1 files changed, 0 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
deleted file mode 100644
index 7cfc17e2df31..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic G12A USB3 + PCIE Combo PHY binding
-
-Required properties:
-- compatible:	Should be "amlogic,meson-g12a-usb3-pcie-phy"
-- #phys-cells:	must be 1. The cell number is used to select the phy mode
-  as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
-- reg:		The base address and length of the registers
-- clocks:	a phandle to the 100MHz reference clock of this PHY
-- clock-names:	must be "ref_clk"
-- resets:	phandle to the reset lines for the PHY control
-- reset-names:	must be "phy"
-
-Example:
-	usb3_pcie_phy: phy@46000 {
-		compatible = "amlogic,g12a-usb3-pcie-phy";
-		reg = <0x0 0x46000 0x0 0x2000>;
-		clocks = <&clkc CLKID_PCIE_PLL>;
-		clock-names = "ref_clk";
-		resets = <&reset RESET_PCIE_PHY>;
-		reset-names = "phy";
-		#phy-cells = <1>;
-	};