summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/arm/ste-nomadik.txt5
-rw-r--r--arch/arm/boot/dts/ste-nomadik-s8815.dts63
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi145
-rw-r--r--arch/arm/configs/nhk8815_defconfig6
-rw-r--r--arch/arm/mach-nomadik/Kconfig1
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c73
-rw-r--r--drivers/clk/clk-nomadik.c41
-rw-r--r--drivers/clocksource/nomadik-mtu.c70
8 files changed, 288 insertions, 116 deletions
diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
index 19bca04b81c9..6256ec31666d 100644
--- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt
+++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
@@ -3,6 +3,11 @@ ST-Ericsson Nomadik Device Tree Bindings
For various board the "board" node may contain specific properties
that pertain to this particular board, such as board-specific GPIOs.
+Required root node property: src
+- Nomadik System and reset controller used for basic chip control, clock
+ and reset line control.
+- compatible: must be "stericsson,nomadik,src"
+
Boards with the Nomadik SoC include:
S8815 "MiniKit" manufactured by Calao Systems:
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 6f82d9368948..f4dfda7db366 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -22,6 +22,43 @@
};
};
+ pinctrl {
+ /* Hog CD pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&cd_default_mode>;
+
+ mmcsd-cd {
+ cd_default_mode: cd_default {
+ cd_default_cfg1 {
+ /* CD input GPIO */
+ ste,pins = "GPIO111_H21";
+ ste,input = <0>;
+ };
+ cd_default_cfg2 {
+ /* CD GPIO biasing */
+ ste,pins = "GPIO112_J21";
+ ste,output = <0>;
+ };
+ };
+ };
+ user-led {
+ user_led_default_mode: user_led_default {
+ user_led_default_cfg {
+ ste,pins = "GPIO2_C5";
+ ste,output = <1>;
+ };
+ };
+ };
+ user-button {
+ user_button_default_mode: user_button_default {
+ user_button_default_cfg {
+ ste,pins = "GPIO3_A4";
+ ste,input = <0>;
+ };
+ };
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
@@ -33,4 +70,30 @@
gpios = <&gpio3 16 0x1>;
};
};
+
+ /* The user LED on the board is set up to be used for heartbeat */
+ leds {
+ compatible = "gpio-leds";
+ user-led {
+ label = "user_led";
+ gpios = <&gpio0 2 0x1>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led_default_mode>;
+ };
+ };
+
+ /* User key mapped in as "escape" */
+ gpio-keys {
+ compatible = "gpio-keys";
+ user-button {
+ label = "user_button";
+ gpios = <&gpio0 3 0x1>;
+ linux,code = <1>; /* KEY_ESC */
+ gpio-key,wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_button_default_mode>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 4a4aab395141..615da8798a0d 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -21,18 +21,23 @@
cache-level = <2>;
};
- mtu0 {
+ mtu0: mtu@101e2000 {
/* Nomadik system timer */
+ compatible = "st,nomadik-mtu";
reg = <0x101e2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <4>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
};
- mtu1 {
+ mtu1: mtu@101e3000 {
/* Secondary timer */
reg = <0x101e3000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <5>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
};
gpio0: gpio@101e4000 {
@@ -45,6 +50,7 @@
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
+ clocks = <&pclk>;
};
gpio1: gpio@101e5000 {
@@ -57,6 +63,7 @@
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
+ clocks = <&pclk>;
};
gpio2: gpio@101e6000 {
@@ -69,6 +76,7 @@
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
+ clocks = <&pclk>;
};
gpio3: gpio@101e7000 {
@@ -81,10 +89,117 @@
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
+ clocks = <&pclk>;
};
pinctrl {
compatible = "stericsson,nmk-pinctrl-stn8815";
+ /* Pin configurations */
+ uart0 {
+ uart0_default_mux: uart0_mux {
+ u0_default_mux {
+ ste,function = "u0";
+ ste,pins = "u0_a_1";
+ };
+ };
+ };
+ uart1 {
+ uart1_default_mux: uart1_mux {
+ u1_default_mux {
+ ste,function = "u1";
+ ste,pins = "u1_a_1";
+ };
+ };
+ };
+ mmcsd {
+ mmcsd_default_mux: mmcsd_mux {
+ mmcsd_default_mux {
+ ste,function = "mmcsd";
+ ste,pins = "mmcsd_a_1";
+ };
+ };
+ mmcsd_default_mode: mmcsd_default {
+ mmcsd_default_cfg1 {
+ /* MCCLK */
+ ste,pins = "GPIO8_B10";
+ ste,output = <0>;
+ };
+ mmcsd_default_cfg2 {
+ /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
+ ste,pins = "GPIO10_C11", "GPIO15_A12",
+ "GPIO16_C13";
+ ste,output = <1>;
+ };
+ mmcsd_default_cfg3 {
+ /* MCCMD, MCDAT3-0, MCMSFBCLK */
+ ste,pins = "GPIO9_A10", "GPIO11_B11",
+ "GPIO12_A11", "GPIO13_C12",
+ "GPIO14_B12", "GPIO24_C15";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c0 {
+ i2c0_default_mode: i2c0_default {
+ i2c0_default_cfg {
+ ste,pins = "GPIO62_D3", "GPIO63_D2";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c1 {
+ i2c1_default_mode: i2c1_default {
+ i2c1_default_cfg {
+ ste,pins = "GPIO53_L4", "GPIO54_L3";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c2 {
+ i2c2_default_mode: i2c2_default {
+ i2c2_default_cfg {
+ ste,pins = "GPIO73_C21", "GPIO74_C20";
+ ste,input = <1>;
+ };
+ };
+ };
+ };
+
+ src: src@101e0000 {
+ compatible = "stericsson,nomadik-src";
+ reg = <0x101e0000 0x1000>;
+ clocks {
+ /*
+ * Dummy clock for primecells
+ */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+ /*
+ * The 2.4 MHz TIMCLK reference clock is active at
+ * boot time, this is actually the MXTALCLK @19.2 MHz
+ * divided by 8. This clock is used by the timers and
+ * watchdog. See page 105 ff.
+ */
+ timclk: timclk@2.4M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <2400000>;
+ };
+ /*
+ * At boot time, PLL2 is set to generate a set of
+ * fixed clocks, one of them is CLK48, the 48 MHz
+ * clock, routed to the UART, MMC/SD, I2C, IrDA,
+ * USB and SSP blocks.
+ */
+ clk48: clk48@48M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ };
+ };
};
/* A NAND flash of 128 MiB */
@@ -97,6 +212,7 @@
<0x41000000 0x2000>, /* NAND Base ADDR */
<0x40800000 0x2000>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+ clocks = <&pclk>;
status = "okay";
partition@0 {
@@ -144,6 +260,8 @@
<&gpio1 30 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default_mode>;
stw4811@2d {
compatible = "st,stw4811";
@@ -158,6 +276,8 @@
<&gpio1 21 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default_mode>;
camera@2d {
compatible = "st,camera";
@@ -180,6 +300,9 @@
<&gpio2 9 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default_mode>;
+
stw4811@2d {
compatible = "st,stw4811-usb";
reg = <0x2d>;
@@ -211,6 +334,10 @@
reg = <0x101fd000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <12>;
+ clocks = <&clk48>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_default_mux>;
};
uart1: uart@101fb000 {
@@ -218,6 +345,10 @@
reg = <0x101fb000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <17>;
+ clocks = <&clk48>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_default_mux>;
};
uart2: uart@101f2000 {
@@ -225,17 +356,23 @@
reg = <0x101f2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <28>;
+ clocks = <&clk48>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
rng: rng@101b0000 {
compatible = "arm,primecell";
reg = <0x101b0000 0x1000>;
+ clocks = <&clk48>, <&pclk>;
+ clock-names = "rng", "apb_pclk";
};
rtc: rtc@101e8000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x101e8000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <10>;
};
@@ -243,6 +380,8 @@
mmcsd: sdi@101f6000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x101f6000 0x1000>;
+ clocks = <&clk48>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <22>;
max-frequency = <48000000>;
@@ -251,6 +390,8 @@
mmc-cap-sd-highspeed;
cd-gpios = <&gpio3 15 0x1>;
cd-inverted;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
};
};
};
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index b01e7632ed2e..35f8cf299fa2 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -81,6 +81,7 @@ CONFIG_PPP_SYNC_TTY=m
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
@@ -96,6 +97,11 @@ CONFIG_DEBUG_GPIO=y
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 9b9d105f194c..5981c3db9b41 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,6 +6,7 @@ config ARCH_NOMADIK
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
+ select CLKSRC_OF
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 59f6ff5c9bae..89e2c03db178 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -27,9 +27,7 @@
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/platform_data/clk-nomadik.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/clocksource.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/of_address.h>
@@ -91,48 +89,6 @@
#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
#define NOMADIK_UART1_VBASE 0xF01FB000
-static unsigned long out_low[] = { PIN_OUTPUT_LOW };
-static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
-static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
-static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
-
-static struct pinctrl_map __initdata nhk8815_pinmap[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
- PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
- /* Hog in MMC/SD card mux */
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
- /* MCCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
- /* MCCMD */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
- /* MCCMDDIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
- /* MCDAT3-0 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
- /* MCDAT0DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
- /* MCDAT31DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
- /* MCMSFBCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
- /* CD input GPIO */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
- /* CD bias drive */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
- /* I2C0 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
- /* I2C1 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
- /* I2C2 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
-};
-
/* This is needed for LL-debug/earlyprintk/debug-macro.S */
static struct map_desc cpu8815_io_desc[] __initdata = {
{
@@ -172,7 +128,7 @@ static void __init cpu8815_timer_init_of(void)
/* We need this to be up now */
nomadik_clk_init();
- mtu = of_find_node_by_path("/mtu0");
+ mtu = of_find_node_by_path("/mtu@101e2000");
if (!mtu)
return;
base = of_iomap(mtu, 0);
@@ -188,7 +144,7 @@ static void __init cpu8815_timer_init_of(void)
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, base);
- nmdk_timer_init(base, irq);
+ clocksource_of_init();
}
static struct fsmc_nand_timings cpu8815_nand_timings = {
@@ -280,28 +236,10 @@ device_initcall(cpu8815_mmcsd_init);
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
- "gpio.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
- "gpio.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
- "gpio.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
- "gpio.3", NULL),
- OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
- "pinctrl-stn8815", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
- "uart0", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
- "uart1", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE,
- "rng", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
- "rtc-pl031", NULL),
OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
- "fsmc-nand", &cpu8815_nand_data),
+ NULL, &cpu8815_nand_data),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
- "mmci", &mmcsd_plat_data),
+ NULL, &mmcsd_plat_data),
{ /* sentinel */ },
};
@@ -311,7 +249,6 @@ static void __init cpu8815_init_of(void)
/* At full speed latency must be >=2, so 0x249 in low bits */
l2x0_of_init(0x00730249, 0xfe000fff);
#endif
- pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
of_platform_populate(NULL, of_default_bus_match_table,
cpu8815_auxdata_lookup, NULL);
}
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 6b4c70f7d23d..4a1ab27ee87f 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -3,46 +3,19 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
+#include <linux/of.h>
/*
* The Nomadik clock tree is described in the STN8815A12 DB V4.2
* reference manual for the chip, page 94 ff.
*/
+static const __initconst struct of_device_id cpu8815_clk_match[] = {
+ { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+ { /* sentinel */ }
+};
+
void __init nomadik_clk_init(void)
{
- struct clk *clk;
-
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
- clk_register_clkdev(clk, "apb_pclk", NULL);
- clk_register_clkdev(clk, NULL, "gpio.0");
- clk_register_clkdev(clk, NULL, "gpio.1");
- clk_register_clkdev(clk, NULL, "gpio.2");
- clk_register_clkdev(clk, NULL, "gpio.3");
- clk_register_clkdev(clk, NULL, "rng");
- clk_register_clkdev(clk, NULL, "fsmc-nand");
-
- /*
- * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
- * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used
- * by the timers and watchdog. See page 105 ff.
- */
- clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT,
- 2400000);
- clk_register_clkdev(clk, NULL, "mtu0");
- clk_register_clkdev(clk, NULL, "mtu1");
-
- /*
- * At boot time, PLL2 is set to generate a set of fixed clocks,
- * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
- * I2C, IrDA, USB and SSP blocks.
- */
- clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
- 48000000);
- clk_register_clkdev(clk, NULL, "uart0");
- clk_register_clkdev(clk, NULL, "uart1");
- clk_register_clkdev(clk, NULL, "mmci");
- clk_register_clkdev(clk, NULL, "ssp");
- clk_register_clkdev(clk, NULL, "nmk-i2c.0");
- clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+ of_clk_init(cpu8815_clk_match);
}
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index e405531e1cc5..7982cb0f25f2 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -13,6 +13,9 @@
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
@@ -188,22 +191,15 @@ static struct irqaction nmdk_timer_irq = {
.dev_id = &nmdk_clkevt,
};
-void __init nmdk_timer_init(void __iomem *base, int irq)
+static void __init __nmdk_timer_init(void __iomem *base, int irq,
+ struct clk *pclk, struct clk *clk)
{
unsigned long rate;
- struct clk *clk0, *pclk0;
mtu_base = base;
- pclk0 = clk_get_sys("mtu0", "apb_pclk");
- BUG_ON(IS_ERR(pclk0));
- BUG_ON(clk_prepare(pclk0) < 0);
- BUG_ON(clk_enable(pclk0) < 0);
-
- clk0 = clk_get_sys("mtu0", NULL);
- BUG_ON(IS_ERR(clk0));
- BUG_ON(clk_prepare(clk0) < 0);
- BUG_ON(clk_enable(clk0) < 0);
+ BUG_ON(clk_prepare_enable(pclk));
+ BUG_ON(clk_prepare_enable(clk));
/*
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
@@ -213,7 +209,7 @@ void __init nmdk_timer_init(void __iomem *base, int irq)
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
- rate = clk_get_rate(clk0);
+ rate = clk_get_rate(clk);
if (rate > 32000000) {
rate /= 16;
clk_prescale = MTU_CRn_PRESCALE_16;
@@ -247,3 +243,53 @@ void __init nmdk_timer_init(void __iomem *base, int irq)
mtu_delay_timer.freq = rate;
register_current_timer_delay(&mtu_delay_timer);
}
+
+void __init nmdk_timer_init(void __iomem *base, int irq)
+{
+ struct clk *clk0, *pclk0;
+
+ pclk0 = clk_get_sys("mtu0", "apb_pclk");
+ BUG_ON(IS_ERR(pclk0));
+ clk0 = clk_get_sys("mtu0", NULL);
+ BUG_ON(IS_ERR(clk0));
+
+ __nmdk_timer_init(base, irq, pclk0, clk0);
+}
+
+static struct of_device_id nmdk_timer_match[] __initconst = {
+ { .compatible = "st,nomadik-mtu" },
+ {}
+};
+
+static void __init nmdk_timer_of_init(void)
+{
+ struct device_node *node;
+ struct clk *pclk;
+ struct clk *clk;
+ void __iomem *base;
+ int irq;
+
+ node = of_find_matching_node(NULL, nmdk_timer_match);
+ if (!node)
+ panic("No timer node");
+
+ base = of_iomap(node, 0);
+ if (!base)
+ panic("Can't remap registers");
+
+ pclk = of_clk_get_by_name(node, "apb_pclk");
+ if (IS_ERR(pclk))
+ panic("could not get apb_pclk");
+
+ clk = of_clk_get_by_name(node, "timclk");
+ if (IS_ERR(clk))
+ panic("could not get timclk");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ __nmdk_timer_init(base, irq, pclk, clk);
+}
+CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
+ nmdk_timer_of_init);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:30:21 +0000