diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 141 |
1 files changed, 65 insertions, 76 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4183e62f178c..d971d1586f1c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -19,6 +19,7 @@ config MIPS select HAVE_KRETPROBES select HAVE_DEBUG_KMEMLEAK select ARCH_BINFMT_ELF_RANDOMIZE_PIE + select HAVE_ARCH_TRANSPARENT_HUGEPAGE select RTC_LIB if !MACH_LOONGSON select GENERIC_ATOMIC64 if !64BIT select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE @@ -55,8 +56,8 @@ choice config MIPS_ALCHEMY bool "Alchemy processor based machines" select 64BIT_PHYS_ADDR - select CEVT_R4K_LIB - select CSRC_R4K_LIB + select CEVT_R4K + select CSRC_R4K select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL @@ -107,16 +108,16 @@ config ATH79 config BCM47XX bool "Broadcom BCM47XX based boards" + select ARCH_WANT_OPTIONAL_GPIOLIB select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select FW_CFE select HW_HAS_PCI select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_GPIO select SYS_HAS_EARLY_PRINTK - select CFE help Support for BCM47XX based boards @@ -193,8 +194,8 @@ config MACH_DECSTATION config MACH_JAZZ bool "Jazz family of machines" - select ARC - select ARC32 + select FW_ARC + select FW_ARC32 select ARCH_MAY_HAVE_PC_FDC select CEVT_R4K select CSRC_R4K @@ -417,27 +418,6 @@ config PMC_MSP of integrated peripherals, interfaces and DSPs in addition to a variety of MIPS cores. -config PMC_YOSEMITE - bool "PMC-Sierra Yosemite eval board" - select CEVT_R4K - select CSRC_R4K - select DMA_COHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_CPU_RM9K - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM9000 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_SMP - help - Yosemite is an evaluation board for the RM9000x2 processor - manufactured by PMC-Sierra. - config POWERTV bool "Cisco PowerTV" select BOOT_ELF32 @@ -458,8 +438,8 @@ config POWERTV config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" - select ARC - select ARC32 + select FW_ARC + select FW_ARC32 select BOOT_ELF32 select CEVT_R4K select CSRC_R4K @@ -498,8 +478,8 @@ config SGI_IP22 config SGI_IP27 bool "SGI IP27 (Origin200/2000)" - select ARC - select ARC64 + select FW_ARC + select FW_ARC64 select BOOT_ELF64 select DEFAULT_SGI_PARTITION select DMA_COHERENT @@ -519,8 +499,8 @@ config SGI_IP27 config SGI_IP28 bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)" depends on EXPERIMENTAL - select ARC - select ARC64 + select FW_ARC + select FW_ARC64 select BOOT_ELF64 select CEVT_R4K select CSRC_R4K @@ -555,8 +535,8 @@ config SGI_IP28 config SGI_IP32 bool "SGI IP32 (O2)" - select ARC - select ARC32 + select FW_ARC + select FW_ARC32 select BOOT_ELF32 select CEVT_R4K select CSRC_R4K @@ -674,8 +654,8 @@ config SIBYTE_BIGSUR config SNI_RM bool "SNI RM200/300/400" - select ARC if CPU_LITTLE_ENDIAN - select ARC32 if CPU_LITTLE_ENDIAN + select FW_ARC if CPU_LITTLE_ENDIAN + select FW_ARC32 if CPU_LITTLE_ENDIAN select SNIPROM if CPU_BIG_ENDIAN select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 @@ -776,6 +756,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select DMA_COHERENT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select EDAC_SUPPORT select SYS_SUPPORTS_HOTPLUG_CPU select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON @@ -819,7 +800,7 @@ config NLM_XLR_BOARD select CSRC_R4K select IRQ_CPU select ARCH_SUPPORTS_MSI - select ZONE_DMA if 64BIT + select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK select USB_ARCH_HAS_OHCI if USB_SUPPORT @@ -847,7 +828,7 @@ config NLM_XLP_BOARD select CEVT_R4K select CSRC_R4K select IRQ_CPU - select ZONE_DMA if 64BIT + select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK select USE_OF @@ -908,7 +889,7 @@ config SCHED_OMIT_FRAME_POINTER # # Select some configuration options automatically based on user selections. # -config ARC +config FW_ARC bool config ARCH_MAY_HAVE_PC_FDC @@ -926,11 +907,7 @@ config CEVT_DS1287 config CEVT_GT641XX bool -config CEVT_R4K_LIB - bool - config CEVT_R4K - select CEVT_R4K_LIB bool config CEVT_SB1250 @@ -948,11 +925,7 @@ config CSRC_IOASIC config CSRC_POWERTV bool -config CSRC_R4K_LIB - bool - config CSRC_R4K - select CSRC_R4K_LIB bool config CSRC_SB1250 @@ -963,7 +936,7 @@ config GPIO_TXX9 select ARCH_REQUIRE_GPIOLIB bool -config CFE +config FW_CFE bool config ARCH_DMA_ADDR_T_64BIT @@ -1079,15 +1052,15 @@ config SYS_SUPPORTS_HUGETLBFS depends on CPU_SUPPORTS_HUGEPAGES && 64BIT default y +config MIPS_HUGE_TLB_SUPPORT + def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE + config IRQ_CPU bool config IRQ_CPU_RM7K bool -config IRQ_CPU_RM9K - bool - config IRQ_MSP_SLP bool @@ -1112,10 +1085,6 @@ config PCI_GT64XXX_PCI0 config NO_EXCEPT_FILL bool -config MIPS_RM9122 - bool - select SERIAL_RM9000 - config SOC_EMMA2RH bool select CEVT_R4K @@ -1161,9 +1130,6 @@ config SOC_PNX8550 config SWAP_IO_SPACE bool -config SERIAL_RM9000 - bool - config SGI_HAS_INDYDOG bool @@ -1185,7 +1151,7 @@ config SGI_HAS_I8042 config DEFAULT_SGI_PARTITION bool -config ARC32 +config FW_ARC32 bool config SNIPROM @@ -1218,7 +1184,7 @@ config ARC_PROMLIB depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 default y -config ARC64 +config FW_ARC64 bool config BOOT_ELF64 @@ -1370,6 +1336,7 @@ config CPU_R4X00 depends on SYS_HAS_CPU_R4X00 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES help MIPS Technologies R4000-series processors other than 4300, including the R4000, R4400, R4600, and 4700. @@ -1380,12 +1347,14 @@ config CPU_TX49XX select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES config CPU_R5000 bool "R5000" depends on SYS_HAS_CPU_R5000 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES help MIPS Technologies R5000-series processors other than the Nevada. @@ -1394,6 +1363,7 @@ config CPU_R5432 depends on SYS_HAS_CPU_R5432 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES config CPU_R5500 bool "R5500" @@ -1419,6 +1389,7 @@ config CPU_NEVADA depends on SYS_HAS_CPU_NEVADA select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES help QED / PMC-Sierra RM52xx-series ("Nevada") processors. @@ -1439,6 +1410,7 @@ config CPU_R10000 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES help MIPS Technologies R10000-series processors. @@ -1449,15 +1421,7 @@ config CPU_RM7000 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM - -config CPU_RM9000 - bool "RM9000" - depends on SYS_HAS_CPU_RM9000 - select CPU_HAS_PREFETCH - select CPU_SUPPORTS_32BIT_KERNEL - select CPU_SUPPORTS_64BIT_KERNEL - select CPU_SUPPORTS_HIGHMEM - select WEAK_ORDERING + select CPU_SUPPORTS_HUGEPAGES config CPU_SB1 bool "SB1" @@ -1465,6 +1429,7 @@ config CPU_SB1 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES select WEAK_ORDERING config CPU_CAVIUM_OCTEON @@ -1528,9 +1493,9 @@ config CPU_XLR select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC - select CPU_SUPPORTS_HUGEPAGES help Netlogic Microsystems XLR/XLS processors. @@ -1544,6 +1509,7 @@ config CPU_XLP select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC select CPU_HAS_PREFETCH + select CPU_MIPSR2 help Netlogic Microsystems XLP processors. endchoice @@ -1591,6 +1557,7 @@ config CPU_LOONGSON2 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES config CPU_LOONGSON1 bool @@ -1675,9 +1642,6 @@ config SYS_HAS_CPU_R10000 config SYS_HAS_CPU_RM7000 bool -config SYS_HAS_CPU_RM9000 - bool - config SYS_HAS_CPU_SB1 bool @@ -1757,7 +1721,7 @@ config CPU_SUPPORTS_UNCACHED_ACCELERATED bool config MIPS_PGD_C0_CONTEXT bool - default y if 64BIT && CPU_MIPSR2 + default y if 64BIT && CPU_MIPSR2 && !CPU_XLP # # Set to y for ptrace access to watch registers. @@ -2188,7 +2152,7 @@ config NODES_SHIFT config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON) + depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP) default y help Enable hardware performance counter support for perf events. If @@ -2366,6 +2330,29 @@ config KEXEC support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made. +config CRASH_DUMP + bool "Kernel crash dumps" + help + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or firmware using + PHYSICAL_START. + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" + default "0xffffffff84000000" if 64BIT + default "0x84000000" if 32BIT + depends on CRASH_DUMP + help + This gives the CKSEG0 or KSEG0 address where the kernel is loaded. + If you plan to use kernel for capturing the crash dump change + this value to start of the reserved region (the "X" value as + specified in the "crashkernel=YM@XM" command line boot parameter + passed to the panic-ed kernel). + config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS @@ -2572,6 +2559,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/mips/Kconfig.debug" |