diff options
| -rw-r--r-- | drivers/staging/octeon-usb/octeon-hcd.h | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/staging/octeon-usb/octeon-hcd.h b/drivers/staging/octeon-usb/octeon-hcd.h index ae7ae50071ae..9ed619c93a4e 100644 --- a/drivers/staging/octeon-usb/octeon-hcd.h +++ b/drivers/staging/octeon-usb/octeon-hcd.h @@ -1711,7 +1711,7 @@ union cvmx_usbnx_usbp_ctl_status { * Indicates an internal error was detected during * the BIST sequence. * @tdata_out: PHY Test Data Out. - * Presents either internaly generated signals or + * Presents either internally generated signals or * test register contents, based upon the value of * test_data_out_sel. * @siddq: Drives the USBP (USB-PHY) SIDDQ input. @@ -1737,7 +1737,7 @@ union cvmx_usbnx_usbp_ctl_status { * to D+. When an A/B device is acting as a host * (downstream-facing port), dp_pulldown and * dm_pulldown are enabled. This must not toggle - * during normal opeartion. + * during normal operation. * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY. * This signal enables the pull-down resistance on * the D- line. '1' pull down-resistance is connected @@ -1745,7 +1745,7 @@ union cvmx_usbnx_usbp_ctl_status { * to D-. When an A/B device is acting as a host * (downstream-facing port), dp_pulldown and * dm_pulldown are enabled. This must not toggle - * during normal opeartion. + * during normal operation. * @hst_mode: When '0' the USB is acting as HOST, when '1' * USB is acting as device. This field needs to be * set while the USB is in reset. @@ -1784,7 +1784,7 @@ union cvmx_usbnx_usbp_ctl_status { * Used to activate BIST in the PHY. * @tdata_sel: Test Data Out Select. * '1' test_data_out[3:0] (PHY) register contents - * are output. '0' internaly generated signals are + * are output. '0' internally generated signals are * output. * @taddr_in: Mode Address for Test Interface. * Specifies the register address for writing to or |