diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/dsa.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/marvell.txt | 8 |
2 files changed, 8 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 5fdbbcdf8c4b..9f4807f90c31 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -31,8 +31,6 @@ A switch child node has the following optional property: switch. Must be set if the switch can not detect the presence and/or size of a connected EEPROM, otherwise optional. -- reset-gpios : phandle and specifier to a gpio line connected to - reset pin of the switch chip. A switch may have multiple "port" children nodes diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index cdd70cebdea7..7629189398aa 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -10,10 +10,17 @@ If you need a stable binding, use the old dsa.txt binding. Marvell Switches are MDIO devices. The following properties should be placed as a child node of an mdio device. +The properties described here are those specific to Marvell devices. +Additional required and optional properties can be found in dsa.txt. + Required properties: - compatible : Should be one of "marvell,mv88e6085", - reg : Address on the MII bus for the switch. +Optional properties: + +- reset-gpios : Should be a gpio specifier for a reset line + Example: mdio { @@ -23,5 +30,6 @@ Example: switch0: switch@0 { compatible = "marvell,mv88e6085"; reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; }; }; |