diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/obsolete/sysfs-bus-iio | 182 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 82 |
2 files changed, 182 insertions, 82 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio new file mode 100644 index 000000000000..c9531bb64816 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-bus-iio @@ -0,0 +1,182 @@ +What: /sys/bus/iio/devices/iio:deviceX/buffer/length +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Number of scans contained by the buffer. + + Since Kernel 5.11, multiple buffers are supported. + so, it is better to use, instead: + /sys/bus/iio/devices/iio:deviceX/bufferY/length + +What: /sys/bus/iio/devices/iio:deviceX/buffer/enable +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Actually start the buffer capture up. Will start trigger + if first device and appropriate. + + Since Kernel 5.11, multiple buffers are supported. + so, it is better to use, instead: + /sys/bus/iio/devices/iio:deviceX/bufferY/enable + +What: /sys/bus/iio/devices/iio:deviceX/scan_elements +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Directory containing interfaces for elements that will be + captured for a single triggered sample set in the buffer. + + Since kernel 5.11 the scan_elements attributes are merged into + the bufferY directory, to be configurable per buffer. + +What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en +What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en +What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en +What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en +What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en +What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en +What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en +What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en +What: /sys/.../iio:deviceX/scan_elements/in_pressure_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en +What: /sys/.../iio:deviceX/scan_elements/in_proximity_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Scan element control for triggered data capture. + + Since kernel 5.11 the scan_elements attributes are merged into + the bufferY directory, to be configurable per buffer. + +What: /sys/.../iio:deviceX/scan_elements/in_accel_type +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type +What: /sys/.../iio:deviceX/scan_elements/in_magn_type +What: /sys/.../iio:deviceX/scan_elements/in_incli_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type +What: /sys/.../iio:deviceX/scan_elements/in_voltage_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type +What: /sys/.../iio:deviceX/scan_elements/in_pressure_type +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type +What: /sys/.../iio:deviceX/scan_elements/in_proximity_type +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Description of the scan element data storage within the buffer + and hence the form in which it is read from user-space. + Form is [be|le]:[s|u]bits/storagebits[>>shift]. + be or le specifies big or little endian. s or u specifies if + signed (2's complement) or unsigned. bits is the number of bits + of data and storagebits is the space (after padding) that it + occupies in the buffer. shift if specified, is the shift that + needs to be applied prior to masking out unused bits. Some + devices put their data in the middle of the transferred elements + with additional information on both sides. Note that some + devices will have additional information in the unused bits + so to get a clean value, the bits value must be used to mask + the buffer output value appropriately. The storagebits value + also specifies the data alignment. So s48/64>>2 will be a + signed 48 bit integer stored in a 64 bit location aligned to + a 64 bit boundary. To obtain the clean value, shift right 2 + and apply a mask to zero the top 16 bits of the result. + For other storage combinations this attribute will be extended + appropriately. + + Since kernel 5.11 the scan_elements attributes are merged into + the bufferY directory, to be configurable per buffer. + +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index +What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index +What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index +What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index +What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index +What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index +What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index +What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index +What: /sys/.../iio:deviceX/scan_elements/in_pressure_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index +What: /sys/.../iio:deviceX/scan_elements/in_proximity_index +KernelVersion: 2.6.37 +Description: + A single positive integer specifying the position of this + scan element in the buffer. Note these are not dependent on + what is enabled and may not be contiguous. Thus for user-space + to establish the full layout these must be used in conjunction + with all _en attributes to establish which channels are present, + and the relevant _type attributes to establish the data storage + format. + + Since kernel 5.11 the scan_elements attributes are merged into + the bufferY directory, to be configurable per buffer. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + A single positive integer specifying the maximum number of scan + elements to wait for. + + Poll will block until the watermark is reached. + + Blocking read will wait until the minimum between the requested + read amount or the low water mark is available. + + Non-blocking read will retrieve the available samples from the + buffer even if there are less samples then watermark level. This + allows the application to block on poll with a timeout and read + the available samples after the timeout expires and thus have a + maximum delay guarantee. + + Since Kernel 5.11, multiple buffers are supported. + so, it is better to use, instead: + /sys/bus/iio/devices/iio:deviceX/bufferY/watermark + +What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available +KernelVersion: 4.16 +Contact: linux-iio@vger.kernel.org +Description: + A read-only value indicating the bytes of data available in the + buffer. In the case of an output buffer, this indicates the + amount of empty space available to write data to. In the case of + an input buffer, this indicates the amount of data available for + reading. + + Since Kernel 5.11, multiple buffers are supported. + so, it is better to use, instead: + /sys/bus/iio/devices/iio:deviceX/bufferY/data_available diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 587300b388a8..29c1097c5722 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1238,16 +1238,12 @@ Description: The name of the trigger source being used, as per string given in /sys/class/iio/triggerY/name. -What: /sys/bus/iio/devices/iio:deviceX/buffer/length -KernelVersion: 2.6.35 What: /sys/bus/iio/devices/iio:deviceX/bufferY/length KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Number of scans contained by the buffer. -What: /sys/bus/iio/devices/iio:deviceX/buffer/enable -KernelVersion: 2.6.35 What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org @@ -1255,8 +1251,6 @@ Description: Actually start the buffer capture up. Will start trigger if first device and appropriate. -What: /sys/bus/iio/devices/iio:deviceX/scan_elements -KernelVersion: 2.6.37 What: /sys/bus/iio/devices/iio:deviceX/bufferY KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org @@ -1267,34 +1261,6 @@ Description: Since kernel 5.11 the scan_elements attributes are merged into the bufferY directory, to be configurable per buffer. -What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en -What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en -What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en -What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en -What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en -What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en -What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en -What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en -What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en -What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en -What: /sys/.../iio:deviceX/scan_elements/in_pressure_en -What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en -What: /sys/.../iio:deviceX/scan_elements/in_proximity_en -KernelVersion: 2.6.37 What: /sys/.../iio:deviceX/bufferY/in_accel_x_en What: /sys/.../iio:deviceX/bufferY/in_accel_y_en What: /sys/.../iio:deviceX/bufferY/in_accel_z_en @@ -1327,23 +1293,6 @@ Contact: linux-iio@vger.kernel.org Description: Scan element control for triggered data capture. -What: /sys/.../iio:deviceX/scan_elements/in_accel_type -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type -What: /sys/.../iio:deviceX/scan_elements/in_magn_type -What: /sys/.../iio:deviceX/scan_elements/in_incli_type -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type -What: /sys/.../iio:deviceX/scan_elements/in_voltage_type -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type -What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type -What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type -What: /sys/.../iio:deviceX/scan_elements/in_pressure_type -What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type -What: /sys/.../iio:deviceX/scan_elements/in_proximity_type -KernelVersion: 2.6.37 What: /sys/.../iio:deviceX/bufferY/in_accel_type What: /sys/.../iio:deviceX/bufferY/in_anglvel_type What: /sys/.../iio:deviceX/bufferY/in_magn_type @@ -1390,33 +1339,6 @@ Description: If the type parameter can take one of a small set of values, this attribute lists them. -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index -What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index -What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index -What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index -What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index -What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index -What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index -What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index -What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index -What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index -What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index -What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index -What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index -What: /sys/.../iio:deviceX/scan_elements/in_pressure_index -What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index -What: /sys/.../iio:deviceX/scan_elements/in_proximity_index -KernelVersion: 2.6.37 What: /sys/.../iio:deviceX/bufferY/in_voltageY_index What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_index @@ -1656,8 +1578,6 @@ Description: Specifies number of seconds in which we compute the steps that occur in order to decide if the consumer is making steps. -What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark -KernelVersion: 4.2 What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org @@ -1676,8 +1596,6 @@ Description: the available samples after the timeout expires and thus have a maximum delay guarantee. -What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available -KernelVersion: 4.16 What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org |