summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/clock34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/clock34xx.c')
-rw-r--r--arch/arm/mach-omap2/clock34xx.c489
1 files changed, 0 insertions, 489 deletions
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 6dc46dc1ea3a..ded32364f32b 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -43,12 +43,6 @@
#include "cm.h"
#include "cm-regbits-34xx.h"
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
-
-#define MAX_DPLL_WAIT_TRIES 1000000
-
#define CYCLES_PER_MHZ 1000000
/*
@@ -149,376 +143,11 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
.find_companion = omap2_clk_dflt_find_companion,
};
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
- return omap2_get_dpll_rate(clk);
-}
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-{
- const struct dpll_data *dd;
- u32 v;
-
- dd = clk->dpll_data;
-
- v = __raw_readl(dd->control_reg);
- v &= ~dd->enable_mask;
- v |= clken_bits << __ffs(dd->enable_mask);
- __raw_writel(v, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-{
- const struct dpll_data *dd;
- int i = 0;
- int ret = -EINVAL;
-
- dd = clk->dpll_data;
-
- state <<= __ffs(dd->idlest_mask);
-
- while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
- i < MAX_DPLL_WAIT_TRIES) {
- i++;
- udelay(1);
- }
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- printk(KERN_ERR "clock: %s failed transition to '%s'\n",
- clk->name, (state) ? "locked" : "bypassed");
- } else {
- pr_debug("clock: %s transition to '%s' in %d loops\n",
- clk->name, (state) ? "locked" : "bypassed", i);
-
- ret = 0;
- }
-
- return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-{
- unsigned long fint;
- u16 f = 0;
-
- fint = clk->dpll_data->clk_ref->rate / n;
-
- pr_debug("clock: fint is %lu\n", fint);
-
- if (fint >= 750000 && fint <= 1000000)
- f = 0x3;
- else if (fint > 1000000 && fint <= 1250000)
- f = 0x4;
- else if (fint > 1250000 && fint <= 1500000)
- f = 0x5;
- else if (fint > 1500000 && fint <= 1750000)
- f = 0x6;
- else if (fint > 1750000 && fint <= 2100000)
- f = 0x7;
- else if (fint > 7500000 && fint <= 10000000)
- f = 0xB;
- else if (fint > 10000000 && fint <= 12500000)
- f = 0xC;
- else if (fint > 12500000 && fint <= 15000000)
- f = 0xD;
- else if (fint > 15000000 && fint <= 17500000)
- f = 0xE;
- else if (fint > 17500000 && fint <= 21000000)
- f = 0xF;
- else
- pr_debug("clock: unknown freqsel setting for %d\n", n);
-
- return f;
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
- * readiness before returning. Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code. If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-{
- u8 ai;
- int r;
-
- pr_debug("clock: locking DPLL %s\n", clk->name);
-
- ai = omap3_dpll_autoidle_read(clk);
-
- omap3_dpll_deny_idle(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
- r = _omap3_wait_dpll_status(clk, 1);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode. In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate. Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code. If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-{
- int r;
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
- return -EINVAL;
-
- pr_debug("clock: configuring DPLL %s for low-power bypass\n",
- clk->name);
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
- r = _omap3_wait_dpll_status(clk, 0);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
- else
- omap3_dpll_deny_idle(clk);
-
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code. If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-{
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
- return -EINVAL;
-
- pr_debug("clock: stopping DPLL %s\n", clk->name);
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
- else
- omap3_dpll_deny_idle(clk);
-
- return 0;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock. This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state. Intended to be used as the struct clk's
- * enable function. If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-static int omap3_noncore_dpll_enable(struct clk *clk)
-{
- int r;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (clk->rate == dd->clk_bypass->rate) {
- WARN_ON(clk->parent != dd->clk_bypass);
- r = _omap3_noncore_dpll_bypass(clk);
- } else {
- WARN_ON(clk->parent != dd->clk_ref);
- r = _omap3_noncore_dpll_lock(clk);
- }
- /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
- if (!r)
- clk->rate = omap2_get_dpll_rate(clk);
-
- return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. This function is
- * intended for use in struct clkops. No return value.
- */
-static void omap3_noncore_dpll_disable(struct clk *clk)
-{
- _omap3_noncore_dpll_stop(clk);
-}
-
const struct clkops clkops_noncore_dpll_ops = {
.enable = omap3_noncore_dpll_enable,
.disable = omap3_noncore_dpll_disable,
};
-/* Non-CORE DPLL rate set code */
-
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock.. Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
- struct dpll_data *dd = clk->dpll_data;
- u32 v;
-
- /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
- _omap3_noncore_dpll_bypass(clk);
-
- /* Set jitter correction */
- v = __raw_readl(dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- __raw_writel(v, dd->control_reg);
-
- /* Set DPLL multiplier, divider */
- v = __raw_readl(dd->mult_div1_reg);
- v &= ~(dd->mult_mask | dd->div1_mask);
- v |= m << __ffs(dd->mult_mask);
- v |= (n - 1) << __ffs(dd->div1_mask);
- __raw_writel(v, dd->mult_div1_reg);
-
- /* We let the clock framework set the other output dividers later */
-
- /* REVISIT: Set ramp-up delay? */
-
- _omap3_noncore_dpll_lock(clk);
-
- return 0;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Set the DPLL CLKOUT to the target rate. If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass. Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL. Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *new_parent = NULL;
- u16 freqsel;
- struct dpll_data *dd;
- int ret;
-
- if (!clk || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (rate == omap2_get_dpll_rate(clk))
- return 0;
-
- /*
- * Ensure both the bypass and ref clocks are enabled prior to
- * doing anything; we need the bypass clock running to reprogram
- * the DPLL.
- */
- omap2_clk_enable(dd->clk_bypass);
- omap2_clk_enable(dd->clk_ref);
-
- if (dd->clk_bypass->rate == rate &&
- (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
- ret = _omap3_noncore_dpll_bypass(clk);
- if (!ret)
- new_parent = dd->clk_bypass;
- } else {
- if (dd->last_rounded_rate != rate)
- omap2_dpll_round_rate(clk, rate);
-
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
-
- freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
- if (!freqsel)
- WARN_ON(1);
-
- pr_debug("clock: %s: set rate: locking rate to %lu.\n",
- clk->name, rate);
-
- ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
- dd->last_rounded_n, freqsel);
- if (!ret)
- new_parent = dd->clk_ref;
- }
- if (!ret) {
- /*
- * Switch the parent clock in the heirarchy, and make sure
- * that the new parent's usecount is correct. Note: we
- * enable the new parent before disabling the old to avoid
- * any unnecessary hardware disable->enable transitions.
- */
- if (clk->usecount) {
- omap2_clk_enable(new_parent);
- omap2_clk_disable(clk->parent);
- }
- clk_reparent(clk, new_parent);
- clk->rate = rate;
- }
- omap2_clk_disable(dd->clk_ref);
- omap2_clk_disable(dd->clk_bypass);
-
- return 0;
-}
-
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
{
/*
@@ -622,124 +251,6 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
return 0;
}
-
-/* DPLL autoidle read/set code */
-
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- v = __raw_readl(dd->autoidle_reg);
- v &= dd->autoidle_mask;
- v >>= __ffs(dd->autoidle_mask);
-
- return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control. This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430. The DPLL will enter low-power stop when its downstream
- * clocks are gated. No return value.
- */
-void omap3_dpll_allow_idle(struct clk *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- /*
- * REVISIT: CORE DPLL can optionally enter low-power bypass
- * by writing 0x5 instead of 0x1. Add some mechanism to
- * optionally enter this mode.
- */
- v = __raw_readl(dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
- __raw_writel(v, dd->autoidle_reg);
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control. No return value.
- */
-void omap3_dpll_deny_idle(struct clk *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- v = __raw_readl(dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
- __raw_writel(v, dd->autoidle_reg);
-}
-
-/* Clock control for DPLL outputs */
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state. If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
- struct clk *pclk;
-
- /* Walk up the parents of clk, looking for a DPLL */
- pclk = clk->parent;
- while (pclk && !pclk->dpll_data)
- pclk = pclk->parent;
-
- /* clk does not have a DPLL as a parent? */
- WARN_ON(!pclk);
-
- dd = pclk->dpll_data;
-
- WARN_ON(!dd->enable_mask);
-
- v = __raw_readl(dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
- if (v != OMAP3XXX_EN_DPLL_LOCKED)
- rate = clk->parent->rate;
- else
- rate = clk->parent->rate * 2;
- return rate;
-}
-
/* Common clock code */
/*
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 02:42:01 +0000