summaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig.debug
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/Kconfig.debug')
-rw-r--r--arch/arm/Kconfig.debug108
1 files changed, 22 insertions, 86 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 970de7518341..0c12ffb155a2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -93,6 +93,14 @@ choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
+ config DEBUG_ALPINE_UART0
+ bool "Kernel low-level debugging messages via Alpine UART0"
+ depends on ARCH_ALPINE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Alpine based platforms.
+
config DEBUG_ASM9260_UART
bool "Kernel low-level debugging via asm9260 UART"
depends on MACH_ASM9260
@@ -448,25 +456,6 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
- config DEBUG_MSM_UART
- bool "Kernel low-level debugging messages via MSM UART"
- depends on ARCH_MSM
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM devices.
-
- ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT #
- MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
- MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
- MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
-
- MSM7X30 0xaca00000 0xe1000000 UART1
- MSM7X30 0xacb00000 0xe1000000 UART2
- MSM7X30 0xacc00000 0xe1000000 UART3
-
- Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
- options based on your needs.
-
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
@@ -806,7 +795,7 @@ choice
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
- bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
+ bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
@@ -821,12 +810,11 @@ choice
via SCIF2 on Renesas R-Car E2 (R8A7794).
config DEBUG_RMOBILE_SCIFA0
- bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
- depends on ARCH_R8A73A4 || ARCH_SH7372
+ bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
+ depends on ARCH_R8A73A4
help
Say Y here if you want kernel low-level debugging support
- via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
- AP4 (SH7372).
+ via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
config DEBUG_RMOBILE_SCIFA1
bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
@@ -1295,7 +1283,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
- default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+ default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
@@ -1388,7 +1376,6 @@ config DEBUG_UART_PHYS
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
- default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
@@ -1417,6 +1404,7 @@ config DEBUG_UART_PHYS
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
default 0xfcb00000 if DEBUG_HI3620_UART
+ default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1433,7 +1421,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_NETX_UART || \
+ DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
@@ -1446,7 +1434,6 @@ config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
- default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1483,6 +1470,7 @@ config DEBUG_UART_VIRT
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
default 0xfd012000 if ARCH_MV78XX0
+ default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfde12000 if ARCH_DOVE
default 0xfe012000 if ARCH_ORION5X
default 0xf31004c0 if DEBUG_MESON_UARTAO
@@ -1526,7 +1514,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_NETX_UART || \
+ DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
@@ -1543,7 +1531,7 @@ config DEBUG_UART_8250_WORD
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
depends on DEBUG_UART_8250_SHIFT >= 2
default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
- ARCH_KEYSTONE || \
+ ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
@@ -1556,7 +1544,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
- depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
+ depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
@@ -1573,7 +1561,8 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARCH_EFM32
+ PLAT_SAMSUNG || ARCH_EFM32 || \
+ ARCH_SHMOBILE_LEGACY
default "mach/uncompress.h"
config EARLY_PRINTK
@@ -1610,59 +1599,6 @@ config DEBUG_SET_MODULE_RONX
against certain classes of kernel exploits.
If in doubt, say "N".
-menuconfig CORESIGHT
- bool "CoreSight Tracing Support"
- select ARM_AMBA
- help
- This framework provides a kernel interface for the CoreSight debug
- and trace drivers to register themselves with. It's intended to build
- a topological view of the CoreSight components based on a DT
- specification and configure the right serie of components when a
- trace source gets enabled.
-
-if CORESIGHT
-config CORESIGHT_LINKS_AND_SINKS
- bool "CoreSight Link and Sink drivers"
- help
- This enables support for CoreSight link and sink drivers that are
- responsible for transporting and collecting the trace data
- respectively. Link and sinks are dynamically aggregated with a trace
- entity at run time to form a complete trace path.
-
-config CORESIGHT_LINK_AND_SINK_TMC
- bool "Coresight generic TMC driver"
- depends on CORESIGHT_LINKS_AND_SINKS
- help
- This enables support for the Trace Memory Controller driver. Depending
- on its configuration the device can act as a link (embedded trace router
- - ETR) or sink (embedded trace FIFO). The driver complies with the
- generic implementation of the component without special enhancement or
- added features.
-
-config CORESIGHT_SINK_TPIU
- bool "Coresight generic TPIU driver"
- depends on CORESIGHT_LINKS_AND_SINKS
- help
- This enables support for the Trace Port Interface Unit driver, responsible
- for bridging the gap between the on-chip coresight components and a trace
- port collection engine, typically connected to an external host for use
- case capturing more traces than the on-board coresight memory can handle.
-
-config CORESIGHT_SINK_ETBV10
- bool "Coresight ETBv1.0 driver"
- depends on CORESIGHT_LINKS_AND_SINKS
- help
- This enables support for the Embedded Trace Buffer version 1.0 driver
- that complies with the generic implementation of the component without
- special enhancement or added features.
+source "drivers/hwtracing/coresight/Kconfig"
-config CORESIGHT_SOURCE_ETM3X
- bool "CoreSight Embedded Trace Macrocell 3.x driver"
- select CORESIGHT_LINKS_AND_SINKS
- help
- This driver provides support for processor ETM3.x and PTM1.x modules,
- which allows tracing the instructions that a processor is executing
- This is primarily useful for instruction level tracing. Depending
- the ETM version data tracing may also be available.
-endif
endmenu