diff options
Diffstat (limited to 'arch/arm/mach-pxa/include/mach')
40 files changed, 658 insertions, 481 deletions
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index f82f96dd1053..16eb02552d5d 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -4,12 +4,22 @@ #include <sound/core.h> #include <sound/pcm.h> +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ typedef struct { int (*startup)(struct snd_pcm_substream *, void *); void (*shutdown)(struct snd_pcm_substream *, void *); void (*suspend)(void *); void (*resume)(void *); void *priv; + int reset_gpio; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 2ae373fb5675..a88d7caff0d1 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -1,19 +1,38 @@ #ifndef _COLIBRI_H_ #define _COLIBRI_H_ +#include <net/ax88796.h> + +/* + * common settings for all modules + */ + +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); +#else +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +extern void colibri_pxa3xx_init_lcd(int bl_pin); +#else +static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} +#endif + +#if defined(CONFIG_AX88796) +extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); +#endif + /* physical memory regions */ -#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ -/* virtual memory regions */ -#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ - -/* size of flash */ -#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ +/* definitions for Colibri PXA270 */ -/* Ethernet Controller Davicom DM9000 */ -#define GPIO_DM9000 114 -#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) +#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ +#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */ +#define COLIBRI_PXA270_ETH_IRQ_GPIO 114 +#define COLIBRI_PXA270_ETH_IRQ \ + gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO)) #endif /* _COLIBRI_H_ */ + diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h new file mode 100644 index 000000000000..747ab1a71f2f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -0,0 +1,26 @@ +/* + * Support for Cogent CSB726 + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef CSB726_H +#define CSB726_H + +#define CSB726_GPIO_IRQ_LAN 52 +#define CSB726_GPIO_IRQ_SM501 53 +#define CSB726_GPIO_MMC_DETECT 100 +#define CSB726_GPIO_MMC_RO 101 + +#define CSB726_FLASH_SIZE (64 * 1024 * 1024) +#define CSB726_FLASH_uMON (8 * 1024 * 1024) + +#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN) +#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501) + +#endif + diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h index 7804637a6df3..5bd55894a48d 100644 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ b/arch/arm/mach-pxa/include/mach/dma.h @@ -12,35 +12,10 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* - * Descriptor structure for PXA's DMA engine - * Note: this structure must always be aligned to a 16-byte boundary. - */ - -typedef struct pxa_dma_desc { - volatile u32 ddadr; /* Points to the next descriptor + flags */ - volatile u32 dsadr; /* DSADR value for the current transfer */ - volatile u32 dtadr; /* DTADR value for the current transfer */ - volatile u32 dcmd; /* DCMD value for the current transfer */ -} pxa_dma_desc; - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} pxa_dma_prio; - -/* - * DMA registration - */ - -int __init pxa_init_dma(int num_ch); - -int pxa_request_dma (char *name, - pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data); +#include <mach/hardware.h> -void pxa_free_dma (int dma_ch); +/* DMA Controller Registers Definitions */ +#define DMAC_REGS_VIRT io_p2v(0x40000000) +#include <plat/dma.h> #endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index efbd2aa9ecec..f3e5509820d7 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,21 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e740 audio control GPIOs */ +#define GPIO_E740_WM9705_nAVDD2 16 +#define GPIO_E740_MIC_ON 40 +#define GPIO_E740_AMP_ON 41 + +/* e750 audio control GPIOs */ +#define GPIO_E750_HP_AMP_OFF 4 +#define GPIO_E750_SPK_AMP_OFF 7 +#define GPIO_E750_HP_DETECT 37 + +/* e800 audio control GPIOs */ +#define GPIO_E800_HP_DETECT 81 +#define GPIO_E800_HP_AMP_OFF 82 +#define GPIO_E800_SPK_AMP_ON 83 + /* ASIC related GPIOs */ #define GPIO_ESERIES_TMIO_IRQ 5 #define GPIO_ESERIES_TMIO_PCLR 19 diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index 2c538d8c362d..b024a8b37439 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -24,42 +24,118 @@ #ifndef __ASM_ARCH_PXA_GPIO_H #define __ASM_ARCH_PXA_GPIO_H -#include <mach/pxa-regs.h> -#include <asm/irq.h> +#include <mach/irqs.h> #include <mach/hardware.h> - #include <asm-generic/gpio.h> +#define GPIO_REGS_VIRT io_p2v(0x40E00000) + +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) + +/* GPIO Pin Level Registers */ +#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) +#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) +#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) +#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) + +/* GPIO Pin Direction Registers */ +#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) +#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) +#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) +#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) + +/* GPIO Pin Output Set Registers */ +#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) +#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) +#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) +#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) + +/* GPIO Pin Output Clear Registers */ +#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) +#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) +#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) +#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) + +/* GPIO Rising Edge Detect Registers */ +#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) +#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) +#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) +#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) + +/* GPIO Falling Edge Detect Registers */ +#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) +#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) +#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) +#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) + +/* GPIO Edge Detect Status Registers */ +#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) +#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) +#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) +#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) + +/* GPIO Alternate Function Select Registers */ +#define GAFR0_L GPIO_REG(0x0054) +#define GAFR0_U GPIO_REG(0x0058) +#define GAFR1_L GPIO_REG(0x005C) +#define GAFR1_U GPIO_REG(0x0060) +#define GAFR2_L GPIO_REG(0x0064) +#define GAFR2_U GPIO_REG(0x0068) +#define GAFR3_L GPIO_REG(0x006C) +#define GAFR3_U GPIO_REG(0x0070) + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) +#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) +#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) +#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) +#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) + -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space. - */ #define NR_BUILTIN_GPIO 128 -static inline int gpio_get_value(unsigned gpio) +#define gpio_to_bank(gpio) ((gpio) >> 5) +#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +#ifdef CONFIG_CPU_PXA26x +/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(unsigned gpio) { - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); + return cpu_is_pxa25x() && gpio > 85; } +#else +static inline int __gpio_is_inverted(unsigned gpio) { return 0; } +#endif -static inline void gpio_set_value(unsigned gpio, int value) +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(unsigned gpio) { - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); + if (cpu_is_pxa27x() || cpu_is_pxa25x()) { + int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; + int dir = GPDR(gpio) & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + return af != 1 || dir == 0; else - GPCR(gpio) = GPIO_bit(gpio); - } else { - __gpio_set_value(gpio, value); - } + return af != 0 || dir != 0; + } else + return GPDR(gpio) & GPIO_bit(gpio); } -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) - - +#include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 099f54a41de4..06abd4160607 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -97,4 +97,5 @@ has detected a cable insertion; driven low otherwise. */ /* for expansion boards that can't be programatically detected */ extern int am200_init(void); +extern int am300_init(void); diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 4cb24154a5a8..751b74811d0f 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -25,7 +25,6 @@ /* FPGA register virtual addresses */ #define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) -#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) #define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) #define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) #define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 38d68d99f585..20ef37d4a9a7 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -27,7 +27,7 @@ #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 #define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30 #define GPIO37_MAGICIAN_KEY_HANGUP 37 #define GPIO38_MAGICIAN_KEY_CONTACTS 38 #define GPIO40_MAGICIAN_GSM_OUT2 40 @@ -69,7 +69,7 @@ #define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) #define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) -#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) +#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) /* * CPLD EGPIOs @@ -98,7 +98,7 @@ #define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index a72869b73ee3..b13dc0269a6d 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -1,7 +1,6 @@ #ifndef __ASM_ARCH_MFP_PXA25X_H #define __ASM_ARCH_MFP_PXA25X_H -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index da4f85a4f990..6543c05f47ed 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -8,7 +8,6 @@ * specific controller, and this should work in most cases. */ -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index 3e9211591e20..658b28ed129b 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H -#include <mach/mfp.h> +#include <plat/mfp.h> /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index bc1fb33a6e70..ae8441192ef0 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_MFP_PXA300_H #define __ASM_ARCH_MFP_PXA300_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ @@ -41,6 +40,7 @@ #endif /* Chip Select */ +#define GPIO1_nCS2 MFP_CFG(GPIO1, AF1) #define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) /* AC97 */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h index 67f8385ea548..07897e61d05a 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_MFP_PXA320_H #define __ASM_ARCH_MFP_PXA320_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ @@ -38,6 +37,7 @@ #define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) /* Chip Select */ +#define GPIO3_nCS2 MFP_CFG(GPIO3, AF1) #define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) /* AC97 */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h index 1f6b35c015d0..d375195d982b 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h @@ -1,68 +1,9 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - -/* MFPR register bit definitions */ -#define MFPR_PULL_SEL (0x1 << 15) -#define MFPR_PULLUP_EN (0x1 << 14) -#define MFPR_PULLDOWN_EN (0x1 << 13) -#define MFPR_SLEEP_SEL (0x1 << 9) -#define MFPR_SLEEP_OE_N (0x1 << 7) -#define MFPR_EDGE_CLEAR (0x1 << 6) -#define MFPR_EDGE_FALL_EN (0x1 << 5) -#define MFPR_EDGE_RISE_EN (0x1 << 4) - -#define MFPR_SLEEP_DATA(x) ((x) << 8) -#define MFPR_DRIVE(x) (((x) & 0x7) << 10) -#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) +#include <plat/mfp.h> -#define MFPR_EDGE_NONE (0) -#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) -#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) -#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) - -/* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) - * - * Input 0 X(0) X(0) X(0) 0 - * Drive 0 0 0 0 X(1) 0 - * Drive 1 0 1 X(1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFPR_LPM_INPUT (0) -#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) -#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) -#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) -#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) -#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) -#define MFPR_LPM_MASK (0xe080) - -/* - * The pullup and pulldown state of the MFP pin at run mode is by default - * determined by the selected alternate function. In case that some buggy - * devices need to override this default behavior, the definitions below - * indicates the setting of corresponding MFPR bits - * - * Definition pull_sel pullup_en pulldown_en - * MFPR_PULL_NONE 0 0 0 - * MFPR_PULL_LOW 1 0 1 - * MFPR_PULL_HIGH 1 1 0 - * MFPR_PULL_BOTH 1 1 1 - */ -#define MFPR_PULL_NONE (0) -#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) -#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) -#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) +#define MFPR_BASE (0x40e10000) /* PXA3xx common MFP configurations - processor specific ones defined * in mfp-pxa300.h and mfp-pxa320.h @@ -197,56 +138,21 @@ #define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) #define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code +/* NOTE: usage of these two functions is not recommended, + * use pxa3xx_mfp_config() instead. */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); +static inline unsigned long pxa3xx_mfp_read(int mfp) +{ + return mfp_read(mfp); +} + +static inline void pxa3xx_mfp_write(int mfp, unsigned long val) +{ + mfp_write(mfp, val); +} + +static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num) +{ + mfp_config(mfp_cfg, num); +} #endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h index fa73f56a1372..0d119d3b9221 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_MFP_PXA9xx_H #define __ASM_ARCH_MFP_PXA9xx_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index cfca8155be72..297387ec3618 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -15,8 +15,8 @@ #ifndef __ARCH_PXA_MTD_XIP_H__ #define __ARCH_PXA_MTD_XIP_H__ -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> +#include <mach/regs-intc.h> #define xip_irqpending() (ICIP & ICMR) diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h index 6c4b1f7de20a..58afb30d5298 100644 --- a/arch/arm/mach-pxa/include/mach/palmasoc.h +++ b/arch/arm/mach-pxa/include/mach/palmasoc.h @@ -1,13 +1,8 @@ #ifndef _INCLUDE_PALMASOC_H_ #define _INCLUDE_PALMASOC_H_ + struct palm27x_asoc_info { int jack_gpio; }; -#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data); -#else -static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {} -#endif - #endif diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h new file mode 100644 index 000000000000..fb13c82ad6dc --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -0,0 +1,110 @@ +/* + * GPIOs and interrupts for Palm LifeDrive Handheld Computer + * + * Authors: Alex Osborne <ato@meshy.org> + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMLD_H_ +#define _INCLUDE_PALMLD_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMLD_GPIO_RESET 1 +#define GPIO_NR_PALMLD_POWER_DETECT 4 +#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMLD_POWER_SWITCH 12 +#define GPIO_NR_PALMLD_EARPHONE_DETECT 13 +#define GPIO_NR_PALMLD_LOCK_SWITCH 15 + +/* SD/MMC */ +#define GPIO_NR_PALMLD_SD_DETECT_N 14 +#define GPIO_NR_PALMLD_SD_POWER 114 +#define GPIO_NR_PALMLD_SD_READONLY 116 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMLD_WM9712_IRQ 27 + +/* IRDA */ +#define GPIO_NR_PALMLD_IR_DISABLE 108 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMLD_BL_POWER 19 +#define GPIO_NR_PALMLD_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMLD_BORDER_SWITCH 21 +#define GPIO_NR_PALMLD_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMLD_BT_POWER 17 +#define GPIO_NR_PALMLD_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMLD_PCMCIA_READY 38 +#define GPIO_NR_PALMLD_PCMCIA_POWER 36 +#define GPIO_NR_PALMLD_PCMCIA_RESET 81 + +/* LEDs */ +#define GPIO_NR_PALMLD_LED_GREEN 52 +#define GPIO_NR_PALMLD_LED_AMBER 94 + +/* IDE */ +#define GPIO_NR_PALMLD_IDE_IRQ 95 +#define GPIO_NR_PALMLD_IDE_RESET 98 +#define GPIO_NR_PALMLD_IDE_PWEN 115 + +/* USB */ +#define GPIO_NR_PALMLD_USB_DETECT_N 3 +#define GPIO_NR_PALMLD_USB_READY 86 +#define GPIO_NR_PALMLD_USB_RESET 88 +#define GPIO_NR_PALMLD_USB_INT 106 +#define GPIO_NR_PALMLD_USB_POWER 118 +/* 20, 53 and 86 are usb related too */ + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) + + +/** HERE ARE INIT VALUES **/ + +/* IO mappings */ +#define PALMLD_USB_PHYS PXA_CS2_PHYS +#define PALMLD_USB_VIRT 0xf0000000 +#define PALMLD_USB_SIZE 0x00100000 + +#define PALMLD_IDE_PHYS 0x20000000 +#define PALMLD_IDE_VIRT 0xf1000000 +#define PALMLD_IDE_SIZE 0x00100000 + +#define PALMLD_PHYS_IO_START 0x40000000 +#define PALMLD_STR_BASE 0xa0200000 + +/* BATTERY */ +#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ +#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */ + +#define PALMLD_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMLD_MAX_INTENSITY 0xFE +#define PALMLD_DEFAULT_INTENSITY 0x7E +#define PALMLD_LIMIT_MASK 0x7F +#define PALMLD_PRESCALER 0x3F +#define PALMLD_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h new file mode 100644 index 000000000000..d15662aba008 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -0,0 +1,84 @@ +/* + * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer + * + * Authors: Ales Snuparek <snuparek@atlas.cz> + * Marek Vasut <marek.vasut@gmail.com> + * Justin Kendrick <twilightsentry@gmail.com> + * RichardT5 <richard_t5@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMT5_H_ +#define _INCLUDE_PALMT5_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMT5_GPIO_RESET 1 + +#define GPIO_NR_PALMT5_POWER_DETECT 90 +#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMT5_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMT5_SD_DETECT_N 14 +#define GPIO_NR_PALMT5_SD_POWER 114 +#define GPIO_NR_PALMT5_SD_READONLY 115 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMT5_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMT5_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMT5_USB_DETECT_N 15 +#define GPIO_NR_PALMT5_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMT5_BL_POWER 84 +#define GPIO_NR_PALMT5_LCD_POWER 96 + +/* BLUETOOTH */ +#define GPIO_NR_PALMT5_BT_POWER 17 +#define GPIO_NR_PALMT5_BT_RESET 83 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMT5_PHYS_RAM_START 0xa0000000 +#define PALMT5_PHYS_IO_START 0x40000000 +#define PALMT5_STR_BASE 0xa0200000 + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + +/* BATTERY */ +#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMT5_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMT5_MAX_INTENSITY 0xFE +#define PALMT5_DEFAULT_INTENSITY 0x7E +#define PALMT5_LIMIT_MASK 0x7F +#define PALMT5_PRESCALER 0x3F +#define PALMT5_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h new file mode 100644 index 000000000000..12361341f9d8 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -0,0 +1,68 @@ +/* + * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTE2_H_ +#define _INCLUDE_PALMTE2_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTE2_POWER_DETECT 9 +#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4 +#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15 + +/* SD/MMC */ +#define GPIO_NR_PALMTE2_SD_DETECT_N 10 +#define GPIO_NR_PALMTE2_SD_POWER 55 +#define GPIO_NR_PALMTE2_SD_READONLY 51 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTE2_IR_DISABLE 48 + +/* USB */ +#define GPIO_NR_PALMTE2_USB_DETECT_N 35 +#define GPIO_NR_PALMTE2_USB_PULLUP 53 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTE2_BL_POWER 56 +#define GPIO_NR_PALMTE2_LCD_POWER 37 + +/* KEYS */ +#define GPIO_NR_PALMTE2_KEY_NOTES 5 +#define GPIO_NR_PALMTE2_KEY_TASKS 7 +#define GPIO_NR_PALMTE2_KEY_CALENDAR 11 +#define GPIO_NR_PALMTE2_KEY_CONTACTS 13 +#define GPIO_NR_PALMTE2_KEY_CENTER 14 +#define GPIO_NR_PALMTE2_KEY_LEFT 19 +#define GPIO_NR_PALMTE2_KEY_RIGHT 20 +#define GPIO_NR_PALMTE2_KEY_DOWN 21 +#define GPIO_NR_PALMTE2_KEY_UP 22 + +/** HERE ARE INIT VALUES **/ + +/* BACKLIGHT */ +#define PALMTE2_MAX_INTENSITY 0xFE +#define PALMTE2_DEFAULT_INTENSITY 0x7E +#define PALMTE2_LIMIT_MASK 0x7F +#define PALMTE2_PRESCALER 0x3F +#define PALMTE2_PERIOD_NS 3500 + +/* BATTERY */ +#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1e8bccbda510..e74082c872e1 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -38,7 +38,6 @@ /* USB */ #define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 #define GPIO_NR_PALMTX_USB_PULLUP 93 /* LCD/BACKLIGHT */ @@ -78,6 +77,8 @@ #define PALMTX_PHYS_RAM_START 0xa0000000 #define PALMTX_PHYS_IO_START 0x40000000 +#define PALMTX_STR_BASE 0xa0200000 + #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index 83342469acac..a6eeef8a075f 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -27,3 +27,13 @@ extern void pxa27x_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); extern int pxa_pm_enter(suspend_state_t state); + +/* NOTE: this is for PM debugging on Lubbock, it's really a big + * ugly, but let's keep the crap minimum here, instead of direct + * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c + */ +#ifdef CONFIG_ARCH_LUBBOCK +extern void lubbock_set_hexled(uint32_t value); +#else +#define lubbock_set_hexled(x) +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h deleted file mode 100644 index 31d615aa7723..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/pxa-regs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA_REGS_H -#define __PXA_REGS_H - -#include <mach/hardware.h> - -/* - * PXA Chip selects - */ - -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 - - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - - -/* - * DMA Controller - */ -#define DCSR(x) __REG2(0x40000000, (x) << 2) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ -#endif - -#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ -#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ - -#define DRCMR(n) (*(((n) < 64) ? \ - &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ - &__REG2(0x40001100, ((n) & 0x3f) << 2))) - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ - -#define DDADR(x) __REG2(0x40000200, (x) << 4) -#define DSADR(x) __REG2(0x40000204, (x) << 4) -#define DTADR(x) __REG2(0x40000208, (x) << 4) -#define DCMD(x) __REG2(0x4000020c, (x) << 4) - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* - * Real Time Clock - */ - -#define RCNR __REG(0x40900000) /* RTC Count Register */ -#define RTAR __REG(0x40900004) /* RTC Alarm Register */ -#define RTSR __REG(0x40900008) /* RTC Status Register */ -#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ - -#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - - -/* - * OS Timer & Match Registers - */ - -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ - -#define OSSR_M3 (1 << 3) /* Match status channel 3 */ -#define OSSR_M2 (1 << 2) /* Match status channel 2 */ -#define OSSR_M1 (1 << 1) /* Match status channel 1 */ -#define OSSR_M0 (1 << 0) /* Match status channel 0 */ - -#define OWER_WME (1 << 0) /* Watchdog Match Enable */ - -#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ -#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ -#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ -#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* - * General Purpose I/O - */ - -#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ - -#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ - -#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ - -#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ - -#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ - -#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ - -#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ - -#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ - -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) - -#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h new file mode 100644 index 000000000000..508c3ba1f4d0 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA25x_H +#define __MACH_PXA25x_H + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> + +#endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h new file mode 100644 index 000000000000..6876e16c2970 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -0,0 +1,19 @@ +#ifndef __MACH_PXA27x_H +#define __MACH_PXA27x_H + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +#endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h index d83393e25273..1209c44aa6f1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h @@ -3,6 +3,8 @@ #warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h +#include <mach/gpio.h> + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index 77102d695cc7..4fcddd9cab76 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -14,6 +14,19 @@ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H +#include <mach/hardware.h> + +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + /* * Memory controller */ @@ -69,24 +82,6 @@ #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - -#ifdef CONFIG_PXA27x - -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - -#endif - - /* * Power Manager */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h index 2206cb61a9f9..b87cecd9bbdc 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h @@ -38,6 +38,7 @@ struct pxa2xx_spi_chip { u8 dma_burst_size; u32 timeout; u8 enable_loopback; + int gpio_cs; void (*cs_control)(u32 command); }; diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h new file mode 100644 index 000000000000..2f33076c9e48 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa300.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA300_H +#define __MACH_PXA300_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa300.h> + +#endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h new file mode 100644 index 000000000000..cab78e903273 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa320.h @@ -0,0 +1,9 @@ +#ifndef __MACH_PXA320_H +#define __MACH_PXA320_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa320.h> + +#endif /* __MACH_PXA320_H */ + diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index bcf3fb2c4b3a..7d1a059b3d43 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -13,6 +13,17 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H +#include <mach/hardware.h> + +/* + * Static Chip Selects + */ + +#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */ +#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */ +#define PXA3xx_CS2_PHYS (0x10000000) +#define PXA3xx_CS3_PHYS (0x14000000) + /* * Oscillator Configuration Register (OSCC) */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h index eb35fca9aea5..3478eae32d8a 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h @@ -49,6 +49,9 @@ struct pxa3xx_nand_platform_data { */ int enable_arbiter; + /* allow platform code to keep OBM/bootloader defined NFC config */ + int keep_config; + const struct mtd_partition *parts; unsigned int nr_parts; diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h new file mode 100644 index 000000000000..d45f76a9b54d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa930.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA930_H +#define __MACH_PXA930_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa930.h> + +#endif /* __MACH_PXA930_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h new file mode 100644 index 000000000000..ad23e74b762f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-intc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_INTC_H +#define __ASM_MACH_REGS_INTC_H + +#include <mach/hardware.h> + +/* + * Interrupt Controller + */ + +#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ +#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ +#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ +#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ +#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +#endif /* __ASM_MACH_REGS_INTC_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h new file mode 100644 index 000000000000..a3e5f86ef67e --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -0,0 +1,34 @@ +#ifndef __ASM_MACH_REGS_OST_H +#define __ASM_MACH_REGS_OST_H + +#include <mach/hardware.h> + +/* + * OS Timer & Match Registers + */ + +#define OSMR0 __REG(0x40A00000) /* */ +#define OSMR1 __REG(0x40A00004) /* */ +#define OSMR2 __REG(0x40A00008) /* */ +#define OSMR3 __REG(0x40A0000C) /* */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ +#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ +#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + +#endif /* __ASM_MACH_REGS_OST_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h new file mode 100644 index 000000000000..f0e4a589bbe1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_RTC_H +#define __ASM_MACH_REGS_RTC_H + +#include <mach/hardware.h> + +/* + * Real Time Clock + */ + +#define RCNR __REG(0x40900000) /* RTC Count Register */ +#define RTAR __REG(0x40900004) /* RTC Alarm Register */ +#define RTSR __REG(0x40900008) /* RTC Status Register */ +#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ + +#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + +#endif /* __ASM_MACH_REGS_RTC_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h index cf31986f6f05..6a2ed35acd59 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -37,7 +37,6 @@ #if defined(CONFIG_PXA25x) #define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ - #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ @@ -50,7 +49,7 @@ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif @@ -109,6 +108,11 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ +#if defined(CONFIG_PXA3xx) +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#endif + #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ #define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ #define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h index 0f381e692999..d1fce8b6d105 100644 --- a/arch/arm/mach-pxa/include/mach/system.h +++ b/arch/arm/mach-pxa/include/mach/system.h @@ -13,7 +13,6 @@ #include <asm/proc-fns.h> #include "hardware.h" #include "pxa2xx-regs.h" -#include "pxa-regs.h" static inline void arch_idle(void) { @@ -21,4 +20,4 @@ static inline void arch_idle(void) } -void arch_reset(char mode); +void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index f4b029c03957..5706cea95d11 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -35,7 +35,8 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { - if (machine_is_littleton() || machine_is_intelmote2()) + if (machine_is_littleton() || machine_is_intelmote2() + || machine_is_csb726()) UART = STUART; } |