diff options
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c')
-rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c | 243 |
1 files changed, 0 insertions, 243 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c b/arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c deleted file mode 100644 index c239e5f4ab9a..000000000000 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c +++ /dev/null @@ -1,243 +0,0 @@ -/***********************license start*************** - * Author: Cavium Networks - * - * Contact: support@caviumnetworks.com - * This file is part of the OCTEON SDK - * - * Copyright (c) 2003-2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, but - * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or - * NONINFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this file; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * or visit http://www.gnu.org/licenses/. - * - * This file may also be available under a different license from Cavium. - * Contact Cavium Networks for more information - ***********************license end**************************************/ - -/** - * @file - * - * Helper functions for FPA setup. - * - */ -#include "executive-config.h" -#include "cvmx-config.h" -#include "cvmx.h" -#include "cvmx-bootmem.h" -#include "cvmx-fpa.h" -#include "cvmx-helper-fpa.h" - -/** - * Allocate memory for and initialize a single FPA pool. - * - * @pool: Pool to initialize - * @buffer_size: Size of buffers to allocate in bytes - * @buffers: Number of buffers to put in the pool. Zero is allowed - * @name: String name of the pool for debugging purposes - * Returns Zero on success, non-zero on failure - */ -static int __cvmx_helper_initialize_fpa_pool(int pool, uint64_t buffer_size, - uint64_t buffers, const char *name) -{ - uint64_t current_num; - void *memory; - uint64_t align = CVMX_CACHE_LINE_SIZE; - - /* - * Align the allocation so that power of 2 size buffers are - * naturally aligned. - */ - while (align < buffer_size) - align = align << 1; - - if (buffers == 0) - return 0; - - current_num = cvmx_read_csr(CVMX_FPA_QUEX_AVAILABLE(pool)); - if (current_num) { - cvmx_dprintf("Fpa pool %d(%s) already has %llu buffers. " - "Skipping setup.\n", - pool, name, (unsigned long long)current_num); - return 0; - } - - memory = cvmx_bootmem_alloc(buffer_size * buffers, align); - if (memory == NULL) { - cvmx_dprintf("Out of memory initializing fpa pool %d(%s).\n", - pool, name); - return -1; - } - cvmx_fpa_setup_pool(pool, name, memory, buffer_size, buffers); - return 0; -} - -/** - * Allocate memory and initialize the FPA pools using memory - * from cvmx-bootmem. Specifying zero for the number of - * buffers will cause that FPA pool to not be setup. This is - * useful if you aren't using some of the hardware and want - * to save memory. Use cvmx_helper_initialize_fpa instead of - * this function directly. - * - * @pip_pool: Should always be CVMX_FPA_PACKET_POOL - * @pip_size: Should always be CVMX_FPA_PACKET_POOL_SIZE - * @pip_buffers: - * Number of packet buffers. - * @wqe_pool: Should always be CVMX_FPA_WQE_POOL - * @wqe_size: Should always be CVMX_FPA_WQE_POOL_SIZE - * @wqe_entries: - * Number of work queue entries - * @pko_pool: Should always be CVMX_FPA_OUTPUT_BUFFER_POOL - * @pko_size: Should always be CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE - * @pko_buffers: - * PKO Command buffers. You should at minimum have two per - * each PKO queue. - * @tim_pool: Should always be CVMX_FPA_TIMER_POOL - * @tim_size: Should always be CVMX_FPA_TIMER_POOL_SIZE - * @tim_buffers: - * TIM ring buffer command queues. At least two per timer bucket - * is recommened. - * @dfa_pool: Should always be CVMX_FPA_DFA_POOL - * @dfa_size: Should always be CVMX_FPA_DFA_POOL_SIZE - * @dfa_buffers: - * DFA command buffer. A relatively small (32 for example) - * number should work. - * Returns Zero on success, non-zero if out of memory - */ -static int __cvmx_helper_initialize_fpa(int pip_pool, int pip_size, - int pip_buffers, int wqe_pool, - int wqe_size, int wqe_entries, - int pko_pool, int pko_size, - int pko_buffers, int tim_pool, - int tim_size, int tim_buffers, - int dfa_pool, int dfa_size, - int dfa_buffers) -{ - int status; - - cvmx_fpa_enable(); - - if ((pip_buffers > 0) && (pip_buffers <= 64)) - cvmx_dprintf - ("Warning: %d packet buffers may not be enough for hardware" - " prefetch. 65 or more is recommended.\n", pip_buffers); - - if (pip_pool >= 0) { - status = - __cvmx_helper_initialize_fpa_pool(pip_pool, pip_size, - pip_buffers, - "Packet Buffers"); - if (status) - return status; - } - - if (wqe_pool >= 0) { - status = - __cvmx_helper_initialize_fpa_pool(wqe_pool, wqe_size, - wqe_entries, - "Work Queue Entries"); - if (status) - return status; - } - - if (pko_pool >= 0) { - status = - __cvmx_helper_initialize_fpa_pool(pko_pool, pko_size, - pko_buffers, - "PKO Command Buffers"); - if (status) - return status; - } - - if (tim_pool >= 0) { - status = - __cvmx_helper_initialize_fpa_pool(tim_pool, tim_size, - tim_buffers, - "TIM Command Buffers"); - if (status) - return status; - } - - if (dfa_pool >= 0) { - status = - __cvmx_helper_initialize_fpa_pool(dfa_pool, dfa_size, - dfa_buffers, - "DFA Command Buffers"); - if (status) - return status; - } - - return 0; -} - -/** - * Allocate memory and initialize the FPA pools using memory - * from cvmx-bootmem. Sizes of each element in the pools is - * controlled by the cvmx-config.h header file. Specifying - * zero for any parameter will cause that FPA pool to not be - * setup. This is useful if you aren't using some of the - * hardware and want to save memory. - * - * @packet_buffers: - * Number of packet buffers to allocate - * @work_queue_entries: - * Number of work queue entries - * @pko_buffers: - * PKO Command buffers. You should at minimum have two per - * each PKO queue. - * @tim_buffers: - * TIM ring buffer command queues. At least two per timer bucket - * is recommened. - * @dfa_buffers: - * DFA command buffer. A relatively small (32 for example) - * number should work. - * Returns Zero on success, non-zero if out of memory - */ -int cvmx_helper_initialize_fpa(int packet_buffers, int work_queue_entries, - int pko_buffers, int tim_buffers, - int dfa_buffers) -{ -#ifndef CVMX_FPA_PACKET_POOL -#define CVMX_FPA_PACKET_POOL -1 -#define CVMX_FPA_PACKET_POOL_SIZE 0 -#endif -#ifndef CVMX_FPA_WQE_POOL -#define CVMX_FPA_WQE_POOL -1 -#define CVMX_FPA_WQE_POOL_SIZE 0 -#endif -#ifndef CVMX_FPA_OUTPUT_BUFFER_POOL -#define CVMX_FPA_OUTPUT_BUFFER_POOL -1 -#define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE 0 -#endif -#ifndef CVMX_FPA_TIMER_POOL -#define CVMX_FPA_TIMER_POOL -1 -#define CVMX_FPA_TIMER_POOL_SIZE 0 -#endif -#ifndef CVMX_FPA_DFA_POOL -#define CVMX_FPA_DFA_POOL -1 -#define CVMX_FPA_DFA_POOL_SIZE 0 -#endif - return __cvmx_helper_initialize_fpa(CVMX_FPA_PACKET_POOL, - CVMX_FPA_PACKET_POOL_SIZE, - packet_buffers, CVMX_FPA_WQE_POOL, - CVMX_FPA_WQE_POOL_SIZE, - work_queue_entries, - CVMX_FPA_OUTPUT_BUFFER_POOL, - CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, - pko_buffers, CVMX_FPA_TIMER_POOL, - CVMX_FPA_TIMER_POOL_SIZE, - tim_buffers, CVMX_FPA_DFA_POOL, - CVMX_FPA_DFA_POOL_SIZE, - dfa_buffers); -} |