diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
24 files changed, 276 insertions, 79 deletions
diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt new file mode 100644 index 000000000000..7839be78448d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4458.txt @@ -0,0 +1,23 @@ +AK4458 audio DAC + +This device supports I2C mode. + +Required properties: + +- compatible : "asahi-kasei,ak4458" +- reg : The I2C address of the device for I2C + +Optional properties: +- reset-gpios: A GPIO specifier for the power down & reset pin +- mute-gpios: A GPIO specifier for the soft mute pin + +Example: + +&i2c { + ak4458: dac@10 { + compatible = "asahi-kasei,ak4458"; + reg = <0x10>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW> + mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH> + }; +}; diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 000000000000..7d67ca6ced80 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,22 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device. + +Optional properties: + +- reset-gpios: A GPIO specifier for the power down & reset pin. + +Example: + +&i2c { + ak5558: adc@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt index 5b54d2d045c3..c3df92d31c4b 100644 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ b/Documentation/devicetree/bindings/sound/da7219.txt @@ -25,6 +25,9 @@ Optional properties: interrupt is to be used to wake system, otherwise "irq" should be used. - wakeup-source: Flag to indicate this device can wake system (suspend/resume). +- #clock-cells : Should be set to '<0>', only one clock source provided; +- clock-output-names : Name given for DAI clocks output; + - clocks : phandle and clock specifier for codec MCLK. - clock-names : Clock name string for 'clocks' attribute, should be "mclk". @@ -83,6 +86,9 @@ Example: VDDMIC-supply = <®_audio>; VDDIO-supply = <®_audio>; + #clock-cells = <0>; + clock-output-names = "dai-clks"; + clocks = <&clks 201>; clock-names = "mclk"; diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt index f7bf65611453..e957b4136716 100644 --- a/Documentation/devicetree/bindings/sound/dmic.txt +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -8,6 +8,7 @@ Required properties: Optional properties: - dmicen-gpios: GPIO specifier for dmic to control start and stop - num-channels: Number of microphones on this DAI + - wakeup-delay-ms: Delay (in ms) after enabling the DMIC Example node: @@ -15,4 +16,5 @@ Example node: compatible = "dmic-codec"; dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; num-channels = <1>; + wakeup-delay-ms <50>; }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index f749e2744824..c60a5732d29c 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -28,7 +28,6 @@ The compatible list for this generic sound card currently: (compatible with CS4271 and CS4272) "fsl,imx-audio-wm8962" - (compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt) "fsl,imx-audio-sgtl5000" (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt) diff --git a/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt b/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt deleted file mode 100644 index acea71bee34f..000000000000 --- a/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt +++ /dev/null @@ -1,53 +0,0 @@ -Freescale i.MX audio complex with WM8962 codec - -Required properties: - - - compatible : "fsl,imx-audio-wm8962" - - - model : The user-visible name of this sound complex - - - ssi-controller : The phandle of the i.MX SSI controller - - - audio-codec : The phandle of the WM8962 audio codec - - - audio-routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. Valid names could be power supplies, WM8962 - pins, and the jacks on the board: - - Power supplies: - * Mic Bias - - Board connectors: - * Mic Jack - * Headphone Jack - * Ext Spk - - - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) - - - mux-ext-port : The external port of the i.MX audio muxer - -Note: The AUDMUX port numbering should start at 1, which is consistent with -hardware manual. - -Example: - -sound { - compatible = "fsl,imx6q-sabresd-wm8962", - "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - ssi-controller = <&ssi2>; - audio-codec = <&codec>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "MICBIAS", "AMIC", - "IN3R", "MICBIAS", - "DMIC", "MICBIAS", - "DMICDAT", "DMIC"; - mux-int-port = <2>; - mux-ext-port = <3>; -}; diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt index 4e3be6682c98..7e1bbd5c27fd 100644 --- a/Documentation/devicetree/bindings/sound/max98090.txt +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -16,6 +16,8 @@ Optional properties: - clock-names: Should be "mclk" +- #sound-dai-cells : should be 0. + - maxim,dmic-freq: Frequency at which to clock DMIC - maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are: diff --git a/Documentation/devicetree/bindings/sound/maxim,max9759.txt b/Documentation/devicetree/bindings/sound/maxim,max9759.txt new file mode 100644 index 000000000000..737a996374d3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max9759.txt @@ -0,0 +1,18 @@ +Maxim MAX9759 Speaker Amplifier +=============================== + +Required properties: +- compatible : "maxim,max9759" +- shutdown-gpios : the gpio connected to the shutdown pin +- mute-gpios : the gpio connected to the mute pin +- gain-gpios : the 2 gpios connected to the g1 and g2 pins + +Example: + +max9759: analog-amplifier { + compatible = "maxim,max9759"; + shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + gain-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 6df87b97f7cb..e2f7f4951215 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -53,7 +53,7 @@ See ../arm/mediatek/mediatek,audsys.txt for details about the parent node. Example: audsys: audio-subsystem@11220000 { - compatible = "mediatek,mt2701-audsys", "syscon", "simple-mfd"; + compatible = "mediatek,mt2701-audsys", "syscon"; ... afe: audio-controller { diff --git a/Documentation/devicetree/bindings/sound/pcm1789.txt b/Documentation/devicetree/bindings/sound/pcm1789.txt new file mode 100644 index 000000000000..3c74ed220ac2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/pcm1789.txt @@ -0,0 +1,22 @@ +Texas Instruments pcm1789 DT bindings + +PCM1789 is a simple audio codec that can be connected via +I2C or SPI. Currently, only I2C bus is supported. + +Required properties: + + - compatible: "ti,pcm1789" + +Required properties on I2C: + + - reg: the I2C address + - reset-gpios: GPIO to control the RESET pin + +Examples: + + audio-codec@4c { + compatible = "ti,pcm1789"; + reg = <0x4c>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 5bed9a595772..b86d790f630f 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -351,6 +351,7 @@ Required properties: - "renesas,rcar_sound-r8a7793" (R-Car M2-N) - "renesas,rcar_sound-r8a7794" (R-Car E2) - "renesas,rcar_sound-r8a7795" (R-Car H3) + - "renesas,rcar_sound-r8a7796" (R-Car M3-W) - reg : Should contain the register physical address. required register is SRU/ADG/SSI if generation1 diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt index 2539e1d68107..e5430d1d34e4 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -22,7 +22,7 @@ Optionnal properties: Example: sound { - compatible = "rockchip,rockchip-audio-es8388"; + compatible = "rockchip,rk3288-hdmi-analog"; rockchip,model = "Analog audio output"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&es8388>; diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt new file mode 100644 index 000000000000..d84557c2686e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt @@ -0,0 +1,29 @@ +ROHM BD28623MUV Class D speaker amplifier for digital input + +This codec does not have any control buses such as I2C, it detect format and +rate of I2S signal automatically. It has two signals that can be connected +to GPIOs: reset and mute. + +Required properties: +- compatible : should be "rohm,bd28623" +- #sound-dai-cells: should be 0. +- VCCA-supply : regulator phandle for the VCCA supply +- VCCP1-supply : regulator phandle for the VCCP1 supply +- VCCP2-supply : regulator phandle for the VCCP2 supply + +Optional properties: +- reset-gpios : GPIO specifier for the active low reset line +- mute-gpios : GPIO specifier for the active low mute line + +Example: + + codec { + compatible = "rohm,bd28623"; + #sound-dai-cells = <0>; + + VCCA-supply = <&vcc_reg>; + VCCP1-supply = <&vcc_reg>; + VCCP2-supply = <&vcc_reg>; + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5651.txt b/Documentation/devicetree/bindings/sound/rt5651.txt index 3875233095f5..b85221864cec 100644 --- a/Documentation/devicetree/bindings/sound/rt5651.txt +++ b/Documentation/devicetree/bindings/sound/rt5651.txt @@ -16,6 +16,23 @@ Optional properties: - realtek,dmic-en Boolean. true if dmic is used. +- realtek,jack-detect-source + u32. Valid values: + 1: Use JD1_1 pin for jack-detect + 2: Use JD1_2 pin for jack-detect + 3: Use JD2 pin for jack-detect + +- realtek,over-current-threshold-microamp + u32, micbias over-current detection threshold in µA, valid values are + 600, 1500 and 2000µA. + +- realtek,over-current-scale-factor + u32, micbias over-current detection scale-factor, valid values are: + 0: Scale current by 0.5 + 1: Scale current by 0.75 + 2: Scale current by 1.0 + 3: Scale current by 1.5 + Pins on the device (for linking into audio routes) for RT5651: * DMIC L1 diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt index 419c89219681..8df170506986 100644 --- a/Documentation/devicetree/bindings/sound/rt5665.txt +++ b/Documentation/devicetree/bindings/sound/rt5665.txt @@ -1,10 +1,10 @@ -RT5665/RT5666/RT5668 audio CODEC +RT5665/RT5666 audio CODEC This device supports I2C only. Required properties: -- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668". +- compatible : One of "realtek,rt5665", "realtek,rt5666". - reg : The I2C address of the device. diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.txt b/Documentation/devicetree/bindings/sound/samsung,odroid.txt index 625b1b18fd02..e9da2200e173 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.txt +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.txt @@ -2,8 +2,10 @@ Samsung Exynos Odroid XU3/XU4 audio complex with MAX98090 codec Required properties: - - compatible - "samsung,odroidxu3-audio" - for Odroid XU3 board, - "samsung,odroidxu4-audio" - for Odroid XU4 board + - compatible - "hardkernel,odroid-xu3-audio" - for Odroid XU3 board, + "hardkernel,odroid-xu4-audio" - for Odroid XU4 board (deprecated), + "samsung,odroid-xu3-audio" - for Odroid XU3 board (deprecated), + "samsung,odroid-xu4-audio" - for Odroid XU4 board (deprecated) - model - the user-visible name of this sound complex - clocks - should contain entries matching clock names in the clock-names property @@ -35,7 +37,7 @@ Required sub-nodes: Example: sound { - compatible = "samsung,odroidxu3-audio"; + compatible = "hardkernel,odroid-xu3-audio"; model = "Odroid-XU3"; samsung,audio-routing = "Headphone Jack", "HPL", diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt index 94442e5673b3..f5ccc12ddc00 100644 --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt @@ -4,9 +4,13 @@ Required properties: - compatible : "samsung,tm2-audio" - model : the user-visible name of this sound complex - - audio-codec : the phandle of the wm5110 audio codec node, - as described in ../mfd/arizona.txt - - i2s-controller : the phandle of the I2S controller + - audio-codec : the first entry should be phandle of the wm5110 audio + codec node, as described in ../mfd/arizona.txt; + the second entry should be phandle of the HDMI + transmitter node + - i2s-controller : the list of phandle and argument tuples pointing to + I2S controllers, the first entry should be I2S0 and + the second one I2S1 - audio-amplifier : the phandle of the MAX98504 amplifier - samsung,audio-routing : a list of the connections between audio components; each entry is a pair of strings, the first being the @@ -22,8 +26,8 @@ Example: sound { compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 0>; model = "wm5110"; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index bf100cd0d0f7..a88cb00fa096 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -7,7 +7,7 @@ Required SoC Specific Properties: - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with secondary fifo, s/w reset control and internal mux for root clk src. - samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for - playback, sterio channel capture, secondary fifo using internal + playback, stereo channel capture, secondary fifo using internal or external dma, s/w reset control, internal mux for root clk src and 7.1 channel TDM support for playback. TDM (Time division multiplexing) is to allow transfer of multiple channel audio data on single data line. @@ -25,7 +25,7 @@ Required SoC Specific Properties: These strings correspond 1:1 with the ordered pairs in dmas. - clocks: Handle to iis clock and RCLK source clk. - clock-names: - i2s0 uses some base clks from CMU and some are from audio subsystem internal + i2s0 uses some base clocks from CMU and some are from audio subsystem internal clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and "i2s_opclk1" as shown in the example below. i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should @@ -36,9 +36,9 @@ Required SoC Specific Properties: - #clock-cells: should be 1, this property must be present if the I2S device is a clock provider in terms of the common clock bindings, described in ../clock/clock-bindings.txt. -- clock-output-names: from the common clock bindings, names of the CDCLK - I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1", - "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices recpectively. +- clock-output-names (deprecated): from the common clock bindings, names of + the CDCLK I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1", + "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices respectively. There are following clocks available at the I2S device nodes: CLK_I2S_CDCLK - the CDCLK (CODECLKO) gate clock, @@ -49,9 +49,10 @@ There are following clocks available at the I2S device nodes: Refer to the SoC datasheet for availability of the above clocks. The CLK_I2S_RCLK_PSR and CLK_I2S_RCLK_SRC clocks are usually only available -in the IIS Multi Audio Interface (I2S0). -Note: Old DTs may not have the #clock-cells, clock-output-names properties -and then not use the I2S node as a clock supplier. +in the IIS Multi Audio Interface. + +Note: Old DTs may not have the #clock-cells property and then not use the I2S +node as a clock supplier. Optional SoC Specific Properties: @@ -59,6 +60,7 @@ Optional SoC Specific Properties: sub system(used in secondary sound source). - pinctrl-0: Should specify pin control groups used for this controller. - pinctrl-names: Should contain only one value - "default". +- #sound-dai-cells: should be 1. Example: @@ -74,9 +76,9 @@ i2s0: i2s@3830000 { <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells; - clock-output-names = "i2s_cdclk0"; + #clock-cells = <1>; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 060cb4a3b47e..9a36c7e2a143 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -5,6 +5,8 @@ Required properties: - reg : the I2C address of the device +- #sound-dai-cells: must be equal to 0 + - clocks : the clock provider of SYS_MCLK - VDDA-supply : the regulator provider of VDDA @@ -40,6 +42,7 @@ Example: codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks 150>; micbias-resistor-k-ohms = <2>; micbias-voltage-m-volts = <2250>; diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt index 6df74f15687f..80fd9a87bb3f 100644 --- a/Documentation/devicetree/bindings/sound/snow.txt +++ b/Documentation/devicetree/bindings/sound/snow.txt @@ -5,8 +5,17 @@ Required properties: "google,snow-audio-max98090" or "google,snow-audio-max98091" or "google,snow-audio-max98095" -- samsung,i2s-controller: The phandle of the Samsung I2S controller -- samsung,audio-codec: The phandle of the audio codec +- samsung,i2s-controller (deprecated): The phandle of the Samsung I2S controller +- samsung,audio-codec (deprecated): The phandle of the audio codec + +Required sub-nodes: + + - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S + controller + - 'codec' subnode with a 'sound-dai' property containing list of phandles + to the CODEC nodes, first entry must be the phandle of the MAX98090, + MAX98091 or MAX98095 CODEC (exact device type is indicated by the compatible + string) and the second entry must be the phandle of the HDMI IP block node Optional: - samsung,model: The name of the sound-card diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index b1acc1a256ba..f301cdf0b7e6 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -45,6 +45,12 @@ SAI subnodes Optional properties: This property sets SAI sub-block as slave of another SAI sub-block. Must contain the phandle and index of the sai sub-block providing the synchronization. + - st,iec60958: support S/PDIF IEC6958 protocol for playback + IEC60958 protocol is not available for capture. + By default, custom protocol is assumed, meaning that protocol is + configured according to protocol defined in related DAI link node, + such as i2s, left justified, right justified, dsp and pdm protocols. + Note: ac97 protocol is not supported by SAI driver The device node should contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in Documentation/devicetree/bindings/ diff --git a/Documentation/devicetree/bindings/sound/tda7419.txt b/Documentation/devicetree/bindings/sound/tda7419.txt new file mode 100644 index 000000000000..6b85ec38dd56 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tda7419.txt @@ -0,0 +1,38 @@ +TDA7419 audio processor + +This device supports I2C only. + +Required properties: + +- compatible : "st,tda7419" +- reg : the I2C address of the device. +- vdd-supply : a regulator spec for the common power supply (8-10V) + +Optional properties: + +- st,mute-gpios : a GPIO spec for the MUTE pin. + +Pins on the device (for linking into audio routes): + + * SE3L + * SE3R + * SE2L + * SE2R + * SE1L + * SE1R + * DIFFL + * DIFFR + * MIX + * OUTLF + * OUTRF + * OUTLR + * OUTRR + * OUTSW + +Example: + +ap: tda7419@44 { + compatible = "st,tda7419"; + reg = <0x44>; + vdd-supply = <&vdd_9v0_reg>; +}; diff --git a/Documentation/devicetree/bindings/sound/uniphier,aio.txt b/Documentation/devicetree/bindings/sound/uniphier,aio.txt new file mode 100644 index 000000000000..4ce68ed6f2f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/uniphier,aio.txt @@ -0,0 +1,45 @@ +Socionext UniPhier SoC audio driver + +The Socionext UniPhier audio subsystem consists of I2S and S/PDIF blocks in +the same register space. + +Required properties: +- compatible : should be one of the following: + "socionext,uniphier-ld11-aio" + "socionext,uniphier-ld20-aio" + "socionext,uniphier-pxs2-aio" +- reg : offset and length of the register set for the device. +- interrupts : should contain I2S or S/PDIF interrupt. +- pinctrl-names : should be "default". +- pinctrl-0 : defined I2S signal pins for an external codec chip. +- clock-names : should include following entries: + "aio" +- clocks : a list of phandle, should contain an entry for each + entry in clock-names. +- reset-names : should include following entries: + "aio" +- resets : a list of phandle, should contain an entry for each + entry in reset-names. +- #sound-dai-cells: should be 1. + +Optional properties: +- socionext,syscon: a phandle, should contain soc-glue. + The soc-glue is used for changing mode of S/PDIF signal pin + to Output from Hi-Z. This property is optional if you use + I2S signal pins only. + +Example: + audio { + compatible = "socionext,uniphier-ld20-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + + socionext,syscon = <&sg>; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8524.txt b/Documentation/devicetree/bindings/sound/wm8524.txt index 20c62002cbcd..0f0553563fc1 100644 --- a/Documentation/devicetree/bindings/sound/wm8524.txt +++ b/Documentation/devicetree/bindings/sound/wm8524.txt @@ -10,7 +10,7 @@ Required properties: Example: -codec: wm8524@0 { +codec: wm8524 { compatible = "wlf,wm8524"; wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; |