diff options
Diffstat (limited to 'Documentation/isdn/README.gigaset')
| -rw-r--r-- | Documentation/isdn/README.gigaset | 36 |
1 files changed, 8 insertions, 28 deletions
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 9b1ce277ca3d..f6184b637182 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -48,9 +48,8 @@ GigaSet 307x Device Driver 1.2. Software -------- - The driver works with the Kernel CAPI subsystem as well as the old - ISDN4Linux subsystem, so it can be used with any software which is able - to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data). + The driver works with the Kernel CAPI subsystem and can be used with any + software which is able to use CAPI 2.0 for ISDN connections (voice or data). There are some user space tools available at https://sourceforge.net/projects/gigaset307x/ @@ -92,7 +91,7 @@ GigaSet 307x Device Driver gigaset debug debug level (see section 3.2.) startmode initial operation mode (see section 2.5.): - bas_gigaset ) 1=ISDN4linux/CAPI (default), 0=Unimodem + bas_gigaset ) 1=CAPI (default), 0=Unimodem ser_gigaset ) usb_gigaset ) cidmode initial Call-ID mode setting (see section 2.5.): 1=on (default), 0=off @@ -154,18 +153,10 @@ GigaSet 307x Device Driver 2.3. CAPI ---- - If the driver is compiled with CAPI support (kernel configuration option - GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the - corresponding driver module is loaded, and can then be used with CAPI 2.0 - kernel and user space applications. For user space access, the module - capi.ko must be loaded. - - Legacy ISDN4Linux applications are supported via the capidrv - compatibility driver. The kernel module capidrv.ko must be loaded - explicitly with the command - modprobe capidrv - if needed, and cannot be unloaded again without unloading the driver - first. (These are limitations of capidrv.) + The devices will show up as CAPI controllers as soon as the + corresponding driver module is loaded, and can then be used with + CAPI 2.0 kernel and user space applications. For user space access, + the module capi.ko must be loaded. Most distributions handle loading and unloading of the various CAPI modules automatically via the command capiinit(1) from the capi4k-utils @@ -173,16 +164,6 @@ GigaSet 307x Device Driver Gigaset drivers because it doesn't support more than one module per driver. -2.4. ISDN4Linux - ---------- - If the driver is compiled without CAPI support (native ISDN4Linux - variant), it registers the device with the legacy ISDN4Linux subsystem - after loading the module. It can then be used with ISDN4Linux - applications only. Most distributions provide some configuration utility - for setting up that subsystem. Otherwise you can use some HOWTOs like - http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html - - 2.5. Unimodem mode ------------- In this mode the device works like a modem connected to a serial port @@ -281,8 +262,7 @@ GigaSet 307x Device Driver number. Dialing "***" (three asterisks) calls all extensions simultaneously (global call). - This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode - does not support internal calls. + Unimodem mode does not support internal calls. 2.8. Unregistered Wireless Devices (M101/M105) ----------------------------------------- |