1 files changed, 0 insertions, 85 deletions
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
deleted file mode 100644
index 7f94669e9ebe..000000000000
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-* Temperature Sensor ADC (TSADC) on rockchip SoCs
-
-Required properties:
-- compatible : should be "rockchip,<name>-tsadc"
-   "rockchip,px30-tsadc":   found on PX30 SoCs
-   "rockchip,rv1108-tsadc": found on RV1108 SoCs
-   "rockchip,rk3228-tsadc": found on RK3228 SoCs
-   "rockchip,rk3288-tsadc": found on RK3288 SoCs
-   "rockchip,rk3328-tsadc": found on RK3328 SoCs
-   "rockchip,rk3368-tsadc": found on RK3368 SoCs
-   "rockchip,rk3399-tsadc": found on RK3399 SoCs
-- reg : physical base address of the controller and length of memory mapped
-	region.
-- interrupts : The interrupt number to the cpu. The interrupt specifier format
-	       depends on the interrupt controller.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
-		the peripheral clock.
-- resets : Must contain an entry for each entry in reset-names.
-	   See ../reset/reset.txt for details.
-- reset-names : Must include the name "tsadc-apb".
-- pinctrl-names : The pin control state names;
-- pinctrl-0 : The "init" pinctrl state, it will be set before device probe.
-- pinctrl-1 : The "default" pinctrl state, it will be set after reset the
-	      TSADC controller.
-- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend.
-- #thermal-sensor-cells : Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
-- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
-- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
-			       1:HIGH.
-- rockchip,grf : The phandle of the syscon node for the general register file.
-
-Exiample:
-tsadc: tsadc@ff280000 {
-	compatible = "rockchip,rk3288-tsadc";
-	reg = <0xff280000 0x100>;
-	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
-	clock-names = "tsadc", "apb_pclk";
-	resets = <&cru SRST_TSADC>;
-	reset-names = "tsadc-apb";
-	pinctrl-names = "init", "default", "sleep";
-	pinctrl-0 = <&otp_gpio>;
-	pinctrl-1 = <&otp_out>;
-	pinctrl-2 = <&otp_gpio>;
-	#thermal-sensor-cells = <1>;
-	rockchip,hw-tshut-temp = <95000>;
-	rockchip,hw-tshut-mode = <0>;
-	rockchip,hw-tshut-polarity = <0>;
-};
-
-Example: referring to thermal sensors:
-thermal-zones {
-	cpu_thermal: cpu_thermal {
-		polling-delay-passive = <1000>; /* milliseconds */
-		polling-delay = <5000>; /* milliseconds */
-
-		/* sensor	ID */
-		thermal-sensors = <&tsadc	1>;
-
-		trips {
-			cpu_alert0: cpu_alert {
-				temperature = <70000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "passive";
-			};
-			cpu_crit: cpu_crit {
-				temperature = <90000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		cooling-maps {
-			map0 {
-				trip = <&cpu_alert0>;
-				cooling-device =
-				    <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-	};
-};