1 files changed, 0 insertions, 33 deletions
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
deleted file mode 100644
index 10bd35f9207f..000000000000
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Hisilicon Hip06 Low Pin Count device
-  Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
-  provides I/O access to some legacy ISA devices.
-  Hip06 is based on arm64 architecture where there is no I/O space. So, the
-  I/O ports here are not CPU addresses, and there is no 'ranges' property in
-  LPC device node.
-
-Required properties:
-- compatible:  value should be as follows:
-	(a) "hisilicon,hip06-lpc"
-	(b) "hisilicon,hip07-lpc"
-- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
-- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
-- reg: base memory range where the LPC register set is mapped.
-
-Note:
-  The node name before '@' must be "isa" to represent the binding stick to the
-  ISA/EISA binding specification.
-
-Example:
-
-isa@a01b0000 {
-	compatible = "hisilicon,hip06-lpc";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	reg = <0x0 0xa01b0000 0x0 0x1000>;
-
-	ipmi0: bt@e4 {
-		compatible = "ipmi-bt";
-		device_type = "ipmi";
-		reg = <0x01 0xe4 0x04>;
-	};
-};