diff options
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 111 |
1 files changed, 59 insertions, 52 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 7aff68a4a4df..e70b1ebff60d 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -117,55 +117,52 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { #define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test) -static int e1000_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) +static int e1000_get_link_ksettings(struct net_device *netdev, + struct ethtool_link_ksettings *cmd) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 speed; + u32 speed, supported, advertising; if (hw->phy.media_type == e1000_media_type_copper) { - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_TP); + supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP); if (hw->phy.type == e1000_phy_ife) - ecmd->supported &= ~SUPPORTED_1000baseT_Full; - ecmd->advertising = ADVERTISED_TP; + supported &= ~SUPPORTED_1000baseT_Full; + advertising = ADVERTISED_TP; if (hw->mac.autoneg == 1) { - ecmd->advertising |= ADVERTISED_Autoneg; + advertising |= ADVERTISED_Autoneg; /* the e1000 autoneg seems to match ethtool nicely */ - ecmd->advertising |= hw->phy.autoneg_advertised; + advertising |= hw->phy.autoneg_advertised; } - ecmd->port = PORT_TP; - ecmd->phy_address = hw->phy.addr; - ecmd->transceiver = XCVR_INTERNAL; - + cmd->base.port = PORT_TP; + cmd->base.phy_address = hw->phy.addr; } else { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg); + supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg); - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE | - ADVERTISED_Autoneg); + advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); - ecmd->port = PORT_FIBRE; - ecmd->transceiver = XCVR_EXTERNAL; + cmd->base.port = PORT_FIBRE; } speed = SPEED_UNKNOWN; - ecmd->duplex = DUPLEX_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; if (netif_running(netdev)) { if (netif_carrier_ok(netdev)) { speed = adapter->link_speed; - ecmd->duplex = adapter->link_duplex - 1; + cmd->base.duplex = adapter->link_duplex - 1; } } else if (!pm_runtime_suspended(netdev->dev.parent)) { u32 status = er32(STATUS); @@ -179,30 +176,36 @@ static int e1000_get_settings(struct net_device *netdev, speed = SPEED_10; if (status & E1000_STATUS_FD) - ecmd->duplex = DUPLEX_FULL; + cmd->base.duplex = DUPLEX_FULL; else - ecmd->duplex = DUPLEX_HALF; + cmd->base.duplex = DUPLEX_HALF; } } - ethtool_cmd_speed_set(ecmd, speed); - ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || + cmd->base.speed = speed; + cmd->base.autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; /* MDI-X => 2; MDI =>1; Invalid =>0 */ if ((hw->phy.media_type == e1000_media_type_copper) && netif_carrier_ok(netdev)) - ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : ETH_TP_MDI; + cmd->base.eth_tp_mdix = hw->phy.is_mdix ? + ETH_TP_MDI_X : ETH_TP_MDI; else - ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID; if (hw->phy.mdix == AUTO_ALL_MODES) - ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; + cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; else - ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; + cmd->base.eth_tp_mdix_ctrl = hw->phy.mdix; if (hw->phy.media_type != e1000_media_type_copper) - ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID; + cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID; + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, + advertising); return 0; } @@ -262,12 +265,16 @@ err_inval: return -EINVAL; } -static int e1000_set_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) +static int e1000_set_link_ksettings(struct net_device *netdev, + const struct ethtool_link_ksettings *cmd) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; int ret_val = 0; + u32 advertising; + + ethtool_convert_link_mode_to_legacy_u32(&advertising, + cmd->link_modes.advertising); pm_runtime_get_sync(netdev->dev.parent); @@ -285,14 +292,14 @@ static int e1000_set_settings(struct net_device *netdev, * some hardware doesn't allow MDI setting when speed or * duplex is forced. */ - if (ecmd->eth_tp_mdix_ctrl) { + if (cmd->base.eth_tp_mdix_ctrl) { if (hw->phy.media_type != e1000_media_type_copper) { ret_val = -EOPNOTSUPP; goto out; } - if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && - (ecmd->autoneg != AUTONEG_ENABLE)) { + if ((cmd->base.eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && + (cmd->base.autoneg != AUTONEG_ENABLE)) { e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); ret_val = -EINVAL; goto out; @@ -302,35 +309,35 @@ static int e1000_set_settings(struct net_device *netdev, while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); - if (ecmd->autoneg == AUTONEG_ENABLE) { + if (cmd->base.autoneg == AUTONEG_ENABLE) { hw->mac.autoneg = 1; if (hw->phy.media_type == e1000_media_type_fiber) hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | ADVERTISED_FIBRE | ADVERTISED_Autoneg; else - hw->phy.autoneg_advertised = ecmd->advertising | + hw->phy.autoneg_advertised = advertising | ADVERTISED_TP | ADVERTISED_Autoneg; - ecmd->advertising = hw->phy.autoneg_advertised; + advertising = hw->phy.autoneg_advertised; if (adapter->fc_autoneg) hw->fc.requested_mode = e1000_fc_default; } else { - u32 speed = ethtool_cmd_speed(ecmd); + u32 speed = cmd->base.speed; /* calling this overrides forced MDI setting */ - if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { + if (e1000_set_spd_dplx(adapter, speed, cmd->base.duplex)) { ret_val = -EINVAL; goto out; } } /* MDI-X => 2; MDI => 1; Auto => 3 */ - if (ecmd->eth_tp_mdix_ctrl) { + if (cmd->base.eth_tp_mdix_ctrl) { /* fix up the value for auto (3 => 0) as zero is mapped * internally to auto */ - if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) + if (cmd->base.eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) hw->phy.mdix = AUTO_ALL_MODES; else - hw->phy.mdix = ecmd->eth_tp_mdix_ctrl; + hw->phy.mdix = cmd->base.eth_tp_mdix_ctrl; } /* reset the link */ @@ -2313,8 +2320,6 @@ static int e1000e_get_ts_info(struct net_device *netdev, } static const struct ethtool_ops e1000_ethtool_ops = { - .get_settings = e1000_get_settings, - .set_settings = e1000_set_settings, .get_drvinfo = e1000_get_drvinfo, .get_regs_len = e1000_get_regs_len, .get_regs = e1000_get_regs, @@ -2342,6 +2347,8 @@ static const struct ethtool_ops e1000_ethtool_ops = { .get_ts_info = e1000e_get_ts_info, .get_eee = e1000e_get_eee, .set_eee = e1000e_set_eee, + .get_link_ksettings = e1000_get_link_ksettings, + .set_link_ksettings = e1000_set_link_ksettings, }; void e1000e_set_ethtool_ops(struct net_device *netdev) |