1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
deleted file mode 100644
index c6995dde641b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Sitronix ST7789V RGB panel with SPI control bus
-
-Required properties:
-  - compatible: "sitronix,st7789v"
-  - reg: Chip select of the panel on the SPI bus
-  - reset-gpios: a GPIO phandle for the reset pin
-  - power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-  - backlight: phandle to the backlight used
-
-The generic bindings for the SPI slaves documented in [1] also applies
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-panel@0 {
-	compatible = "sitronix,st7789v";
-	reg = <0>;
-	reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
-	backlight = <&pwm_bl>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	port {
-		panel_input: endpoint {
-			remote-endpoint = <&tcon0_out_panel>;
-		};
-	};
-};