diff options
Diffstat (limited to 'arch/arm/mach-at91/pm_suspend.S')
| -rw-r--r-- | arch/arm/mach-at91/pm_suspend.S | 32 |
1 files changed, 20 insertions, 12 deletions
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index ed57c879d4e1..52b262d56cfd 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -93,6 +93,8 @@ ENTRY(at91_pm_suspend_in_sram) str tmp1, .memtype ldr tmp1, [r0, #PM_DATA_MODE] str tmp1, .pm_mode + ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] + str tmp1, .mckr_offset /* Both ldrne below are here to preload their address in the TLB */ ldr tmp1, [r0, #PM_DATA_SHDWC] str tmp1, .shdwc @@ -138,9 +140,10 @@ ENDPROC(at91_pm_suspend_in_sram) ENTRY(at91_backup_mode) /* Switch the master clock source to slow clock. */ ldr pmc, .pmc_base - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp2, .mckr_offset + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -218,6 +221,7 @@ ENDPROC(at91_backup_mode) */ .macro at91_pm_ulp1_mode ldr pmc, .pmc_base + ldr tmp2, .mckr_offset /* Save RC oscillator state and check if it is enabled. */ ldr tmp1, [pmc, #AT91_PMC_SR] @@ -254,10 +258,10 @@ ENDPROC(at91_backup_mode) str tmp1, [pmc, #AT91_CKGR_MOR] /* Switch the master clock source to main clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -280,9 +284,9 @@ ENDPROC(at91_backup_mode) wait_moscrdy /* Switch the master clock source to slow clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -296,10 +300,10 @@ ENDPROC(at91_backup_mode) wait_moscsels /* Switch the master clock source to main clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -325,16 +329,17 @@ ENDPROC(at91_backup_mode) ENTRY(at91_ulp_mode) ldr pmc, .pmc_base + ldr tmp2, .mckr_offset /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] str tmp1, .saved_mckr /* * Set the Master clock source to slow clock */ bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -355,8 +360,9 @@ ulp_exit: /* * Restore master clock setting */ - ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, .mckr_offset + ldr tmp2, .saved_mckr + str tmp2, [pmc, tmp1] wait_mckrdy @@ -502,6 +508,8 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .pm_mode: .word 0 +.mckr_offset: + .word 0 .saved_mckr: .word 0 .saved_sam9_lpr: |