1 files changed, 0 insertions, 65 deletions
diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt
deleted file mode 100644
index 6d021e71c9cf..000000000000
--- a/Documentation/devicetree/bindings/display/imx/hdmi.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Freescale i.MX6 DWC HDMI TX Encoder
-===================================
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with a companion PHY IP.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-
-Required properties:
-
-- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
-- reg: See dw_hdmi.txt.
-- interrupts: HDMI interrupt number
-- clocks: See dw_hdmi.txt.
-- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
-- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports,
-  numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer.
-  Each port shall have a single endpoint.
-- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI
-  multiplexer control register.
-
-Optional properties
-
-- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
-  or the functionally-reduced I2C master contained in the DWC HDMI. When
-  connected to a system I2C master this property contains a phandle to that
-  I2C master controller.
-
-
-Example:
-
-	gpr: iomuxc-gpr@20e0000 {
-		/* ... */
-	};
-
-        hdmi: hdmi@120000 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                compatible = "fsl,imx6q-hdmi";
-                reg = <0x00120000 0x9000>;
-                interrupts = <0 115 0x04>;
-                gpr = <&gpr>;
-                clocks = <&clks 123>, <&clks 124>;
-                clock-names = "iahb", "isfr";
-                ddc-i2c-bus = <&i2c2>;
-
-                port@0 {
-                        reg = <0>;
-
-                        hdmi_mux_0: endpoint {
-                                remote-endpoint = <&ipu1_di0_hdmi>;
-                        };
-                };
-
-                port@1 {
-                        reg = <1>;
-
-                        hdmi_mux_1: endpoint {
-                                remote-endpoint = <&ipu1_di1_hdmi>;
-                        };
-                };
-        };