diff options
Diffstat (limited to 'Documentation')
4 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt index 80b9a94d9a23..8b53273cb22f 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -38,3 +38,23 @@ Example: reg-names = "mux status", "mux mask"; mrvl,intc-nr-irqs = <2>; }; + +* Marvell Orion Interrupt controller + +Required properties +- compatible : Should be "marvell,orion-intc". +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. Supported value is <1>. +- interrupt-controller : Declare this node to be an interrupt controller. +- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. + One entry in the list represents 32 interrupts. + +Example: + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt new file mode 100644 index 000000000000..b5cdd20cde9c --- /dev/null +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -0,0 +1,16 @@ +* Marvell Orion SATA + +Required Properties: +- compatibility : "marvell,orion-sata" +- reg : Address range of controller +- interrupts : Interrupt controller is using +- nr-ports : Number of SATA ports in use. + +Example: + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + nr-ports = <2>; + } diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 05428f39d9ac..e13787498bcf 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -27,3 +27,26 @@ Example: interrupt-controller; #interrupt-cells = <1>; }; + +* Marvell Orion GPIO Controller + +Required properties: +- compatible : Should be "marvell,orion-gpio" +- reg : Address and length of the register set for controller. +- gpio-controller : So we know this is a gpio controller. +- ngpio : How many gpios this controller has. +- interrupts : Up to 4 Interrupts for the controller. + +Optional properties: +- mask-offset : For SMP Orions, offset for Nth CPU + +Example: + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt new file mode 100644 index 000000000000..0b2503ab0a05 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt @@ -0,0 +1,14 @@ +* Marvell Orion Watchdog Time + +Required Properties: + +- Compatibility : "marvell,orion-wdt" +- reg : Address of the timer registers + +Example: + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; |