diff options
Diffstat (limited to 'arch/powerpc/kernel/head_book3s_32.S')
| -rw-r--r-- | arch/powerpc/kernel/head_book3s_32.S | 1366 |
1 files changed, 1366 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S new file mode 100644 index 000000000000..b7b554533e0d --- /dev/null +++ b/arch/powerpc/kernel/head_book3s_32.S @@ -0,0 +1,1366 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). + * + * This file contains the low-level support and setup for the + * PowerPC platform, including trap and interrupt dispatch. + * (The PPC 8xx embedded CPUs use head_8xx.S instead.) + */ + +#include <linux/init.h> +#include <linux/pgtable.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/cputable.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/ptrace.h> +#include <asm/bug.h> +#include <asm/kvm_book3s_asm.h> +#include <asm/export.h> +#include <asm/feature-fixups.h> + +#include "head_32.h" + +#define LOAD_BAT(n, reg, RA, RB) \ + /* see the comment for clear_bats() -- Cort */ \ + li RA,0; \ + mtspr SPRN_IBAT##n##U,RA; \ + mtspr SPRN_DBAT##n##U,RA; \ + lwz RA,(n*16)+0(reg); \ + lwz RB,(n*16)+4(reg); \ + mtspr SPRN_IBAT##n##U,RA; \ + mtspr SPRN_IBAT##n##L,RB; \ + lwz RA,(n*16)+8(reg); \ + lwz RB,(n*16)+12(reg); \ + mtspr SPRN_DBAT##n##U,RA; \ + mtspr SPRN_DBAT##n##L,RB + + __HEAD + .stabs "arch/powerpc/kernel/",N_SO,0,0,0f + .stabs "head_book3s_32.S",N_SO,0,0,0f +0: +_ENTRY(_stext); + +/* + * _start is defined this way because the XCOFF loader in the OpenFirmware + * on the powermac expects the entry point to be a procedure descriptor. + */ +_ENTRY(_start); + /* + * These are here for legacy reasons, the kernel used to + * need to look like a coff function entry for the pmac + * but we're always started by some kind of bootloader now. + * -- Cort + */ + nop /* used by __secondary_hold on prep (mtx) and chrp smp */ + nop /* used by __secondary_hold on prep (mtx) and chrp smp */ + nop + +/* PMAC + * Enter here with the kernel text, data and bss loaded starting at + * 0, running with virtual == physical mapping. + * r5 points to the prom entry point (the client interface handler + * address). Address translation is turned on, with the prom + * managing the hash table. Interrupts are disabled. The stack + * pointer (r1) points to just below the end of the half-meg region + * from 0x380000 - 0x400000, which is mapped in already. + * + * If we are booted from MacOS via BootX, we enter with the kernel + * image loaded somewhere, and the following values in registers: + * r3: 'BooX' (0x426f6f58) + * r4: virtual address of boot_infos_t + * r5: 0 + * + * PREP + * This is jumped to on prep systems right after the kernel is relocated + * to its proper place in memory by the boot loader. The expected layout + * of the regs is: + * r3: ptr to residual data + * r4: initrd_start or if no initrd then 0 + * r5: initrd_end - unused if r4 is 0 + * r6: Start of command line string + * r7: End of command line string + * + * This just gets a minimal mmu environment setup so we can call + * start_here() to do the real work. + * -- Cort + */ + + .globl __start +__start: +/* + * We have to do any OF calls before we map ourselves to KERNELBASE, + * because OF may have I/O devices mapped into that area + * (particularly on CHRP). + */ + cmpwi 0,r5,0 + beq 1f + +#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE + /* find out where we are now */ + bcl 20,31,$+4 +0: mflr r8 /* r8 = runtime addr here */ + addis r8,r8,(_stext - 0b)@ha + addi r8,r8,(_stext - 0b)@l /* current runtime base addr */ + bl prom_init +#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */ + + /* We never return. We also hit that trap if trying to boot + * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */ + trap + +/* + * Check for BootX signature when supporting PowerMac and branch to + * appropriate trampoline if it's present + */ +#ifdef CONFIG_PPC_PMAC +1: lis r31,0x426f + ori r31,r31,0x6f58 + cmpw 0,r3,r31 + bne 1f + bl bootx_init + trap +#endif /* CONFIG_PPC_PMAC */ + +1: mr r31,r3 /* save device tree ptr */ + li r24,0 /* cpu # */ + +/* + * early_init() does the early machine identification and does + * the necessary low-level setup and clears the BSS + * -- Cort <cort@fsmlabs.com> + */ + bl early_init + +/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains + * the physical address we are running at, returned by early_init() + */ + bl mmu_off +__after_mmu_off: + bl clear_bats + bl flush_tlbs + + bl initial_bats + bl load_segment_registers +BEGIN_MMU_FTR_SECTION + bl early_hash_table +END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) +#if defined(CONFIG_BOOTX_TEXT) + bl setup_disp_bat +#endif +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + bl setup_cpm_bat +#endif +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + bl setup_usbgecko_bat +#endif + +/* + * Call setup_cpu for CPU 0 and initialize 6xx Idle + */ + bl reloc_offset + li r24,0 /* cpu# */ + bl call_setup_cpu /* Call setup_cpu for this CPU */ +#ifdef CONFIG_PPC_BOOK3S_32 + bl reloc_offset + bl init_idle_6xx +#endif /* CONFIG_PPC_BOOK3S_32 */ + + +/* + * We need to run with _start at physical address 0. + * On CHRP, we are loaded at 0x10000 since OF on CHRP uses + * the exception vectors at 0 (and therefore this copy + * overwrites OF's exception vectors with our own). + * The MMU is off at this point. + */ + bl reloc_offset + mr r26,r3 + addis r4,r3,KERNELBASE@h /* current address of _start */ + lis r5,PHYSICAL_START@h + cmplw 0,r4,r5 /* already running at PHYSICAL_START? */ + bne relocate_kernel +/* + * we now have the 1st 16M of ram mapped with the bats. + * prep needs the mmu to be turned on here, but pmac already has it on. + * this shouldn't bother the pmac since it just gets turned on again + * as we jump to our code at KERNELBASE. -- Cort + * Actually no, pmac doesn't have it on any more. BootX enters with MMU + * off, and in other cases, we now turn it off before changing BATs above. + */ +turn_on_mmu: + mfmsr r0 + ori r0,r0,MSR_DR|MSR_IR|MSR_RI + mtspr SPRN_SRR1,r0 + lis r0,start_here@h + ori r0,r0,start_here@l + mtspr SPRN_SRR0,r0 + RFI /* enables MMU */ + +/* + * We need __secondary_hold as a place to hold the other cpus on + * an SMP machine, even when we are running a UP kernel. + */ + . = 0xc0 /* for prep bootloader */ + li r3,1 /* MTX only has 1 cpu */ + .globl __secondary_hold +__secondary_hold: + /* tell the master we're here */ + stw r3,__secondary_hold_acknowledge@l(0) +#ifdef CONFIG_SMP +100: lwz r4,0(0) + /* wait until we're told to start */ + cmpw 0,r4,r3 + bne 100b + /* our cpu # was at addr 0 - go */ + mr r24,r3 /* cpu # */ + b __secondary_start +#else + b . +#endif /* CONFIG_SMP */ + + .globl __secondary_hold_spinloop +__secondary_hold_spinloop: + .long 0 + .globl __secondary_hold_acknowledge +__secondary_hold_acknowledge: + .long -1 + +/* System reset */ +/* core99 pmac starts the seconary here by changing the vector, and + putting it back to what it was (unknown_exception) when done. */ + EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) + +/* Machine check */ +/* + * On CHRP, this is complicated by the fact that we could get a + * machine check inside RTAS, and we have no guarantee that certain + * critical registers will have the values we expect. The set of + * registers that might have bad values includes all the GPRs + * and all the BATs. We indicate that we are in RTAS by putting + * a non-zero value, the address of the exception frame to use, + * in thread.rtas_sp. The machine check handler checks thread.rtas_sp + * and uses its value if it is non-zero. + * (Other exception handlers assume that r1 is a valid kernel stack + * pointer when we take an exception from supervisor mode.) + * -- paulus. + */ + . = 0x200 + DO_KVM 0x200 +MachineCheck: + EXCEPTION_PROLOG_0 +#ifdef CONFIG_PPC_CHRP + mfspr r11, SPRN_SPRG_THREAD + lwz r11, RTAS_SP(r11) + cmpwi cr1, r11, 0 + bne cr1, 7f +#endif /* CONFIG_PPC_CHRP */ + EXCEPTION_PROLOG_1 for_rtas=1 +7: EXCEPTION_PROLOG_2 + addi r3,r1,STACK_FRAME_OVERHEAD +#ifdef CONFIG_PPC_CHRP +#ifdef CONFIG_VMAP_STACK + mfspr r4, SPRN_SPRG_THREAD + tovirt(r4, r4) + lwz r4, RTAS_SP(r4) + cmpwi cr1, r4, 0 +#endif + beq cr1, machine_check_tramp + twi 31, 0, 0 +#else + b machine_check_tramp +#endif + +/* Data access exception. */ + . = 0x300 + DO_KVM 0x300 +DataAccess: +#ifdef CONFIG_VMAP_STACK + mtspr SPRN_SPRG_SCRATCH0,r10 + mfspr r10, SPRN_SPRG_THREAD +BEGIN_MMU_FTR_SECTION + stw r11, THR11(r10) + mfspr r10, SPRN_DSISR + mfcr r11 +#ifdef CONFIG_PPC_KUAP + andis. r10, r10, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h +#else + andis. r10, r10, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH)@h +#endif + mfspr r10, SPRN_SPRG_THREAD + beq hash_page_dsi +.Lhash_page_dsi_cont: + mtcr r11 + lwz r11, THR11(r10) +END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) + mtspr SPRN_SPRG_SCRATCH1,r11 + mfspr r11, SPRN_DAR + stw r11, DAR(r10) + mfspr r11, SPRN_DSISR + stw r11, DSISR(r10) + mfspr r11, SPRN_SRR0 + stw r11, SRR0(r10) + mfspr r11, SPRN_SRR1 /* check whether user or kernel */ + stw r11, SRR1(r10) + mfcr r10 + andi. r11, r11, MSR_PR + + EXCEPTION_PROLOG_1 + b handle_page_fault_tramp_1 +#else /* CONFIG_VMAP_STACK */ + EXCEPTION_PROLOG handle_dar_dsisr=1 + get_and_save_dar_dsisr_on_stack r4, r5, r11 +BEGIN_MMU_FTR_SECTION +#ifdef CONFIG_PPC_KUAP + andis. r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h +#else + andis. r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH)@h +#endif + bne handle_page_fault_tramp_2 /* if not, try to put a PTE */ + rlwinm r3, r5, 32 - 15, 21, 21 /* DSISR_STORE -> _PAGE_RW */ + bl hash_page + b handle_page_fault_tramp_1 +FTR_SECTION_ELSE + b handle_page_fault_tramp_2 +ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_HPTE_TABLE) +#endif /* CONFIG_VMAP_STACK */ + +/* Instruction access exception. */ + . = 0x400 + DO_KVM 0x400 +InstructionAccess: +#ifdef CONFIG_VMAP_STACK + mtspr SPRN_SPRG_SCRATCH0,r10 + mtspr SPRN_SPRG_SCRATCH1,r11 + mfspr r10, SPRN_SPRG_THREAD + mfspr r11, SPRN_SRR0 + stw r11, SRR0(r10) + mfspr r11, SPRN_SRR1 /* check whether user or kernel */ + stw r11, SRR1(r10) + mfcr r10 +BEGIN_MMU_FTR_SECTION + andis. r11, r11, SRR1_ISI_NOPT@h /* no pte found? */ + bne hash_page_isi +.Lhash_page_isi_cont: + mfspr r11, SPRN_SRR1 /* check whether user or kernel */ +END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) + andi. r11, r11, MSR_PR + + EXCEPTION_PROLOG_1 + EXCEPTION_PROLOG_2 +#else /* CONFIG_VMAP_STACK */ + EXCEPTION_PROLOG + andis. r0,r9,SRR1_ISI_NOPT@h /* no pte found? */ + beq 1f /* if so, try to put a PTE */ + li r3,0 /* into the hash table */ + mr r4,r12 /* SRR0 is fault address */ +BEGIN_MMU_FTR_SECTION + bl hash_page +END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE) +#endif /* CONFIG_VMAP_STACK */ +1: mr r4,r12 + andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */ + stw r4, _DAR(r11) + EXC_XFER_LITE(0x400, handle_page_fault) + +/* External interrupt */ + EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) + +/* Alignment exception */ + . = 0x600 + DO_KVM 0x600 +Alignment: + EXCEPTION_PROLOG handle_dar_dsisr=1 + save_dar_dsisr_on_stack r4, r5, r11 + addi r3,r1,STACK_FRAME_OVERHEAD + b alignment_exception_tramp + +/* Program check exception */ + EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD) + +/* Floating-point unavailable */ + . = 0x800 + DO_KVM 0x800 +FPUnavailable: +BEGIN_FTR_SECTION +/* + * Certain Freescale cores don't have a FPU and treat fp instructions + * as a FP Unavailable exception. Redirect to illegal/emulation handling. + */ + b ProgramCheck +END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE) + EXCEPTION_PROLOG + beq 1f + bl load_up_fpu /* if from user, just load it up */ + b fast_exception_return +1: addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_LITE(0x800, kernel_fp_unavailable_exception) + +/* Decrementer */ + EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE) + + EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_STD) + EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_STD) + +/* System call */ + . = 0xc00 + DO_KVM 0xc00 +SystemCall: + SYSCALL_ENTRY 0xc00 + + EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD) + EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_STD) + +/* + * The Altivec unavailable trap is at 0x0f20. Foo. + * We effectively remap it to 0x3000. + * We include an altivec unavailable exception vector even if + * not configured for Altivec, so that you can't panic a + * non-altivec kernel running on a machine with altivec just + * by executing an altivec instruction. + */ + . = 0xf00 + DO_KVM 0xf00 + b PerformanceMonitor + + . = 0xf20 + DO_KVM 0xf20 + b AltiVecUnavailable + +/* + * Handle TLB miss for instruction on 603/603e. + * Note: we get an alternate set of r0 - r3 to use automatically. + */ + . = 0x1000 +InstructionTLBMiss: +/* + * r0: scratch + * r1: linux style pte ( later becomes ppc hardware pte ) + * r2: ptr to linux-style pte + * r3: scratch + */ + /* Get PTE (linux-style) and check access */ + mfspr r3,SPRN_IMISS +#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) + lis r1, TASK_SIZE@h /* check if kernel address */ + cmplw 0,r1,r3 +#endif + mfspr r2, SPRN_SPRG_PGDIR +#ifdef CONFIG_SWAP + li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC +#else + li r1,_PAGE_PRESENT | _PAGE_EXEC +#endif +#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) + bgt- 112f + lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ + addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */ +#endif +112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ + lwz r2,0(r2) /* get pmd entry */ + rlwinm. r2,r2,0,0,19 /* extract address of pte page */ + beq- InstructionAddressInvalid /* return if no mapping */ + rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ + lwz r0,0(r2) /* get linux-style pte */ + andc. r1,r1,r0 /* check access & ~permission */ + bne- InstructionAddressInvalid /* return if access not permitted */ + /* Convert linux-style PTE to low word of PPC-style PTE */ + rlwimi r0,r0,32-2,31,31 /* _PAGE_USER -> PP lsb */ + ori r1, r1, 0xe06 /* clear out reserved bits */ + andc r1, r0, r1 /* PP = user? 1 : 0 */ +BEGIN_FTR_SECTION + rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */ +END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) + mtspr SPRN_RPA,r1 + tlbli r3 + mfspr r3,SPRN_SRR1 /* Need to restore CR0 */ + mtcrf 0x80,r3 + rfi +InstructionAddressInvalid: + mfspr r3,SPRN_SRR1 + rlwinm r1,r3,9,6,6 /* Get load/store bit */ + + addis r1,r1,0x2000 + mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */ + andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */ + or r2,r2,r1 + mtspr SPRN_SRR1,r2 + mfspr r1,SPRN_IMISS /* Get failing address */ + rlwinm. r2,r2,0,31,31 /* Check for little endian access */ + rlwimi r2,r2,1,30,30 /* change 1 -> 3 */ + xor r1,r1,r2 + mtspr SPRN_DAR,r1 /* Set fault address */ + mfmsr r0 /* Restore "normal" registers */ + xoris r0,r0,MSR_TGPR>>16 + mtcrf 0x80,r3 /* Restore CR0 */ + mtmsr r0 + b InstructionAccess + +/* + * Handle TLB miss for DATA Load operation on 603/603e + */ + . = 0x1100 +DataLoadTLBMiss: +/* + * r0: scratch + * r1: linux style pte ( later becomes ppc hardware pte ) + * r2: ptr to linux-style pte + * r3: scratch + */ + /* Get PTE (linux-style) and check access */ + mfspr r3,SPRN_DMISS + lis r1, TASK_SIZE@h /* check if kernel address */ + cmplw 0,r1,r3 + mfspr r2, SPRN_SPRG_PGDIR +#ifdef CONFIG_SWAP + li r1, _PAGE_PRESENT | _PAGE_ACCESSED +#else + li r1, _PAGE_PRESENT +#endif + bgt- 112f + lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ + addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */ +112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ + lwz r2,0(r2) /* get pmd entry */ + rlwinm. r2,r2,0,0,19 /* extract address of pte page */ + beq- DataAddressInvalid /* return if no mapping */ + rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ + lwz r0,0(r2) /* get linux-style pte */ + andc. r1,r1,r0 /* check access & ~permission */ + bne- DataAddressInvalid /* return if access not permitted */ + /* + * NOTE! We are assuming this is not an SMP system, otherwise + * we would need to update the pte atomically with lwarx/stwcx. + */ + /* Convert linux-style PTE to low word of PPC-style PTE */ + rlwinm r1,r0,32-9,30,30 /* _PAGE_RW -> PP msb */ + rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */ + rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */ + ori r1,r1,0xe04 /* clear out reserved bits */ + andc r1,r0,r1 /* PP = user? rw? 1: 3: 0 */ +BEGIN_FTR_SECTION + rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */ +END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) + mtspr SPRN_RPA,r1 + mfspr r2,SPRN_SRR1 /* Need to restore CR0 */ + mtcrf 0x80,r2 +BEGIN_MMU_FTR_SECTION + li r0,1 + mfspr r1,SPRN_SPRG_603_LRU + rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ + slw r0,r0,r2 + xor r1,r0,r1 + srw r0,r1,r2 + mtspr SPRN_SPRG_603_LRU,r1 + mfspr r2,SPRN_SRR1 + rlwimi r2,r0,31-14,14,14 + mtspr SPRN_SRR1,r2 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) + tlbld r3 + rfi +DataAddressInvalid: + mfspr r3,SPRN_SRR1 + rlwinm r1,r3,9,6,6 /* Get load/store bit */ + addis r1,r1,0x2000 + mtspr SPRN_DSISR,r1 + andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */ + mtspr SPRN_SRR1,r2 + mfspr r1,SPRN_DMISS /* Get failing address */ + rlwinm. r2,r2,0,31,31 /* Check for little endian access */ + beq 20f /* Jump if big endian */ + xori r1,r1,3 +20: mtspr SPRN_DAR,r1 /* Set fault address */ + mfmsr r0 /* Restore "normal" registers */ + xoris r0,r0,MSR_TGPR>>16 + mtcrf 0x80,r3 /* Restore CR0 */ + mtmsr r0 + b DataAccess + +/* + * Handle TLB miss for DATA Store on 603/603e + */ + . = 0x1200 +DataStoreTLBMiss: +/* + * r0: scratch + * r1: linux style pte ( later becomes ppc hardware pte ) + * r2: ptr to linux-style pte + * r3: scratch + */ + /* Get PTE (linux-style) and check access */ + mfspr r3,SPRN_DMISS + lis r1, TASK_SIZE@h /* check if kernel address */ + cmplw 0,r1,r3 + mfspr r2, SPRN_SPRG_PGDIR +#ifdef CONFIG_SWAP + li r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT | _PAGE_ACCESSED +#else + li r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT +#endif + bgt- 112f + lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */ + addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */ +112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ + lwz r2,0(r2) /* get pmd entry */ + rlwinm. r2,r2,0,0,19 /* extract address of pte page */ + beq- DataAddressInvalid /* return if no mapping */ + rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ + lwz r0,0(r2) /* get linux-style pte */ + andc. r1,r1,r0 /* check access & ~permission */ + bne- DataAddressInvalid /* return if access not permitted */ + /* + * NOTE! We are assuming this is not an SMP system, otherwise + * we would need to update the pte atomically with lwarx/stwcx. + */ + /* Convert linux-style PTE to low word of PPC-style PTE */ + rlwimi r0,r0,32-2,31,31 /* _PAGE_USER -> PP lsb */ + li r1,0xe06 /* clear out reserved bits & PP msb */ + andc r1,r0,r1 /* PP = user? 1: 0 */ +BEGIN_FTR_SECTION + rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */ +END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) + mtspr SPRN_RPA,r1 + mfspr r2,SPRN_SRR1 /* Need to restore CR0 */ + mtcrf 0x80,r2 +BEGIN_MMU_FTR_SECTION + li r0,1 + mfspr r1,SPRN_SPRG_603_LRU + rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */ + slw r0,r0,r2 + xor r1,r0,r1 + srw r0,r1,r2 + mtspr SPRN_SPRG_603_LRU,r1 + mfspr r2,SPRN_SRR1 + rlwimi r2,r0,31-14,14,14 + mtspr SPRN_SRR1,r2 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU) + tlbld r3 + rfi + +#ifndef CONFIG_ALTIVEC +#define altivec_assist_exception unknown_exception +#endif + +#ifndef CONFIG_TAU_INT +#define TAUException unknown_exception +#endif + + EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_STD) + EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_STD) + EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_STD) + EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD) + EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_STD) + EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2f00, Trap_2f, unknown_exception, EXC_XFER_STD) + + . = 0x3000 + +machine_check_tramp: + EXC_XFER_STD(0x200, machine_check_exception) + +alignment_exception_tramp: + EXC_XFER_STD(0x600, alignment_exception) + +handle_page_fault_tramp_1: +#ifdef CONFIG_VMAP_STACK + EXCEPTION_PROLOG_2 handle_dar_dsisr=1 +#endif + lwz r4, _DAR(r11) + lwz r5, _DSISR(r11) + /* fall through */ +handle_page_fault_tramp_2: + EXC_XFER_LITE(0x300, handle_page_fault) + +#ifdef CONFIG_VMAP_STACK +.macro save_regs_thread thread + stw r0, THR0(\thread) + stw r3, THR3(\thread) + stw r4, THR4(\thread) + stw r5, THR5(\thread) + stw r6, THR6(\thread) + stw r8, THR8(\thread) + stw r9, THR9(\thread) + mflr r0 + stw r0, THLR(\thread) + mfctr r0 + stw r0, THCTR(\thread) +.endm + +.macro restore_regs_thread thread + lwz r0, THLR(\thread) + mtlr r0 + lwz r0, THCTR(\thread) + mtctr r0 + lwz r0, THR0(\thread) + lwz r3, THR3(\thread) + lwz r4, THR4(\thread) + lwz r5, THR5(\thread) + lwz r6, THR6(\thread) + lwz r8, THR8(\thread) + lwz r9, THR9(\thread) +.endm + +hash_page_dsi: + save_regs_thread r10 + mfdsisr r3 + mfdar r4 + mfsrr0 r5 + mfsrr1 r9 + rlwinm r3, r3, 32 - 15, _PAGE_RW /* DSISR_STORE -> _PAGE_RW */ + bl hash_page + mfspr r10, SPRN_SPRG_THREAD + restore_regs_thread r10 + b .Lhash_page_dsi_cont + +hash_page_isi: + mr r11, r10 + mfspr r10, SPRN_SPRG_THREAD + save_regs_thread r10 + li r3, 0 + lwz r4, SRR0(r10) + lwz r9, SRR1(r10) + bl hash_page + mfspr r10, SPRN_SPRG_THREAD + restore_regs_thread r10 + mr r10, r11 + b .Lhash_page_isi_cont + + .globl fast_hash_page_return +fast_hash_page_return: + andis. r10, r9, SRR1_ISI_NOPT@h /* Set on ISI, cleared on DSI */ + mfspr r10, SPRN_SPRG_THREAD + restore_regs_thread r10 + bne 1f + + /* DSI */ + mtcr r11 + lwz r11, THR11(r10) + mfspr r10, SPRN_SPRG_SCRATCH0 + RFI + +1: /* ISI */ + mtcr r11 + mfspr r11, SPRN_SPRG_SCRATCH1 + mfspr r10, SPRN_SPRG_SCRATCH0 + RFI + +stack_overflow: + vmap_stack_overflow_exception +#endif + +AltiVecUnavailable: + EXCEPTION_PROLOG +#ifdef CONFIG_ALTIVEC + beq 1f + bl load_up_altivec /* if from user, just load it up */ + b fast_exception_return +#endif /* CONFIG_ALTIVEC */ +1: addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_LITE(0xf20, altivec_unavailable_exception) + +PerformanceMonitor: + EXCEPTION_PROLOG + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_STD(0xf00, performance_monitor_exception) + + +/* + * This code is jumped to from the startup code to copy + * the kernel image to physical address PHYSICAL_START. + */ +relocate_kernel: + addis r9,r26,klimit@ha /* fetch klimit */ + lwz r25,klimit@l(r9) + addis r25,r25,-KERNELBASE@h + lis r3,PHYSICAL_START@h /* Destination base address */ + li r6,0 /* Destination offset */ + li r5,0x4000 /* # bytes of memory to copy */ + bl copy_and_flush /* copy the first 0x4000 bytes */ + addi r0,r3,4f@l /* jump to the address of 4f */ + mtctr r0 /* in copy and do the rest. */ + bctr /* jump to the copy */ +4: mr r5,r25 + bl copy_and_flush /* copy the rest */ + b turn_on_mmu + +/* + * Copy routine used to copy the kernel to start at physical address 0 + * and flush and invalidate the caches as needed. + * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset + * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. + */ +_ENTRY(copy_and_flush) + addi r5,r5,-4 + addi r6,r6,-4 +4: li r0,L1_CACHE_BYTES/4 + mtctr r0 +3: addi r6,r6,4 /* copy a cache line */ + lwzx r0,r6,r4 + stwx r0,r6,r3 + bdnz 3b + dcbst r6,r3 /* write it to memory */ + sync + icbi r6,r3 /* flush the icache line */ + cmplw 0,r6,r5 + blt 4b + sync /* additional sync needed on g4 */ + isync + addi r5,r5,4 + addi r6,r6,4 + blr + +#ifdef CONFIG_SMP + .globl __secondary_start_mpc86xx +__secondary_start_mpc86xx: + mfspr r3, SPRN_PIR + stw r3, __secondary_hold_acknowledge@l(0) + mr r24, r3 /* cpu # */ + b __secondary_start + + .globl __secondary_start_pmac_0 +__secondary_start_pmac_0: + /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ + li r24,0 + b 1f + li r24,1 + b 1f + li r24,2 + b 1f + li r24,3 +1: + /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0 + set to map the 0xf0000000 - 0xffffffff region */ + mfmsr r0 + rlwinm r0,r0,0,28,26 /* clear DR (0x10) */ + mtmsr r0 + isync + + .globl __secondary_start +__secondary_start: + /* Copy some CPU settings from CPU 0 */ + bl __restore_cpu_setup + + lis r3,-KERNELBASE@h + mr r4,r24 + bl call_setup_cpu /* Call setup_cpu for this CPU */ +#ifdef CONFIG_PPC_BOOK3S_32 + lis r3,-KERNELBASE@h + bl init_idle_6xx +#endif /* CONFIG_PPC_BOOK3S_32 */ + + /* get current's stack and current */ + lis r2,secondary_current@ha + tophys(r2,r2) + lwz r2,secondary_current@l(r2) + tophys(r1,r2) + lwz r1,TASK_STACK(r1) + + /* stack */ + addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD + li r0,0 + tophys(r3,r1) + stw r0,0(r3) + + /* load up the MMU */ + bl load_segment_registers + bl load_up_mmu + + /* ptr to phys current thread */ + tophys(r4,r2) + addi r4,r4,THREAD /* phys address of our thread_struct */ + mtspr SPRN_SPRG_THREAD,r4 + lis r4, (swapper_pg_dir - PAGE_OFFSET)@h + ori r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l + mtspr SPRN_SPRG_PGDIR, r4 + + /* enable MMU and jump to start_secondary */ + li r4,MSR_KERNEL + lis r3,start_secondary@h + ori r3,r3,start_secondary@l + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + RFI +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_KVM_BOOK3S_HANDLER +#include "../kvm/book3s_rmhandlers.S" +#endif + +/* + * Those generic dummy functions are kept for CPUs not + * included in CONFIG_PPC_BOOK3S_32 + */ +#if !defined(CONFIG_PPC_BOOK3S_32) +_ENTRY(__save_cpu_setup) + blr +_ENTRY(__restore_cpu_setup) + blr +#endif /* !defined(CONFIG_PPC_BOOK3S_32) */ + +/* + * Load stuff into the MMU. Intended to be called with + * IR=0 and DR=0. + */ +early_hash_table: + sync /* Force all PTE updates to finish */ + isync + tlbia /* Clear all TLB entries */ + sync /* wait for tlbia/tlbie to finish */ + TLBSYNC /* ... on all CPUs */ + /* Load the SDR1 register (hash table base & size) */ + lis r6, early_hash - PAGE_OFFSET@h + ori r6, r6, 3 /* 256kB table */ + mtspr SPRN_SDR1, r6 + lis r6, early_hash@h + lis r3, Hash@ha + stw r6, Hash@l(r3) + blr + +load_up_mmu: + sync /* Force all PTE updates to finish */ + isync + tlbia /* Clear all TLB entries */ + sync /* wait for tlbia/tlbie to finish */ + TLBSYNC /* ... on all CPUs */ + /* Load the SDR1 register (hash table base & size) */ + lis r6,_SDR1@ha + tophys(r6,r6) + lwz r6,_SDR1@l(r6) + mtspr SPRN_SDR1,r6 + +/* Load the BAT registers with the values set up by MMU_init. */ + lis r3,BATS@ha + addi r3,r3,BATS@l + tophys(r3,r3) + LOAD_BAT(0,r3,r4,r5) + LOAD_BAT(1,r3,r4,r5) + LOAD_BAT(2,r3,r4,r5) + LOAD_BAT(3,r3,r4,r5) +BEGIN_MMU_FTR_SECTION + LOAD_BAT(4,r3,r4,r5) + LOAD_BAT(5,r3,r4,r5) + LOAD_BAT(6,r3,r4,r5) + LOAD_BAT(7,r3,r4,r5) +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) + blr + +_GLOBAL(load_segment_registers) + li r0, NUM_USER_SEGMENTS /* load up user segment register values */ + mtctr r0 /* for context 0 */ + li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */ +#ifdef CONFIG_PPC_KUEP + oris r3, r3, SR_NX@h /* Set Nx */ +#endif +#ifdef CONFIG_PPC_KUAP + oris r3, r3, SR_KS@h /* Set Ks */ +#endif + li r4, 0 +3: mtsrin r3, r4 + addi r3, r3, 0x111 /* increment VSID */ + addis r4, r4, 0x1000 /* address of next segment */ + bdnz 3b + li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */ + mtctr r0 /* for context 0 */ + rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */ + rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */ + oris r3, r3, SR_KP@h /* Kp = 1 */ +3: mtsrin r3, r4 + addi r3, r3, 0x111 /* increment VSID */ + addis r4, r4, 0x1000 /* address of next segment */ + bdnz 3b + blr + +/* + * This is where the main kernel code starts. + */ +start_here: + /* ptr to current */ + lis r2,init_task@h + ori r2,r2,init_task@l + /* Set up for using our exception vectors */ + /* ptr to phys current thread */ + tophys(r4,r2) + addi r4,r4,THREAD /* init task's THREAD */ + mtspr SPRN_SPRG_THREAD,r4 + lis r4, (swapper_pg_dir - PAGE_OFFSET)@h + ori r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l + mtspr SPRN_SPRG_PGDIR, r4 + + /* stack */ + lis r1,init_thread_union@ha + addi r1,r1,init_thread_union@l + li r0,0 + stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) +/* + * Do early platform-specific initialization, + * and set up the MMU. + */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif + li r3,0 + mr r4,r31 + bl machine_init + bl __save_cpu_setup + bl MMU_init + bl MMU_init_hw_patch + +/* + * Go back to running unmapped so we can load up new values + * for SDR1 (hash table pointer) and the segment registers + * and change to using our exception vectors. + */ + lis r4,2f@h + ori r4,r4,2f@l + tophys(r4,r4) + li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR) + + .align 4 + mtspr SPRN_SRR0,r4 + mtspr SPRN_SRR1,r3 + RFI +/* Load up the kernel context */ +2: bl load_up_mmu + +#ifdef CONFIG_BDI_SWITCH + /* Add helper information for the Abatron bdiGDB debugger. + * We do this here because we know the mmu is disabled, and + * will be enabled for real in just a few instructions. + */ + lis r5, abatron_pteptrs@h + ori r5, r5, abatron_pteptrs@l + stw r5, 0xf0(0) /* This much match your Abatron config */ + lis r6, swapper_pg_dir@h + ori r6, r6, swapper_pg_dir@l + tophys(r5, r5) + stw r6, 0(r5) +#endif /* CONFIG_BDI_SWITCH */ + +/* Now turn on the MMU for real! */ + li r4,MSR_KERNEL + lis r3,start_kernel@h + ori r3,r3,start_kernel@l + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + RFI + +/* + * void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next); + * + * Set up the segment registers for a new context. + */ +_ENTRY(switch_mmu_context) + lwz r3,MMCONTEXTID(r4) + cmpwi cr0,r3,0 + blt- 4f + mulli r3,r3,897 /* multiply context by skew factor */ + rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */ +#ifdef CONFIG_PPC_KUEP + oris r3, r3, SR_NX@h /* Set Nx */ +#endif +#ifdef CONFIG_PPC_KUAP + oris r3, r3, SR_KS@h /* Set Ks */ +#endif + li r0,NUM_USER_SEGMENTS + mtctr r0 + + lwz r4, MM_PGD(r4) +#ifdef CONFIG_BDI_SWITCH + /* Context switch the PTE pointer for the Abatron BDI2000. + * The PGDIR is passed as second argument. + */ + lis r5, abatron_pteptrs@ha + stw r4, abatron_pteptrs@l + 0x4(r5) +#endif + tophys(r4, r4) + mtspr SPRN_SPRG_PGDIR, r4 + li r4,0 + isync +3: + mtsrin r3,r4 + addi r3,r3,0x111 /* next VSID */ + rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */ + addis r4,r4,0x1000 /* address of next segment */ + bdnz 3b + sync + isync + blr +4: trap + EMIT_BUG_ENTRY 4b,__FILE__,__LINE__,0 + blr +EXPORT_SYMBOL(switch_mmu_context) + +/* + * An undocumented "feature" of 604e requires that the v bit + * be cleared before changing BAT values. + * + * Also, newer IBM firmware does not clear bat3 and 4 so + * this makes sure it's done. + * -- Cort + */ +clear_bats: + li r10,0 + + mtspr SPRN_DBAT0U,r10 + mtspr SPRN_DBAT0L,r10 + mtspr SPRN_DBAT1U,r10 + mtspr SPRN_DBAT1L,r10 + mtspr SPRN_DBAT2U,r10 + mtspr SPRN_DBAT2L,r10 + mtspr SPRN_DBAT3U,r10 + mtspr SPRN_DBAT3L,r10 + mtspr SPRN_IBAT0U,r10 + mtspr SPRN_IBAT0L,r10 + mtspr SPRN_IBAT1U,r10 + mtspr SPRN_IBAT1L,r10 + mtspr SPRN_IBAT2U,r10 + mtspr SPRN_IBAT2L,r10 + mtspr SPRN_IBAT3U,r10 + mtspr SPRN_IBAT3L,r10 +BEGIN_MMU_FTR_SECTION + /* Here's a tweak: at this point, CPU setup have + * not been called yet, so HIGH_BAT_EN may not be + * set in HID0 for the 745x processors. However, it + * seems that doesn't affect our ability to actually + * write to these SPRs. + */ + mtspr SPRN_DBAT4U,r10 + mtspr SPRN_DBAT4L,r10 + mtspr SPRN_DBAT5U,r10 + mtspr SPRN_DBAT5L,r10 + mtspr SPRN_DBAT6U,r10 + mtspr SPRN_DBAT6L,r10 + mtspr SPRN_DBAT7U,r10 + mtspr SPRN_DBAT7L,r10 + mtspr SPRN_IBAT4U,r10 + mtspr SPRN_IBAT4L,r10 + mtspr SPRN_IBAT5U,r10 + mtspr SPRN_IBAT5L,r10 + mtspr SPRN_IBAT6U,r10 + mtspr SPRN_IBAT6L,r10 + mtspr SPRN_IBAT7U,r10 + mtspr SPRN_IBAT7L,r10 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) + blr + +_ENTRY(update_bats) + lis r4, 1f@h + ori r4, r4, 1f@l + tophys(r4, r4) + mfmsr r6 + mflr r7 + li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR) + rlwinm r0, r6, 0, ~MSR_RI + rlwinm r0, r0, 0, ~MSR_EE + mtmsr r0 + + .align 4 + mtspr SPRN_SRR0, r4 + mtspr SPRN_SRR1, r3 + RFI +1: bl clear_bats + lis r3, BATS@ha + addi r3, r3, BATS@l + tophys(r3, r3) + LOAD_BAT(0, r3, r4, r5) + LOAD_BAT(1, r3, r4, r5) + LOAD_BAT(2, r3, r4, r5) + LOAD_BAT(3, r3, r4, r5) +BEGIN_MMU_FTR_SECTION + LOAD_BAT(4, r3, r4, r5) + LOAD_BAT(5, r3, r4, r5) + LOAD_BAT(6, r3, r4, r5) + LOAD_BAT(7, r3, r4, r5) +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) + li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI) + mtmsr r3 + mtspr SPRN_SRR0, r7 + mtspr SPRN_SRR1, r6 + RFI + +flush_tlbs: + lis r10, 0x40 +1: addic. r10, r10, -0x1000 + tlbie r10 + bgt 1b + sync + blr + +mmu_off: + addi r4, r3, __after_mmu_off - _start + mfmsr r3 + andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */ + beqlr + andc r3,r3,r0 + + .align 4 + mtspr SPRN_SRR0,r4 + mtspr SPRN_SRR1,r3 + sync + RFI + +/* We use one BAT to map up to 256M of RAM at _PAGE_OFFSET */ +initial_bats: + lis r11,PAGE_OFFSET@h + tophys(r8,r11) +#ifdef CONFIG_SMP + ori r8,r8,0x12 /* R/W access, M=1 */ +#else + ori r8,r8,2 /* R/W access */ +#endif /* CONFIG_SMP */ + ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ + + mtspr SPRN_DBAT0L,r8 /* N.B. 6xx have valid */ + mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ + mtspr SPRN_IBAT0L,r8 + mtspr SPRN_IBAT0U,r11 + isync + blr + +#ifdef CONFIG_BOOTX_TEXT +setup_disp_bat: + /* + * setup the display bat prepared for us in prom.c + */ + mflr r8 + bl reloc_offset + mtlr r8 + addis r8,r3,disp_BAT@ha + addi r8,r8,disp_BAT@l + cmpwi cr0,r8,0 + beqlr + lwz r11,0(r8) + lwz r8,4(r8) + mtspr SPRN_DBAT3L,r8 + mtspr SPRN_DBAT3U,r11 + blr +#endif /* CONFIG_BOOTX_TEXT */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM +setup_cpm_bat: + lis r8, 0xf000 + ori r8, r8, 0x002a + mtspr SPRN_DBAT1L, r8 + + lis r11, 0xf000 + ori r11, r11, (BL_1M << 2) | 2 + mtspr SPRN_DBAT1U, r11 + + blr +#endif + +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO +setup_usbgecko_bat: + /* prepare a BAT for early io */ +#if defined(CONFIG_GAMECUBE) + lis r8, 0x0c00 +#elif defined(CONFIG_WII) + lis r8, 0x0d00 +#else +#error Invalid platform for USB Gecko based early debugging. +#endif + /* + * The virtual address used must match the virtual address + * associated to the fixmap entry FIX_EARLY_DEBUG_BASE. + */ + lis r11, 0xfffe /* top 128K */ + ori r8, r8, 0x002a /* uncached, guarded ,rw */ + ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */ + mtspr SPRN_DBAT1L, r8 + mtspr SPRN_DBAT1U, r11 + blr +#endif + +#ifdef CONFIG_8260 +/* Jump into the system reset for the rom. + * We first disable the MMU, and then jump to the ROM reset address. + * + * r3 is the board info structure, r4 is the location for starting. + * I use this for building a small kernel that can load other kernels, + * rather than trying to write or rely on a rom monitor that can tftp load. + */ + .globl m8260_gorom +m8260_gorom: + mfmsr r0 + rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */ + sync + mtmsr r0 + sync + mfspr r11, SPRN_HID0 + lis r10, 0 + ori r10,r10,HID0_ICE|HID0_DCE + andc r11, r11, r10 + mtspr SPRN_HID0, r11 + isync + li r5, MSR_ME|MSR_RI + lis r6,2f@h + addis r6,r6,-KERNELBASE@h + ori r6,r6,2f@l + mtspr SPRN_SRR0,r6 + mtspr SPRN_SRR1,r5 + isync + sync + rfi +2: + mtlr r4 + blr +#endif + + +/* + * We put a few things here that have to be page-aligned. + * This stuff goes at the beginning of the data segment, + * which is page-aligned. + */ + .data + .globl sdata +sdata: + .globl empty_zero_page +empty_zero_page: + .space 4096 +EXPORT_SYMBOL(empty_zero_page) + + .globl swapper_pg_dir +swapper_pg_dir: + .space PGD_TABLE_SIZE + +/* Room for two PTE pointers, usually the kernel and current user pointers + * to their respective root page table. + */ +abatron_pteptrs: + .space 8 |