diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx')
| -rw-r--r-- | arch/arm/mach-s3c64xx/Kconfig | 8 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/clock.c | 121 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/cpuidle.c | 91 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-smartq.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-smdk6410.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/setup-usb-phy.c | 90 |
8 files changed, 313 insertions, 10 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index dd20c66cd700..326ea3a98725 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -83,6 +83,11 @@ config S3C64XX_SETUP_SPI help Common setup code for SPI GPIO configurations +config S3C64XX_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + # S36400 Macchine support config MACH_SMDK6400 @@ -157,6 +162,7 @@ config MACH_SMDK6410 select S3C64XX_SETUP_IDE select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_USB_PHY help Machine support for the Samsung SMDK6410 @@ -256,6 +262,7 @@ config MACH_SMARTQ select S3C_DEV_USB_HOST select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_USB_PHY select SAMSUNG_DEV_ADC select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS @@ -283,6 +290,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD select S3C64XX_SETUP_SPI + select S3C64XX_SETUP_USB_PHY select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select S3C_DEV_USB_HOST diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 1822ac2eba31..f9ce1dc28ce4 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o # PM obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support @@ -42,6 +43,7 @@ obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o # Machine support diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index aebbcc291b4e..52f079a691cb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -207,6 +207,15 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, }, { + .name = "ac97", + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_AC97, + }, { + .name = "cfcon", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_IHOST, + }, { .name = "dma0", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, @@ -216,6 +225,107 @@ static struct clk init_clocks_off[] = { .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_DMA1, + }, { + .name = "3dse", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_3DSE, + }, { + .name = "hclk_secur", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SECUR, + }, { + .name = "sdma1", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SDMA1, + }, { + .name = "sdma0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SDMA0, + }, { + .name = "hclk_jpeg", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_JPEG, + }, { + .name = "camif", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_CAMIF, + }, { + .name = "hclk_scaler", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SCALER, + }, { + .name = "2d", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_2D, + }, { + .name = "tv", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_TV, + }, { + .name = "post0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_POST0, + }, { + .name = "rot", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_ROT, + }, { + .name = "hclk_mfc", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_MFC, + }, { + .name = "pclk_mfc", + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_MFC, + }, { + .name = "dac27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_DAC27, + }, { + .name = "tv27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_TV27, + }, { + .name = "scaler27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SCALER27, + }, { + .name = "sclk_scaler", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SCALER, + }, { + .name = "post0_27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_POST0_27, + }, { + .name = "secur", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SECUR, + }, { + .name = "sclk_mfc", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MFC, + }, { + .name = "cam", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_CAM, + }, { + .name = "sclk_jpeg", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_JPEG, }, }; @@ -289,16 +399,7 @@ static struct clk init_clocks[] = { .name = "watchdog", .parent = &clk_p, .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - } + }, }; static struct clk clk_hsmmc0 = { diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c new file mode 100644 index 000000000000..179460f38db7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -0,0 +1,91 @@ +/* linux/arch/arm/mach-s3c64xx/cpuidle.c + * + * Copyright (c) 2011 Wolfson Microelectronics, plc + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <linux/export.h> +#include <linux/time.h> + +#include <asm/proc-fns.h> + +#include <mach/map.h> + +#include <mach/regs-sys.h> +#include <mach/regs-syscon-power.h> + +static int s3c64xx_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct timeval before, after; + unsigned long tmp; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + /* Setup PWRCFG to enter idle mode */ + tmp = __raw_readl(S3C64XX_PWR_CFG); + tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; + tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE; + __raw_writel(tmp, S3C64XX_PWR_CFG); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + dev->last_residency = idle_time; + return index; +} + +static struct cpuidle_state s3c64xx_cpuidle_set[] = { + [0] = { + .enter = s3c64xx_enter_idle, + .exit_latency = 1, + .target_residency = 1, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "System active, ARM gated", + }, +}; + +static struct cpuidle_driver s3c64xx_cpuidle_driver = { + .name = "s3c64xx_cpuidle", + .owner = THIS_MODULE, + .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set), +}; + +static struct cpuidle_device s3c64xx_cpuidle_device = { + .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set), +}; + +static int __init s3c64xx_init_cpuidle(void) +{ + int ret; + + memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set, + sizeof(s3c64xx_cpuidle_set)); + cpuidle_register_driver(&s3c64xx_cpuidle_driver); + + ret = cpuidle_register_device(&s3c64xx_cpuidle_device); + if (ret) { + pr_err("Failed to register cpuidle device: %d\n", ret); + return ret; + } + + return 0; +} +device_initcall(s3c64xx_init_cpuidle); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 8077f650eb0e..3b56bd9cb880 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -59,6 +59,7 @@ #include <plat/sdhci.h> #include <plat/gpio-cfg.h> #include <plat/s3c64xx-spi.h> +#include <plat/udc-hs.h> #include <plat/keypad.h> #include <plat/clock.h> @@ -698,6 +699,8 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { .cfg_gpio = crag6410_cfg_sdhci0, }; +static struct s3c_hsotg_plat crag6410_hsotg_pdata; + static void __init crag6410_machine_init(void) { /* Open drain IRQs need pullups */ @@ -722,6 +725,7 @@ static void __init crag6410_machine_init(void) s3c_i2c0_set_platdata(&i2c0_pdata); s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); + s3c_hsotg_set_platdata(&crag6410_hsotg_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index ce31db136231..ce745e19aa27 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -187,6 +187,8 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { }, }; +static struct s3c_hsotg_plat smartq_hsotg_pdata; + static int __init smartq_lcd_setup_gpio(void) { int ret; @@ -383,6 +385,7 @@ void __init smartq_map_io(void) void __init smartq_machine_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_hsotg_set_platdata(&smartq_hsotg_pdata); s3c_hwmon_set_platdata(&smartq_hwmon_pdata); s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ca6fc204f0ea..d55bc96d9582 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -72,6 +72,7 @@ #include <plat/keypad.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include <plat/udc-hs.h> #include "common.h" @@ -631,6 +632,8 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = { .pwm_id = 1, }; +static struct s3c_hsotg_plat smdk6410_hsotg_pdata; + static void __init smdk6410_map_io(void) { u32 tmp; @@ -659,6 +662,7 @@ static void __init smdk6410_machine_init(void) s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata); samsung_keypad_set_platdata(&smdk6410_keypad_data); diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c new file mode 100644 index 000000000000..f6757e02d7db --- /dev/null +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <mach/map.h> +#include <mach/regs-sys.h> +#include <plat/cpu.h> +#include <plat/regs-usb-hsotg-phy.h> +#include <plat/usb-phy.h> + +static int s3c_usb_otgphy_init(struct platform_device *pdev) +{ + struct clk *xusbxti; + u32 phyclk; + + writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS); + + /* set clock frequency for PLL */ + phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; + + xusbxti = clk_get(&pdev->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48 * MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + + /* TODO: select external clock/oscillator */ + writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); + + /* set to normal OTG PHY */ + writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); + mdelay(1); + + /* reset OTG PHY and Link */ + writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, + S3C_RSTCON); + udelay(20); /* at-least 10uS */ + writel(0, S3C_RSTCON); + + return 0; +} + +static int s3c_usb_otgphy_exit(struct platform_device *pdev) +{ + writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | + S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); + + writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS); + + return 0; +} + +int s5p_usb_phy_init(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s3c_usb_otgphy_init(pdev); + + return -EINVAL; +} + +int s5p_usb_phy_exit(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s3c_usb_otgphy_exit(pdev); + + return -EINVAL; +} |