diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml new file mode 100644 index 000000000000..6ee19d49fd3c --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom SPI controller + +maintainers: + - Kamal Dasu <kdasu.kdev@gmail.com> + - Rafał Miłecki <rafal@milecki.pl> + +description: | + The Broadcom SPI controller is a SPI master found on various SOCs, including + BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits + of: + MSPI : SPI master controller can read and write to a SPI slave device + BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration + for flash reads and be configured to do single, double, quad lane + io with 3-byte and 4-byte addressing support. + + Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP. + MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance + of a MSPI master without the BSPI to use with non flash slave devices that + use SPI protocol. + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - description: Second Instance of MSPI BRCMSTB SoCs + items: + - enum: + - brcm,spi-bcm7425-qspi + - brcm,spi-bcm7429-qspi + - brcm,spi-bcm7435-qspi + - brcm,spi-bcm7445-qspi + - brcm,spi-bcm7216-qspi + - brcm,spi-bcm7278-qspi + - const: brcm,spi-bcm-qspi + - const: brcm,spi-brcmstb-mspi + - description: Second Instance of MSPI BRCMSTB SoCs + items: + - enum: + - brcm,spi-brcmstb-qspi + - brcm,spi-brcmstb-mspi + - brcm,spi-nsp-qspi + - brcm,spi-ns2-qspi + - const: brcm,spi-bcm-qspi + + reg: + minItems: 1 + maxItems: 5 + + reg-names: + minItems: 1 + maxItems: 5 + items: + - const: mspi + - const: bspi + - enum: [ intr_regs, intr_status_reg, cs_reg ] + - enum: [ intr_regs, intr_status_reg, cs_reg ] + - enum: [ intr_regs, intr_status_reg, cs_reg ] + + interrupts: + minItems: 1 + maxItems: 7 + + interrupt-names: + oneOf: + - minItems: 1 + maxItems: 7 + items: + - const: mspi_done + - const: mspi_halted + - const: spi_lr_fullness_reached + - const: spi_lr_session_aborted + - const: spi_lr_impatient + - const: spi_lr_session_done + - const: spi_lr_overread + - const: spi_l1_intr + + clocks: + maxItems: 1 + description: reference clock for this block + + native-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: Defined when using BE SoC and device uses BE register read/write + +unevaluatedProperties: false + +required: + - reg + - reg-names + - interrupts + - interrupt-names + +examples: + - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access + spi@f03e3400 { + compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi"; + reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>; + reg-names = "mspi", "bspi", "cs_reg"; + interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>; + interrupt-parent = <&gic>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overread"; + clocks = <&hif_spi>; + #address-cells = <0x1>; + #size-cells = <0x0>; + + flash@0 { + #size-cells = <0x2>; + #address-cells = <0x2>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <0x2625a00>; + spi-cpol; + spi-cpha; + }; + }; + - | # BRCMSTB SoC: MSPI master for any SPI device + spi@f0416000 { + clocks = <&upg_fixed>; + compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi"; + reg = <0xf0416000 0x180>; + reg-names = "mspi"; + interrupts = <0x14>; + interrupt-parent = <&irq0_aon_intc>; + interrupt-names = "mspi_done"; + #address-cells = <1>; + #size-cells = <0>; + }; + - | # iProc SoC + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@18027200 { + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x18027200 0x184>, + <0x18027000 0x124>, + <0x1811c408 0x004>, + <0x180273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done"; + clocks = <&iprocmed>; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + - | # NS2 SoC + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@66470200 { + compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; + reg = <0x66470200 0x184>, + <0x66470000 0x124>, + <0x67017408 0x004>, + <0x664703a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_l1_intr"; + clocks = <&iprocmed>; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + spi-cpol; + spi-cpha; + }; + }; |