diff options
Diffstat (limited to 'arch/powerpc/platforms/82xx/mpc8272_ads.c')
| -rw-r--r-- | arch/powerpc/platforms/82xx/mpc8272_ads.c | 668 |
1 files changed, 120 insertions, 548 deletions
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c index 4de76dad31b2..fd83440eb287 100644 --- a/arch/powerpc/platforms/82xx/mpc8272_ads.c +++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c @@ -1,9 +1,10 @@ /* - * MPC8272_ads setup and early boot code plus other random bits. + * MPC8272 ADS board support * - * Author: Vitaly Bordug <vbordug@ru.mvista.com> - * m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> * + * Based on code by Vitaly Bordug <vbordug@ru.mvista.com> * Copyright (c) 2006 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it @@ -12,613 +13,184 @@ * option) any later version. */ -#include <linux/stddef.h> -#include <linux/kernel.h> #include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> #include <linux/interrupt.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/module.h> #include <linux/fsl_devices.h> -#include <linux/fs_uart_pd.h> +#include <linux/of_platform.h> +#include <linux/io.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/mpc8260.h> -#include <asm/irq.h> -#include <mm/mmu_decl.h> -#include <asm/prom.h> #include <asm/cpm2.h> #include <asm/udbg.h> -#include <asm/i8259.h> -#include <linux/fs_enet_pd.h> +#include <asm/machdep.h> +#include <asm/time.h> + +#include <platforms/82xx/pq2.h> #include <sysdev/fsl_soc.h> #include <sysdev/cpm2_pic.h> #include "pq2ads.h" - -#ifdef CONFIG_PCI -static uint pci_clk_frq; -static struct { - unsigned long *pci_int_stat_reg; - unsigned long *pci_int_mask_reg; -} pci_regs; - -static unsigned long pci_int_base; -static struct irq_host *pci_pic_host; -#endif +#include "pq2.h" static void __init mpc8272_ads_pic_init(void) { - struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2"); - struct resource r; - cpm2_map_t *cpm_reg; - - if (np == NULL) { - printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); - return; - } - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "PIC init: invalid resource\n"); - of_node_put(np); + struct device_node *np = of_find_compatible_node(NULL, NULL, + "fsl,cpm2-pic"); + if (!np) { + printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); return; } + cpm2_pic_init(np); of_node_put(np); - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t)); - cpm_reg->im_intctl.ic_siprr = 0x05309770; - iounmap(cpm_reg); -#ifdef CONFIG_PCI /* Initialize stuff for the 82xx CPLD IC and install demux */ - m82xx_pci_init_irq(); -#endif + pq2ads_pci_init_irq(); } -static void init_fcc1_ioports(struct fs_platform_info *fpi) -{ - struct io_port *io; - u32 tempval; - cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); - struct device_node *np; - struct resource r; - u32 *bcsr; - - np = of_find_node_by_type(NULL, "memory"); - if (!np) { - printk(KERN_INFO "No memory node in device tree\n"); - return; - } - if (of_address_to_resource(np, 1, &r)) { - printk(KERN_INFO "No memory reg property [1] in devicetree\n"); - return; - } - of_node_put(np); - bcsr = ioremap(r.start + 4, sizeof(u32)); - io = &immap->im_ioport; - - /* Enable the PHY */ - clrbits32(bcsr, BCSR1_FETHIEN); - setbits32(bcsr, BCSR1_FETH_RST); - - /* FCC1 pins are on port A/C. */ - /* Configure port A and C pins for FCC1 Ethernet. */ - - tempval = in_be32(&io->iop_pdira); - tempval &= ~PA1_DIRA0; - tempval |= PA1_DIRA1; - out_be32(&io->iop_pdira, tempval); - - tempval = in_be32(&io->iop_psora); - tempval &= ~PA1_PSORA0; - tempval |= PA1_PSORA1; - out_be32(&io->iop_psora, tempval); - - setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1); - - /* Alter clocks */ - tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8); - - clrbits32(&io->iop_psorc, tempval); - clrbits32(&io->iop_pdirc, tempval); - setbits32(&io->iop_pparc, tempval); - - cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX); +struct cpm_pin { + int port, pin, flags; +}; - iounmap(bcsr); - iounmap(immap); -} +static struct cpm_pin mpc8272_ads_pins[] = { + /* SCC1 */ + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* SCC4 */ + {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC2 */ + {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, +}; -static void init_fcc2_ioports(struct fs_platform_info *fpi) +static void __init init_ioports(void) { - cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); - struct device_node *np; - struct resource r; - u32 *bcsr; - - struct io_port *io; - u32 tempval; - - np = of_find_node_by_type(NULL, "memory"); - if (!np) { - printk(KERN_INFO "No memory node in device tree\n"); - return; - } - if (of_address_to_resource(np, 1, &r)) { - printk(KERN_INFO "No memory reg property [1] in devicetree\n"); - return; - } - of_node_put(np); - io = &immap->im_ioport; - bcsr = ioremap(r.start + 12, sizeof(u32)); - - /* Enable the PHY */ - clrbits32(bcsr, BCSR3_FETHIEN2); - setbits32(bcsr, BCSR3_FETH2_RST); - - /* FCC2 are port B/C. */ - /* Configure port A and C pins for FCC2 Ethernet. */ - - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB2_DIRB0; - tempval |= PB2_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB2_PSORB0; - tempval |= PB2_PSORB1; - out_be32(&io->iop_psorb, tempval); - - setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1); - - tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8); - - /* Alter clocks */ - clrbits32(&io->iop_psorc, tempval); - clrbits32(&io->iop_pdirc, tempval); - setbits32(&io->iop_pparc, tempval); - - cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX); - - iounmap(bcsr); - iounmap(immap); -} + int i; -void init_fcc_ioports(struct fs_platform_info *fpi) -{ - int fcc_no = fs_get_fcc_index(fpi->fs_no); - - switch (fcc_no) { - case 0: - init_fcc1_ioports(fpi); - break; - case 1: - init_fcc2_ioports(fpi); - break; - default: - printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n"); - return; + for (i = 0; i < ARRAY_SIZE(mpc8272_ads_pins); i++) { + struct cpm_pin *pin = &mpc8272_ads_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); } -} -static void init_scc1_uart_ioports(struct fs_uart_platform_info *data) -{ - cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); - - /* SCC1 is only on port D */ - setbits32(&immap->im_ioport.iop_ppard, 0x00000003); - clrbits32(&immap->im_ioport.iop_psord, 0x00000001); - setbits32(&immap->im_ioport.iop_psord, 0x00000002); - clrbits32(&immap->im_ioport.iop_pdird, 0x00000001); - setbits32(&immap->im_ioport.iop_pdird, 0x00000002); - - clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx))); - clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx))); - setbits32(&immap->im_cpmux.cmx_scr, - ((data->clk_tx - 1) << (4 - data->clk_tx))); - setbits32(&immap->im_cpmux.cmx_scr, - ((data->clk_rx - 1) << (4 - data->clk_rx))); - - iounmap(immap); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK15, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK16, CPM_CLK_TX); } -static void init_scc4_uart_ioports(struct fs_uart_platform_info *data) +static void __init mpc8272_ads_setup_arch(void) { - cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); - - setbits32(&immap->im_ioport.iop_ppard, 0x00000600); - clrbits32(&immap->im_ioport.iop_psord, 0x00000600); - clrbits32(&immap->im_ioport.iop_pdird, 0x00000200); - setbits32(&immap->im_ioport.iop_pdird, 0x00000400); - - clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx))); - clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx))); - setbits32(&immap->im_cpmux.cmx_scr, - ((data->clk_tx - 1) << (4 - data->clk_tx))); - setbits32(&immap->im_cpmux.cmx_scr, - ((data->clk_rx - 1) << (4 - data->clk_rx))); - - iounmap(immap); -} + struct device_node *np; + __be32 __iomem *bcsr; -void init_scc_ioports(struct fs_uart_platform_info *data) -{ - int scc_no = fs_get_scc_index(data->fs_no); - - switch (scc_no) { - case 0: - init_scc1_uart_ioports(data); - data->brg = data->clk_rx; - break; - case 3: - init_scc4_uart_ioports(data); - data->brg = data->clk_rx; - break; - default: - printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); - return; - } -} + if (ppc_md.progress) + ppc_md.progress("mpc8272_ads_setup_arch()", 0); -void __init m82xx_board_setup(void) -{ - cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); - struct device_node *np; - struct resource r; - u32 *bcsr; + cpm2_reset(); - np = of_find_node_by_type(NULL, "memory"); + np = of_find_compatible_node(NULL, NULL, "fsl,mpc8272ads-bcsr"); if (!np) { - printk(KERN_INFO "No memory node in device tree\n"); + printk(KERN_ERR "No bcsr in device tree\n"); return; } - if (of_address_to_resource(np, 1, &r)) { - printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + + bcsr = of_iomap(np, 0); + if (!bcsr) { + printk(KERN_ERR "Cannot map BCSR registers\n"); return; } - of_node_put(np); - bcsr = ioremap(r.start + 4, sizeof(u32)); - /* Enable the 2nd UART port */ - clrbits32(bcsr, BCSR1_RS232_EN2); - -#ifdef CONFIG_SERIAL_CPM_SCC1 - clrbits32((u32 *) & immap->im_scc[0].scc_sccm, - UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl, - SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC2 - clrbits32((u32 *) & immap->im_scc[1].scc_sccm, - UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl, - SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC3 - clrbits32((u32 *) & immap->im_scc[2].scc_sccm, - UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl, - SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC4 - clrbits32((u32 *) & immap->im_scc[3].scc_sccm, - UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl, - SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - - iounmap(bcsr); - iounmap(immap); -} - -#ifdef CONFIG_PCI -static void m82xx_pci_mask_irq(unsigned int irq) -{ - int bit = irq - pci_int_base; - *pci_regs.pci_int_mask_reg |= (1 << (31 - bit)); - return; -} + of_node_put(np); -static void m82xx_pci_unmask_irq(unsigned int irq) -{ - int bit = irq - pci_int_base; + clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN); + setbits32(&bcsr[1], BCSR1_FETH_RST); - *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit)); - return; -} + clrbits32(&bcsr[3], BCSR3_FETHIEN2); + setbits32(&bcsr[3], BCSR3_FETH2_RST); -static void m82xx_pci_mask_and_ack(unsigned int irq) -{ - int bit = irq - pci_int_base; - - *pci_regs.pci_int_mask_reg |= (1 << (31 - bit)); - return; -} + iounmap(bcsr); -static void m82xx_pci_end_irq(unsigned int irq) -{ - int bit = irq - pci_int_base; + init_ioports(); + pq2_init_pci(); - *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit)); - return; + if (ppc_md.progress) + ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0); } -struct hw_interrupt_type m82xx_pci_ic = { - .typename = "MPC82xx ADS PCI", - .name = "MPC82xx ADS PCI", - .enable = m82xx_pci_unmask_irq, - .disable = m82xx_pci_mask_irq, - .ack = m82xx_pci_mask_and_ack, - .end = m82xx_pci_end_irq, - .mask = m82xx_pci_mask_irq, - .mask_ack = m82xx_pci_mask_and_ack, - .unmask = m82xx_pci_unmask_irq, - .eoi = m82xx_pci_end_irq, +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, }; -static void -m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc) +static int __init declare_of_platform_devices(void) { - unsigned long stat, mask, pend; - int bit; - - for (;;) { - stat = *pci_regs.pci_int_stat_reg; - mask = *pci_regs.pci_int_mask_reg; - pend = stat & ~mask & 0xf0000000; - if (!pend) - break; - for (bit = 0; pend != 0; ++bit, pend <<= 1) { - if (pend & 0x80000000) - __do_IRQ(pci_int_base + bit); - } - } -} + if (!machine_is(mpc8272_ads)) + return 0; -static int pci_pic_host_map(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw) -{ - get_irq_desc(virq)->status |= IRQ_LEVEL; - set_irq_chip(virq, &m82xx_pci_ic); + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); return 0; } - -static void pci_host_unmap(struct irq_host *h, unsigned int virq) -{ - /* remove chip and handler */ - set_irq_chip(virq, NULL); -} - -static struct irq_host_ops pci_pic_host_ops = { - .map = pci_pic_host_map, - .unmap = pci_host_unmap, -}; - -void m82xx_pci_init_irq(void) -{ - int irq; - cpm2_map_t *immap; - struct device_node *np; - struct resource r; - const u32 *regs; - unsigned int size; - const u32 *irq_map; - int i; - unsigned int irq_max, irq_min; - - if ((np = of_find_node_by_type(NULL, "soc")) == NULL) { - printk(KERN_INFO "No SOC node in device tree\n"); - return; - } - memset(&r, 0, sizeof(r)); - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_INFO "No SOC reg property in device tree\n"); - return; - } - immap = ioremap(r.start, sizeof(*immap)); - of_node_put(np); - - /* install the demultiplexer for the PCI cascade interrupt */ - np = of_find_node_by_type(NULL, "pci"); - if (!np) { - printk(KERN_INFO "No pci node on device tree\n"); - iounmap(immap); - return; - } - irq_map = of_get_property(np, "interrupt-map", &size); - if ((!irq_map) || (size <= 7)) { - printk(KERN_INFO "No interrupt-map property of pci node\n"); - iounmap(immap); - return; - } - size /= sizeof(irq_map[0]); - for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) { - if (irq_map[5] < irq_min) - irq_min = irq_map[5]; - if (irq_map[5] > irq_max) - irq_max = irq_map[5]; - } - pci_int_base = irq_min; - irq = irq_of_parse_and_map(np, 0); - set_irq_chained_handler(irq, m82xx_pci_irq_demux); - of_node_put(np); - np = of_find_node_by_type(NULL, "pci-pic"); - if (!np) { - printk(KERN_INFO "No pci pic node on device tree\n"); - iounmap(immap); - return; - } - /* PCI interrupt controller registers: status and mask */ - regs = of_get_property(np, "reg", &size); - if ((!regs) || (size <= 2)) { - printk(KERN_INFO "No reg property in pci pic node\n"); - iounmap(immap); - return; - } - pci_regs.pci_int_stat_reg = - ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg)); - pci_regs.pci_int_mask_reg = - ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg)); - /* configure chip select for PCI interrupt controller */ - immap->im_memctl.memc_br3 = regs[0] | 0x00001801; - immap->im_memctl.memc_or3 = 0xffff8010; - /* make PCI IRQ level sensitive */ - immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1))); - - /* mask all PCI interrupts */ - *pci_regs.pci_int_mask_reg |= 0xfff00000; - iounmap(immap); - pci_pic_host = - irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1, - &pci_pic_host_ops, irq_max + 1); - return; -} - -static int m82xx_pci_exclude_device(struct pci_controller *hose, - u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -static void __init mpc82xx_add_bridge(struct device_node *np) -{ - int len; - struct pci_controller *hose; - struct resource r; - const int *bus_range; - const uint *ptr; - - memset(&r, 0, sizeof(r)); - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_INFO "No PCI reg property in device tree\n"); - return; - } - if (!(ptr = of_get_property(np, "clock-frequency", NULL))) { - printk(KERN_INFO "No clock-frequency property in PCI node"); - return; - } - pci_clk_frq = *ptr; - of_node_put(np); - bus_range = of_get_property(np, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume" - " bus 0\n", np->full_name); - } - - pci_assign_all_buses = 1; - - hose = pcibios_alloc_controller(np); - - if (!hose) - return; - - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - setup_indirect_pci(hose, - r.start + offsetof(pci_cpm2_t, pci_cfg_addr), - r.start + offsetof(pci_cpm2_t, pci_cfg_data), - 0); - - pci_process_bridge_OF_ranges(hose, np, 1); -} -#endif - -/* - * Setup the architecture - */ -static void __init mpc8272_ads_setup_arch(void) -{ -#ifdef CONFIG_PCI - struct device_node *np; -#endif - - if (ppc_md.progress) - ppc_md.progress("mpc8272_ads_setup_arch()", 0); - cpm2_reset(); - - /* Map I/O region to a 256MB BAT */ - - m82xx_board_setup(); - -#ifdef CONFIG_PCI - ppc_md.pci_exclude_device = m82xx_pci_exclude_device; - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - mpc82xx_add_bridge(np); - - of_node_put(np); -#endif - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - - if (ppc_md.progress) - ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0); -} +device_initcall(declare_of_platform_devices); /* * Called very early, device-tree isn't unflattened */ static int __init mpc8272_ads_probe(void) { - /* We always match for now, eventually we should look at - * the flat dev tree to ensure this is the board we are - * supposed to run on - */ - return 1; -} - -#define RMR_CSRE 0x00000001 -static void m82xx_restart(char *cmd) -{ - __volatile__ unsigned char dummy; - - local_irq_disable(); - ((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE; - - /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */ - mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR)); - dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0]; - printk("Restart failed\n"); - while (1) ; + unsigned long root = of_get_flat_dt_root(); + return of_flat_dt_is_compatible(root, "fsl,mpc8272ads"); } define_machine(mpc8272_ads) { - .name = "MPC8272 ADS", - .probe = mpc8272_ads_probe, - .setup_arch = mpc8272_ads_setup_arch, - .init_IRQ = mpc8272_ads_pic_init, - .get_irq = cpm2_get_irq, + .name = "Freescale MPC8272 ADS", + .probe = mpc8272_ads_probe, + .setup_arch = mpc8272_ads_setup_arch, + .init_IRQ = mpc8272_ads_pic_init, + .get_irq = cpm2_get_irq, .calibrate_decr = generic_calibrate_decr, - .restart = m82xx_restart, + .restart = pq2_restart, + .progress = udbg_progress, }; |