summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap')
-rw-r--r--arch/arm/plat-omap/Makefile3
-rw-r--r--arch/arm/plat-omap/common.c1
-rw-r--r--arch/arm/plat-omap/dma.c13
-rw-r--r--arch/arm/plat-omap/dmtimer.c3
-rw-r--r--arch/arm/plat-omap/include/plat/board.h2
-rw-r--r--arch/arm/plat-omap/include/plat/common.h2
-rw-r--r--arch/arm/plat-omap/include/plat/dma.h1
-rw-r--r--arch/arm/plat-omap/include/plat/dmtimer.h4
-rw-r--r--arch/arm/plat-omap/ocpi.c109
-rw-r--r--arch/arm/plat-omap/omap_device.c2
-rw-r--r--arch/arm/plat-omap/sram.c4
-rw-r--r--arch/arm/plat-omap/usb.c4
12 files changed, 23 insertions, 125 deletions
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index c0fe2757b695..ed8605f01155 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,9 +9,6 @@ obj-m :=
obj-n :=
obj- :=
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f1e46ea6b81d..0a9b9a970113 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -20,6 +20,7 @@
#include <plat/board.h>
#include <plat/vram.h>
#include <plat/dsp.h>
+#include <plat/dma.h>
#include <plat/omap-secure.h>
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index ecdb3da0dea9..612227efe34f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -41,6 +41,15 @@
#include <plat/tc.h>
+/*
+ * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
+ * channels that an instance of the SDMA IP block can support. Used
+ * to size arrays. (The actual maximum on a particular SoC may be less
+ * than this -- for example, OMAP1 SDMA instances only support 17 logical
+ * DMA channels.)
+ */
+#define MAX_LOGICAL_DMA_CH_COUNT 32
+
#undef DEBUG
#ifndef CONFIG_ARCH_OMAP1
@@ -883,7 +892,7 @@ void omap_start_dma(int lch)
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
- char dma_chan_link_map[dma_lch_count];
+ char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
dma_chan_link_map[lch] = 1;
/* Set the link register of the first channel */
@@ -967,7 +976,7 @@ void omap_stop_dma(int lch)
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
- char dma_chan_link_map[dma_lch_count];
+ char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
do {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 652139c0339e..c4ed35e89fbd 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -349,11 +349,12 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
- struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
return -EINVAL;
+ pdata = timer->pdev->dev.platform_data;
if (!pdata->needs_manual_reset)
rate = clk_get_rate(timer->fclk);
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index d5eb4c87db9d..4814c5b65306 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -91,6 +91,8 @@ struct omap_usb_config {
u32 (*usb0_init)(unsigned nwires, unsigned is_device);
u32 (*usb1_init)(unsigned nwires);
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+ int (*ocpi_enable)(void);
};
struct omap_lcd_config {
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index b4d7ec3fbfbe..a557b8484e6c 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -32,6 +32,8 @@
extern int __init omap_init_clocksource_32k(void);
+extern void __init omap_check_revision(void);
+
extern void omap_reserve(void);
extern int omap_dss_reset(struct omap_hwmod *);
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index dc562a5c0a8a..42afb4c45517 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -442,6 +442,7 @@ struct omap_system_dma_plat_info {
u32 (*dma_read)(int reg, int lch);
};
+extern void __init omap_init_consistent_dma_size(void);
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 9418f00b6c38..230ff91be491 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -316,12 +316,12 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
OMAP_TIMER_V1_SYS_STAT_OFFSET;
timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->irq_dis = 0;
+ timer->irq_dis = NULL;
timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
timer->func_base = timer->io_base;
} else {
timer->revision = 2;
- timer->sys_stat = 0;
+ timer->sys_stat = NULL;
timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
deleted file mode 100644
index ebe0c73c8901..000000000000
--- a/arch/arm/plat-omap/ocpi.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/ocpi.c
- *
- * Minimal OCP bus support for omap16xx
- *
- * Copyright (C) 2003 - 2005 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define OCPI_BASE 0xfffec320
-#define OCPI_FAULT (OCPI_BASE + 0x00)
-#define OCPI_CMD_FAULT (OCPI_BASE + 0x04)
-#define OCPI_SINT0 (OCPI_BASE + 0x08)
-#define OCPI_TABORT (OCPI_BASE + 0x0c)
-#define OCPI_SINT1 (OCPI_BASE + 0x10)
-#define OCPI_PROT (OCPI_BASE + 0x14)
-#define OCPI_SEC (OCPI_BASE + 0x18)
-
-/* USB OHCI OCPI access error registers */
-#define HOSTUEADDR 0xfffba0e0
-#define HOSTUESTATUS 0xfffba0e4
-
-static struct clk *ocpi_ck;
-
-/*
- * Enables device access to OMAP buses via the OCPI bridge
- * FIXME: Add locking
- */
-int ocpi_enable(void)
-{
- unsigned int val;
-
- if (!cpu_is_omap16xx())
- return -ENODEV;
-
- /* Enable access for OHCI in OCPI */
- val = omap_readl(OCPI_PROT);
- val &= ~0xff;
- //val &= (1 << 0); /* Allow access only to EMIFS */
- omap_writel(val, OCPI_PROT);
-
- val = omap_readl(OCPI_SEC);
- val &= ~0xff;
- omap_writel(val, OCPI_SEC);
-
- return 0;
-}
-EXPORT_SYMBOL(ocpi_enable);
-
-static int __init omap_ocpi_init(void)
-{
- if (!cpu_is_omap16xx())
- return -ENODEV;
-
- ocpi_ck = clk_get(NULL, "l3_ocpi_ck");
- if (IS_ERR(ocpi_ck))
- return PTR_ERR(ocpi_ck);
-
- clk_enable(ocpi_ck);
- ocpi_enable();
- printk("OMAP OCPI interconnect driver loaded\n");
-
- return 0;
-}
-
-static void __exit omap_ocpi_exit(void)
-{
- /* REVISIT: Disable OCPI */
-
- if (!cpu_is_omap16xx())
- return;
-
- clk_disable(ocpi_ck);
- clk_put(ocpi_ck);
-}
-
-MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
-MODULE_DESCRIPTION("OMAP OCPI bus controller module");
-MODULE_LICENSE("GPL");
-module_init(omap_ocpi_init);
-module_exit(omap_ocpi_exit);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index d50cbc6385bd..c490240bb82c 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -475,13 +475,11 @@ static int omap_device_count_resources(struct omap_device *od)
static int omap_device_fill_resources(struct omap_device *od,
struct resource *res)
{
- int c = 0;
int i, r;
for (i = 0; i < od->hwmods_cnt; i++) {
r = omap_hwmod_fill_resources(od->hwmods[i], res);
res += r;
- c += r;
}
return 0;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index f9a8c5341ee9..477363c163ec 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -196,8 +196,8 @@ static void __init omap_map_sram(void)
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
- memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
+ memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+ omap_sram_size - SRAM_BOOTLOADER_SZ);
}
/*
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index d2bbfd1cb0b5..5db75619f213 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,8 +31,6 @@
#include <mach/hardware.h>
-#include "../mach-omap2/common.h"
-
#ifdef CONFIG_ARCH_OMAP_OTG
void __init
@@ -138,8 +136,6 @@ omap_otg_init(struct omap_usb_config *config)
#endif
pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
omap_writel(syscon, OTG_SYSCON_1);
-
- status = 0;
}
#else
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 06:37:59 +0000