diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/mailbox/fsl,mu.txt | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt new file mode 100644 index 000000000000..90e4905dfc69 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt @@ -0,0 +1,34 @@ +NXP i.MX Messaging Unit (MU) +-------------------------------------------------------------------- + +The Messaging Unit module enables two processors within the SoC to +communicate and coordinate by passing messages (e.g. data, status +and control) through the MU interface. The MU also provides the ability +for one processor to signal the other processor using interrupts. + +Because the MU manages the messaging between processors, the MU uses +different clocks (from each side of the different peripheral buses). +Therefore, the MU must synchronize the accesses from one side to the +other. The MU accomplishes synchronization using two sets of matching +registers (Processor A-facing, Processor B-facing). + +Messaging Unit Device Node: +============================= + +Required properties: +------------------- +- compatible : should be "fsl,<chip>-mu", the supported chips include + imx8qxp, imx8qm. +- reg : Should contain the registers location and length +- interrupts : Interrupt number. The interrupt specifier format depends + on the interrupt controller parent. +- #mbox-cells: Must be 0. Number of cells in a mailbox + +Examples: +-------- +lsio_mu0: mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu"; + reg = <0x0 0x5d1b0000 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <0>; +}; |