diff options
-rw-r--r-- | MAINTAINERS | 1 | ||||
-rw-r--r-- | drivers/rtc/Kconfig | 9 | ||||
-rw-r--r-- | drivers/rtc/Makefile | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-puv3.c | 286 |
4 files changed, 0 insertions, 297 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 79d70acdf119..e4787ac42153 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13585,7 +13585,6 @@ M: Guan Xuetao <gxt@pku.edu.cn> S: Maintained W: http://mprc.pku.edu.cn/~guanxuetao/linux T: git git://github.com/gxt/linux.git -F: drivers/rtc/rtc-puv3.c PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER M: Tomasz Duszynski <tduszyns@gmail.com> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index b54d87d45c89..f3b8e6dcd879 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1729,15 +1729,6 @@ config RTC_DRV_TEGRA This drive can also be built as a module. If so, the module will be called rtc-tegra. -config RTC_DRV_PUV3 - tristate "PKUnity v3 RTC support" - depends on ARCH_PUV3 - help - This enables support for the RTC in the PKUnity-v3 SoCs. - - This drive can also be built as a module. If so, the module - will be called rtc-puv3. - config RTC_DRV_LOONGSON1 tristate "loongson1 RTC support" depends on MACH_LOONGSON32 diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 0721752c6ed4..880e08a409c3 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -128,7 +128,6 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o -obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o obj-$(CONFIG_RTC_DRV_R7301) += rtc-r7301.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c deleted file mode 100644 index 954b88d2485f..000000000000 --- a/drivers/rtc/rtc-puv3.c +++ /dev/null @@ -1,286 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * RTC driver code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/rtc.h> -#include <linux/bcd.h> -#include <linux/clk.h> -#include <linux/log2.h> -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -static struct resource *puv3_rtc_mem; - -static int puv3_rtc_alarmno = IRQ_RTCAlarm; -static int puv3_rtc_tickno = IRQ_RTC; - -static DEFINE_SPINLOCK(puv3_rtc_pie_lock); - -/* IRQ Handlers */ -static irqreturn_t puv3_rtc_alarmirq(int irq, void *id) -{ - struct rtc_device *rdev = id; - - writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR); - rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF); - return IRQ_HANDLED; -} - -static irqreturn_t puv3_rtc_tickirq(int irq, void *id) -{ - struct rtc_device *rdev = id; - - writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR); - rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF); - return IRQ_HANDLED; -} - -/* Update control registers */ -static void puv3_rtc_setaie(struct device *dev, int to) -{ - unsigned int tmp; - - dev_dbg(dev, "%s: aie=%d\n", __func__, to); - - tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE; - - if (to) - tmp |= RTC_RTSR_ALE; - - writel(tmp, RTC_RTSR); -} - -static int puv3_rtc_setpie(struct device *dev, int enabled) -{ - unsigned int tmp; - - dev_dbg(dev, "%s: pie=%d\n", __func__, enabled); - - spin_lock_irq(&puv3_rtc_pie_lock); - tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE; - - if (enabled) - tmp |= RTC_RTSR_HZE; - - writel(tmp, RTC_RTSR); - spin_unlock_irq(&puv3_rtc_pie_lock); - - return 0; -} - -/* Time read/write */ -static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) -{ - rtc_time64_to_tm(readl(RTC_RCNR), rtc_tm); - - dev_dbg(dev, "read time %ptRr\n", rtc_tm); - - return 0; -} - -static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm) -{ - dev_dbg(dev, "set time %ptRr\n", tm); - - writel(rtc_tm_to_time64(tm), RTC_RCNR); - - return 0; -} - -static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) -{ - struct rtc_time *alm_tm = &alrm->time; - - rtc_time64_to_tm(readl(RTC_RTAR), alm_tm); - - alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE; - - dev_dbg(dev, "read alarm: %d, %ptRr\n", alrm->enabled, alm_tm); - - return 0; -} - -static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) -{ - struct rtc_time *tm = &alrm->time; - - dev_dbg(dev, "set alarm: %d, %ptRr\n", alrm->enabled, tm); - - writel(rtc_tm_to_time64(tm), RTC_RTAR); - - puv3_rtc_setaie(dev, alrm->enabled); - - if (alrm->enabled) - enable_irq_wake(puv3_rtc_alarmno); - else - disable_irq_wake(puv3_rtc_alarmno); - - return 0; -} - -static int puv3_rtc_proc(struct device *dev, struct seq_file *seq) -{ - seq_printf(seq, "periodic_IRQ\t: %s\n", - (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no"); - return 0; -} - -static const struct rtc_class_ops puv3_rtcops = { - .read_time = puv3_rtc_gettime, - .set_time = puv3_rtc_settime, - .read_alarm = puv3_rtc_getalarm, - .set_alarm = puv3_rtc_setalarm, - .proc = puv3_rtc_proc, -}; - -static void puv3_rtc_enable(struct device *dev, int en) -{ - if (!en) { - writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR); - } else { - /* re-enable the device, and check it is ok */ - if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) { - dev_info(dev, "rtc disabled, re-enabling\n"); - writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR); - } - } -} - -static int puv3_rtc_remove(struct platform_device *dev) -{ - puv3_rtc_setpie(&dev->dev, 0); - puv3_rtc_setaie(&dev->dev, 0); - - release_resource(puv3_rtc_mem); - kfree(puv3_rtc_mem); - - return 0; -} - -static int puv3_rtc_probe(struct platform_device *pdev) -{ - struct rtc_device *rtc; - struct resource *res; - int ret; - - dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev); - - /* find the IRQs */ - puv3_rtc_tickno = platform_get_irq(pdev, 1); - if (puv3_rtc_tickno < 0) - return -ENOENT; - - puv3_rtc_alarmno = platform_get_irq(pdev, 0); - if (puv3_rtc_alarmno < 0) - return -ENOENT; - - dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n", - puv3_rtc_tickno, puv3_rtc_alarmno); - - rtc = devm_rtc_allocate_device(&pdev->dev); - if (IS_ERR(rtc)) - return PTR_ERR(rtc); - - ret = devm_request_irq(&pdev->dev, puv3_rtc_alarmno, puv3_rtc_alarmirq, - 0, "pkunity-rtc alarm", rtc); - if (ret) { - dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret); - return ret; - } - - ret = devm_request_irq(&pdev->dev, puv3_rtc_tickno, puv3_rtc_tickirq, - 0, "pkunity-rtc tick", rtc); - if (ret) { - dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret); - return ret; - } - - /* get the memory region */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "failed to get memory region resource\n"); - return -ENOENT; - } - - puv3_rtc_mem = request_mem_region(res->start, resource_size(res), - pdev->name); - - if (puv3_rtc_mem == NULL) { - dev_err(&pdev->dev, "failed to reserve memory region\n"); - ret = -ENOENT; - goto err_nores; - } - - puv3_rtc_enable(&pdev->dev, 1); - - /* register RTC and exit */ - rtc->ops = &puv3_rtcops; - rtc->range_max = U32_MAX; - ret = rtc_register_device(rtc); - if (ret) - goto err_nortc; - - /* platform setup code should have handled this; sigh */ - if (!device_can_wakeup(&pdev->dev)) - device_init_wakeup(&pdev->dev, 1); - - platform_set_drvdata(pdev, rtc); - return 0; - - err_nortc: - puv3_rtc_enable(&pdev->dev, 0); - release_resource(puv3_rtc_mem); - - err_nores: - return ret; -} - -#ifdef CONFIG_PM_SLEEP -static int ticnt_save; - -static int puv3_rtc_suspend(struct device *dev) -{ - /* save RTAR for anyone using periodic interrupts */ - ticnt_save = readl(RTC_RTAR); - puv3_rtc_enable(dev, 0); - return 0; -} - -static int puv3_rtc_resume(struct device *dev) -{ - puv3_rtc_enable(dev, 1); - writel(ticnt_save, RTC_RTAR); - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(puv3_rtc_pm_ops, puv3_rtc_suspend, puv3_rtc_resume); - -static struct platform_driver puv3_rtc_driver = { - .probe = puv3_rtc_probe, - .remove = puv3_rtc_remove, - .driver = { - .name = "PKUnity-v3-RTC", - .pm = &puv3_rtc_pm_ops, - } -}; - -module_platform_driver(puv3_rtc_driver); - -MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip"); -MODULE_AUTHOR("Hu Dongliang"); -MODULE_LICENSE("GPL v2"); |