1 files changed, 152 insertions, 68 deletions
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index a3a03da503bc..3e18241b6f35 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -18,61 +18,28 @@
 
 #include <linux/config.h>
 #include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
 
-/* void slb_allocate(unsigned long ea);
+/* void slb_allocate_realmode(unsigned long ea);
  *
  * Create an SLB entry for the given EA (user or kernel).
  * 	r3 = faulting address, r13 = PACA
  *	r9, r10, r11 are clobbered by this function
  * No other registers are examined or changed.
  */
-_GLOBAL(slb_allocate)
-	/*
-	 * First find a slot, round robin. Previously we tried to find
-	 * a free slot first but that took too long. Unfortunately we
-	 * dont have any LRU information to help us choose a slot.
-	 */
-#ifdef CONFIG_PPC_ISERIES
-	/*
-	 * On iSeries, the "bolted" stack segment can be cast out on
-	 * shared processor switch so we need to check for a miss on
-	 * it and restore it to the right slot.
-	 */
-	ld	r9,PACAKSAVE(r13)
-	clrrdi	r9,r9,28
-	clrrdi	r11,r3,28
-	li	r10,SLB_NUM_BOLTED-1	/* Stack goes in last bolted slot */
-	cmpld	r9,r11
-	beq	3f
-#endif /* CONFIG_PPC_ISERIES */
-
-	ld	r10,PACASTABRR(r13)
-	addi	r10,r10,1
-	/* use a cpu feature mask if we ever change our slb size */
-	cmpldi	r10,SLB_NUM_ENTRIES
-
-	blt+	4f
-	li	r10,SLB_NUM_BOLTED
-
-4:
-	std	r10,PACASTABRR(r13)
-3:
-	/* r3 = faulting address, r10 = entry */
+_GLOBAL(slb_allocate_realmode)
+	/* r3 = faulting address */
 
 	srdi	r9,r3,60		/* get region */
-	srdi	r3,r3,28		/* get esid */
+	srdi	r10,r3,28		/* get esid */
 	cmpldi	cr7,r9,0xc		/* cmp KERNELBASE for later use */
 
-	rldimi	r10,r3,28,0		/* r10= ESID<<28 | entry */
-	oris	r10,r10,SLB_ESID_V@h	/* r10 |= SLB_ESID_V */
-
-	/* r3 = esid, r10 = esid_data, cr7 = <>KERNELBASE */
-
+	/* r3 = address, r10 = esid, cr7 = <>KERNELBASE */
 	blt	cr7,0f			/* user or kernel? */
 
 	/* kernel address: proto-VSID = ESID */
@@ -81,43 +48,161 @@ _GLOBAL(slb_allocate)
 	 * top segment.  That's ok, the scramble below will translate
 	 * it to VSID 0, which is reserved as a bad VSID - one which
 	 * will never have any pages in it.  */
-	li	r11,SLB_VSID_KERNEL
-BEGIN_FTR_SECTION
-	bne	cr7,9f
-	li	r11,(SLB_VSID_KERNEL|SLB_VSID_L)
-END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
-	b	9f
 
-0:	/* user address: proto-VSID = context<<15 | ESID */
-	srdi.	r9,r3,USER_ESID_BITS
+	/* Check if hitting the linear mapping of the vmalloc/ioremap
+	 * kernel space
+	*/
+	bne	cr7,1f
+
+	/* Linear mapping encoding bits, the "li" instruction below will
+	 * be patched by the kernel at boot
+	 */
+_GLOBAL(slb_miss_kernel_load_linear)
+	li	r11,0
+	b	slb_finish_load
+
+1:	/* vmalloc/ioremap mapping encoding bits, the "li" instruction below
+	 * will be patched by the kernel at boot
+	 */
+_GLOBAL(slb_miss_kernel_load_virtual)
+	li	r11,0
+	b	slb_finish_load
+
+
+0:	/* user address: proto-VSID = context << 15 | ESID. First check
+	 * if the address is within the boundaries of the user region
+	 */
+	srdi.	r9,r10,USER_ESID_BITS
 	bne-	8f			/* invalid ea bits set */
 
+	/* Figure out if the segment contains huge pages */
 #ifdef CONFIG_HUGETLB_PAGE
 BEGIN_FTR_SECTION
+	b	1f
+END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE)
 	lhz	r9,PACAHIGHHTLBAREAS(r13)
-	srdi	r11,r3,(HTLB_AREA_SHIFT-SID_SHIFT)
+	srdi	r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT)
 	srd	r9,r9,r11
 	lhz	r11,PACALOWHTLBAREAS(r13)
-	srd	r11,r11,r3
-	or	r9,r9,r11
-END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
+	srd	r11,r11,r10
+	or.	r9,r9,r11
+	beq	1f
+_GLOBAL(slb_miss_user_load_huge)
+	li	r11,0
+	b	2f
+1:
 #endif /* CONFIG_HUGETLB_PAGE */
 
-	li	r11,SLB_VSID_USER
+_GLOBAL(slb_miss_user_load_normal)
+	li	r11,0
 
-#ifdef CONFIG_HUGETLB_PAGE
-BEGIN_FTR_SECTION
-	rldimi	r11,r9,8,55		/* shift masked bit into SLB_VSID_L */
-END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
-#endif /* CONFIG_HUGETLB_PAGE */
+2:
+	ld	r9,PACACONTEXTID(r13)
+	rldimi	r10,r9,USER_ESID_BITS,0
+	b	slb_finish_load
+
+8:	/* invalid EA */
+	li	r10,0			/* BAD_VSID */
+	li	r11,SLB_VSID_USER	/* flags don't much matter */
+	b	slb_finish_load
+
+#ifdef __DISABLED__
+
+/* void slb_allocate_user(unsigned long ea);
+ *
+ * Create an SLB entry for the given EA (user or kernel).
+ * 	r3 = faulting address, r13 = PACA
+ *	r9, r10, r11 are clobbered by this function
+ * No other registers are examined or changed.
+ *
+ * It is called with translation enabled in order to be able to walk the
+ * page tables. This is not currently used.
+ */
+_GLOBAL(slb_allocate_user)
+	/* r3 = faulting address */
+	srdi	r10,r3,28		/* get esid */
+
+	crset	4*cr7+lt		/* set "user" flag for later */
+
+	/* check if we fit in the range covered by the pagetables*/
+	srdi.	r9,r3,PGTABLE_EADDR_SIZE
+	crnot	4*cr0+eq,4*cr0+eq
+	beqlr
 
+	/* now we need to get to the page tables in order to get the page
+	 * size encoding from the PMD. In the future, we'll be able to deal
+	 * with 1T segments too by getting the encoding from the PGD instead
+	 */
+	ld	r9,PACAPGDIR(r13)
+	cmpldi	cr0,r9,0
+	beqlr
+	rlwinm	r11,r10,8,25,28
+	ldx	r9,r9,r11		/* get pgd_t */
+	cmpldi	cr0,r9,0
+	beqlr
+	rlwinm	r11,r10,3,17,28
+	ldx	r9,r9,r11		/* get pmd_t */
+	cmpldi	cr0,r9,0
+	beqlr
+
+	/* build vsid flags */
+	andi.	r11,r9,SLB_VSID_LLP
+	ori	r11,r11,SLB_VSID_USER
+
+	/* get context to calculate proto-VSID */
 	ld	r9,PACACONTEXTID(r13)
-	rldimi	r3,r9,USER_ESID_BITS,0
+	rldimi	r10,r9,USER_ESID_BITS,0
+
+	/* fall through slb_finish_load */
+
+#endif /* __DISABLED__ */
 
-9:	/* r3 = protovsid, r11 = flags, r10 = esid_data, cr7 = <>KERNELBASE */
-	ASM_VSID_SCRAMBLE(r3,r9)
 
-	rldimi	r11,r3,SLB_VSID_SHIFT,16	/* combine VSID and flags */
+/*
+ * Finish loading of an SLB entry and return
+ *
+ * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <>KERNELBASE
+ */
+slb_finish_load:
+	ASM_VSID_SCRAMBLE(r10,r9)
+	rldimi	r11,r10,SLB_VSID_SHIFT,16	/* combine VSID and flags */
+
+	/* r3 = EA, r11 = VSID data */
+	/*
+	 * Find a slot, round robin. Previously we tried to find a
+	 * free slot first but that took too long. Unfortunately we
+ 	 * dont have any LRU information to help us choose a slot.
+ 	 */
+#ifdef CONFIG_PPC_ISERIES
+	/*
+	 * On iSeries, the "bolted" stack segment can be cast out on
+	 * shared processor switch so we need to check for a miss on
+	 * it and restore it to the right slot.
+	 */
+	ld	r9,PACAKSAVE(r13)
+	clrrdi	r9,r9,28
+	clrrdi	r3,r3,28
+	li	r10,SLB_NUM_BOLTED-1	/* Stack goes in last bolted slot */
+	cmpld	r9,r3
+	beq	3f
+#endif /* CONFIG_PPC_ISERIES */
+
+	ld	r10,PACASTABRR(r13)
+	addi	r10,r10,1
+	/* use a cpu feature mask if we ever change our slb size */
+	cmpldi	r10,SLB_NUM_ENTRIES
+
+	blt+	4f
+	li	r10,SLB_NUM_BOLTED
+
+4:
+	std	r10,PACASTABRR(r13)
+
+3:
+	rldimi	r3,r10,0,36		/* r3= EA[0:35] | entry */
+	oris	r10,r3,SLB_ESID_V@h	/* r3 |= SLB_ESID_V */
+
+	/* r3 = ESID data, r11 = VSID data */
 
 	/*
 	 * No need for an isync before or after this slbmte. The exception
@@ -125,7 +210,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
 	 */
 	slbmte	r11,r10
 
-	bgelr	cr7			/* we're done for kernel addresses */
+	/* we're done for kernel addresses */
+	crclr	4*cr0+eq		/* set result to "success" */
+	bgelr	cr7
 
 	/* Update the slb cache */
 	lhz	r3,PACASLBCACHEPTR(r13)	/* offset = paca->slb_cache_ptr */
@@ -143,9 +230,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
 	li	r3,SLB_CACHE_ENTRIES+1
 2:
 	sth	r3,PACASLBCACHEPTR(r13)	/* paca->slb_cache_ptr = offset */
+	crclr	4*cr0+eq		/* set result to "success" */
 	blr
 
-8:	/* invalid EA */
-	li	r3,0			/* BAD_VSID */
-	li	r11,SLB_VSID_USER	/* flags don't much matter */
-	b	9b