dev_info(&npu_pdev->dev,
-				"Associating to existing PE %x\n", pe_num);
-			npu_pdn = pci_get_pdn(npu_pdev);
-			rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
-			npu_pdn->pe_number = pe_num;
-			phb->ioda.pe_rmap[rid] = pe->pe_number;
-			pe->device_count++;
-
-			/* Map the PE to this link */
-			rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
-					OpalPciBusAll,
-					OPAL_COMPARE_RID_DEVICE_NUMBER,
-					OPAL_COMPARE_RID_FUNCTION_NUMBER,
-					OPAL_MAP_PE);
-			WARN_ON(rc != OPAL_SUCCESS);
-			found_pe = true;
-			break;
-		}
-	}
-
-	if (!found_pe)
-		/*
-		 * Could not find an existing PE so allocate a new
-		 * one.
-		 */
-		return pnv_ioda_setup_dev_PE(npu_pdev);
-	else
-		return pe;
-}
-
-static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
-{
-	struct pci_dev *pdev;
-
-	list_for_each_entry(pdev, &bus->devices, bus_list)
-		pnv_ioda_setup_npu_PE(pdev);
-}
-
-static void pnv_pci_ioda_setup_nvlink(void)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	struct pnv_ioda_pe *pe;
-
-	list_for_each_entry(hose, &hose_list, list_node) {
-		phb = hose->private_data;
-		if (phb->type == PNV_PHB_NPU_NVLINK) {
-			/* PE#0 is needed for error reporting */
-			pnv_ioda_reserve_pe(phb, 0);
-			pnv_ioda_setup_npu_PEs(hose->bus);
-			if (phb->model == PNV_PHB_MODEL_NPU2)
-				WARN_ON_ONCE(pnv_npu2_init(hose));
-		}
-	}
-	list_for_each_entry(hose, &hose_list, list_node) {
-		phb = hose->private_data;
-		if (phb->type != PNV_PHB_IODA2)
-			continue;
-
-		list_for_each_entry(pe, &phb->ioda.pe_list, list)
-			pnv_npu2_map_lpar(pe, MSR_DR | MSR_PR | MSR_HV);
-	}
-
-#ifdef CONFIG_IOMMU_API
-	/* setup iommu groups so we can do nvlink pass-thru */
-	pnv_pci_npu_setup_iommu_groups();
-#endif
-}
-
 static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
 				       struct pnv_ioda_pe *pe);
 
@@ -1468,18 +1357,6 @@ static struct iommu_table_ops pnv_ioda1_iommu_ops = {
 #define PHB3_TCE_KILL_INVAL_PE		PPC_BIT(1)
 #define PHB3_TCE_KILL_INVAL_ONE		PPC_BIT(2)
 
-static void pnv_pci_phb3_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
-	__be64 __iomem *invalidate = pnv_ioda_get_inval_reg(phb, rm);
-	const unsigned long val = PHB3_TCE_KILL_INVAL_ALL;
-
-	mb(); /* Ensure previous TCE table stores are visible */
-	if (rm)
-		__raw_rm_writeq_be(val, invalidate);
-	else
-		__raw_writeq_be(val, invalidate);
-}
-
 static inline void pnv_pci_phb3_tce_invalidate_pe(struct pnv_ioda_pe *pe)
 {
 	/* 01xb - invalidate TCEs that match the specified PE# */
@@ -1539,20 +1416,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
 		struct pnv_phb *phb = pe->phb;
 		unsigned int shift = tbl->it_page_shift;
 
-		/*
-		 * NVLink1 can use the TCE kill register directly as
-		 * it's the same as PHB3. NVLink2 is different and
-		 * should go via the OPAL call.
-		 */
-		if (phb->model == PNV_PHB_MODEL_NPU) {
-			/*
-			 * The NVLink hardware does not support TCE kill
-			 * per TCE entry so we have to invalidate
-			 * the entire cache for it.
-			 */
-			pnv_pci_phb3_tce_invalidate_entire(phb, rm);
-			continue;
-		}
 		if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs)
 			pnv_pci_phb3_tce_invalidate(pe, rm, shift,
 						    index, npages);
@@ -1564,14 +1427,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
 	}
 }
 
-void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
-	if (phb->model == PNV_PHB_MODEL_NPU || phb->model == PNV_PHB_MODEL_PHB3)
-		pnv_pci_phb3_tce_invalidate_entire(phb, rm);
-	else
-		opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL, 0, 0, 0, 0);
-}
-
 static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index,
 		long npages, unsigned long uaddr,
 		enum dma_data_direction direction,
@@ -2451,7 +2306,6 @@ static void pnv_pci_enable_bridges(void)
 
 static void pnv_pci_ioda_fixup(void)
 {
-	pnv_pci_ioda_setup_nvlink();
 	pnv_pci_ioda_create_dbgfs();
 
 	pnv_pci_enable_bridges();
@@ -2824,15 +2678,6 @@ static void pnv_pci_release_device(struct pci_dev *pdev)
 		pnv_ioda_release_pe(pe);
 }
 
-static void pnv_npu_disable_device(struct pci_dev *pdev)
-{
-	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
-	struct eeh_pe *eehpe = edev ? edev->pe : NULL;
-
-	if (eehpe && eeh_ops && eeh_ops->reset)
-		eeh_ops->reset(eehpe, EEH_RESET_HOT);
-}
-
 static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
 {
 	struct pnv_phb *phb = hose->private_data;
@@ -2874,16 +2719,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 	.shutdown		= pnv_pci_ioda_shutdown,
 };
 
-static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
-	.setup_msi_irqs		= pnv_setup_msi_irqs,
-	.teardown_msi_irqs	= pnv_teardown_msi_irqs,
-	.enable_device_hook	= pnv_pci_enable_device_hook,
-	.window_alignment	= pnv_pci_window_alignment,
-	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
-	.shutdown		= pnv_pci_ioda_shutdown,
-	.disable_device		= pnv_npu_disable_device,
-};
-
 static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
 	.enable_device_hook	= pnv_ocapi_enable_device_hook,
 	.release_device		= pnv_pci_release_device,
@@ -2957,10 +2792,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		phb->model = PNV_PHB_MODEL_P7IOC;
 	else if (of_device_is_compatible(np, "ibm,power8-pciex"))
 		phb->model = PNV_PHB_MODEL_PHB3;
-	else if (of_device_is_compatible(np, "ibm,power8-npu-pciex"))
-		phb->model = PNV_PHB_MODEL_NPU;
-	else if (of_device_is_compatible(np, "ibm,power9-npu-pciex"))
-		phb->model = PNV_PHB_MODEL_NPU2;
 	else
 		phb->model = PNV_PHB_MODEL_UNKNOWN;
 
@@ -3118,9 +2949,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 
 	switch (phb->type) {
-	case PNV_PHB_NPU_NVLINK:
-		hose->controller_ops = pnv_npu_ioda_controller_ops;
-		break;
 	case PNV_PHB_NPU_OCAPI:
 		hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
 		break;
@@ -3173,11 +3001,6 @@ void __init pnv_pci_init_ioda2_phb(struct device_node *np)
 	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
 }
 
-void __init pnv_pci_init_npu_phb(struct device_node *np)
-{
-	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_NVLINK);
-}
-
 void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np)
 {
 	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 9b9bca169275..b18468dc31ff 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -926,17 +926,6 @@ void __init pnv_pci_init(void)
 	for_each_compatible_node(np, NULL, "ibm,ioda3-phb")
 		pnv_pci_init_ioda2_phb(np);
 
-	/* Look for NPU PHBs */
-	for_each_compatible_node(np, NULL, "ibm,ioda2-npu-phb")
-		pnv_pci_init_npu_phb(np);
-
-	/*
-	 * Look for NPU2 PHBs which we treat mostly as NPU PHBs with
-	 * the exception of TCE kill which requires an OPAL call.
-	 */
-	for_each_compatible_node(np, NULL, "ibm,ioda2-npu2-phb")
-		pnv_pci_init_npu_phb(np);
-
 	/* Look for NPU2 OpenCAPI PHBs */
 	for_each_compatible_node(np, NULL, "ibm,ioda2-npu2-opencapi-phb")
 		pnv_pci_init_npu2_opencapi_phb(np);
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 36d22920f5a3..c8d4f222a86f 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -10,10 +10,9 @@
 struct pci_dn;
 
 enum pnv_phb_type {
-	PNV_PHB_IODA1		= 0,
-	PNV_PHB_IODA2		= 1,
-	PNV_PHB_NPU_NVLINK	= 2,
-	PNV_PHB_NPU_OCAPI	= 3,
+	PNV_PHB_IODA1,
+	PNV_PHB_IODA2,
+	PNV_PHB_NPU_OCAPI,
 };
 
 /* Precise PHB model for error management */
@@ -21,8 +20,6 @@ enum pnv_phb_model {
 	PNV_PHB_MODEL_UNKNOWN,
 	PNV_PHB_MODEL_P7IOC,
 	PNV_PHB_MODEL_PHB3,
-	PNV_PHB_MODEL_NPU,
-	PNV_PHB_MODEL_NPU2,
 };
 
 #define PNV_PCI_DIAG_BUF_SIZE	8192
@@ -81,7 +78,6 @@ struct pnv_ioda_pe {
 
 	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
 	struct iommu_table_group table_group;
-	struct npu_comp		*npucomp;
 
 	/* 64-bit TCE bypass region */
 	bool			tce_bypass_enabled;
@@ -289,9 +285,7 @@ extern struct iommu_table *pnv_pci_table_alloc(int nid);
 
 extern void pnv_pci_init_ioda_hub(struct device_node *np);
 extern void pnv_pci_init_ioda2_phb(struct device_node *np);
-extern void pnv_pci_init_npu_phb(struct device_node *np);
 extern void pnv_pci_init_npu2_opencapi_phb(struct device_node *np);
-extern void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr);
 extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
 extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
 
@@ -314,11 +308,6 @@ extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 #define pe_info(pe, fmt, ...)					\
 	pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)
 
-/* Nvlink functions */
-extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
-extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm);
-extern void pnv_pci_npu_setup_iommu_groups(void);
-
 /* pci-ioda-tce.c */
 #define POWERNV_IOMMU_DEFAULT_LEVELS	2
 #define POWERNV_IOMMU_MAX_LEVELS	5
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 1bffbd1c9a94..3b6800f774c2 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -224,8 +224,6 @@ static void __init pSeries_request_regions(void)
 
 void __init pSeries_final_fixup(void)
 {
-	struct pci_controller *hose;
-
 	pSeries_request_regions();
 
 	eeh_show_enabled();
@@ -234,27 +232,6 @@ void __init pSeries_final_fixup(void)
 	ppc_md.pcibios_sriov_enable = pseries_pcibios_sriov_enable;
 	ppc_md.pcibios_sriov_disable = pseries_pcibios_sriov_disable;
 #endif
-	list_for_each_entry(hose, &hose_list, list_node) {
-		struct device_node *dn = hose->dn, *nvdn;
-
-		while (1) {
-			dn = of_find_all_nodes(dn);
-			if (!dn)
-				break;
-			nvdn = of_parse_phandle(dn, "ibm,nvlink", 0);
-			if (!nvdn)
-				continue;
-			if (!of_device_is_compatible(nvdn, "ibm,npu-link"))
-				continue;
-			if (!of_device_is_compatible(nvdn->parent,
-						"ibm,power9-npu"))
-				continue;
-#ifdef CONFIG_PPC_POWERNV
-			WARN_ON_ONCE(pnv_npu2_init(hose));
-#endif
-			break;
-		}
-	}
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/svm.c b/arch/powerpc/platforms/pseries/svm.c
index 7b739cc7a8a9..1d829e257996 100644
--- a/arch/powerpc/platforms/pseries/svm.c
+++ b/arch/powerpc/platforms/pseries/svm.c
@@ -55,9 +55,9 @@ void __init svm_swiotlb_init(void)
 	if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, false))
 		return;
 
-	if (io_tlb_start)
-		memblock_free_early(io_tlb_start,
-				    PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
+
+	memblock_free_early(__pa(vstart),
+			    PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
 	panic("SVM: Cannot allocate SWIOTLB buffer");
 }