diff options
Diffstat (limited to 'arch/arm/boot/dts/lpc32xx.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/lpc32xx.dtsi | 150 |
1 files changed, 117 insertions, 33 deletions
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index c85cf979725e..c58d8da9ea2a 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -13,6 +13,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/lpc32xx-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -28,6 +31,22 @@ }; }; + clocks { + xtal_32k: xtal_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k"; + }; + + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "xtal"; + }; + }; + ahb { #address-cells = <1>; #size-cells = <1>; @@ -41,20 +60,24 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; + clocks = <&clk LPC32XX_CLK_SLC>; status = "disabled"; }; mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; reg = <0x200a8000 0x11000>; - interrupts = <11 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MLC>; status = "disabled"; }; dma: dma@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; - interrupts = <0x1c 0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_DMA>; + clock-names = "apb_pclk"; }; usb { @@ -69,43 +92,60 @@ ohci: ohci@0 { compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x0 0x300>; - interrupts = <0x3b 0>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; status = "disabled"; }; usbd: usbd@0 { compatible = "nxp,lpc3220-udc"; reg = <0x0 0x300>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>, + <62 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <58 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; status = "disabled"; }; i2cusb: i2c@300 { compatible = "nxp,pnx-i2c"; reg = <0x300 0x100>; - interrupts = <0x3f 0>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; }; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; }; clcd: clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; - interrupts = <0x0e 0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_LCD>; + clock-names = "apb_pclk"; status = "disabled"; }; mac: ethernet@31060000 { compatible = "nxp,lpc-eth"; reg = <0x31060000 0x1000>; - interrupts = <0x1d 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MAC>; }; emc: memory-controller@31080000 { compatible = "arm,pl175", "arm,primecell"; reg = <0x31080000 0x1000>; + clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>; + clock-names = "mpmcclk", "apb_pclk"; #address-cells = <1>; #size-cells = <1>; @@ -125,7 +165,9 @@ ssp0: ssp@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; - interrupts = <0x14 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP0>; + clock-names = "apb_pclk"; }; spi1: spi@20088000 { @@ -136,7 +178,9 @@ ssp1: ssp@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; - interrupts = <0x15 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP1>; + clock-names = "apb_pclk"; }; spi2: spi@20090000 { @@ -152,7 +196,10 @@ sd: sd@20098000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; - interrupts = <0x0f 0>, <0x0d 0>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SD>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -166,55 +213,57 @@ /* actually, ns16550a w/ 64 byte fifos! */ compatible = "nxp,lpc3220-uart"; reg = <0x40090000 0x1000>; - interrupts = <9 0>; - clock-frequency = <13000000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART5>; status = "disabled"; }; uart3: serial@40080000 { compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; - interrupts = <7 0>; - clock-frequency = <13000000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART3>; status = "disabled"; }; uart4: serial@40088000 { compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - interrupts = <8 0>; - clock-frequency = <13000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART4>; status = "disabled"; }; uart6: serial@40098000 { compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; - interrupts = <10 0>; - clock-frequency = <13000000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART6>; status = "disabled"; }; i2c1: i2c@400A0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; - interrupts = <0x33 0>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C1>; }; i2c2: i2c@400A8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; - interrupts = <0x32 0>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C2>; }; mpwm: mpwm@400E8000 { @@ -231,6 +280,23 @@ compatible = "simple-bus"; ranges = <0x20000000 0x20000000 0x30000000>; + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; + /* * MIC Interrupt controller includes: * MIC @40008000 @@ -247,28 +313,29 @@ uart1: serial@40014000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart2: serial@40018000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart7: serial@4001c000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x4001c000 0x1000>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; - interrupts = <0x34 0>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_RTC>; }; gpio: gpio@40028000 { @@ -281,26 +348,33 @@ timer4: timer@4002C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; - interrupts = <0x3 0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER4>; + clock-names = "timerclk"; status = "disabled"; }; timer5: timer@40030000 { compatible = "nxp,lpc3220-timer"; reg = <0x40030000 0x1000>; - interrupts = <0x4 0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER5>; + clock-names = "timerclk"; status = "disabled"; }; watchdog: watchdog@4003C000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; + clocks = <&clk LPC32XX_CLK_WDOG>; }; timer0: timer@40044000 { compatible = "nxp,lpc3220-timer"; reg = <0x40044000 0x1000>; - interrupts = <0x10 0>; + clocks = <&clk LPC32XX_CLK_TIMER0>; + clock-names = "timerclk"; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; }; /* @@ -313,53 +387,63 @@ adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; timer1: timer@4004C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; - interrupts = <0x11 0>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; }; key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 0>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; timer2: timer@40058000 { compatible = "nxp,lpc3220-timer"; reg = <0x40058000 0x1000>; - interrupts = <0x12 0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER2>; + clock-names = "timerclk"; status = "disabled"; }; pwm1: pwm@4005C000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; status = "disabled"; }; pwm2: pwm@4005C004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; status = "disabled"; }; timer3: timer@40060000 { compatible = "nxp,lpc3220-timer"; reg = <0x40060000 0x1000>; - interrupts = <0x13 0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER3>; + clock-names = "timerclk"; status = "disabled"; }; }; |