diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt (renamed from Documentation/devicetree/bindings/usb/mt8173-xhci.txt) | 14 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/mt8173-mtu3.txt | 2 |
2 files changed, 12 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 0acfc8acbea1..5611a2e4ddf0 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -11,7 +11,11 @@ into two parts. ------------------------------------------------------------------------ Required properties: - - compatible : should contain "mediatek,mt8173-xhci" + - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", + soc-model is the name of SoC, such as mt8173, mt2712 etc, when using + "mediatek,mtk-xhci" compatible string, you need SoC specific ones in + addition, one of: + - "mediatek,mt8173-xhci" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - interrupts : interrupt used by the controller @@ -68,10 +72,14 @@ usb30: usb@11270000 { In the case, xhci is added as subnode to mtu3. An example and the DT binding details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +Documentation/devicetree/bindings/usb/mediatek,mtu3.txt Required properties: - - compatible : should contain "mediatek,mt8173-xhci" + - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", + soc-model is the name of SoC, such as mt8173, mt2712 etc, when using + "mediatek,mtk-xhci" compatible string, you need SoC specific ones in + addition, one of: + - "mediatek,mt8173-xhci" - reg : specifies physical base address and size of the registers - reg-names: should be "mac" for xHCI MAC - interrupts : interrupt used by the host controller diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt index 1d7c3bc677f7..b8ea394397bf 100644 --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt @@ -44,7 +44,7 @@ Optional properties: Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example if host mode is enabled. The DT binding details of xhci can be found in: -Documentation/devicetree/bindings/usb/mt8173-xhci.txt +Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt Example: ssusb: usb@11271000 { |