diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc5125twr.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc5125twr.dts | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts new file mode 100644 index 000000000000..4177b62240c2 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -0,0 +1,233 @@ +/* + * STx/Freescale ADS5125 MPC5125 silicon + * + * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved. + * + * Reworked by Matteo Facchinetti (engineering@sirius-es.it) + * Copyright (C) 2013 Sirius Electronic Systems + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "mpc5125twr"; // In BSP "mpc5125ads" + compatible = "fsl,mpc5125ads", "fsl,mpc5125"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5125@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x08000>; // 32K at 0x30000000 + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = <intr #, sense> + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5125-reset"; + reg = <0xe00 0x100>; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ // Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio0: gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + }; + + gpio1: gpio@1180 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1180 0x080>; + interrupts = <86 0x8>; + }; + + can@1300 { // CAN rev.2 + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + interrupts = <8 0x8>; + reg = <0x1500 0x100>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <0xa 0x8>; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + diu@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5125-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy0 >; + phy-connection-type = "rmii"; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5125-ioctl"; + reg = <0xA000 0x1000>; + }; + + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + // 5125 PSCs are not 52xx or 5121 PSC compatible + // PSC1 uart0 aka ttyPSC0 + serial@11100 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + // PSC9 uart1 aka ttyPSC1 + serial@11900 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2" + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; |