summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/altera/socfpga-system.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/sirf.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/vt8500.txt8
-rw-r--r--Documentation/devicetree/bindings/clock/imx31-clock.txt91
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt205
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt262
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt3
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt17
8 files changed, 596 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
index 07c65e3cdcbe..f4d04a067282 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
@@ -3,9 +3,11 @@ Altera SOCFPGA System Manager
Required properties:
- compatible : "altr,sys-mgr"
- reg : Should contain 1 register ranges(address and length)
+- cpu1-start-addr : CPU1 start address in hex.
Example:
sysmgr@ffd08000 {
compatible = "altr,sys-mgr";
reg = <0xffd08000 0x1000>;
+ cpu1-start-addr = <0xffd080c4>;
};
diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt
index 1881e1c6dda5..c6ba6d3c747f 100644
--- a/Documentation/devicetree/bindings/arm/sirf.txt
+++ b/Documentation/devicetree/bindings/arm/sirf.txt
@@ -1,3 +1,9 @@
-prima2 "cb" evaluation board
+CSR SiRFprimaII and SiRFmarco device tree bindings.
+========================================
+
Required root node properties:
- - compatible = "sirf,prima2-cb", "sirf,prima2";
+ - compatible:
+ - "sirf,prima2-cb" : prima2 "cb" evaluation board
+ - "sirf,marco-cb" : marco "cb" evaluation board
+ - "sirf,prima2" : prima2 device based board
+ - "sirf,marco" : marco device based board
diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt
index d657832c6819..87dc1ddf4770 100644
--- a/Documentation/devicetree/bindings/arm/vt8500.txt
+++ b/Documentation/devicetree/bindings/arm/vt8500.txt
@@ -12,3 +12,11 @@ compatible = "wm,wm8505";
Boards with the Wondermedia WM8650 SoC shall have the following properties:
Required root node property:
compatible = "wm,wm8650";
+
+Boards with the Wondermedia WM8750 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8750";
+
+Boards with the Wondermedia WM8850 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8850";
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
new file mode 100644
index 000000000000..19df842c694f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt
@@ -0,0 +1,91 @@
+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX31
+clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ upll 5
+ mcu_main 6
+ hsp 7
+ ahb 8
+ nfc 9
+ ipg 10
+ per_div 11
+ per 12
+ csi_sel 13
+ fir_sel 14
+ csi_div 15
+ usb_div_pre 16
+ usb_div_post 17
+ fir_div_pre 18
+ fir_div_post 19
+ sdhc1_gate 20
+ sdhc2_gate 21
+ gpt_gate 22
+ epit1_gate 23
+ epit2_gate 24
+ iim_gate 25
+ ata_gate 26
+ sdma_gate 27
+ cspi3_gate 28
+ rng_gate 29
+ uart1_gate 30
+ uart2_gate 31
+ ssi1_gate 32
+ i2c1_gate 33
+ i2c2_gate 34
+ i2c3_gate 35
+ hantro_gate 36
+ mstick1_gate 37
+ mstick2_gate 38
+ csi_gate 39
+ rtc_gate 40
+ wdog_gate 41
+ pwm_gate 42
+ sim_gate 43
+ ect_gate 44
+ usb_gate 45
+ kpp_gate 46
+ ipu_gate 47
+ uart3_gate 48
+ uart4_gate 49
+ uart5_gate 50
+ owire_gate 51
+ ssi2_gate 52
+ cspi1_gate 53
+ cspi2_gate 54
+ gacc_gate 55
+ emi_gate 56
+ rtic_gate 57
+ firi_gate 58
+
+Examples:
+
+clks: ccm@53f80000{
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <0 31 0x04 0 53 0x04>;
+ #clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
new file mode 100644
index 000000000000..0921fac73528
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -0,0 +1,205 @@
+NVIDIA Tegra20 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra20-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+ The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ this case, those clocks are assigned IDs above 95 in order to highlight
+ this issue. Implementations that interpret these clock IDs as bit values
+ within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ explicitly handle these special cases.
+
+ The balance of the clocks controlled by the CAR are assigned IDs of 96 and
+ above.
+
+ 0 cpu
+ 1 unassigned
+ 2 unassigned
+ 3 ac97
+ 4 rtc
+ 5 tmr
+ 6 uart1
+ 7 unassigned (register bit affects uart2 and vfir)
+ 8 gpio
+ 9 sdmmc2
+ 10 unassigned (register bit affects spdif_in and spdif_out)
+ 11 i2s1
+ 12 i2c1
+ 13 ndflash
+ 14 sdmmc1
+ 15 sdmmc4
+ 16 twc
+ 17 pwm
+ 18 i2s2
+ 19 epp
+ 20 unassigned (register bit affects vi and vi_sensor)
+ 21 2d
+ 22 usbd
+ 23 isp
+ 24 3d
+ 25 ide
+ 26 disp2
+ 27 disp1
+ 28 host1x
+ 29 vcp
+ 30 unassigned
+ 31 cache2
+
+ 32 mem
+ 33 ahbdma
+ 34 apbdma
+ 35 unassigned
+ 36 kbc
+ 37 stat_mon
+ 38 pmc
+ 39 fuse
+ 40 kfuse
+ 41 sbc1
+ 42 snor
+ 43 spi1
+ 44 sbc2
+ 45 xio
+ 46 sbc3
+ 47 dvc
+ 48 dsi
+ 49 unassigned (register bit affects tvo and cve)
+ 50 mipi
+ 51 hdmi
+ 52 csi
+ 53 tvdac
+ 54 i2c2
+ 55 uart3
+ 56 unassigned
+ 57 emc
+ 58 usb2
+ 59 usb3
+ 60 mpe
+ 61 vde
+ 62 bsea
+ 63 bsev
+
+ 64 speedo
+ 65 uart4
+ 66 uart5
+ 67 i2c3
+ 68 sbc4
+ 69 sdmmc3
+ 70 pcie
+ 71 owr
+ 72 afi
+ 73 csite
+ 74 unassigned
+ 75 avpucq
+ 76 la
+ 77 unassigned
+ 78 unassigned
+ 79 unassigned
+ 80 unassigned
+ 81 unassigned
+ 82 unassigned
+ 83 unassigned
+ 84 irama
+ 85 iramb
+ 86 iramc
+ 87 iramd
+ 88 cram2
+ 89 audio_2x a/k/a audio_2x_sync_clk
+ 90 clk_d
+ 91 unassigned
+ 92 sus
+ 93 cdev1
+ 94 cdev2
+ 95 unassigned
+
+ 96 uart2
+ 97 vfir
+ 98 spdif_in
+ 99 spdif_out
+ 100 vi
+ 101 vi_sensor
+ 102 tvo
+ 103 cve
+ 104 osc
+ 105 clk_32k a/k/a clk_s
+ 106 clk_m
+ 107 sclk
+ 108 cclk
+ 109 hclk
+ 110 pclk
+ 111 blink
+ 112 pll_a
+ 113 pll_a_out0
+ 114 pll_c
+ 115 pll_c_out1
+ 116 pll_d
+ 117 pll_d_out0
+ 118 pll_e
+ 119 pll_m
+ 120 pll_m_out1
+ 121 pll_p
+ 122 pll_p_out1
+ 123 pll_p_out2
+ 124 pll_p_out3
+ 125 pll_p_out4
+ 126 pll_s
+ 127 pll_u
+ 128 pll_x
+ 129 cop a/k/a avp
+ 130 audio a/k/a audio_sync_clk
+ 131 pll_ref
+ 132 twd
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra20-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car 58>; /* usb2 */
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
new file mode 100644
index 000000000000..f3da3be5fcad
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -0,0 +1,262 @@
+NVIDIA Tegra30 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra30-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+ The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ this case, those clocks are assigned IDs above 160 in order to highlight
+ this issue. Implementations that interpret these clock IDs as bit values
+ within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ explicitly handle these special cases.
+
+ The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ above.
+
+ 0 cpu
+ 1 unassigned
+ 2 unassigned
+ 3 unassigned
+ 4 rtc
+ 5 timer
+ 6 uarta
+ 7 unassigned (register bit affects uartb and vfir)
+ 8 gpio
+ 9 sdmmc2
+ 10 unassigned (register bit affects spdif_in and spdif_out)
+ 11 i2s1
+ 12 i2c1
+ 13 ndflash
+ 14 sdmmc1
+ 15 sdmmc4
+ 16 unassigned
+ 17 pwm
+ 18 i2s2
+ 19 epp
+ 20 unassigned (register bit affects vi and vi_sensor)
+ 21 2d
+ 22 usbd
+ 23 isp
+ 24 3d
+ 25 unassigned
+ 26 disp2
+ 27 disp1
+ 28 host1x
+ 29 vcp
+ 30 i2s0
+ 31 cop_cache
+
+ 32 mc
+ 33 ahbdma
+ 34 apbdma
+ 35 unassigned
+ 36 kbc
+ 37 statmon
+ 38 pmc
+ 39 unassigned (register bit affects fuse and fuse_burn)
+ 40 kfuse
+ 41 sbc1
+ 42 nor
+ 43 unassigned
+ 44 sbc2
+ 45 unassigned
+ 46 sbc3
+ 47 i2c5
+ 48 dsia
+ 49 unassigned (register bit affects cve and tvo)
+ 50 mipi
+ 51 hdmi
+ 52 csi
+ 53 tvdac
+ 54 i2c2
+ 55 uartc
+ 56 unassigned
+ 57 emc
+ 58 usb2
+ 59 usb3
+ 60 mpe
+ 61 vde
+ 62 bsea
+ 63 bsev
+
+ 64 speedo
+ 65 uartd
+ 66 uarte
+ 67 i2c3
+ 68 sbc4
+ 69 sdmmc3
+ 70 pcie
+ 71 owr
+ 72 afi
+ 73 csite
+ 74 pciex
+ 75 avpucq
+ 76 la
+ 77 unassigned
+ 78 unassigned
+ 79 dtv
+ 80 ndspeed
+ 81 i2cslow
+ 82 dsib
+ 83 unassigned
+ 84 irama
+ 85 iramb
+ 86 iramc
+ 87 iramd
+ 88 cram2
+ 89 unassigned
+ 90 audio_2x a/k/a audio_2x_sync_clk
+ 91 unassigned
+ 92 csus
+ 93 cdev2
+ 94 cdev1
+ 95 unassigned
+
+ 96 cpu_g
+ 97 cpu_lp
+ 98 3d2
+ 99 mselect
+ 100 tsensor
+ 101 i2s3
+ 102 i2s4
+ 103 i2c4
+ 104 sbc5
+ 105 sbc6
+ 106 d_audio
+ 107 apbif
+ 108 dam0
+ 109 dam1
+ 110 dam2
+ 111 hda2codec_2x
+ 112 atomics
+ 113 audio0_2x
+ 114 audio1_2x
+ 115 audio2_2x
+ 116 audio3_2x
+ 117 audio4_2x
+ 118 audio5_2x
+ 119 actmon
+ 120 extern1
+ 121 extern2
+ 122 extern3
+ 123 sata_oob
+ 124 sata
+ 125 hda
+ 127 se
+ 128 hda2hdmi
+ 129 sata_cold
+
+ 160 uartb
+ 161 vfir
+ 162 spdif_in
+ 163 spdif_out
+ 164 vi
+ 165 vi_sensor
+ 166 fuse
+ 167 fuse_burn
+ 168 cve
+ 169 tvo
+
+ 170 clk_32k
+ 171 clk_m
+ 172 clk_m_div2
+ 173 clk_m_div4
+ 174 pll_ref
+ 175 pll_c
+ 176 pll_c_out1
+ 177 pll_m
+ 178 pll_m_out1
+ 179 pll_p
+ 180 pll_p_out1
+ 181 pll_p_out2
+ 182 pll_p_out3
+ 183 pll_p_out4
+ 184 pll_a
+ 185 pll_a_out0
+ 186 pll_d
+ 187 pll_d_out0
+ 188 pll_d2
+ 189 pll_d2_out0
+ 190 pll_u
+ 191 pll_x
+ 192 pll_x_out0
+ 193 pll_e
+ 194 spdif_in_sync
+ 195 i2s0_sync
+ 196 i2s1_sync
+ 197 i2s2_sync
+ 198 i2s3_sync
+ 199 i2s4_sync
+ 200 vimclk
+ 201 audio0
+ 202 audio1
+ 203 audio2
+ 204 audio3
+ 205 audio4
+ 206 audio5
+ 207 clk_out_1 (extern1)
+ 208 clk_out_2 (extern2)
+ 209 clk_out_3 (extern3)
+ 210 sclk
+ 211 blink
+ 212 cclk_g
+ 213 cclk_lp
+ 214 twd
+ 215 cml0
+ 216 cml1
+ 217 hclk
+ 218 pclk
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra30-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car 58>; /* usb2 */
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index e9b005dc7625..34c952883276 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -11,6 +11,7 @@ Required properties :
- phy_type : Should be one of "ulpi" or "utmi".
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
+ - nvidia,phy : phandle of the PHY instance, the controller is connected to.
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
@@ -27,3 +28,5 @@ Optional properties:
registers are accessed through the APB_MISC base address instead of
the USB controller. Since this is a legacy issue it probably does not
warrant a compatible string of its own.
+ - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
+ USB ports, which need reset twice due to hardware issues.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
new file mode 100644
index 000000000000..6bdaba2f0aa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -0,0 +1,17 @@
+Tegra SOC USB PHY
+
+The device node for Tegra SOC USB PHY:
+
+Required properties :
+ - compatible : Should be "nvidia,tegra20-usb-phy".
+ - reg : Address and length of the register set for the USB PHY interface.
+ - phy_type : Should be one of "ulpi" or "utmi".
+
+Required properties for phy_type == ulpi:
+ - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+
+Optional properties:
+ - nvidia,has-legacy-mode : boolean indicates whether this controller can
+ operate in legacy mode (as APX 2500 / 2600). In legacy mode some
+ registers are accessed through the APB_MISC base address instead of
+ the USB controller. \ No newline at end of file