diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6ull-pinfunc-snvs.h | 2 | ||||
| -rw-r--r-- | arch/arm/configs/imx_v4_v5_defconfig | 3 | ||||
| -rw-r--r-- | arch/arm/configs/imx_v6_v7_defconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/cpuidle-imx6q.c | 27 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-imx51.c | 1 |
8 files changed, 22 insertions, 24 deletions
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index b715ab0fa1ff..e8d800fec637 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -114,9 +114,9 @@ reg = <2>; }; - switch@0 { + switch@10 { compatible = "qca,qca8334"; - reg = <0>; + reg = <10>; switch_ports: ports { #address-cells = <1>; @@ -125,7 +125,7 @@ ethphy0: port@0 { reg = <0>; label = "cpu"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; ethernet = <&fec>; fixed-link { diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 1d1b4bd0670f..a4217f564a53 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -264,7 +264,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh = <4>; + bus-width = <4>; no-1-8-v; status = "okay"; }; @@ -275,7 +275,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh = <8>; + bus-width = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 433bf09a1954..027df06c5dc7 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -91,6 +91,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-handle = <ðphy>; phy-mode = "rgmii"; + phy-reset-duration = <10>; /* in msecs */ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; phy-supply = <&vdd_eth_io_reg>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h index f6fb6783c193..54cfe72295aa 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. * Copyright (C) 2017 NXP diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 8661dd9b064a..b37f8e675e40 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -170,6 +170,9 @@ CONFIG_IMX_SDMA=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_FSL_MX25_ADC=y +CONFIG_PWM=y +CONFIG_PWM_IMX1=y +CONFIG_PWM_IMX27=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5586a5074a96..50fb01d70b10 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -398,7 +398,7 @@ CONFIG_MAG3110=y CONFIG_MPL3115=y CONFIG_PWM=y CONFIG_PWM_FSL_FTM=y -CONFIG_PWM_IMX=y +CONFIG_PWM_IMX27=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_VF610_OCOTP=y CONFIG_TEE=y diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index bfeb25aaf9a2..326e870d7123 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -16,30 +16,23 @@ #include "cpuidle.h" #include "hardware.h" -static atomic_t master = ATOMIC_INIT(0); -static DEFINE_SPINLOCK(master_lock); +static int num_idle_cpus = 0; +static DEFINE_SPINLOCK(cpuidle_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - if (atomic_inc_return(&master) == num_online_cpus()) { - /* - * With this lock, we prevent other cpu to exit and enter - * this function again and become the master. - */ - if (!spin_trylock(&master_lock)) - goto idle; + spin_lock(&cpuidle_lock); + if (++num_idle_cpus == num_online_cpus()) imx6_set_lpm(WAIT_UNCLOCKED); - cpu_do_idle(); - imx6_set_lpm(WAIT_CLOCKED); - spin_unlock(&master_lock); - goto done; - } + spin_unlock(&cpuidle_lock); -idle: cpu_do_idle(); -done: - atomic_dec(&master); + + spin_lock(&cpuidle_lock); + if (num_idle_cpus-- == num_online_cpus()) + imx6_set_lpm(WAIT_CLOCKED); + spin_unlock(&cpuidle_lock); return index; } diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index c7169c2f94c4..08c7892866c2 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -59,6 +59,7 @@ static void __init imx51_m4if_setup(void) return; m4if_base = of_iomap(np, 0); + of_node_put(np); if (!m4if_base) { pr_err("Unable to map M4IF registers\n"); return; |