diff options
Diffstat (limited to 'Documentation/devicetree')
11 files changed, 13 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index c268debe5b8d..28675b0b80f1 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -60,7 +60,6 @@ properties: maxItems: 2 idt,xtal-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 9000 maximum: 22760 description: Optional load capacitor for XTAL1 and XTAL2 @@ -84,7 +83,6 @@ patternProperties: enum: [ 1800000, 2500000, 3300000 ] idt,slew-percent: description: The Slew rate control for CMOS single-ended. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 80, 85, 90, 100 ] required: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 6f2398cdc82d..1e7894e524f9 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,7 +102,6 @@ patternProperties: st,adc-channel-names: description: List of single-ended channel names. - $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 74244d21d2b3..d41d8743aad4 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -38,6 +38,5 @@ properties: Duration in seconds which the key should be kept pressed for device to reset automatically. Device with key pressed reset feature can specify this property. - $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index cb6498108b78..36c955965d90 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -92,7 +92,6 @@ properties: this interconnect to send RPMh commands. qcom,bcm-voter-names: - $ref: /schemas/types.yaml#/definitions/string-array description: | Names for each of the qcom,bcm-voters specified. diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt index ccebce597f37..a555d94084b7 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt @@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. In these SoCs it's possible to control LEDs both as GPIOs or by hardware. However, on some devices there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or -by hardware using this driver. +as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), +or by hardware using this driver. Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and exporting the 74x164 as spi-gpio prevents those LEDs to be hardware controlled, so the only chance to keep them working is by using this driver. diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt index da5708e7b43b..6e51c6b91ee5 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller This controller is present on BCM6358 and BCM6368. In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 as spi-gpio. -See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware using this driver. Required properties: diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index f1bdaeab4053..ce505a7c006a 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -99,32 +99,26 @@ properties: Indicates that the channel acts as primary among the bonded channels. port: - type: object + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false description: - Child port node corresponding to the data input, in accordance with the - video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - The port node must contain at least one endpoint. + Child port node corresponding to the data input. The port node must + contain at least one endpoint. properties: endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: - remote-endpoint: - description: - A phandle to the remote tuner endpoint subnode in remote node - port. - sync-active: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] description: Indicates sync signal polarity, 0/1 for low/high respectively. This property maps to SYNCAC bit in the hardware manual. The default is 1 (active high). - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 7443490d4cc6..5fe6d3dceb08 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -105,7 +105,6 @@ properties: - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index 01dcd14e7b2a..320a232c7208 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -118,7 +118,7 @@ patternProperties: description: Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, EXTERNAL_SSC or INTERNAL_SSC. - Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] default: 0 diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml index db1aa238cda5..b62c2431f94e 100644 --- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 phys: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to the USB phy monitored-battery: diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index b4c190bddd84..61802a11baf4 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -49,7 +49,7 @@ properties: maxItems: 1 memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to a node describing reserved memory (System RAM memory) The M core can't access all the DDR memory space on some platform, |