diff options
Diffstat (limited to 'arch/mips/kernel')
| -rw-r--r-- | arch/mips/kernel/bmips_vec.S | 3 | ||||
| -rw-r--r-- | arch/mips/kernel/cps-vec.S | 2 | ||||
| -rw-r--r-- | arch/mips/kernel/cpu-probe.c | 40 | ||||
| -rw-r--r-- | arch/mips/kernel/jump_label.c | 42 | ||||
| -rw-r--r-- | arch/mips/kernel/rtlx.c | 4 | ||||
| -rw-r--r-- | arch/mips/kernel/setup.c | 4 | ||||
| -rw-r--r-- | arch/mips/kernel/signal.c | 8 |
7 files changed, 79 insertions, 24 deletions
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S index 290c23b51678..86495072a922 100644 --- a/arch/mips/kernel/bmips_vec.S +++ b/arch/mips/kernel/bmips_vec.S @@ -208,7 +208,6 @@ bmips_reset_nmi_vec_end: END(bmips_reset_nmi_vec) .set pop - .previous /*********************************************************************** * CPU1 warm restart vector (used for second and subsequent boots). @@ -281,5 +280,3 @@ LEAF(bmips_enable_xks01) jr ra END(bmips_enable_xks01) - - .previous diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index e6e97d2a5c9e..0384b05ab5a0 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -229,6 +229,7 @@ LEAF(mips_cps_core_init) nop .set push + .set mips32r2 .set mt /* Only allow 1 TC per VPE to execute... */ @@ -345,6 +346,7 @@ LEAF(mips_cps_boot_vpes) nop .set push + .set mips32r2 .set mt 1: /* Enter VPE configuration state */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 94c4a0c0a577..dc49cf30c2db 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -193,6 +193,32 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa) static char unknown_isa[] = KERN_ERR \ "Unsupported ISA type, c0.config0: %d."; +static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) +{ + + unsigned int probability = c->tlbsize / c->tlbsizevtlb; + + /* + * 0 = All TLBWR instructions go to FTLB + * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the + * FTLB and 1 goes to the VTLB. + * 2 = 7:1: As above with 7:1 ratio. + * 3 = 3:1: As above with 3:1 ratio. + * + * Use the linear midpoint as the probability threshold. + */ + if (probability >= 12) + return 1; + else if (probability >= 6) + return 2; + else + /* + * So FTLB is less than 4 times bigger than VTLB. + * A 3:1 ratio can still be useful though. + */ + return 3; +} + static void set_ftlb_enable(struct cpuinfo_mips *c, int enable) { unsigned int config6; @@ -203,9 +229,14 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable) case CPU_P5600: /* proAptiv & related cores use Config6 to enable the FTLB */ config6 = read_c0_config6(); + /* Clear the old probability value */ + config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); if (enable) /* Enable FTLB */ - write_c0_config6(config6 | MIPS_CONF6_FTLBEN); + write_c0_config6(config6 | + (calculate_ftlb_probability(c) + << MIPS_CONF6_FTLBP_SHIFT) + | MIPS_CONF6_FTLBEN); else /* Disable FTLB */ write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN); @@ -757,31 +788,34 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_LOONGSON2; __cpu_name[cpu] = "ICT Loongson-2"; set_elf_platform(cpu, "loongson2e"); + set_isa(c, MIPS_CPU_ISA_III); break; case PRID_REV_LOONGSON2F: c->cputype = CPU_LOONGSON2; __cpu_name[cpu] = "ICT Loongson-2"; set_elf_platform(cpu, "loongson2f"); + set_isa(c, MIPS_CPU_ISA_III); break; case PRID_REV_LOONGSON3A: c->cputype = CPU_LOONGSON3; - c->writecombine = _CACHE_UNCACHED_ACCELERATED; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R1); break; case PRID_REV_LOONGSON3B_R1: case PRID_REV_LOONGSON3B_R2: c->cputype = CPU_LOONGSON3; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3b"); + set_isa(c, MIPS_CPU_ISA_M64R1); break; } - set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC | MIPS_CPU_32FPR; c->tlbsize = 64; + c->writecombine = _CACHE_UNCACHED_ACCELERATED; break; case PRID_IMP_LOONGSON_32: /* Loongson-1 */ decode_configs(c); diff --git a/arch/mips/kernel/jump_label.c b/arch/mips/kernel/jump_label.c index 6001610cfe55..dda800e9e731 100644 --- a/arch/mips/kernel/jump_label.c +++ b/arch/mips/kernel/jump_label.c @@ -18,31 +18,53 @@ #ifdef HAVE_JUMP_LABEL -#define J_RANGE_MASK ((1ul << 28) - 1) +/* + * Define parameters for the standard MIPS and the microMIPS jump + * instruction encoding respectively: + * + * - the ISA bit of the target, either 0 or 1 respectively, + * + * - the amount the jump target address is shifted right to fit in the + * immediate field of the machine instruction, either 2 or 1, + * + * - the mask determining the size of the jump region relative to the + * delay-slot instruction, either 256MB or 128MB, + * + * - the jump target alignment, either 4 or 2 bytes. + */ +#define J_ISA_BIT IS_ENABLED(CONFIG_CPU_MICROMIPS) +#define J_RANGE_SHIFT (2 - J_ISA_BIT) +#define J_RANGE_MASK ((1ul << (26 + J_RANGE_SHIFT)) - 1) +#define J_ALIGN_MASK ((1ul << J_RANGE_SHIFT) - 1) void arch_jump_label_transform(struct jump_entry *e, enum jump_label_type type) { + union mips_instruction *insn_p; union mips_instruction insn; - union mips_instruction *insn_p = - (union mips_instruction *)(unsigned long)e->code; - /* Jump only works within a 256MB aligned region. */ - BUG_ON((e->target & ~J_RANGE_MASK) != (e->code & ~J_RANGE_MASK)); + insn_p = (union mips_instruction *)msk_isa16_mode(e->code); + + /* Jump only works within an aligned region its delay slot is in. */ + BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK)); - /* Target must have 4 byte alignment. */ - BUG_ON((e->target & 3) != 0); + /* Target must have the right alignment and ISA must be preserved. */ + BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT); if (type == JUMP_LABEL_ENABLE) { - insn.j_format.opcode = j_op; - insn.j_format.target = (e->target & J_RANGE_MASK) >> 2; + insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op; + insn.j_format.target = e->target >> J_RANGE_SHIFT; } else { insn.word = 0; /* nop */ } get_online_cpus(); mutex_lock(&text_mutex); - *insn_p = insn; + if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) { + insn_p->halfword[0] = insn.word >> 16; + insn_p->halfword[1] = insn.word; + } else + *insn_p = insn; flush_icache_range((unsigned long)insn_p, (unsigned long)insn_p + sizeof(*insn_p)); diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 31b1b763cb29..c5c4fd54d797 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -94,12 +94,12 @@ int rtlx_open(int index, int can_sleep) int ret = 0; if (index >= RTLX_CHANNELS) { - pr_debug(KERN_DEBUG "rtlx_open index out of range\n"); + pr_debug("rtlx_open index out of range\n"); return -ENOSYS; } if (atomic_inc_return(&channel_wqs[index].in_open) > 1) { - pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index); + pr_debug("rtlx_open channel %d already opened\n", index); ret = -EBUSY; goto out_fail; } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d21ec57b6e95..f3b635f86c39 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -485,7 +485,7 @@ static void __init bootmem_init(void) * NOTE: historically plat_mem_setup did the entire platform initialization. * This was rather impractical because it meant plat_mem_setup had to * get away without any kind of memory allocator. To keep old code from - * breaking plat_setup was just renamed to plat_setup and a second platform + * breaking plat_setup was just renamed to plat_mem_setup and a second platform * initialization hook for anything else was introduced. */ @@ -493,7 +493,7 @@ static int usermem __initdata; static int __init early_parse_mem(char *p) { - unsigned long start, size; + phys_t start, size; /* * If a user specifies memory size, we diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 1d57605e4615..16f1e4f2bf3c 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -658,13 +658,13 @@ static int signal_setup(void) save_fp_context = _save_fp_context; restore_fp_context = _restore_fp_context; } else { - save_fp_context = copy_fp_from_sigcontext; - restore_fp_context = copy_fp_to_sigcontext; + save_fp_context = copy_fp_to_sigcontext; + restore_fp_context = copy_fp_from_sigcontext; } #endif /* CONFIG_SMP */ #else - save_fp_context = copy_fp_from_sigcontext;; - restore_fp_context = copy_fp_to_sigcontext; + save_fp_context = copy_fp_to_sigcontext; + restore_fp_context = copy_fp_from_sigcontext; #endif return 0; |