summaryrefslogtreecommitdiff
path: root/arch/ia64
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64')
-rw-r--r--arch/ia64/configs/sn2_defconfig4
-rw-r--r--arch/ia64/configs/tiger_defconfig39
-rw-r--r--arch/ia64/configs/zx1_defconfig166
-rw-r--r--arch/ia64/hp/common/sba_iommu.c4
-rw-r--r--arch/ia64/hp/sim/simserial.c16
-rw-r--r--arch/ia64/kernel/entry.S110
-rw-r--r--arch/ia64/kernel/fsys.S147
-rw-r--r--arch/ia64/kernel/gate.S62
-rw-r--r--arch/ia64/kernel/ia64_ksyms.c3
-rw-r--r--arch/ia64/kernel/ivt.S198
-rw-r--r--arch/ia64/kernel/ptrace.c22
-rw-r--r--arch/ia64/kernel/setup.c12
-rw-r--r--arch/ia64/kernel/smp.c3
-rw-r--r--arch/ia64/sn/kernel/io_init.c2
-rw-r--r--arch/ia64/sn/kernel/iomv.c6
-rw-r--r--arch/ia64/sn/kernel/setup.c43
-rw-r--r--arch/ia64/sn/kernel/sn2/ptc_deadlock.S1
-rw-r--r--arch/ia64/sn/kernel/tiocx.c14
-rw-r--r--arch/ia64/sn/pci/tioca_provider.c8
19 files changed, 549 insertions, 311 deletions
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 487d2e36b0a6..c05613980300 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -99,7 +99,7 @@ CONFIG_ACPI_DEALLOCATE_IRQ=y
# Firmware Drivers
#
CONFIG_EFI_VARS=y
-# CONFIG_EFI_PCDP is not set
+CONFIG_EFI_PCDP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
@@ -650,7 +650,7 @@ CONFIG_MMTIMER=y
#
# Console display driver support
#
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 47f45341ac62..73454eee26f1 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-20050621
-# Tue Jun 21 14:03:24 2005
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:28:12 2005
#
#
@@ -80,18 +80,29 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
# CONFIG_NUMA is not set
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -257,6 +268,7 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -395,6 +407,7 @@ CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
@@ -407,6 +420,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
@@ -598,9 +613,7 @@ CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
@@ -629,7 +642,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -743,6 +755,7 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -779,9 +792,11 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
@@ -838,7 +853,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -857,12 +872,17 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -922,7 +942,6 @@ CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
@@ -953,15 +972,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1069,6 +1091,7 @@ CONFIG_LOG_BUF_SHIFT=20
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1090,7 +1113,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 21d6f9bab5e9..b7755e4436d2 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10
-# Wed Dec 29 09:05:48 2004
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:31:11 2005
#
#
@@ -12,6 +12,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -24,23 +25,26 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -59,12 +63,15 @@ CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_ZX1=y
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
@@ -73,22 +80,36 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
# CONFIG_NUMA is not set
CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=16
# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
@@ -120,6 +141,7 @@ CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
#
# Bus options (PCI, PCMCIA)
@@ -129,6 +151,7 @@ CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
@@ -138,7 +161,6 @@ CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
@@ -147,10 +169,6 @@ CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# Device Drivers
#
@@ -184,6 +202,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
@@ -203,6 +222,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -246,6 +266,7 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -275,6 +296,7 @@ CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -288,6 +310,7 @@ CONFIG_SCSI_LOGGING=y
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
@@ -303,13 +326,10 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -319,8 +339,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
@@ -331,7 +349,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -344,9 +362,9 @@ CONFIG_SCSI_QLA2XXX=y
#
# Fusion MPT device support
#
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -368,12 +386,12 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
@@ -386,6 +404,8 @@ CONFIG_IP_MULTICAST=y
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -405,8 +425,6 @@ CONFIG_NETFILTER=y
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -483,7 +501,6 @@ CONFIG_NET_PCI=y
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -505,9 +522,11 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -565,18 +584,6 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -586,6 +593,16 @@ CONFIG_SERIO=y
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -603,7 +620,6 @@ CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -611,6 +627,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -644,6 +661,12 @@ CONFIG_DRM_RADEON=y
# CONFIG_DRM_SIS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -668,6 +691,7 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -691,10 +715,14 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -705,21 +733,29 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -746,6 +782,7 @@ CONFIG_VIDEO_DEV=y
#
# Video Adapters
#
+# CONFIG_TUNER_MULTI_I2C is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
@@ -778,6 +815,11 @@ CONFIG_VIDEO_DEV=y
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -785,6 +827,7 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -801,6 +844,7 @@ CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -820,6 +864,7 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -869,6 +914,8 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -876,6 +923,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
@@ -893,13 +941,14 @@ CONFIG_SND_FM801_TEA575X=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
@@ -909,6 +958,8 @@ CONFIG_SND_FM801_TEA575X=y
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -920,8 +971,6 @@ CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -929,7 +978,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
@@ -947,12 +999,11 @@ CONFIG_USB_UHCI_HCD=y
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -966,9 +1017,11 @@ CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
@@ -978,7 +1031,6 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
@@ -992,6 +1044,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
+# CONFIG_USB_PWC is not set
#
# USB Network Adapters
@@ -1001,6 +1054,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -1016,7 +1070,6 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
@@ -1025,9 +1078,11 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -1041,12 +1096,22 @@ CONFIG_USB_HIDDEV=y
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1056,6 +1121,10 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1089,7 +1158,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
@@ -1120,15 +1188,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -1209,6 +1280,8 @@ CONFIG_NLS_UTF8=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Profiling support
@@ -1218,14 +1291,18 @@ CONFIG_CRC32=y
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_KPROBES=y
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
@@ -1252,6 +1329,7 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index b8db6e3e5e81..11957598a8b9 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -156,10 +156,13 @@
*/
#define DELAYED_RESOURCE_CNT 64
+#define PCI_DEVICE_ID_HP_SX2000_IOC 0x12ec
+
#define ZX1_IOC_ID ((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
#define ZX2_IOC_ID ((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
#define REO_IOC_ID ((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
#define SX1000_IOC_ID ((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
+#define SX2000_IOC_ID ((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP)
#define ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */
@@ -1726,6 +1729,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = {
{ ZX1_IOC_ID, "zx1", ioc_zx1_init },
{ ZX2_IOC_ID, "zx2", NULL },
{ SX1000_IOC_ID, "sx1000", NULL },
+ { SX2000_IOC_ID, "sx2000", NULL },
};
static struct ioc * __init
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 786e70718ce4..7a8ae0f4b387 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/serial.h>
#include <linux/serialP.h>
+#include <linux/sysrq.h>
#include <asm/irq.h>
#include <asm/hw_irq.h>
@@ -149,12 +150,17 @@ static void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
seen_esc = 2;
continue;
} else if ( seen_esc == 2 ) {
- if ( ch == 'P' ) show_state(); /* F1 key */
-#ifdef CONFIG_KDB
- if ( ch == 'S' )
- kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+ if ( ch == 'P' ) /* F1 */
+ show_state();
+#ifdef CONFIG_MAGIC_SYSRQ
+ if ( ch == 'S' ) { /* F4 */
+ do
+ ch = ia64_ssc(0, 0, 0, 0,
+ SSC_GETCHAR);
+ while (!ch);
+ handle_sysrq(ch, regs, NULL);
+ }
#endif
-
seen_esc = 0;
continue;
}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 785a51b0ad8e..69f88d561d62 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -470,18 +470,6 @@ ENTRY(load_switch_stack)
br.cond.sptk.many b7
END(load_switch_stack)
-GLOBAL_ENTRY(__ia64_syscall)
- .regstk 6,0,0,0
- mov r15=in5 // put syscall number in place
- break __BREAK_SYSCALL
- movl r2=errno
- cmp.eq p6,p7=-1,r10
- ;;
-(p6) st4 [r2]=r8
-(p6) mov r8=-1
- br.ret.sptk.many rp
-END(__ia64_syscall)
-
GLOBAL_ENTRY(execve)
mov r15=__NR_execve // put syscall number in place
break __BREAK_SYSCALL
@@ -637,7 +625,7 @@ END(ia64_ret_from_syscall)
* r8-r11: restored (syscall return value(s))
* r12: restored (user-level stack pointer)
* r13: restored (user-level thread pointer)
- * r14: cleared
+ * r14: set to __kernel_syscall_via_epc
* r15: restored (syscall #)
* r16-r17: cleared
* r18: user-level b6
@@ -658,7 +646,7 @@ END(ia64_ret_from_syscall)
* pr: restored (user-level pr)
* b0: restored (user-level rp)
* b6: restored
- * b7: cleared
+ * b7: set to __kernel_syscall_via_epc
* ar.unat: restored (user-level ar.unat)
* ar.pfs: restored (user-level ar.pfs)
* ar.rsc: restored (user-level ar.rsc)
@@ -704,72 +692,79 @@ ENTRY(ia64_leave_syscall)
;;
(p6) ld4 r31=[r18] // load current_thread_info()->flags
ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs"
- mov b7=r0 // clear b7
+ nop.i 0
;;
- ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage)
+ mov r16=ar.bsp // M2 get existing backing store pointer
ld8 r18=[r2],PT(R9)-PT(B6) // load b6
(p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
;;
- mov r16=ar.bsp // M2 get existing backing store pointer
+ ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage)
(p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
(p6) br.cond.spnt .work_pending_syscall
;;
// start restoring the state saved on the kernel stack (struct pt_regs):
ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
ld8 r11=[r3],PT(CR_IIP)-PT(R11)
- mov f6=f0 // clear f6
+(pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
;;
invala // M0|1 invalidate ALAT
- rsm psr.i | psr.ic // M2 initiate turning off of interrupt and interruption collection
- mov f9=f0 // clear f9
+ rsm psr.i | psr.ic // M2 turn off interrupts and interruption collection
+ cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should restore cr.ifs
- ld8 r29=[r2],16 // load cr.ipsr
- ld8 r28=[r3],16 // load cr.iip
- mov f8=f0 // clear f8
+ ld8 r29=[r2],16 // M0|1 load cr.ipsr
+ ld8 r28=[r3],16 // M0|1 load cr.iip
+ mov r22=r0 // A clear r22
;;
ld8 r30=[r2],16 // M0|1 load cr.ifs
ld8 r25=[r3],16 // M0|1 load ar.unat
- cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore cr.ifs
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
;;
ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs
-(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
- mov f10=f0 // clear f10
+(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
+ nop 0
;;
- ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // load b0
- ld8 r27=[r3],PT(PR)-PT(AR_RSC) // load ar.rsc
- mov f11=f0 // clear f11
+ ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+ ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc
+ mov f6=f0 // F clear f6
;;
- ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // load ar.rnat (may be garbage)
- ld8 r31=[r3],PT(R1)-PT(PR) // load predicates
-(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+ ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be garbage)
+ ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates
+ mov f7=f0 // F clear f7
;;
- ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // load ar.fpsr
- ld8.fill r1=[r3],16 // load r1
-(pUStk) mov r17=1
+ ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr
+ ld8.fill r1=[r3],16 // M0|1 load r1
+(pUStk) mov r17=1 // A
;;
- srlz.d // M0 ensure interruption collection is off
- ld8.fill r13=[r3],16
- mov f7=f0 // clear f7
+(pUStk) st1 [r14]=r17 // M2|3
+ ld8.fill r13=[r3],16 // M0|1
+ mov f8=f0 // F clear f8
;;
- ld8.fill r12=[r2] // restore r12 (sp)
- mov.m ar.ssd=r0 // M2 clear ar.ssd
- mov r22=r0 // clear r22
+ ld8.fill r12=[r2] // M0|1 restore r12 (sp)
+ ld8.fill r15=[r3] // M0|1 restore r15
+ mov b6=r18 // I0 restore b6
- ld8.fill r15=[r3] // restore r15
-(pUStk) st1 [r14]=r17
- addl r3=THIS_CPU(ia64_phys_stacked_size_p8),r0
+ addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A
+ mov f9=f0 // F clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch // B
+
+ srlz.d // M0 ensure interruption collection is off (for cover)
+ shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
+ cover // B add current frame into dirty partition & set cr.ifs
;;
-(pUStk) ld4 r17=[r3] // r17 = cpu_data->phys_stacked_size_p8
- mov.m ar.csd=r0 // M2 clear ar.csd
- mov b6=r18 // I0 restore b6
+(pUStk) ld4 r17=[r17] // M0|1 r17 = cpu_data->phys_stacked_size_p8
+ mov r19=ar.bsp // M2 get new backing store pointer
+ mov f10=f0 // F clear f10
+
+ nop.m 0
+ movl r14=__kernel_syscall_via_epc // X
;;
- mov r14=r0 // clear r14
- shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
-(pKStk) br.cond.dpnt.many skip_rbs_switch
+ mov.m ar.csd=r0 // M2 clear ar.csd
+ mov.m ar.ccv=r0 // M2 clear ar.ccv
+ mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc)
- mov.m ar.ccv=r0 // clear ar.ccv
-(pNonSys) br.cond.dpnt.many dont_preserve_current_frame
- br.cond.sptk.many rbs_switch
+ mov.m ar.ssd=r0 // M2 clear ar.ssd
+ mov f11=f0 // F clear f11
+ br.cond.sptk.many rbs_switch // B
END(ia64_leave_syscall)
#ifdef CONFIG_IA32_SUPPORT
@@ -885,7 +880,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
ldf.fill f7=[r2],PT(F11)-PT(F7)
ldf.fill f8=[r3],32
;;
- srlz.i // ensure interruption collection is off
+ srlz.d // ensure that inter. collection is off (VHPT is don't care, since text is pinned)
mov ar.ccv=r15
;;
ldf.fill f11=[r2]
@@ -945,11 +940,10 @@ GLOBAL_ENTRY(ia64_leave_kernel)
* NOTE: alloc, loadrs, and cover can't be predicated.
*/
(pNonSys) br.cond.dpnt dont_preserve_current_frame
-
-rbs_switch:
cover // add current frame into dirty partition and set cr.ifs
;;
mov r19=ar.bsp // get new backing store pointer
+rbs_switch:
sub r16=r16,r18 // krbs = old bsp - size of dirty partition
cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs
;;
@@ -1024,14 +1018,14 @@ rse_clear_invalid:
mov loc5=0
mov loc6=0
mov loc7=0
-(pRecurse) br.call.sptk.few b0=rse_clear_invalid
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
;;
mov loc8=0
mov loc9=0
cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
mov loc10=0
mov loc11=0
-(pReturn) br.ret.sptk.many b0
+(pReturn) br.ret.dptk.many b0
#endif /* !CONFIG_ITANIUM */
# undef pRecurse
# undef pReturn
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 962b6c4e32b5..7d7684a369d3 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -531,93 +531,114 @@ GLOBAL_ENTRY(fsys_bubble_down)
.altrp b6
.body
/*
- * We get here for syscalls that don't have a lightweight handler. For those, we
- * need to bubble down into the kernel and that requires setting up a minimal
- * pt_regs structure, and initializing the CPU state more or less as if an
- * interruption had occurred. To make syscall-restarts work, we setup pt_regs
- * such that cr_iip points to the second instruction in syscall_via_break.
- * Decrementing the IP hence will restart the syscall via break and not
- * decrementing IP will return us to the caller, as usual. Note that we preserve
- * the value of psr.pp rather than initializing it from dcr.pp. This makes it
- * possible to distinguish fsyscall execution from other privileged execution.
+ * We get here for syscalls that don't have a lightweight
+ * handler. For those, we need to bubble down into the kernel
+ * and that requires setting up a minimal pt_regs structure,
+ * and initializing the CPU state more or less as if an
+ * interruption had occurred. To make syscall-restarts work,
+ * we setup pt_regs such that cr_iip points to the second
+ * instruction in syscall_via_break. Decrementing the IP
+ * hence will restart the syscall via break and not
+ * decrementing IP will return us to the caller, as usual.
+ * Note that we preserve the value of psr.pp rather than
+ * initializing it from dcr.pp. This makes it possible to
+ * distinguish fsyscall execution from other privileged
+ * execution.
*
* On entry:
- * - normal fsyscall handler register usage, except that we also have:
+ * - normal fsyscall handler register usage, except
+ * that we also have:
* - r18: address of syscall entry point
* - r21: ar.fpsr
* - r26: ar.pfs
* - r27: ar.rsc
* - r29: psr
+ *
+ * We used to clear some PSR bits here but that requires slow
+ * serialization. Fortuntely, that isn't really necessary.
+ * The rationale is as follows: we used to clear bits
+ * ~PSR_PRESERVED_BITS in PSR.L. Since
+ * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we
+ * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}.
+ * However,
+ *
+ * PSR.BE : already is turned off in __kernel_syscall_via_epc()
+ * PSR.AC : don't care (kernel normally turns PSR.AC on)
+ * PSR.I : already turned off by the time fsys_bubble_down gets
+ * invoked
+ * PSR.DFL: always 0 (kernel never turns it on)
+ * PSR.DFH: don't care --- kernel never touches f32-f127 on its own
+ * initiative
+ * PSR.DI : always 0 (kernel never turns it on)
+ * PSR.SI : always 0 (kernel never turns it on)
+ * PSR.DB : don't care --- kernel never enables kernel-level
+ * breakpoints
+ * PSR.TB : must be 0 already; if it wasn't zero on entry to
+ * __kernel_syscall_via_epc, the branch to fsys_bubble_down
+ * will trigger a taken branch; the taken-trap-handler then
+ * converts the syscall into a break-based system-call.
*/
-# define PSR_PRESERVED_BITS (IA64_PSR_UP | IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_PK \
- | IA64_PSR_DT | IA64_PSR_PP | IA64_PSR_SP | IA64_PSR_RT \
- | IA64_PSR_IC)
/*
- * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc. The rest we have
- * to synthesize.
+ * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.
+ * The rest we have to synthesize.
*/
-# define PSR_ONE_BITS ((3 << IA64_PSR_CPL0_BIT) | (0x1 << IA64_PSR_RI_BIT) \
+# define PSR_ONE_BITS ((3 << IA64_PSR_CPL0_BIT) \
+ | (0x1 << IA64_PSR_RI_BIT) \
| IA64_PSR_BN | IA64_PSR_I)
- invala
- movl r8=PSR_ONE_BITS
+ invala // M0|1
+ movl r14=ia64_ret_from_syscall // X
- mov r25=ar.unat // save ar.unat (5 cyc)
- movl r9=PSR_PRESERVED_BITS
+ nop.m 0
+ movl r28=__kernel_syscall_via_break // X create cr.iip
+ ;;
- mov ar.rsc=0 // set enforced lazy mode, pl 0, little-endian, loadrs=0
- movl r28=__kernel_syscall_via_break
+ mov r2=r16 // A get task addr to addl-addressable register
+ adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A
+ mov r31=pr // I0 save pr (2 cyc)
;;
- mov r23=ar.bspstore // save ar.bspstore (12 cyc)
- mov r31=pr // save pr (2 cyc)
- mov r20=r1 // save caller's gp in r20
+ st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag
+ addl r22=IA64_RBS_OFFSET,r2 // A compute base of RBS
+ add r3=TI_FLAGS+IA64_TASK_SIZE,r2 // A
;;
- mov r2=r16 // copy current task addr to addl-addressable register
- and r9=r9,r29
- mov r19=b6 // save b6 (2 cyc)
+ ld4 r3=[r3] // M0|1 r3 = current_thread_info()->flags
+ lfetch.fault.excl.nt1 [r22] // M0|1 prefetch register backing-store
+ nop.i 0
;;
- mov psr.l=r9 // slam the door (17 cyc to srlz.i)
- or r29=r8,r29 // construct cr.ipsr value to save
- addl r22=IA64_RBS_OFFSET,r2 // compute base of RBS
+ mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0
+ nop.m 0
+ nop.i 0
;;
- // GAS reports a spurious RAW hazard on the read of ar.rnat because it thinks
- // we may be reading ar.itc after writing to psr.l. Avoid that message with
- // this directive:
- dv_serialize_data
- mov.m r24=ar.rnat // read ar.rnat (5 cyc lat)
- lfetch.fault.excl.nt1 [r22]
- adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r2
-
- // ensure previous insn group is issued before we stall for srlz.i:
+ mov r23=ar.bspstore // M2 (12 cyc) save ar.bspstore
+ mov.m r24=ar.rnat // M2 (5 cyc) read ar.rnat (dual-issues!)
+ nop.i 0
;;
- srlz.i // ensure new psr.l has been established
- /////////////////////////////////////////////////////////////////////////////
- ////////// from this point on, execution is not interruptible anymore
- /////////////////////////////////////////////////////////////////////////////
- addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // compute base of memory stack
- cmp.ne pKStk,pUStk=r0,r0 // set pKStk <- 0, pUStk <- 1
+ mov ar.bspstore=r22 // M2 (6 cyc) switch to kernel RBS
+ movl r8=PSR_ONE_BITS // X
;;
- st1 [r16]=r0 // clear current->thread.on_ustack flag
- mov ar.bspstore=r22 // switch to kernel RBS
- mov b6=r18 // copy syscall entry-point to b6 (7 cyc)
- add r3=TI_FLAGS+IA64_TASK_SIZE,r2
+ mov r25=ar.unat // M2 (5 cyc) save ar.unat
+ mov r19=b6 // I0 save b6 (2 cyc)
+ mov r20=r1 // A save caller's gp in r20
;;
- ld4 r3=[r3] // r2 = current_thread_info()->flags
- mov r18=ar.bsp // save (kernel) ar.bsp (12 cyc)
- mov ar.rsc=0x3 // set eager mode, pl 0, little-endian, loadrs=0
- br.call.sptk.many b7=ia64_syscall_setup
- ;;
- ssm psr.i
- movl r2=ia64_ret_from_syscall
+ or r29=r8,r29 // A construct cr.ipsr value to save
+ mov b6=r18 // I0 copy syscall entry-point to b6 (7 cyc)
+ addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack
+
+ mov r18=ar.bsp // M2 save (kernel) ar.bsp (12 cyc)
+ cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1
+ br.call.sptk.many b7=ia64_syscall_setup // B
;;
- mov rp=r2 // set the real return addr
- and r3=_TIF_SYSCALL_TRACEAUDIT,r3
+ mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0
+ mov rp=r14 // I0 set the real return addr
+ and r3=_TIF_SYSCALL_TRACEAUDIT,r3 // A
;;
- cmp.eq p8,p0=r3,r0
+ ssm psr.i // M2 we're on kernel stacks now, reenable irqs
+ cmp.eq p8,p0=r3,r0 // A
+(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT
-(p10) br.cond.spnt.many ia64_ret_from_syscall // p10==true means out registers are more than 8
-(p8) br.call.sptk.many b6=b6 // ignore this return addr
- br.cond.sptk ia64_trace_syscall
+ nop.m 0
+(p8) br.call.sptk.many b6=b6 // B (ignore return address)
+ br.cond.spnt ia64_trace_syscall // B
END(fsys_bubble_down)
.rodata
diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S
index facf75acdc85..86948ce63e43 100644
--- a/arch/ia64/kernel/gate.S
+++ b/arch/ia64/kernel/gate.S
@@ -72,38 +72,40 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
* bundle get executed. The remaining code must be safe even if
* they do not get executed.
*/
- adds r17=-1024,r15
- mov r10=0 // default to successful syscall execution
- epc
+ adds r17=-1024,r15 // A
+ mov r10=0 // A default to successful syscall execution
+ epc // B causes split-issue
}
;;
- rsm psr.be // note: on McKinley "rsm psr.be/srlz.d" is slightly faster than "rum psr.be"
- LOAD_FSYSCALL_TABLE(r14)
-
- mov r16=IA64_KR(CURRENT) // 12 cycle read latency
- tnat.nz p10,p9=r15
- mov r19=NR_syscalls-1
+ rsm psr.be | psr.i // M2 (5 cyc to srlz.d)
+ LOAD_FSYSCALL_TABLE(r14) // X
;;
- shladd r18=r17,3,r14
-
- srlz.d
- cmp.ne p8,p0=r0,r0 // p8 <- FALSE
- /* Note: if r17 is a NaT, p6 will be set to zero. */
- cmp.geu p6,p7=r19,r17 // (syscall > 0 && syscall < 1024+NR_syscalls)?
- ;;
-(p6) ld8 r18=[r18]
- mov r21=ar.fpsr
- add r14=-8,r14 // r14 <- addr of fsys_bubble_down entry
- ;;
-(p6) mov b7=r18
-(p6) tbit.z p8,p0=r18,0
-(p8) br.dptk.many b7
-
-(p6) rsm psr.i
- mov r27=ar.rsc
- mov r26=ar.pfs
+ mov r16=IA64_KR(CURRENT) // M2 (12 cyc)
+ shladd r18=r17,3,r14 // A
+ mov r19=NR_syscalls-1 // A
+ ;;
+ lfetch [r18] // M0|1
+ mov r29=psr // M2 (12 cyc)
+ // If r17 is a NaT, p6 will be zero
+ cmp.geu p6,p7=r19,r17 // A (sysnr > 0 && sysnr < 1024+NR_syscalls)?
+ ;;
+ mov r21=ar.fpsr // M2 (12 cyc)
+ tnat.nz p10,p9=r15 // I0
+ mov.i r26=ar.pfs // I0 (would stall anyhow due to srlz.d...)
+ ;;
+ srlz.d // M0 (forces split-issue) ensure PSR.BE==0
+(p6) ld8 r18=[r18] // M0|1
+ nop.i 0
+ ;;
+ nop.m 0
+(p6) tbit.z.unc p8,p0=r18,0 // I0 (dual-issues with "mov b7=r18"!)
+ nop.i 0
;;
- mov r29=psr // read psr (12 cyc load latency)
+(p8) ssm psr.i
+(p6) mov b7=r18 // I0
+(p8) br.dptk.many b7 // B
+
+ mov r27=ar.rsc // M2 (12 cyc)
/*
* brl.cond doesn't work as intended because the linker would convert this branch
* into a branch to a PLT. Perhaps there will be a way to avoid this with some
@@ -111,6 +113,8 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
* instead.
*/
#ifdef CONFIG_ITANIUM
+(p6) add r14=-8,r14 // r14 <- addr of fsys_bubble_down entry
+ ;;
(p6) ld8 r14=[r14] // r14 <- fsys_bubble_down
;;
(p6) mov b7=r14
@@ -118,7 +122,7 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
#else
BRL_COND_FSYS_BUBBLE_DOWN(p6)
#endif
-
+ ssm psr.i
mov r10=-1
(p10) mov r8=EINVAL
(p9) mov r8=ENOSYS
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 7bbf019c9867..01572814abe4 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -58,9 +58,6 @@ EXPORT_SYMBOL(__strlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
-#include <asm/unistd.h>
-EXPORT_SYMBOL(__ia64_syscall);
-
/* from arch/ia64/lib */
extern void __divsi3(void);
extern void __udivsi3(void);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 2bc085a73e30..3bb3a13c4047 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1,7 +1,7 @@
/*
* arch/ia64/kernel/ivt.S
*
- * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ * Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
* David Mosberger <davidm@hpl.hp.com>
* Copyright (C) 2000, 2002-2003 Intel Co
@@ -692,82 +692,118 @@ ENTRY(break_fault)
* to prevent leaking bits from kernel to user level.
*/
DBG_FAULT(11)
- mov r16=IA64_KR(CURRENT) // r16 = current task; 12 cycle read lat.
- mov r17=cr.iim
- mov r18=__IA64_BREAK_SYSCALL
- mov r21=ar.fpsr
- mov r29=cr.ipsr
- mov r19=b6
- mov r25=ar.unat
- mov r27=ar.rsc
- mov r26=ar.pfs
- mov r28=cr.iip
- mov r31=pr // prepare to save predicates
- mov r20=r1
- ;;
+ mov.m r16=IA64_KR(CURRENT) // M2 r16 <- current task (12 cyc)
+ mov r29=cr.ipsr // M2 (12 cyc)
+ mov r31=pr // I0 (2 cyc)
+
+ mov r17=cr.iim // M2 (2 cyc)
+ mov.m r27=ar.rsc // M2 (12 cyc)
+ mov r18=__IA64_BREAK_SYSCALL // A
+
+ mov.m ar.rsc=0 // M2
+ mov.m r21=ar.fpsr // M2 (12 cyc)
+ mov r19=b6 // I0 (2 cyc)
+ ;;
+ mov.m r23=ar.bspstore // M2 (12 cyc)
+ mov.m r24=ar.rnat // M2 (5 cyc)
+ mov.i r26=ar.pfs // I0 (2 cyc)
+
+ invala // M0|1
+ nop.m 0 // M
+ mov r20=r1 // A save r1
+
+ nop.m 0
+ movl r30=sys_call_table // X
+
+ mov r28=cr.iip // M2 (2 cyc)
+ cmp.eq p0,p7=r18,r17 // I0 is this a system call?
+(p7) br.cond.spnt non_syscall // B no ->
+ //
+ // From this point on, we are definitely on the syscall-path
+ // and we can use (non-banked) scratch registers.
+ //
+///////////////////////////////////////////////////////////////////////
+ mov r1=r16 // A move task-pointer to "addl"-addressable reg
+ mov r2=r16 // A setup r2 for ia64_syscall_setup
+ add r9=TI_FLAGS+IA64_TASK_SIZE,r16 // A r9 = &current_thread_info()->flags
+
adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16
- cmp.eq p0,p7=r18,r17 // is this a system call? (p7 <- false, if so)
-(p7) br.cond.spnt non_syscall
+ adds r15=-1024,r15 // A subtract 1024 from syscall number
+ mov r3=NR_syscalls - 1
;;
- ld1 r17=[r16] // load current->thread.on_ustack flag
- st1 [r16]=r0 // clear current->thread.on_ustack flag
- add r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // set r1 for MINSTATE_START_SAVE_MIN_VIRT
+ ld1.bias r17=[r16] // M0|1 r17 = current->thread.on_ustack flag
+ ld4 r9=[r9] // M0|1 r9 = current_thread_info()->flags
+ extr.u r8=r29,41,2 // I0 extract ei field from cr.ipsr
+
+ shladd r30=r15,3,r30 // A r30 = sys_call_table + 8*(syscall-1024)
+ addl r22=IA64_RBS_OFFSET,r1 // A compute base of RBS
+ cmp.leu p6,p7=r15,r3 // A syscall number in range?
;;
- invala
- /* adjust return address so we skip over the break instruction: */
+ lfetch.fault.excl.nt1 [r22] // M0|1 prefetch RBS
+(p6) ld8 r30=[r30] // M0|1 load address of syscall entry point
+ tnat.nz.or p7,p0=r15 // I0 is syscall nr a NaT?
- extr.u r8=r29,41,2 // extract ei field from cr.ipsr
- ;;
- cmp.eq p6,p7=2,r8 // isr.ei==2?
- mov r2=r1 // setup r2 for ia64_syscall_setup
- ;;
-(p6) mov r8=0 // clear ei to 0
-(p6) adds r28=16,r28 // switch cr.iip to next bundle cr.ipsr.ei wrapped
-(p7) adds r8=1,r8 // increment ei to next slot
- ;;
- cmp.eq pKStk,pUStk=r0,r17 // are we in kernel mode already?
- dep r29=r8,r29,41,2 // insert new ei into cr.ipsr
+ mov.m ar.bspstore=r22 // M2 switch to kernel RBS
+ cmp.eq p8,p9=2,r8 // A isr.ei==2?
;;
- // switch from user to kernel RBS:
- MINSTATE_START_SAVE_MIN_VIRT
- br.call.sptk.many b7=ia64_syscall_setup
- ;;
- MINSTATE_END_SAVE_MIN_VIRT // switch to bank 1
- ssm psr.ic | PSR_DEFAULT_BITS
- ;;
- srlz.i // guarantee that interruption collection is on
- mov r3=NR_syscalls - 1
- ;;
-(p15) ssm psr.i // restore psr.i
- // p10==true means out registers are more than 8 or r15's Nat is true
-(p10) br.cond.spnt.many ia64_ret_from_syscall
- ;;
- movl r16=sys_call_table
+(p8) mov r8=0 // A clear ei to 0
+(p7) movl r30=sys_ni_syscall // X
- adds r15=-1024,r15 // r15 contains the syscall number---subtract 1024
- movl r2=ia64_ret_from_syscall
- ;;
- shladd r20=r15,3,r16 // r20 = sys_call_table + 8*(syscall-1024)
- cmp.leu p6,p7=r15,r3 // (syscall > 0 && syscall < 1024 + NR_syscalls) ?
- mov rp=r2 // set the real return addr
+(p8) adds r28=16,r28 // A switch cr.iip to next bundle
+(p9) adds r8=1,r8 // A increment ei to next slot
+ nop.i 0
;;
-(p6) ld8 r20=[r20] // load address of syscall entry point
-(p7) movl r20=sys_ni_syscall
- add r2=TI_FLAGS+IA64_TASK_SIZE,r13
- ;;
- ld4 r2=[r2] // r2 = current_thread_info()->flags
- ;;
- and r2=_TIF_SYSCALL_TRACEAUDIT,r2 // mask trace or audit
+ mov.m r25=ar.unat // M2 (5 cyc)
+ dep r29=r8,r29,41,2 // I0 insert new ei into cr.ipsr
+ adds r15=1024,r15 // A restore original syscall number
+ //
+ // If any of the above loads miss in L1D, we'll stall here until
+ // the data arrives.
+ //
+///////////////////////////////////////////////////////////////////////
+ st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag
+ mov b6=r30 // I0 setup syscall handler branch reg early
+ cmp.eq pKStk,pUStk=r0,r17 // A were we on kernel stacks already?
+
+ and r9=_TIF_SYSCALL_TRACEAUDIT,r9 // A mask trace or audit
+ mov r18=ar.bsp // M2 (12 cyc)
+(pKStk) br.cond.spnt .break_fixup // B we're already in kernel-mode -- fix up RBS
+ ;;
+.back_from_break_fixup:
+(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1 // A compute base of memory stack
+ cmp.eq p14,p0=r9,r0 // A are syscalls being traced/audited?
+ br.call.sptk.many b7=ia64_syscall_setup // B
+1:
+ mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0
+ nop 0
+ bsw.1 // B (6 cyc) regs are saved, switch to bank 1
;;
- cmp.eq p8,p0=r2,r0
- mov b6=r20
+
+ ssm psr.ic | PSR_DEFAULT_BITS // M2 now it's safe to re-enable intr.-collection
+ movl r3=ia64_ret_from_syscall // X
;;
-(p8) br.call.sptk.many b6=b6 // ignore this return addr
- br.cond.sptk ia64_trace_syscall
+
+ srlz.i // M0 ensure interruption collection is on
+ mov rp=r3 // I0 set the real return addr
+(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT
+
+(p15) ssm psr.i // M2 restore psr.i
+(p14) br.call.sptk.many b6=b6 // B invoke syscall-handker (ignore return addr)
+ br.cond.spnt.many ia64_trace_syscall // B do syscall-tracing thingamagic
// NOT REACHED
+///////////////////////////////////////////////////////////////////////
+ // On entry, we optimistically assumed that we're coming from user-space.
+ // For the rare cases where a system-call is done from within the kernel,
+ // we fix things up at this point:
+.break_fixup:
+ add r1=-IA64_PT_REGS_SIZE,sp // A allocate space for pt_regs structure
+ mov ar.rnat=r24 // M2 restore kernel's AR.RNAT
+ ;;
+ mov ar.bspstore=r23 // M2 restore kernel's AR.BSPSTORE
+ br.cond.sptk .back_from_break_fixup
END(break_fault)
.org ia64_ivt+0x3000
@@ -842,8 +878,6 @@ END(interrupt)
* - r31: saved pr
* - b0: original contents (to be saved)
* On exit:
- * - executing on bank 1 registers
- * - psr.ic enabled, interrupts restored
* - p10: TRUE if syscall is invoked with more than 8 out
* registers or r15's Nat is true
* - r1: kernel's gp
@@ -851,8 +885,11 @@ END(interrupt)
* - r8: -EINVAL if p10 is true
* - r12: points to kernel stack
* - r13: points to current task
+ * - r14: preserved (same as on entry)
+ * - p13: preserved
* - p15: TRUE if interrupts need to be re-enabled
* - ar.fpsr: set to kernel settings
+ * - b6: preserved (same as on entry)
*/
GLOBAL_ENTRY(ia64_syscall_setup)
#if PT(B6) != 0
@@ -920,10 +957,10 @@ GLOBAL_ENTRY(ia64_syscall_setup)
(p13) mov in5=-1
;;
st8 [r16]=r21,PT(R8)-PT(AR_FPSR) // save ar.fpsr
- tnat.nz p14,p0=in6
+ tnat.nz p13,p0=in6
cmp.lt p10,p9=r11,r8 // frame size can't be more than local+8
;;
- stf8 [r16]=f1 // ensure pt_regs.r8 != 0 (see handle_syscall_error)
+ mov r8=1
(p9) tnat.nz p10,p0=r15
adds r12=-16,r1 // switch to kernel memory stack (with 16 bytes of scratch)
@@ -934,9 +971,9 @@ GLOBAL_ENTRY(ia64_syscall_setup)
mov r13=r2 // establish `current'
movl r1=__gp // establish kernel global pointer
;;
-(p14) mov in6=-1
+ st8 [r16]=r8 // ensure pt_regs.r8 != 0 (see handle_syscall_error)
+(p13) mov in6=-1
(p8) mov in7=-1
- nop.i 0
cmp.eq pSys,pNonSys=r0,r0 // set pSys=1, pNonSys=0
movl r17=FPSR_DEFAULT
@@ -1007,6 +1044,8 @@ END(dispatch_illegal_op_fault)
FAULT(17)
ENTRY(non_syscall)
+ mov ar.rsc=r27 // restore ar.rsc before SAVE_MIN_WITH_COVER
+ ;;
SAVE_MIN_WITH_COVER
// There is no particular reason for this code to be here, other than that
@@ -1204,6 +1243,25 @@ END(disabled_fp_reg)
// 0x5600 Entry 26 (size 16 bundles) Nat Consumption (11,23,37,50)
ENTRY(nat_consumption)
DBG_FAULT(26)
+
+ mov r16=cr.ipsr
+ mov r17=cr.isr
+ mov r31=pr // save PR
+ ;;
+ and r18=0xf,r17 // r18 = cr.ipsr.code{3:0}
+ tbit.z p6,p0=r17,IA64_ISR_NA_BIT
+ ;;
+ cmp.ne.or p6,p0=IA64_ISR_CODE_LFETCH,r18
+ dep r16=-1,r16,IA64_PSR_ED_BIT,1
+(p6) br.cond.spnt 1f // branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
+ ;;
+ mov cr.ipsr=r16 // set cr.ipsr.na
+ mov pr=r31,-1
+ ;;
+ rfi
+
+1: mov pr=r31,-1
+ ;;
FAULT(26)
END(nat_consumption)
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 6d57aebad485..bbb8bc7c0552 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -725,12 +725,32 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs *pt,
break;
}
+ /*
+ * Note: at the time of this call, the target task is blocked
+ * in notify_resume_user() and by clearling PRED_LEAVE_SYSCALL
+ * (aka, "pLvSys") we redirect execution from
+ * .work_pending_syscall_end to .work_processed_kernel.
+ */
unw_get_pr(&prev_info, &pr);
- pr &= ~(1UL << PRED_SYSCALL);
+ pr &= ~((1UL << PRED_SYSCALL) | (1UL << PRED_LEAVE_SYSCALL));
pr |= (1UL << PRED_NON_SYSCALL);
unw_set_pr(&prev_info, pr);
pt->cr_ifs = (1UL << 63) | cfm;
+ /*
+ * Clear the memory that is NOT written on syscall-entry to
+ * ensure we do not leak kernel-state to user when execution
+ * resumes.
+ */
+ pt->r2 = 0;
+ pt->r3 = 0;
+ pt->r14 = 0;
+ memset(&pt->r16, 0, 16*8); /* clear r16-r31 */
+ memset(&pt->f6, 0, 6*16); /* clear f6-f11 */
+ pt->b7 = 0;
+ pt->ar_ccv = 0;
+ pt->ar_csd = 0;
+ pt->ar_ssd = 0;
}
static int
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index d14692e0920a..2693e1522d7c 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -72,6 +72,8 @@ DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8);
unsigned long ia64_cycles_per_usec;
struct ia64_boot_param *ia64_boot_param;
struct screen_info screen_info;
+unsigned long vga_console_iobase;
+unsigned long vga_console_membase;
unsigned long ia64_max_cacheline_size;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
@@ -273,23 +275,25 @@ io_port_init (void)
static inline int __init
early_console_setup (char *cmdline)
{
+ int earlycons = 0;
+
#ifdef CONFIG_SERIAL_SGI_L1_CONSOLE
{
extern int sn_serial_console_early_setup(void);
if (!sn_serial_console_early_setup())
- return 0;
+ earlycons++;
}
#endif
#ifdef CONFIG_EFI_PCDP
if (!efi_setup_pcdp_console(cmdline))
- return 0;
+ earlycons++;
#endif
#ifdef CONFIG_SERIAL_8250_CONSOLE
if (!early_serial_console_init(cmdline))
- return 0;
+ earlycons++;
#endif
- return -1;
+ return (earlycons) ? 0 : -1;
}
static inline void
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index b49d4ddaab93..0166a9847095 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -231,13 +231,16 @@ smp_flush_tlb_all (void)
void
smp_flush_tlb_mm (struct mm_struct *mm)
{
+ preempt_disable();
/* this happens for the common case of a single-threaded fork(): */
if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
{
local_finish_flush_tlb_mm(mm);
+ preempt_enable();
return;
}
+ preempt_enable();
/*
* We could optimize this further by using mm->cpu_vm_mask to track which CPUs
* have been running in the address space. It's not clear that this is worth the
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 9e07f5463f21..783eb4323847 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -384,7 +384,7 @@ static int __init sn_pci_init(void)
extern void register_sn_procfs(void);
#endif
- if (!ia64_platform_is("sn2") || IS_RUNNING_ON_SIMULATOR())
+ if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
return 0;
/*
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index fec6d8b8237b..7ce3cdad627b 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -9,12 +9,16 @@
#include <linux/module.h>
#include <asm/io.h>
#include <asm/delay.h>
+#include <asm/vga.h>
#include <asm/sn/nodepda.h>
#include <asm/sn/simulator.h>
#include <asm/sn/pda.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/shub_mmr.h>
+#define IS_LEGACY_VGA_IOPORT(p) \
+ (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df))
+
/**
* sn_io_addr - convert an in/out port to an i/o address
* @port: port to convert
@@ -26,6 +30,8 @@
void *sn_io_addr(unsigned long port)
{
if (!IS_RUNNING_ON_SIMULATOR()) {
+ if (IS_LEGACY_VGA_IOPORT(port))
+ port += vga_console_iobase;
/* On sn2, legacy I/O ports don't point at anything */
if (port < (64 * 1024))
return NULL;
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 44bfc7f318cb..22e10d282c7f 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -36,6 +36,7 @@
#include <asm/machvec.h>
#include <asm/system.h>
#include <asm/processor.h>
+#include <asm/vga.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
#include <asm/sn/pda.h>
@@ -95,6 +96,7 @@ u8 sn_coherency_id;
EXPORT_SYMBOL(sn_coherency_id);
u8 sn_region_size;
EXPORT_SYMBOL(sn_region_size);
+int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
short physical_node_map[MAX_PHYSNODE_ID];
@@ -273,14 +275,17 @@ void __init sn_setup(char **cmdline_p)
ia64_sn_plat_set_error_handling_features();
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
/*
- * If the generic code has enabled vga console support - lets
- * get rid of it again. This is a kludge for the fact that ACPI
- * currtently has no way of informing us if legacy VGA is available
- * or not.
+ * If there was a primary vga adapter identified through the
+ * EFI PCDP table, make it the preferred console. Otherwise
+ * zero out conswitchp.
*/
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
- if (conswitchp == &vga_con) {
+
+ if (vga_console_membase) {
+ /* usable vga ... make tty0 the preferred default console */
+ add_preferred_console("tty", 0, NULL);
+ } else {
printk(KERN_DEBUG "SGI: Disabling VGA console\n");
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
@@ -350,7 +355,7 @@ void __init sn_setup(char **cmdline_p)
ia64_mark_idle = &snidle;
- /*
+ /*
* For the bootcpu, we do this here. All other cpus will make the
* call as part of cpu_init in slave cpu initialization.
*/
@@ -397,7 +402,7 @@ static void __init sn_init_pdas(char **cmdline_p)
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
- memset(nodepdaindr[cnode]->phys_cpuid, -1,
+ memset(nodepdaindr[cnode]->phys_cpuid, -1,
sizeof(nodepdaindr[cnode]->phys_cpuid));
}
@@ -427,7 +432,7 @@ static void __init sn_init_pdas(char **cmdline_p)
}
/*
- * Initialize the per node hubdev. This includes IO Nodes and
+ * Initialize the per node hubdev. This includes IO Nodes and
* headless/memless nodes.
*/
for (cnode = 0; cnode < numionodes; cnode++) {
@@ -455,6 +460,14 @@ void __init sn_cpu_init(void)
int i;
static int wars_have_been_checked;
+ if (smp_processor_id() == 0 && IS_MEDUSA()) {
+ if (ia64_sn_is_fake_prom())
+ sn_prom_type = 2;
+ else
+ sn_prom_type = 1;
+ printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+ }
+
memset(pda, 0, sizeof(pda));
if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
&sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
@@ -520,7 +533,7 @@ void __init sn_cpu_init(void)
*/
{
u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
- u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
+ u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
u64 *pio;
pio = is_shub1() ? pio1 : pio2;
@@ -552,6 +565,10 @@ static void __init scan_for_ionodes(void)
int nasid = 0;
lboard_t *brd;
+ /* fakeprom does not support klgraph */
+ if (IS_RUNNING_ON_FAKE_PROM())
+ return;
+
/* Setup ionodes with memory */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
char *klgraph_header;
@@ -563,8 +580,6 @@ static void __init scan_for_ionodes(void)
cnodeid = -1;
klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
if (!klgraph_header) {
- if (IS_RUNNING_ON_SIMULATOR())
- continue;
BUG(); /* All nodes must have klconfig tables! */
}
cnodeid = nasid_to_cnodeid(nasid);
@@ -630,8 +645,8 @@ int
nasid_slice_to_cpuid(int nasid, int slice)
{
long cpu;
-
- for (cpu=0; cpu < NR_CPUS; cpu++)
+
+ for (cpu=0; cpu < NR_CPUS; cpu++)
if (cpuid_to_nasid(cpu) == nasid &&
cpuid_to_slice(cpu) == slice)
return cpu;
diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
index 7947312801ec..96cb71d15682 100644
--- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
+++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S
@@ -6,6 +6,7 @@
* Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
*/
+#include <asm/types.h>
#include <asm/sn/shub_mmr.h>
#define DEADLOCKBIT SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index a087b274847e..8716f4d5314b 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -204,8 +204,8 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
cx_dev->dev.parent = NULL;
cx_dev->dev.bus = &tiocx_bus_type;
cx_dev->dev.release = tiocx_bus_release;
- snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d.0x%x",
- cx_dev->cx_id.nasid, cx_dev->cx_id.part_num);
+ snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d",
+ cx_dev->cx_id.nasid);
device_register(&cx_dev->dev);
get_device(&cx_dev->dev);
@@ -236,7 +236,6 @@ int cx_device_unregister(struct cx_dev *cx_dev)
*/
static int cx_device_reload(struct cx_dev *cx_dev)
{
- device_remove_file(&cx_dev->dev, &dev_attr_cxdev_control);
cx_device_unregister(cx_dev);
return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
cx_dev->cx_id.mfg_num, cx_dev->hubdev);
@@ -383,6 +382,7 @@ static int is_fpga_brick(int nasid)
switch (tiocx_btchar_get(nasid)) {
case L1_BRICKTYPE_SA:
case L1_BRICKTYPE_ATHENA:
+ case L1_BRICKTYPE_DAYTONA:
return 1;
}
return 0;
@@ -409,7 +409,7 @@ static int tiocx_reload(struct cx_dev *cx_dev)
uint64_t cx_id;
cx_id =
- *(volatile int32_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+ *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
WIDGET_ID);
part_num = XWIDGET_PART_NUM(cx_id);
mfg_num = XWIDGET_MFG_NUM(cx_id);
@@ -458,6 +458,10 @@ static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *
switch (n) {
case 1:
+ tio_corelet_reset(cx_dev->cx_id.nasid, TIOCX_CORELET);
+ tiocx_reload(cx_dev);
+ break;
+ case 2:
tiocx_reload(cx_dev);
break;
case 3:
@@ -537,7 +541,7 @@ static void __exit tiocx_exit(void)
bus_unregister(&tiocx_bus_type);
}
-module_init(tiocx_init);
+subsys_initcall(tiocx_init);
module_exit(tiocx_exit);
/************************************************************************
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 8dae9eb45456..05aa8c2fe9bb 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -336,7 +336,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
if (!ct_addr)
return 0;
- bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffff);
+ bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffffUL);
node_upper = ct_addr >> 48;
if (node_upper > 64) {
@@ -464,7 +464,7 @@ map_return:
* For mappings created using the direct modes (64 or 48) there are no
* resources to release.
*/
-void
+static void
tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
{
int i, entry;
@@ -514,7 +514,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
* The mapping mode used is based on the devices dma_mask. As a last resort
* use the GART mapped mode.
*/
-uint64_t
+static uint64_t
tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
{
uint64_t mapaddr;
@@ -580,7 +580,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
* On successful setup, returns the kernel version of tioca_common back to
* the caller.
*/
-void *
+static void *
tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft)
{
struct tioca_common *tioca_common;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:52:20 +0000