summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig11
-rw-r--r--arch/arm/Kconfig.debug1
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi28
-rw-r--r--arch/arm/boot/dts/dbx5x0.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi9
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi6
-rw-r--r--arch/arm/boot/dts/href.dtsi2
-rw-r--r--arch/arm/boot/dts/hrefv60plus.dts2
-rw-r--r--arch/arm/boot/dts/snowball.dts2
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi2
-rw-r--r--arch/arm/kernel/smp.c2
-rw-r--r--arch/arm/lib/memset.S33
-rw-r--r--arch/arm/mach-at91/board-foxg20.c1
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c1
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h8
-rw-r--r--arch/arm/mach-at91/irq.c20
-rw-r--r--arch/arm/mach-at91/pm.c10
-rw-r--r--arch/arm/mach-davinci/dma.c3
-rw-r--r--arch/arm/mach-footbridge/Kconfig1
-rw-r--r--arch/arm/mach-imx/clk-imx35.c1
-rw-r--r--arch/arm/mach-imx/imx25-dt.c5
-rw-r--r--arch/arm/mach-ixp4xx/vulcan-setup.c1
-rw-r--r--arch/arm/mach-mmp/gplugd.c1
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c24
-rw-r--r--arch/arm/mach-pxa/raumfeld.c1
-rw-r--r--arch/arm/mach-s5pv210/clock.c36
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c2
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c1
-rw-r--r--arch/arm/mm/dma-mapping.c5
-rw-r--r--arch/arm/net/bpf_jit_32.c2
31 files changed, 141 insertions, 85 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c3bdce15134..13b739469c51 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -49,7 +49,6 @@ config ARM
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
@@ -743,6 +742,7 @@ config ARCH_RPC
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
+ select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -878,6 +878,7 @@ config ARCH_SHARK
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
+ select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
@@ -1005,12 +1006,12 @@ config ARCH_MULTI_V4_V5
bool
config ARCH_MULTI_V6
- bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
- bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
@@ -1461,10 +1462,6 @@ config ISA_DMA
bool
select ISA_DMA_API
-config ARCH_NO_VIRT_TO_BUS
- def_bool y
- depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
# Select ISA DMA interface
config ISA_DMA_API
bool
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ecfcdba2d17c..9b31f4311ea2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -495,6 +495,7 @@ config DEBUG_IMX_UART_PORT
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
+ depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index aa98e641931f..a98c0d50fbbe 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -238,8 +238,32 @@
nand {
pinctrl_nand: nand-0 {
atmel,pins =
- <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
- 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ <3 0 0x1 0x0 /* PD0 periph A Read Enable */
+ 3 1 0x1 0x0 /* PD1 periph A Write Enable */
+ 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
+ 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
+ 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
+ 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
+ 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
+ 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
+ 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
+ 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
+ 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
+ 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
+ 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
+ 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
+ };
+
+ pinctrl_nand_16bits: nand_16bits-0 {
+ atmel,pins =
+ <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
+ 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
+ 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
+ 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
+ 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
+ 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
+ 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
+ 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 69140ba99f46..9de93096601a 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -319,9 +319,8 @@
};
};
- ab8500@5 {
+ ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupt-parent = <&intc>;
interrupts = <0 40 0x4>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e1347fceb5bc..1a62bcf18aa3 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -275,18 +275,27 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 5f3562ad6746..9a99755920c0 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -142,12 +142,18 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 592fb9dc35bd..379128eb9d98 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -221,7 +221,7 @@
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 55f4191a626e..2b587a74b813 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -158,7 +158,7 @@
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 27f31a5fa494..d3ec32f6b790 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -298,7 +298,7 @@
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 48d00a099ce3..3d3f64d2111a 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -385,7 +385,7 @@
spi@7000d800 {
compatible = "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 9d87a3ffe998..dbf46c272562 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -372,7 +372,7 @@
spi@7000d800 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 31644f1978d5..79078edbb9bc 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
evt->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
- evt->rating = 400;
+ evt->rating = 100;
evt->mult = 1;
evt->set_mode = broadcast_timer_set_mode;
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index d912e7397ecc..94b0650ea98f 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -14,31 +14,15 @@
.text
.align 5
- .word 0
-
-1: subs r2, r2, #4 @ 1 do we have enough
- blt 5f @ 1 bytes to align with?
- cmp r3, #2 @ 1
- strltb r1, [ip], #1 @ 1
- strleb r1, [ip], #1 @ 1
- strb r1, [ip], #1 @ 1
- add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted. Try doing the
- * memset again.
- */
ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
- mov ip, r0
- ands r3, ip, #3 @ 1 unaligned?
- bne 1b @ 1
+ ands r3, r0, #3 @ 1 unaligned?
+ mov ip, r0 @ preserve r0 as return value
+ bne 6f @ 1
/*
* we know that the pointer in ip is aligned to a word boundary.
*/
- orr r1, r1, r1, lsl #8
+1: orr r1, r1, r1, lsl #8
orr r1, r1, r1, lsl #16
mov r3, r1
cmp r2, #16
@@ -127,4 +111,13 @@ ENTRY(memset)
tst r2, #1
strneb r1, [ip], #1
mov pc, lr
+
+6: subs r2, r2, #4 @ 1 do we have enough
+ blt 5b @ 1 bytes to align with?
+ cmp r3, #2 @ 1
+ strltb r1, [ip], #1 @ 1
+ strleb r1, [ip], #1 @ 1
+ strb r1, [ip], #1 @ 1
+ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
+ b 1b
ENDPROC(memset)
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 2ea7059b840b..c20a870ea9c9 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index a033b8df9fb2..869cbecf00b7 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = {
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index eed465ab0dd7..5fc23771c154 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 8e210262aeee..e0ca59171022 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
void at91_irq_suspend(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable enabled irqs */
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable wakeup irqs */
- i = 0;
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *backups);
@@ -118,23 +116,21 @@ void at91_irq_suspend(void)
void at91_irq_resume(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable wakeup irqs */
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable irqs disabled for suspend */
- i = 0;
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *wakeups);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index adb6db888a1f..73f1f250403a 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz;
static int at91_pm_enter(suspend_state_t state)
{
- at91_gpio_suspend();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_suspend();
+ else
+ at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
@@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state)
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
- at91_gpio_resume();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_resume();
+ else
+ at91_gpio_resume();
return 0;
}
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index a685e9706b7b..45b7c71d9cc1 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index abda5a18a664..0f2111a11315 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -67,6 +67,7 @@ config ARCH_NETWINDER
select ISA
select ISA_DMA
select PCI
+ select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 74e3a34d78b8..e13a8fa5e62c 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -264,6 +264,7 @@ int __init mx35_clocks_init(void)
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 03b65e5ea541..82348391582a 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = {
NULL
};
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index d42730a1d4ab..d599e354ca57 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = {
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index d1e2d595e79c..f62b68d926f4 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,6 +9,7 @@
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 3218f1f2c0e0..e7b781d3788f 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -41,8 +41,6 @@ static struct fb_videomode mx23evk_video_modes[] = {
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
@@ -59,8 +57,6 @@ static struct fb_videomode mx28evk_video_modes[] = {
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
@@ -77,7 +73,6 @@ static struct fb_videomode m28evk_video_modes[] = {
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
},
};
@@ -94,9 +89,7 @@ static struct fb_videomode apx4devkit_video_modes[] = {
.lower_margin = 13,
.hsync_len = 48,
.vsync_len = 3,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
@@ -113,9 +106,7 @@ static struct fb_videomode apf28dev_video_modes[] = {
.lower_margin = 0x15,
.hsync_len = 64,
.vsync_len = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
@@ -132,7 +123,6 @@ static struct fb_videomode cfa10049_video_modes[] = {
.lower_margin = 2,
.hsync_len = 15,
.vsync_len = 15,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
},
};
@@ -259,6 +249,8 @@ static void __init imx23_evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static inline void enable_clk_enet_out(void)
@@ -278,6 +270,8 @@ static void __init imx28_evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
@@ -297,6 +291,7 @@ static void __init m28evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init sc_sps1_init(void)
@@ -322,6 +317,8 @@ static void __init apx4devkit_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
@@ -407,6 +404,7 @@ static void __init cfa10049_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init cfa10037_init(void)
@@ -423,6 +421,8 @@ static void __init apf28_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static void __init mxs_machine_init(void)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index af41888acbd6..969b0ba7fa70 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
+ .ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index fcdf52dbcc49..f051f53e35b7 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = {
.name = "pcmcdclk",
};
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
@@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = {
static struct clk init_clocks_off[] = {
{
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
.name = "rot",
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
@@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = {
.ctrlbit = (1<<19),
};
+static struct clk clk_pdma0 = {
+ .name = "pdma0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "pdma1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
@@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = {
&clk_hsmmc1,
&clk_hsmmc2,
&clk_hsmmc3,
+ &clk_pdma0,
+ &clk_pdma1,
};
/* Clock initialisation code */
@@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
};
void __init s5pv210_register_clocks(void)
@@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
- s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 3a38f7b34b94..e373de44a8b6 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .bus_type = FIMC_BUS_TYPE_ITU_601,
+ .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index cdcb799e802f..fec49ebc359a 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -32,6 +32,7 @@
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/usb/otg.h>
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c7e3759f16d3..e9db6b4bf65a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -342,6 +342,7 @@ static int __init atomic_pool_init(void)
{
struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+ gfp_t gfp = GFP_KERNEL | GFP_DMA;
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
@@ -361,8 +362,8 @@ static int __init atomic_pool_init(void)
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
- ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
- &page, atomic_pool_init);
+ ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
+ atomic_pool_init);
if (ptr) {
int i;
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 6828ef6ce80e..a0bd8a755bdf 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -576,7 +576,7 @@ load_ind:
/* x = ((*(frame + k)) & 0xf) << 2; */
ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
/* the interpreter should deal with the negative K */
- if (k < 0)
+ if ((int)k < 0)
return -1;
/* offset in r1: we might have to take the slow path */
emit_mov_i(r_off, k, ctx);