1 files changed, 0 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
deleted file mode 100644
index 673cc1831ee9..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* QCOM SoC Temperature Sensor (TSENS)
-
-Required properties:
-- compatible:
-  Must be one of the following:
-    - "qcom,msm8916-tsens" (MSM8916)
-    - "qcom,msm8974-tsens" (MSM8974)
-    - "qcom,msm8996-tsens" (MSM8996)
-    - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404)
-    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
-    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
-  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
-  with version 2 of the TSENS IP. MSM8996 is the only exception because the
-  generic property did not exist when support was added.
-  Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for
-  any SoC with version 1 of the TSENS IP.
-
-- reg: Address range of the thermal registers.
-  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
-  register spaces separately, with order being TM before SROT.
-  See Example 2, below.
-
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
-- #qcom,sensors: Number of sensors in tsens block
-- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
-nvmem cells
-
-Example 1 (legacy support before a fallback tsens-v2 property was introduced):
-tsens: thermal-sensor@900000 {
-		compatible = "qcom,msm8916-tsens";
-		reg = <0x4a8000 0x2000>;
-		nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-		nvmem-cell-names = "caldata", "calsel";
-		#thermal-sensor-cells = <1>;
-	};
-
-Example 2 (for any platform containing v2 of the TSENS IP):
-tsens0: thermal-sensor@c263000 {
-		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-		reg = <0xc263000 0x1ff>, /* TM */
-			<0xc222000 0x1ff>; /* SROT */
-		#qcom,sensors = <13>;
-		#thermal-sensor-cells = <1>;
-	};
-
-Example 3 (for any platform containing v1 of the TSENS IP):
-tsens: thermal-sensor@4a9000 {
-		compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
-		reg = <0x004a9000 0x1000>, /* TM */
-		      <0x004a8000 0x1000>; /* SROT */
-		nvmem-cells = <&tsens_caldata>;
-		nvmem-cell-names = "calib";
-		#qcom,sensors = <10>;
-		#thermal-sensor-cells = <1>;
-	};