summaryrefslogtreecommitdiff
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/sibyte/swarm/time.c244
1 files changed, 0 insertions, 244 deletions
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
deleted file mode 100644
index 97c73c793c35..000000000000
--- a/arch/mips/sibyte/swarm/time.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Time routines for the swarm board. We pass all the hard stuff
- * through to the sb1250 handling code. Only thing we really keep
- * track of here is what time of day we think it is. And we don't
- * really even do a good job of that...
- */
-
-
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-static unsigned long long sec_bias = 0;
-static unsigned int usec_bias = 0;
-
-/* Xicor 1241 definitions */
-
-/*
- * Register bits
- */
-
-#define X1241REG_SR_BAT 0x80 /* currently on battery power */
-#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */
-#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */
-#define X1241REG_SR_RTCF 0x01 /* clock failed */
-#define X1241REG_BL_BP2 0x80 /* block protect 2 */
-#define X1241REG_BL_BP1 0x40 /* block protect 1 */
-#define X1241REG_BL_BP0 0x20 /* block protect 0 */
-#define X1241REG_BL_WD1 0x10
-#define X1241REG_BL_WD0 0x08
-#define X1241REG_HR_MIL 0x80 /* military time format */
-
-/*
- * Register numbers
- */
-
-#define X1241REG_BL 0x10 /* block protect bits */
-#define X1241REG_INT 0x11 /* */
-#define X1241REG_SC 0x30 /* Seconds */
-#define X1241REG_MN 0x31 /* Minutes */
-#define X1241REG_HR 0x32 /* Hours */
-#define X1241REG_DT 0x33 /* Day of month */
-#define X1241REG_MO 0x34 /* Month */
-#define X1241REG_YR 0x35 /* Year */
-#define X1241REG_DW 0x36 /* Day of Week */
-#define X1241REG_Y2K 0x37 /* Year 2K */
-#define X1241REG_SR 0x3F /* Status register */
-
-#define X1241_CCR_ADDRESS 0x6F
-
-#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg)))
-
-static int xicor_read(uint8_t addr)
-{
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
- __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
- SMB_CSR(R_SMB_START));
-
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
- SMB_CSR(R_SMB_START));
-
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
- return -1;
- }
-
- return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
-}
-
-static int xicor_write(uint8_t addr, int b)
-{
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- __raw_writeq(addr, SMB_CSR(R_SMB_CMD));
- __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
- SMB_CSR(R_SMB_START));
-
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
- return -1;
- } else {
- return 0;
- }
-}
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
-int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
-
- cmos_minutes = xicor_read(X1241REG_MN);
- cmos_minutes = BCD2BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- /* unlock writes to the CCR */
- xicor_write(X1241REG_SR, X1241REG_SR_WEL);
- xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- real_seconds = BIN2BCD(real_seconds);
- real_minutes = BIN2BCD(real_minutes);
- xicor_write(X1241REG_SC, real_seconds);
- xicor_write(X1241REG_MN, real_minutes);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- xicor_write(X1241REG_SR, 0);
-
- printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds);
-
- return retval;
-}
-
-static unsigned long __init get_swarm_time(void)
-{
- unsigned int year, mon, day, hour, min, sec, y2k;
-
- sec = xicor_read(X1241REG_SC);
- min = xicor_read(X1241REG_MN);
- hour = xicor_read(X1241REG_HR);
-
- if (hour & X1241REG_HR_MIL) {
- hour &= 0x3f;
- } else {
- if (hour & 0x20)
- hour = (hour & 0xf) + 0x12;
- }
-
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
-
- day = xicor_read(X1241REG_DT);
- mon = xicor_read(X1241REG_MO);
- year = xicor_read(X1241REG_YR);
- y2k = xicor_read(X1241REG_Y2K);
-
- day = BCD2BIN(day);
- mon = BCD2BIN(mon);
- year = BCD2BIN(year);
- y2k = BCD2BIN(y2k);
-
- year += (y2k * 100);
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-/*
- * Bring up the timer at 100 Hz.
- */
-void __init swarm_time_init(void)
-{
- unsigned int flags;
- int status;
-
- /* Set up the scd general purpose timer 0 to cpu 0 */
- sb1250_time_init();
-
- /* Establish communication with the Xicor 1241 RTC */
- /* XXXKW how do I share the SMBus with the I2C subsystem? */
-
- __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
- __raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
-
- if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
- printk("x1241: couldn't detect on SWARM SMBus 1\n");
- } else {
- if (status & X1241REG_SR_RTCF)
- printk("x1241: battery failed -- time is probably wrong\n");
- write_seqlock_irqsave(&xtime_lock, flags);
- xtime.tv_sec = get_swarm_time();
- xtime.tv_nsec = 0;
- write_sequnlock_irqrestore(&xtime_lock, flags);
- }
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 03:58:32 +0000