summaryrefslogtreecommitdiff
path: root/arch/m68k/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/include')
-rw-r--r--arch/m68k/include/asm/m5206sim.h10
-rw-r--r--arch/m68k/include/asm/m520xsim.h9
-rw-r--r--arch/m68k/include/asm/m523xsim.h7
-rw-r--r--arch/m68k/include/asm/m5249sim.h5
-rw-r--r--arch/m68k/include/asm/m5272sim.h3
-rw-r--r--arch/m68k/include/asm/m527xsim.h6
-rw-r--r--arch/m68k/include/asm/m528xsim.h7
-rw-r--r--arch/m68k/include/asm/m5307sim.h11
-rw-r--r--arch/m68k/include/asm/m532xsim.h7
-rw-r--r--arch/m68k/include/asm/m5407sim.h3
-rw-r--r--arch/m68k/include/asm/m54xxsim.h8
-rw-r--r--arch/m68k/include/asm/mcfuart.h43
12 files changed, 74 insertions, 45 deletions
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index b882a210ee6e..aa7ee48d5059 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -90,6 +90,14 @@
#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
+#if defined(CONFIG_NETtel)
+#define MCFUART_BASE1 0x180 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x140 /* Base address of UART1 */
+#define MCFUART_BASE2 0x180 /* Base address of UART2 */
+#endif
+
/*
* Define system peripheral IRQ usage.
*/
@@ -97,7 +105,7 @@
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
- * Generic GPIO
+ * Generic GPIO
*/
#define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 85b39edf41a0..8cd8bce38594 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -100,6 +100,7 @@
#define MCFGPIO_PCLRR_UART 0xFC0A402A
#define MCFGPIO_PCLRR_FECH 0xFC0A402B
#define MCFGPIO_PCLRR_FECL 0xFC0A402C
+
/*
* Generic GPIO support
*/
@@ -112,7 +113,6 @@
#define MCFGPIO_PIN_MAX 80
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
-/****************************************************************************/
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
@@ -129,6 +129,13 @@
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
+#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
+#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
+
+/*
* Reset Controll Unit.
*/
#define MCF_RCR 0xFC0A0000
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 9d597dcb29c0..4ec0f93a7ece 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -52,6 +52,13 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index c107228728db..21d0bbfbc0c9 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -59,6 +59,11 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
/*
* Some symbol defines for the above...
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 8cea714dee46..974c448c098e 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -65,6 +65,9 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
+#define MCFUART_BASE1 0x100 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 5223b71d3432..8a5a1ab57d01 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -58,6 +58,12 @@
#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
#endif
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 4e35f970f662..47c851ef78d3 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -44,6 +44,13 @@
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+
+/*
* GPIO registers
*/
#define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000)
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 008f36bd66c3..7003d7268ae8 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -97,6 +97,17 @@
#define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
+ * UART module.
+ */
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+#endif
+
+/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 16
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index b8126d3253e1..45c119c072db 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -103,6 +103,13 @@
#define ACR_CM_OFF_IMP (3<<5)
#define ACR_WPROTECT (1<<2)
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
+#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
+#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */
+
/*********************************************************************
*
* Reset Controller Module
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index e07d4d8cf31f..ddfff88629fe 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -76,6 +76,9 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+
#define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248)
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index 6072248916ac..a08a7ae776b1 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -25,6 +25,14 @@
#define MCFINTC_ICR0 0x40 /* Base ICR register */
/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x8600 /* Base address of UART1 */
+#define MCFUART_BASE2 0x8700 /* Base address of UART2 */
+#define MCFUART_BASE3 0x8800 /* Base address of UART3 */
+#define MCFUART_BASE4 0x8900 /* Base address of UART4 */
+
+/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index c67dacad7c1c..2abedff0a694 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -12,49 +12,6 @@
#define mcfuart_h
/****************************************************************************/
-/*
- * Define the base address of the UARTS within the MBAR address
- * space.
- */
-#if defined(CONFIG_M5272)
-#define MCFUART_BASE1 0x100 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define MCFUART_BASE1 0x180 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x140 /* Base address of UART1 */
-#define MCFUART_BASE2 0x180 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x240 /* Base address of UART2 */
-#define MCFUART_BASE3 0x280 /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
-#define MCFUART_BASE2 0x200 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
-#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
-#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
-#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
-#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
-#elif defined(CONFIG_M54xx)
-#define MCFUART_BASE1 0x8600 /* on M54xx */
-#define MCFUART_BASE2 0x8700 /* on M54xx */
-#define MCFUART_BASE3 0x8800 /* on M54xx */
-#define MCFUART_BASE4 0x8900 /* on M54xx */
-#endif
-
-
#include <linux/serial_core.h>
#include <linux/platform_device.h>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 21:02:56 +0000